EizoメーカーL66の使用説明書/サービス説明書
ページ先へ移動 of 83
E.
2 CONTENTS CONTENTS PRECA UTIONS __________________________ 4 INTRODUCTION ________________________ 12 About this Manual .................................................. 12 P ackage Contents .................................................. 12 Controls & Connectors .
3 E CONTENTS 3 MAKING USE OF USB (Desktop Stand T ype Only) ______________ 62 4 TR OUBLESHOO TING _________________ 65 5 CLEANING __________________________ 69 6 SPECIFICA TIONS _____________________ 7 0 APPENDIX ______________________________ i Pin Assignment .
4 PRECAUTIONS PRECA UTIONS Location of the caution statements on the back panel. IMPOR T ANT! * The manufacturer is not responsible for damage or malfunction caused by improper connection. The power cord should be connected directly to a standard wall power outlet.
PRECAUTIONS 5 E IMPOR T ANT! T o ensure per sonal safety and proper maintenance. Please read this section and the caution statements on the LCD monitor (refer to the figure above). The diagrams of the LCD shown in this manual represent both the desktop stand type and the free mount type of L66 unless the type is clearly shown.
6 PRECAUTIONS • Keep liquids away fr om the LCD monitor . Spillage into the cabinet may result in fire, electric shock, or equipment damage. If an object or liquid falls/spills into the cabinet, unplug the LCD monitor immediately . Have the unit checked by a qualified service engineer before using it again.
PRECAUTIONS 7 E • Handle the power cord and/or the power unit with care. * Do not place the cord underneath the LCD monitor or other heavy objects. * Do not pull on the cord. * Do not bend, bundle or tie up the cord. * Never attempt to repair a damaged cord.
8 PRECAUTIONS • Preventing fr om causing injur y or breaking the monitor , free mount type LCD monitor must be securely attached to the appropriate mount using the bracket and the screw enclosed. T o attach the mount to the LCD, please read the instruction manual of the mount.
PRECAUTIONS 9 E.
10 PRECAUTIONS • Do not block the ventilation slots on the cabinet. * Do not place books or any other papers on the ventilation slots. * Do not install the monitor in a closed space. * Do not use the monitor laying down or upside down. * Do not remove the tilt-swivel stand.
PRECAUTIONS 11 E.
12 INTRODUCTION About This Manual This manual explains the precautions, features, specifications, and operation of your EIZO LCD monitor . For convenience, a “ScreenManager Quick Reference” guide has been included which shows how to implement basic adjustments with the ScreenManager utility .
E 13 INTRODUCTION Package Contents (Free Mount T ype): • If any of the above-listed items are missing or damaged, please contact your local dealer for assistance. • We recommend that you retain the original packing materials in case of future need.
14 INTRODUCTION Controls & Connector s (Desktop Stand T ype) Front (1) P ower T er minal Co vers for the Optional P eriphera l (2)Input Signal Selection Button Selects one of two D-Sub connectors as the active input. This feature is only used when two computers are connected to the LCD monitor .
E 15 INTRODUCTION Rear (1) Connector Cover Remove the connector cover of the LCD monitor to connect the signal cables. (2) Rear Cover Remove the rear cover of the LCD monitor to connect the signal cables. (3) D-Sub Connector Holder Used to prevent the D-Sub signal cables from becoming loose or disconnected.
16 INTRODUCTION Contr ols & Connectors (Free Mount T ype) Front (1) P ower terminal covers f or the optional peripher al (2) Input Signal Selection Button Selects one of two D-Sub connectors as the active input. This feature is only used when two computers are connected to the LCD monitor .
E 17 INTRODUCTION Rear (1) D-Sub Connector Holder Used to prevent the D-Sub signal cables from becoming loose or disconnected. (2) 2 x D-Sub mini 15 pin Input Connectors (Input Signal 1 and 2) (3) DC IN Connects to the enclosed power unit. (4 ) Maintenance P or t Service use only .
18 1 INST ALLA TION 1-1Connecting up Please read the appropriate pages for the LCD connection. Desktop Stand T ype : F rom P age 19 to 23 F ree Mount T ype: F rom P age 24 to 28 PC Settings Before connecting your PC to the L66 LCD monitor , change the display screen settings (resolution and frequency) in accordance with those below .
