Eizoメーカー630LT-GRの使用説明書/サービス説明書
ページ先へ移動 of 122
F or Microsoft Windo ws CE 2.12 V ersion E Please confirm the version of the software built in eClient, and refer to the suited User's Manual (Refer to the User's Manual Version List on next page). This is the manual for the following software version.
User’ s Man ual V er sion List A handling description changes with versions of the software built in eClient. Please refer to below . NO TE • The v ersion of software b uilt in eClient can be chec ked with a [System]-[ICA] tab of [T er minal Proper ties].
3 SAFETY SYMBOLS This manual uses the safety symbols bel ow . They denote critical information. Please read them carefully . W ARNING Failure to abide b y the information in a W ARNING ma y result in serious in j ur y and can be life threatening.
T ABLE OF CONTENTS 4 T ABLE OF CONTENTS 1. INTR ODUCTION ..................................................................................... 6 1-1. General Description .................................................................................
T ABLE OF CONTE NTS 5 INDEX...................................................................................................... 121.
English 6 1. INTRODUCTIO N 1. INTR ODUCTION Thank you very muc h for purchasing the EIZO eClient 630L T -GR. 1-1. General Description The 630L T -GR is a terminal which displays applications on a Windows T erminal Server (WTS) or a web site and conve ys input by a keyboard or a mouse to the WTS.
English 1. INTRODUCTIO N 7 1-2. Features • Lower TCO* *TCO (T otal Cost of Owne rship) Expense for managing and admini strating computer systems. • Saves Space and Power Co nsumption • Less Heat.
English 8 1. INTRODUCTIO N 1-4. Controls & Connector s Fr ont (1) (2) (3) (4) (1) P ower Switch (2) P ower Indicator Green Operation Screen sav er mode Y ellow P ower sav e mode Off P ower off (Wak e on LAN standby ) NO TE • When tur ning off/on the unit, lea ve the unit off f or a fe w seconds bef ore tur ning it on again.
English 1. INTRODUCTIO N 9 Rear (14) (15) (17) (16) (5) (6) (7) (8) (9) (10) (11) (13) (12) (5) Mouse Connector (6) K e yboard Connector (7) Serial P or t (RS-232C) (8) P arallel Connector (9) P ower .
English 10 1. INTRODUCTIO N 1-5. Over vie w Directions for the 630L T -GR’ s Setu p 2. CONNECTING THE 630L T -GR p.11 3. SETTING UP THE 630L T -GR 3-1. WBT Setup W izard p.14 3-2. Connection p.32 3-3. Dial-Up Connection p.39 4. ADDING & CHANGING A CONNETION NAME 4-1.
English 2. CONNECTING THE 630L T -GR 11 2. CONNECTING THE 630L T -GR This chapter shows how to connec t the 630L T -GR to a WTS. 2-1. Setting up the 630L T -GR Please observe the following cautions when connec ting the 630L T -GR. WA R N I N G Place the 630L T -GR on a strong, stable surface.
English 12 2. CONNECTING THE 630L T -GR 2-2. Connecting the 630L T -GR NO TE • Bef ore connecting the 630L T -GR, confir m the f ollowin g: • The 630L T -GR is turned off . • The WTS is t ur ned on. • Connect the peripherals to the appropriate connectors of the unit.
English 2. CONNECTING THE 630L T -GR 13 3. Plug the power cord into the power connector . WA R N I N G Use the enc losed power cord and connec t to the standar d power outlet of y our country . Be sure to remain within the rated voltage of the power cord.
English 14 3. SETTING UP THE 630L T -GR 3. SETTING U P THE 630L T -GR This chapter presents how to prep are for a connection with a WTS when the 630 L T -GR starts up for the first time. 3-1. WBT Setup Wizard 1. T urn on the power switch. The power indicator turns green.
English 3. SETTING UP THE 630L T -GR 15 2. “T ouch panel calibration” is displayed. Five targets are displayed on the screen. Press the tar gets with a stylus or a fingertip to locate the center of the t ouc h panel. If you accidentally touched the screen in the wrong spot during c alibration, you will distort the touch panel calibration.
