EdimaxメーカーHP-2002ACの使用説明書/サービス説明書
ページ先へ移動 of 21
.
Copyright © by Edimax T echnology Co, L TD. all rights reserved. No part of this publication may be reproduced, tr ansmitted, transcribed, stored in a retrieval system, or translated into any languag.
1 1. Product Introduction Thank you for purchasing and using Edimax HP-2002A V (or HP-2002AC) PowerLine 200Mbps Ethernet Adapter . This device allows you to use your home or office’ s existing elect.
2 2. Product Package This package cont ains the following components: One PowerLine 200Mbps Ethernet Adapter * 2pcs for one p air kit p ackage One RJ-45 Cable (100cm) * 2pcs for one p air kit .
3 3. LED De finitions LED Light S tatus Description Power (Green) On The device is powered on. Off The device is powered of f. LAN (Green) On The LAN cable is connected to the HomePlug. Off No network connection. Blinking Network traffic transferring or receiving PLC Powerline On The device detects another powerline device.
4 4. Button Definitions Reset Button and Group Button The “Group” pushbutton can help you to create several powerline network groups in LAN . The HomePlug devices in different groups can not communicate with each other via powerline . Press the “Reset” pushbutton on the device for less than 3 seconds to reset it to factory default .
5 4.1.1 Joining a HomePlug Logical Network Connect the new device to the powerlin e. Press the Group pushbutton on the device for less than 3 seconds. Press the Group pushbutton on another device connected to the same medium for less than 3 seconds. W ait a few seconds for the two devices to form a network.
6 5. Hardware Installation Procedure 1. Unpack the p ackage and verify that all the items listed in the previous section are provided. 2. Connect the HomePlug product to the device which you want to add to a powerline network through the Ethernet cable.
7 Picture 2.
8 6. Software Inst allation Procedure The Configuration Utility for Windows 98 SE/Me/2000/XP/Vista ena bles the users to identify HomePlug devices within the powerline network , measures data rate performance, ensures privacy and performs diagnostics by setting user defined secure powerline networks.
9 2. The following screen will be displayed. Click “Next”. 3. Click “Next” to install the utility in the default folder or assign the destination folder where you would like to install the HomePlug utility.
10 4. Click “Finish” to complete the installation..
11 7. Edimax PowerLine Utility Click “S tart” and select “All ProgramsEd imax PowerLine Utility” in your computer , you will find the HomePlug ut ility . Please refer to the following sections for the descriptions of how to use the utility . Note : The Utility can help you to find all ( 14Mbps / 85Mbp s / 200Mbps) Powerline devies.
12 Upper Panel The upper panel shows all local HomePlug devices connected to the computer ’s NIC (Network Interface Card ). In most cases, only one device will be seen.
13 The “DAK” code is the password. Quality: the st atus of the connecti on quality will be shown here. Rate (Mbp s): show the current dat a rate of the HomePlug device. MAC Address: the device’s MAC address will be shown here. Add Button: it is used to add a remote device to the existing network by entering the device password of the devic e.
14 Scan Button : the button is used to perform an immediate search of the HomePlug devices connected to the Po werline network. By default, the utility automatically scans every few sec onds and updates the display screen.
15 devices seen on the top panel of Main screen prior to this will be no longer present in the new network. Y ou have to set the new network name to all local devices. Set All Devices: The button is used to set the new network name (network password) to all HomePlug devices w hose password has been entered for the same logical network.
16 Lower Panel The Lower panel cont ains a history of all remote devices seen on the computer over a certain period of time. All devices that were on the powerline network are listed here along with a few other para meters.
17 Warning (1) Simply plug into a power outlet and do not use a power strip or UPS with the wall mount device (2)This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.
18 ‧ Unplug the device from the wall outle t and refer the product to qualified service personnel for the following conditions : # If liquid has been spilled into the product # If the product has be.
19.
デバイスEdimax HP-2002ACの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Edimax HP-2002ACをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはEdimax HP-2002ACの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Edimax HP-2002ACの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Edimax HP-2002ACで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Edimax HP-2002ACを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はEdimax HP-2002ACの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Edimax HP-2002ACに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちEdimax HP-2002ACデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。