E 19 1 INST ALLA TION Connecting the Cables (Desktop Stand T ype) (1) Be sure that the power switches of both the PC and the LCD monitor are OFF . (2) Remove the D-Sub connector holder . a) Hand-loosen the screws at the center of the holder . b) Pull the holder away while squeezing both sides of the holder .
20 1 INST ALLA TION Standard PC graphics board Macintosh Please connect the optional Macintosh adapter to the PC before attaching the signal cable. (6) Replacing the connector cover and the rear cover . a) T o close easily , the LCD monitor should be tilted forward as shown in the diagram.
E 21 1 INST ALLA TION c) Insert the rear cover into the inlets at the bottom of the stand. d) Close the rear cover while pushing the push buttons on the top. (7) Plug the power cord into the power connector in the rear of the LCD monitor . Plug the other end into a power outlet.
22 1 INST ALLA TION (1) T o open easily the LCD monitor should be tilted forward as shown in the diagram. (2) Pull the rear cover clear while pushing the push buttons on the top.
E 23 1 INST ALLA TION Connecting two PCs to the Monitor (Example) The EIZO L66 has two video input signal connectors (2 x D-sub mini 15 pin). The priority switch system allows the user to assign priority to either input signal.
24 1 INST ALLA TION Connecting the Cables (Free Mount T ype) (1) Be sure that the power switches of both the PC and the power unit are OFF . Lay the LCD monitor as shown below . (2) Plug the power unit into the power connector in the rear of the LCD monitor .
E 25 1 INST ALLA TION (4) Plug the signal cable (which is marked “LCD”) into the D-Sub connector (Signal 1) at the rear of the monitor . Please ensure that the arrow mark on the casing of the connector is visible when connecting.
26 1 INST ALLA TION - The height of the upper row shall be less than or equal to 500 mm in relation to the desk surface when the arm-stnad is in its lowest position. (Example) • Use a VESA appro ved ar m-stand. - The LCD panel requires 100 mm x 100 mm hole spacing on the arm mounting pad.
E 27 1 INST ALLA TION (8) Plug the power cord into the power unit, and plug the other into a power outlet. • In case of setting the plural free mount type monitors, please be sure to observe the followings. * Do not pile the power units. * Set the power units at minimum intervals of 20 mm.
28 1 INST ALLA TION Input signal selection button MD-C91 Macintosh Adapter DSCR-153 (optional) Apple Macintosh PC compatible Connecting two PCs to the Monitor (Example) The EIZO L66 has two video input signal connectors (2 x D-sub mini 15 pin). The priority switch system allows the user to assign priority to either input signal.
E 29 2 USING THE SCREENMANA GER 2-1 How to use the ScreenManager About ScreenManager As shown on the display , the ScreenManager is used to adjust the LCD monitor . Adjustments are made using the Enter and Control buttons (up, down, right and left) located on the front panel.
30 2 USING THE SCREENMANAGER Icon Menus Functions Reference Screen menu Each display mode can have various screen parameters adjusted to enhance viewing. There are: * Clock * Phase * Position * Resolution * Contrast / Brightness Ch. 3 (pg. 27) Color menu Use this menu to select color mode: 1, 2 or 3.
E 31 2 USING THE SCREENMANA GER Icon Menus Functions Information menu Use this feature to review the current ScreenManager settings. The menu contains four pages.
32 2 USING THE SCREENMANAGER How to use the ScreenManager Entering the ScreenManager Push the Enter button once to display the main menu of the ScreenManager . Enter the Settings (1) T o enter any sub menu icon, highlight the desired icon by using the Control buttons (up, down, right and left) and push the Enter button.
E 33 2 USING THE SCREENMANA GER • Return & Exit icons T o return to the main menu from the sub menu or exit the ScreenManager , select this icon and push the Enter button. Shortcut keys Brightness and contrast can be adjusted directly without any need to enter the ScreenManager .
34 2 USING THE SCREENMANAGER 2-2 Screen Adjustment About Screen Adjustments Entering the ScreenMananger , select the “Screen” icon and push the Enter button to show the “Screen” menu. “Screen” adjustments for the LCD monitor should be used in suppressing screen flickering and also for adjusting the screen to its proper position.
E 35 2 USING THE SCREENMANA GER mode 1 VGA 640 x 480 (60 Hz) 2 VGA 720 x 400 (70 Hz) 3 VESA 640 x 480 (72Hz) 4 VESA 640 x 480 (75 Hz) 5 VESA 640 x 480 (85 Hz) 6 VESA 800 x 600 (56 Hz) 7 VESA 800 x 600.