English 16 3. SETTING UP THE 630L T -GR 4. “WBT Setup Wizard” is displayed. Click [N ext>]. 5. End User License Agreement page is displayed. Read the content and click [A ccept] to continue.
English 3. SETTING UP THE 630L T -GR 17 6. IP address setting page is displayed. [Y es, use the IP information supplied by DHCP.] ................................... S elect this when us ing DHCP service. All the necessary information of the 630LT-GR including the IP address will be obtained by the DHCP.
English 18 3. SETTING UP THE 630L T -GR 7. IP address page is displayed. [I P Address] ........................ Type the IP address of the unit. [Su bnet Mask]..................... Type the subn et mask of the network. [G ateway] .....................
English 3. SETTING UP THE 630L T -GR 19 8. DNS and WINS setting page is displayed. This check box should be marked when DNS or WINS is used. NO TE • Skip the page b y clicking [N e xt>] if DNS or WINS is not used. If using DNS Click the [E nable DNS] check box to activate this bo x.
English 20 3. SETTING UP THE 630L T -GR 9. Desktop area resolution and color settings page is displayed. Select the preferable display mode from the two available modes: · 1024 x 768 (256 colors) · 1024 x 768 (65,536 colors) Click [N ext>] when finished.
English 3. SETTING UP THE 630L T -GR 21 10. Browser Setup page is displayed. Select [Y es] if you are setting up a web browser con nection. Click [N ext>] when finished.
English 22 3. SETTING UP THE 630L T -GR 11. Browser URLs page is displayed. [H ome Page:] ...................... Type the URL for the page to be displayed when Internet Explorer starts up or the “Home ” button is clicked. [S earch Page:] .........
English 3. SETTING UP THE 630L T -GR 23 12. Preferences page is displayed. [When do you want the br owser to underline hyperlinks?] ................................... Select when you want the hyperlinks to be underlined. [What size font do you want to u se?] .
English 24 3. SETTING UP THE 630L T -GR 13. History and Favorites page is displayed. [Persistent browser c ac he] ... Click the check box if you want the “Histor y” and “Cookies” portions of the browser c ache to persist across Web sessions. [Enable F avorites] .
English 3. SETTING UP THE 630L T -GR 25 14. Proxy server selection page is displayed. [Use p roxy server] ............... Click th e check box if you use proxy server for the web browser connection. [Type the name of the c omputer running the prox y server:] .
English 26 3. SETTING UP THE 630L T -GR 15. Local Printer Setup page is displayed. NO TE • The f ollowing is required to install a local printer ; * A printer is connected to the printer por t or the serial connector of the 630L T - GR. * An RDP protocol is used f or con nection to a WTS.
English 3. SETTING UP THE 630L T -GR 27 16. Printer port selection page is displayed. Select a printer port. The 630L T -GR supports L PT1 and COM1. Click [N ext>].
English 28 3. SETTING UP THE 630L T -GR 17. Printer model selection page is displayed. Select a manufacturer and model of your printer . [U ser Defined] ..................... Click the check box if your printer is not listed. Click [N ext>] when finished.
English 3. SETTING UP THE 630L T -GR 29 19. Printer name setting page is displayed. Name the printer or use the indicated na me. (Some programs do not support the Server and the printer name combinat ions of more than 31 characters.) Click [N ext>] when finished.
English 30 3. SETTING UP THE 630L T -GR 21. Another printer configuration page is displayed. Select [Y es] to configure another printer . Select [No ] to finish printer settings. Click [N ext>] when finished. Refer to step 16 if selecting [Y es]. Refer to step 22 if selecting [No].
English 3. SETTING UP THE 630L T -GR 31 Click [Finish] in the last page to displa y a “T erminal Settings chan ge” dialog box. (This dialog box is di splayed only when there are ch anges in the settings.) Click [Y es] to restart the 630L T -GR to ac tivate the changes.
English 32 3. SETTING UP THE 630L T -GR 3-2. Connection with a LAN card The following details the installation of a LANs connection. NO TE • Please remov e the lid on the side of the 630L T -GR bef ore connecting a LAN card, and then inser t a LAN card to the card slot.