36 2 USING THE SCREENMANAGER Adjustment Procedure Overview • Allow the LCD monitor to warm up for at least 20 minutes before making adjustments. • For maximum viewing comfort, it is suggested that the monitor be tilted to eye level.
E 37 2 USING THE SCREENMANA GER Procedure Please adjust the screen using the following procedure. (1) Having read the “readme.txt” file, install and run the “Screen Adjustment Program” in the utility disk. Step by step adjustment is provided by the wizard guide.
38 2 USING THE SCREENMANAGER (3) Entering the ScreenManager “Screen” menu. (4) “Clock” Adjustment a ) Select the “Clock” icon and push the Enter button to enter the “Clock” menu. b) If vertical bars of distortion on the screen appear , these can be eliminated by adjusting the right and left buttons.
E 39 2 USING THE SCREENMANA GER.
40 2 USING THE SCREENMANAGER (7) Confirm the “Resolution”. a ) Select the “Resolution” icon and push the Enter button to enter the “Resolution” menu.
E 41 2 USING THE SCREENMANA GER (9 ) Exit the ScreenManager a ) T o return to the main menu, select the “Return” icon or push the down button twice, followed by the Enter button. b) T o exit the ScreenManager , select the “Exit” icon and push the Enter button.
42 2 USING THE SCREENMANAGER 2. Phase Adjustment This feature eliminates the horizontal bars of distortion. The phase adjustment decides the sampling point for converting the analog input signal to a digital signal. Adjusting the “Phase” after the “Clock” adjustment will produce a clear screen.
E 43 2 USING THE SCREENMANA GER 18 preset timings have been committed to memory . In addition to these settings, a screen can be displayed correctly using the “Clock”, “Phase” and “Position.
44 2 USING THE SCREENMANAGER * In the case of the percentage color flickering between orange and white, please note that this is not an error but actually the most optimum adjustment point. * The brightness of the entire screen is controlled by changing the “Brightness” controls.
E 45 2 USING THE SCREENMANA GER 2-3 Color Adjustment About Color Adjustments Entering the ScreenManager , select the “Color” icon and push the enter button to show the “Color” menu. The ScreenManager “Color” menu provides 3 color setting modes; 1, 2, and 3.
46 2 USING THE SCREENMANAGER Custom Color Adjustments B,8.5eing the red, green and blue cm Coltones fColeach mode, c˝(Cusnts)T0 -1..00D EXı˝-03ı˝0 T[(cm Cos can be defined. Please use this function when high precision cm CoGER)]TT* EXı˝-.001 Tcı˝-68.
E 47 2 USING THE SCREENMANA GER • After making the color settings, re-adjust the contrast to get the best definition and color intensity for the displayed image. • “Reset” Y ou can recall the default color gain setting f or the current color mode (1, 2, 3) using the “Reset” icon.
48 2 USING THE SCREENMANAGER 2-4 P ower-sa ve Setup About P owerManager Entering the ScreenManager , select the “PowerManager” icon and push the Enter button to show the “PowerManager” menu. The PowerManager feature automatically reduces the monitor’ s power consumption during idle periods in accordance with the PCs ScreenSaver software.
E 49 2 USING THE SCREENMANAGER Set-up Procedure Set the monitor’ s power saving environment to match the PC’ s Scr eenSaver software. • For the PC setup , please refer to the user’ s manuals of the PC and the graphics board. There are two power saving settings for the monitor .
50 2 USING THE SCREENMANAGER VESA DPMS System 1) First, make the appropriate settings for the PC. (See note, page 49.) 2) Then select “VESA DPMS”. 3) Set the delay period, which is the interval that the monitor will wait after receiving a power -save signal from the PC, before entering into Power Saving Mode.
E 51 2 USING THE SCREENMANAGER EIZO MPMS System 1) First make the appropriate ScreenSaver settings (Macintosh/Energy Saver) for the PC. 2) Then select “EIZO MPMS”. 3) Set the delay time. This is the interval between the time that the ScreenSaver (Macintosh/EnergySaver) blanks the screen and the time that the monitor enters power saving mode.
52 2 USING THE SCREENMANAGER What is VESA DPMS? The acronym VESA stands for “Video Electronics Standards Association,” and DPMS stands for “Display Power Management Signaling.” DPMS is a communication standard that PCs and graphics boards use to implement power savings at the monitor side.
E 53 2 USING THE SCREENMANAGER 2-5 Other Settings About Other Settings Entering the ScreenManager , select the “Others” icon and push the Enter button to show the “Others” menu. All of the icons shown in the ScreenManager “Others” menu are described below .
54 2 USING THE SCREENMANAGER What is the “Screen Size ” setup function? The LCD panel consists of a fixed number of pixel elements which are illuminated to form the screen image. The EIZO L66 display panel consists of the following pixel elements: 1280 horizontal pixels and 1024 vertical pixels.
E 55 2 USING THE SCREENMANAGER Border Intensity This function is used for changing the brightness of the black area sur - rounding the displayed image. Adjustment Procedure Please adjust the border intensity using the following procedure: (1) Select the “Border Intensity” icon and push the Enter button to display the adjustment menu.
56 2 USING THE SCREENMANAGER Input Priority This function is used to select which PC will have priority to control the monitor when utilizing two PCs. As you can see in the picture, there are three settings available: “Signal 1”, “Signal 2” or “Manual”.
E 57 2 USING THE SCREENMANAGER 1 The Input Priority function does not automatically re-activate when the monitor has been in the power saving mode. 2 The Input selection button on the front panel can be used to select either Signal 1 or Signal 2 as the active input at an y time.
58 2 USING THE SCREENMANAGER Setup Procedure (1) Select the “Off Timer” icon and press the Enter button to display “Off T imer” select menu. (2) Select “Enable” and press the enter button. (3) Press the right/left key to adjust how long (1 to 23 hours) the monitor should be in the “On Period”.
E 59 2 USING THE SCREENMANAGER Beep Use this feature to set the beeper On or Off. If the beeper is On, the LCD monitor will generate beep signals as defined below . If the beeper is Off, the monitor will not beep. Short beep • ScreenManager item selected.
60 2 USING THE SCREENMANAGER Menu P osition Use this function to adjust the position of the ScreenManager menu. Procedure f or Menu Position Selection Please set the Menu Position using the following procedure: (1) Select the “Menu Position” icon and push the Enter button to display the adjustment menu.
E 61 2 USING THE SCREENMANAGER Procedure for Reset Selection Please reset the default using the following procedure: (1) Select the “Reset” icon and push the Enter button to show the adjustment menu. (2) Select “Reset” using the up and down buttons.
62 3 MAKING USE OF USB (Desktop Stand T ype Only) The Desktop Stand T ype provides a hub which supports the USB (Universal Serial Bus) standard. When connecting to a USB compliant PC or another hub, the monitor functions as a hub to which USB compliant peripherals can be connected.
E 63 3 MAKING USE OF USB 3) Select “Search for the best driver for your device (recommended).” and click “OK”. 4) Insert the Windows 98 CD-ROM. 5) Select “specify a location” and choose the driver where W indows 98 is installed (e.g., select c: if Windows 98 is in C drive), and click “Next”.
64 3 MAKING USE OF USB USB Specifications USB standard Rev . 1.0 complied self-powered hub Downstream power supply 500 mA for each (Max.) Communication speed 12 Mbps (full), 1.5 Mbps (low) USB ports Upstream port x 1 Downstream ports x 4 T roubleshooting P oints to check with possible solutions Check that the USB cable is correctly connected.
E 65 4 TROUBLESHOOTING 4 TR OUBLESHOO TING P oints to check with possible solutions Check that the power cord is securely connected. T ry pressing a key on the keyboard, or clicking the mouse. (The screen-saver software may be active.) T ry pressing the power button.
66 4 TROUBLESHOO TING Points to c heck with possible solutions Push the Auto adjustment button. See page 37. Confirm the display resolution using the “Resolution” icon in the ScreenManager “Screen” menu. If the resolution is different from the selected display mode, adjust the resolution.
E 67 4 TROUBLESHOOTING Prob lems 4) Horizontal bars of distortion appear . 5) The screen is too bright or too dark. 6) After -images appear . (7) The screen has defective pixels (e.g. slightly light or dark). n Others Prob lems 1) The screen is unable to be enlarged.
68 4 TROUBLESHOO TING • For problems with USB function, refer to the troubleshooting on page 64. Problems 5) The Auto adjustment button does not work properly . 6) Frequency does not change after installing “Monitor information file” in the attached utility disk on Windows 95/98.