English 3. SETTING UP THE 630L T -GR 33 3. The “Network” page is displayed. Select [Use P PP connection or anothe r network adapter]. Click [Devices] tab. NO TE • [Use P PP connection o r another network adapter] should be selected f or using a LAN card.
English 34 3. SETTING UP THE 630L T -GR 4. The “Devices” page is displayed. Double-click [Network]. 5. “Network Configuration” is displayed. Select a network driver for a LAN card.
English 3. SETTING UP THE 630L T -GR 35 6. The connected network adapter’ s properties are displayed. [IP Address] tab [Obtain an IP address via DHCP] ................................... S elect this to assign an IP address to the unit by a DHCP server.
English 36 3. SETTING UP THE 630L T -GR Connection with a Cisco Air onet 1. Insert the Aironet Card, and “Unide ntified PC Card Adapter” is displayed. Driver Name: ...................... Type “aironet”. Click [OK] when finished. 2. ‘Aironet Wi reless LAN Adapter’ settings page is displayed .
English 3. SETTING UP THE 630L T -GR 37 Click [OK]. (The message below will be displayed. Please follow the message and complete the settings.) Click [OK] to return to the “T erminal Connection Manager” dialo g box. 3. Press “F2” key in the “T erminal Connection Manager”.
English 38 3. SETTING UP THE 630L T -GR NO TE • Double -click the [CISCO Aironet] icon on the “Devices” tab and set the detailed utility as needed. Refer to the inst r u ction of the LAN card for details . Click [OK] to save the settings and clos e the “T erminal Properties” dialog box.
English 3. SETTING UP THE 630L T -GR 39 3-3. Dial-Up Connection The following details the installation of a dial-up connection fo r RAS (Remote Access Service). No restriction of the protocol is made fo r the “Dial-up connec tion”. T o use a dial-up connection requires an RA S server in operation.
English 40 3. SETTING UP THE 630L T -GR 2. “T erminal Properties” is displayed. Click the [Network] tab. 3. The network setting window is displayed.
English 3. SETTING UP THE 630L T -GR 41 4. The dial-up setting window is displayed. NO TE • Enter your inf or mation in the per tinent fiel ds. [Connection N ame] ............ Choose a connection name for a dial-up connection. ([None] indicates no connection n ame chosen.
English 42 3. SETTING UP THE 630L T -GR [D ialing Properties...] ................................... C lick the button to set information of the sender. [When dialing f rom:] .......... Choose the sender’s location. [N ew...] .......................
English 3. SETTING UP THE 630L T -GR 43 [Device Conf igure...] ................................... C lick the button the detailed settings of the modem. (Please refer to the instruction manu al of a modem for settings of the modem.) [Port Settings ] tab [M anual Dial (user supplies dial strings)] .
English 44 3. SETTING UP THE 630L T -GR NO TE • When changing settings in the [Device Proper ties], clic k the [Call Option] tab bef ore clickin g [OK] to close the window . [T CP/IP Settings...] Click the button to set the TCP/IP set tings of the WTS.
English 3. SETTING UP THE 630L T -GR 45 [Primary DNS], [Secondary DNS] ................................... Enter IP address of th e prima r y DNS and IP address of the secondary DNS. [Primary WINS], [Secondary WINS] ...................................
English 46 4. ADDIN G & CHANGING A CONNETION NAME 4. A DDING & CHANGING A CONNETION NAME This chapter shows how to add, delete, and modi fy connection names to a WTS. All the settings are managed in the “ T erminal Connection M anager”. 4-1.
English 4. ADDING & CHANGING A CONNETION NAME 47 In Use of RDP Pr otocol 1. Display [T erminal Connection Manager]. Click the [Configure] tab and [A dd...] to set the connection informa tion of the WTS. 2. Protocol selection dial og box is displayed.
English 48 4. ADDIN G & CHANGING A CONNETION NAME 3. “WTS Connection W izard” is displayed. [Na me] ................................ Type the connection na me to the Server. Name the connection to differentiate the Server from others. [S erver] .
English 4. ADDING & CHANGING A CONNETION NAME 49 4. Automatic Logon setting page is displayed. T ype the name, the password, and the domain name of the WTS beforehand to enable an Automatic Logon to the WTS after connecting. NO TE • If an Automa tic Logon is not needed, click [N ext>].
English 50 4. ADDIN G & CHANGING A CONNETION NAME 5. Specifying an application to r un after connecting to a WTS is displayed. Select whether to display the W indows deskto p screen or start u p an application. [D esktop] .........................
English 4. ADDING & CHANGING A CONNETION NAME 51 6. The last page of the “WTS Conn ection W izard” is displayed on the screen. Click [Finish] to return to the “T er minal Connection Manager” dialog box. The registered connection name is displayed in the “T erminal Connection Manager” dialog box.
English 52 4. ADDIN G & CHANGING A CONNETION NAME In Use of the IC A pr otocol 1. Click the [Configure] tab. Click [A dd...]. 2. “New Connection” dialog box is displayed on the screen. Select “Citrix ICA Client” (ICA). Click [OK] when finished.
English 4. ADDING & CHANGING A CONNETION NAME 53 3. “Specify Connection T ype” dialog box is displayed. [Network Connection] ........ S elect for network connection. [Dial-In Connection] ........... Select for dial-in connection. Click [N ext>] when finished.
English 54 4. ADDIN G & CHANGING A CONNETION NAME [Server Group] .................... Select the WTS Group to connect. (A WTS Group consists of [Primary], [Backup 1], and [Backup 2]. The WTS will be searche d in order of [Primary], [Backup 1], and [Backup 2].
English 4. ADDING & CHANGING A CONNETION NAME 55 5. “Dial-In Devices” dialog box is displayed. NO TE • Enter your inf or mation in the per tinent fiel ds. • A dial-in connection is not a vailab le during a dial-up connection. Disconnect the dial-up connection bef ore making dia l-in connection.
English 56 4. ADDIN G & CHANGING A CONNETION NAME [Connection Preference] [B aud Rate] ......................... Set the data tran smission rate from 110 to 115,200. [D ata Bits]........................... S et the data bits. [P arity] ...........
English 4. ADDING & CHANGING A CONNETION NAME 57 6. A title for the ICA connection page is displayed. T ype a connection name of the WTS. Click [N ext]. 7. An application selection page is displayed. Specify the command line and the working directory of an applicatio n to operate.
English 58 4. ADDIN G & CHANGING A CONNETION NAME 8. Automatic logon settings page is displayed. T ype the name, the password, and the domain name of the WTS beforehand to enable an Automatic logon to the WTS after connecting. NO TE • If an A utomatic Logon is no t needed, click [Ne xt.
English 4. ADDING & CHANGING A CONNETION NAME 59 10. Compression, encryption, and sound settings page is displayed. [Use Printer Configuration Utility] ................................... Click the check box to in stall the printer at the [ICA Client Printer Configurations].
English 60 4. ADDIN G & CHANGING A CONNETION NAME [Encryption Level:].............. Encryp tion level can be selected from RC5 (128 bit - Login Only), basic, RC 5 (40 bit), RC5 (56 bit), RC5 (128 bit). The level becomes higher as the bit gains. RC5 (128 bit - Login Only) indicates the 128 bit level security avail able only at logon.
English 4. ADDING & CHANGING A CONNETION NAME 61 11. Firewall settings page is displayed. NO TE • These settings are eff ective when co nnecting to the WTS through internet. • If no change is made, the settings un der the [Firew all settings] of [Global IC A Client Settings] will be applied (ref er to page 95 for det ails).
English 62 4. ADDIN G & CHANGING A CONNETION NAME This completes the setup of the 630L T -GR for connection to a Server with the ICA protocol. NO TE • Please repeat the step 1 to 11 when y ou adding another connection name.
English 4. ADDING & CHANGING A CONNETION NAME 63 4-2. Deleting a Connection This function deletes an existing Connection Name. 1. Display the “ T erminal Connection Manager ” dialog box. 2. Click the [Configure] T ab. 3. Select the Connection Name you want to delete.