E 69 5 CLEANING 5 CLEANING W ARNING CA UTION • Keep liquids awa y from the monitor . Spillage into the cabinet may result in fire , electr ic shock, or equip- ment damage . If an object or liquid falls/spills into the cabinet, unplug the monitor immediately .
70 6 SPECIFICA TIONS 6 SPECIFICA TIONS L66 (Desktop Stand T ype) Electrical Specifications LCD Panel 46 cm (18.1 inch), TFT color LCD panel 0.28 mm dot pitch, Anti-Glare Hard Coating Viewing Angle Hor.
E 71 6 SPECIFICA TIONS L66 (Free Mount T ype) Electrical Specifications LCD Panel 46 cm (18.1 inch), TFT color LCD panel 0.28 mm dot pitch, Anti-Glare Hard Coating V iewing Angle Horizontal: 140°, V .
.
ii APPENDIX APPENDIX Pin Assignment Pin-Belegung Affectation des Br oches 2 x D-Sub mini 15 pin connectors Pin No. Signal Pin No . Signal 1 Red video 9 No pin 2 Green video 1 0 Ground 3 Blue video 11 (shor ted) 4 Ground 12 Data 5 Ground 13 H. Sync 6 Red ground 14 V .
iii APPENDIX A Preset Timing Char t Timing-Übersic hten Synchr onisation des Signaux Based on the signal diagram shown below , 18 factory presets have been registered in the monitor's microprocessor . Der integrierte Mikroprozessor des Monitors unterstützt 18 werkseitige Standardeinstellungen (siehe hierzu die nachfolgenden Diagramme).
iv APPENDIX Mode Dot Clock F requencies A: F ront Porch B: Sync Period HV HV HV µs/Dot ms/Line µs/Dot ms/Line VG A 640 x 480 25.175 MHz 31.468 kHz 59.941 Hz 0.636/16 0.318/10 3.813/96 0.054/2 VG A 720 x 400 28.322 MHz 31.468 kHz 70.087 Hz 0.636/18 0.
v APPENDIX A C: Back P orch D: Blanking P er iod E:Displa y P eriod F:T otal Cycle HV H V H V H V µs/Dot ms/Line µs/Dot ms/Line µs/Dot ms/Line µs/Dot ms/Line 1.907/48 1.048/33 6.356/156 1.430/45 25.442/640 15.254/480 31.778/800 16.683/525 1.907/54 1.
vi APPENDIX FRONT VIEW VORDERANSICHT VUE DE F ACE SIDE VIEW SEITENANSICHT VUE DE COTE TOP VIEW DRAUFSICHT VUE D'EN HAUT Dimensions Abmessungen Dimensions Desktop Stand T ype LCD Monitor mm (inches) 14. 7 (375) 17. 5 (4 45) () 4 1. 30 69 3 () 1 1.
vii APPENDIX A SIDE VIEW SEITENANSICHT VUE DE COTE TOP VIEW DRAUFSICHT VUE D'EN HAUT Free Mount T ype LCD Monitor mm (inches) FRONT VIEW VORDERANSICHT VUE DE F ACE 14. 7 (37 5) () 4 1. 30 69 3 () 1 1.2 55 (. 1 2) () 34. 5 1.3 84 (3.3) 41 (1.8) 9 .
Congratulations! Y ou have just purchased a TCO’99 approved and labelled product! Y our choice has provided you with a product developed for professional use. Y our purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products.
Environmental requirements Flame retardants Flame retardants are present in printed circuit boards, cables, wires, casings and housings. Their purpose is to prevent, or at least to delay the spread of fire. Up to 30% of the plastic in a computer casing can consist of flame retardant substances.
For Europe, etc. (220-240 V ac) Only CE Marking Declaration of Conformity Kind of equipment: Monitor T ype-designation: L66 (Model No. F A-1880) is in compliance with: Council Directive 73/23/EEC EN60.
For Europe, etc. (220-240 V ac) Only CE Marking Declaration of Conformity Kind of equipment: Monitor T ype-designation: L66 (Model No. F A-1881) is in compliance with: Council Directive 73/23/EEC EN60.
FCC Declaration of conformity W e, the Responsible Party EIZO Nanao T echnologies Inc. 5710 W arland Drive, Cypr ess, CA 90630 Phone: (562) 431-5011 declare that the product T rade name: EIZO Model: F.
デバイスEizo L66の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Eizo L66をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはEizo L66の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Eizo L66の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Eizo L66で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Eizo L66を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はEizo L66の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Eizo L66に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちEizo L66デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。