English 64 4. ADDIN G & CHANGING A CONNETION NAME 4-3. Editing a Connection This function modifies attributes of the WTS con nections. 1. Display the “ T erminal Connection Manager ” dialog box. 2. Click the [Configure] T ab. 3. Select the connection you want to modify .
English 4. ADDING & CHANGING A CONNETION NAME 65 • For ICA Connection (Please refer to pages 52 to 61 for each setting.) [Server/Dial-In] tab ...
English 66 4. ADDIN G & CHANGING A CONNETION NAME NO TE • When changing settings in the Dial-In connection, clic k and show the [Call Option] tab of [De vice Proper ties] of t he [Dial-In] tab bef ore clic king [OK] to close the windo w .
English 4. ADDING & CHANGING A CONNETION NAME 67 4-4. Setting an A utostar t Connection This function configures a connection to star t automatically each time the 630L T -GR is turned on. (This function is available for a LAN conne ction.) 1. Display the “T erminal Conn ection Manager” dialog box.
English 68 5. LOGON & LOGOFF 5. LOGON & LOGOFF This chapter shows how to log on to an d log off from a WTS. 5-1. Logon to a WTS / Logoff from a WTS Logon to a WTS 1. T urn on the 630L T -GR. 2. “T erminal Connection Manager” dialog box is displayed.
English 5. LOGON & LOGOFF 69 (1) Connecting and logging on to a WTS through local network; Go to step 3. (2) Connecting and logging on to a WTS with dial-u p connection; Click an active button of a small window on the right bottom of the screen. A dial-up connection is made by clic king the button.
English 70 5. LOGON & LOGOFF Multi Session Y ou can log on to the WTS with the sever al connection names, and switch the acti ve sessions. • Logon 1. Log on with a Connection Name, as following the previous steps. 2. Press [Ctrl] + [Alt] + [E nd] keys after logon.
English 5. LOGON & LOGOFF 71 Logoff fr om the WTS If y our 630L T -GR star ts its operation with a desktop 1. Log off from the WTS. (1) Close a ll applications. (2) Select [Sta rt] on the taskbar . (3) Microsoft Windows NT Server 4.0 T erminal Ser ver Edition: Select [Logoff].
English 72 5. LOGON & LOGOFF If y our 630L T -GR star ts its operation with an application 1. Log off from the WTS. Close applications to log off from the WTS. “T erminal Connection Manager” is displayed. If a dial-up connection is running, click the active button of the win dow on the right bottom of the screen.
English 5. LOGON & LOGOFF 73 5-2. Opening/Closing a Local W e b Br owser Opening a Local Web Br owser 1. T urn on the 630L T -GR. 2. “ T erminal Connection Manager ” dialog box is displayed. Please follow the directions relevant on the networ k environment of the 630L T - GR.
English 74 5. LOGON & LOGOFF Closing a Local W eb Bro wser 1. Close the local web browser . Select [Exit] under the [File] on the menu bar and close the local web browser . (Or click the close button on the title bar of the browser .) “T erminal Connection Manager” is displayed.
English 6. USING THE TERMINAL PROPER TIES 75 6. USING THE TERMINAL PR OPER TIES This chapter presents how to mo dify all settings of the 630L T -GR us ing the “T erminal Properties”. T o display the “T erminal Properties” during logging on, press F2 in the “T erminal Connection Manager” di alog box.
English 76 6. USING THE TERMINA L PR OPERTIES Resetting to Default 1. Click [R eset the terminal to factory-default property settings] check box. 2. The “System Settings Change” dialog box is displayed. Click [Y es]. 3. “T erminal Properties” is displayed.
English 6. USING THE TERMINAL PROPER TIES 77 6-2. Input Devices Settings Click the [Input] tab to modify ke yboard, NumLock Key , mouse characteristics, and touch panel calibration. Ke yboar d Settings [Keyboar d] [Loc ale] ...........................
English 78 6. USING THE TERMINA L PR OPERTIES Mouse Settings Click [Pr operties...] to display the [Mouse Proper ties]. [Button Configuration] ....... A ssigns the primary mouse button and the secondary mouse button. [Speed] ..........................
English 6. USING THE TERMINAL PROPER TIES 79 [Mouse Right Click Emulation] [E nable right click emulation] ................................... Holding stylus for a fixed period of time emulates mouse right button click. Click the [En able ri ght click emulation] check box , set a holding time, and adjust holding sensitivity.
English 80 6. USING THE TERMINA L PR OPERTIES “Calibration measured” window is displ ayed when you finished. Click [Enter] key to accept the settings. Click [OK] to return to the “T ermina l Properties” and save the settings. Click [OK] to close “T erminal Properties” and save the adjustments .
English 6. USING THE TERMINAL PROPER TIES 81 NO TE • Changing the Doub le-clic k speed, and Doub le-clic k width and height When y ou hav e diff iculty with double-cli cking on the touch panel with a stylus (or a finger tip): [Doub le-clic k speed] 1) Click Window’ s [Star t] and select [Settings] - [Control P anel].
English 82 6. USING THE TERMINA L PR OPERTIES 6-3. Colors & P ower Sa ve Settings Click the [Display] tab to modify display pa rameters such as colors, s creen saver , and power save. Resolution and Colors [Desktop Area and Colors] [D etails] ....
English 6. USING THE TERMINAL PROPER TIES 83 Brightness [Contrast/Brightness] [S ettings] ............................. Enables to adjust the brightness of the screen. [E nable Contrast/Brigh tness control from Keyboard] Enables to adjust the brightness/contrast from a Keyboard.
English 84 6. USING THE TERMINA L PR OPERTIES 6-4. Network Settings Click [Network] tab to set network information fo r the 630L T -GR. NO TE • All settings shown h ere are pre viously adjusted on the “WBT Setup Wizard”. • Please set the proper ties depending on the 630L T -G R connection settings.
English 6. USING THE TERMINAL PROPER TIES 85 [DHCP Opt ions...] .............. Click this to receive essential information about the 630LT-GR from the DHCP server e very time the 630LT-GR is turned on. Refer to “Practi cal Setup” on page 107 for details.
English 86 6. USING THE TERMINA L PR OPERTIES NO TE • The [T er minal Settings Cha nge] dialog bo x will not be displa yed wh en [T erminal N ame], [DHCP Opt ions], and [Ad v anced Network…] are changed, though the unit needs to be restar ted to set the adjustment e ff ective .
English 6. USING THE TERMINAL PROPER TIES 87 6-5. Printer Settings Click [Printers] tab Y ou can add, delete and change the se ttings of the printer in this section. NO TE • The 630L suppor ts a LPT1 po r t and COM1 por t. • Use a RDP protocol to set the pr inter' s adjustment.
English 88 6. USING THE TERMINA L PR OPERTIES Adding another printer settings This enables to add a printer when no printer is connec ted to the LPT1 port and COM1 port. 1. Select LPT1 or COM1, and then click [A dd]. 2. “Printer Properties” dialog box is displayed.
English 6. USING THE TERMINAL PROPER TIES 89 Modifying the settings This enables to delete printer settings when a printer is connected to the LPT1 port or COM1 port. 1. Select LPT1 or COM1, and then click [P roperties...]. 2. “Printer Properties” dialog box is displayed.
English 90 6. USING THE TERMINA L PR OPERTIES 6-6. Bro wser Settings Click [W eb] tab to adjust the browser settings of 630L T -GR. [E nable Web Connection] .
English 6. USING THE TERMINAL PROPER TIES 91 [P reference] ......................... Click here to set hyperlink and font size. [When do you want the br owser to underline hyperlinks?] ................................... Select when you want the hyperlinks to be underlined.
English 92 6. USING THE TERMINA L PR OPERTIES [Prox y Information] ............ Click th is for proxy settings. [Access the Internet using a p roxy server] ................................... Click the check box if you use proxy server for the web browser connection.
English 6. USING THE TERMINAL PROPER TIES 93 6-7. Dial-Up (PPP) Connection Settings Click [PPP] tab to adjust the dial-up settings o f 630L T -GR. The following details the installation of a dial-up conn ection to a WTS or a W eb Server . (T o use a dial-up connection requi res an RAS server in operation.
English 94 6. USING THE TERMINA L PR OPERTIES 6-8. ICA Setti ngs Click [ICA] tab to confirm information about Citrix I CA Client version and to change the settings when connecting to the Citrix Server wi th ICA protocol. NO TE • The IC A settings are e ff ectiv e only when the unit is connected to the WTS with ICA protocol.
English 6. USING THE TERMINAL PROPER TIES 95 General Settings of the ICA Connection Y ou can change the settings for the ICA Connection. 1. Click [Settings...]. 2. “Global ICA Client Settings” dialog box is displayed. [Hotkeys] tab ...............
English 96 6. USING THE TERMINA L PR OPERTIES [Firewall Settings] tab ......... Change the settings of Firewa ll and SOCKS proxy server. This setting change is displayed when adding a new connection. NO TE • If connecting a WTS through inter net, the settings should be completed bef ore the WTS is selected.
English 6. USING THE TERMINAL PROPER TIES 97 6-9. Device Settings Click [Device] tab to confirm date/time, LAN card properties, and speakers of the 630L T -GR. Netw ork Adapter Settings Configure the properties of the networ k drivers installed on your device.
English 98 6. USING THE TERMINA L PR OPERTIES Sound Settings Configure the sound properties of the 6 30L T -GR. 1. Double-click the “V olume & Sounds” icon. 2. “V olume & Sounds Properties” is displayed. [Volume] tab ..................
English 6. USING THE TERMINAL PROPER TIES 99 Date/Tim e Settings Configure the date/time prop erties of the 630L T -GR. NO TE • The settings are ref erred when the client ti me z one function of the ICA protocol is eff ective. • Date and time will return to the default settings if the po wer cord is unplugged.
English 100 6. USING THE TERMINAL PROPER TIES 6-10. Product Inf ormation, Security , & Updating Software Click [System] tab to confir m information about the 630L T -GR, to set the security , and to update firmware. Pr oduct Information [Software] [Microsoft Windows CE] .
English 6. USING THE TERMINAL PROPER TIES 101 Security Settings This enables settings on network information of the WTS invisible to prevent from undesirable change. When the security is active, the following settings become. • “T erminal Connection Manager” * [Configure] tab • “T erminal Properties” * [General] tab.
English 102 6. USING THE TERMINAL PROPER TIES CANCELING SETTINGS 1. Display “T erminal Connection Manager”. 2. Press [Ctrl], [A], and [F 2] at the same time. 3. “Enter Security Password” di alog box is displayed. [Password:] ..................
English 6. USING THE TERMINAL PROPER TIES 103 Software Updating Y ou can update the built-in software. NO TE • Bef ore updating, please complete the f ollowing: * Cop y the update file (*.bin) to the accessib le file f older of the FTP Server . * If the WTS is connected with LAN, cl ose all the connections to the FTP Se r v er .
English 104 6. USING THE TERMINAL PROPER TIES 2. The “Software Update” dialog box appears. [S erver:] .............................Ty pe IP address or full domain name of the FTP Server. [U ser Name:]....................... Type the user name to connect the FTP Server.
English 6. USING THE TERMINAL PROPER TIES 105 NO TE • Clicki ng the "Ex ecute automatic software update ." chec k bo x will automatically consult the update file in the location indicated in the "Softw are Update" dialog bo x each time tur ning on the unit.
English 106 6. USING THE TERMINAL PROPER TIES NO TE • F ailing to download results in prog ram's returning to the "Software Update" dialog bo x. * In case of returning to the "Software Update" dialog bo x, confirm such as network settings and redo the [Setti ngs] bef ore clic king [Downl oad].
English 7. PR A CTIC AL SETUP 107 7. PRA CTICAL SETUP By utilizing the DHCP Option function of the DHCP Server , necessary information is supplied by the DHCP Server , and each setting is automatically set every time the unit is turned on. The following information can be obtained by the 630L T -GR.
English 108 7. PRA CTICAL SETUP Hotkeys Disable Colors 256 colors Client Name eClient******(Last 6 di gits of the Mac address) Server Location Automatically Found ICA T ab Firewall Settings Disabled V.
English 7. PR A CTIC AL SETUP 109 DHCP Server Settings Please open DHCP settings to conf igure each DHCP Option as follows. [Key] ................................... Set the value as “E IZO”. (The 630LT-GR will not accept any value but “EIZO”.
English 110 7. PRA CTICAL SETUP NO TE • Making a Registry File to Connect to a WTS/W eb Ser v er . Please ref er to the e xample below , make a registry file, and sa ve it in Unicode f or mat. Please change the italic bold phrases as n ecessar y . - ConnectionName : T ype the con nection name in the “T er minal Conne ction Manager”.
English 7. PR A CTIC AL SETUP 11 1 "StartCmdLineArgs"="/L " ConnectionName "" ......... Command argument to connect to a WTS "StartExe"="WFICACE" ............................. Fixed – Command (executable file) to connect to a WTS "ScreenPercent"="100" .
English 112 7. PRA CTICAL SETUP 630L T -GR Settings The 630L T -GR’ s default setting is set to enable DHCP Options. There is no need for extra settings. After initial setup, confirm the following: • [Use P PP connection or another ne twork adapter]in the [Network] tab of “T erminal Properties” is selected.
English 8. TROUBLESHOO TING 113 8. TR OUBLESHOO TING This page presents problem that can be correct ed by the user . If a problem persists even after applying the suggested reme dies, contact an EIZO dealer . Prob lems P oints to ch eck with possib le solutions 1.
English 114 8. TR OUBLESHOO TING 4. Afterimages appear on the screen. When the screen image has been change d after displaying the same image for a long period, afterimages may appear . Use the screen saver and avoid leaving the screen on all the ti me.
English 9. CLEANING 115 9. CLEANING Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime. NO TE • Ne ve r use thinner , benz ene, alcohol (ethanol, metha nol, or isoprop yl alcohol), abrasiv e cleaners , or other strong solv ents, as these ma y cause damage to the cabinet or LCD panel.
English 116 9. CLEANING Mouse If you find that the pointer on the screen doesn’ t move smoothly , your mouse needs to be cleaned. Periodically clean the mouse for your operation. (1) T urn off the 630L T -GR. (2) T urn the mouse upside down and remove the mouse trackball cover .
English 10. SPECIFICA TIONS 117 10. SPECIFICA TIONS CPU National Semiconductor G eode GX1, 300 MHz Memor y RAM; 64 MB, ROM;32 MB LAN 10BASE-T/100 BASE-TX, W ake On LA N suppor ted CPU and Memor y Spea.
English 118 10. SPECIFICA TIONS W eight 5.7 kg (12.6 lbs.) (without the tilt stand 4.5 kg (9.9 lbs.)) Environ mental Specifications T emperature Operating: 0°C to 35°C (32°F to 95°F) Stor age: -20°C to 60°C (-4°F to 140°F) Humidity 30 % to 80 % R.
English 1 1. REFERENCE 119 1 1. REFERENCE 1 1 -1. Attac hing an Arm Stand The 630L T -GR can be used with an arm stand by removing the tilt stand and attaching the arm stand to the termin al.
English 120 1 1. REFERENCE 3. Attach an arm stand to the 630L T -GR securely . WA R N I N G Install the unit securel y when attaching to an arm stand. When attaching an arm stand, please refer to the user’ s manual of the arm stand and inst all the uni t securely with the enclosed screws.
English INDEX 121 INDEX A ADDING & CHANGING A CONNETI ON NAME ............................................... 46 Administration Console .......................... 102 Application to Run .............................. 50, 57 Attaching an Ar m Stand.
English 122 INDEX R RAS .......................................................... 39 RDP ...................................................46, 47 Ref erence .............................................. 119 Resetting to Default ....................
デバイスEizo 630LT-GRの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Eizo 630LT-GRをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはEizo 630LT-GRの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Eizo 630LT-GRの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Eizo 630LT-GRで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Eizo 630LT-GRを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はEizo 630LT-GRの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Eizo 630LT-GRに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちEizo 630LT-GRデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。