EizoメーカーL685EXの使用説明書/サービス説明書
ページ先へ移動 of 54
User’ s Manual Color LCD Monitor.
English 2 SAFETY SYMBOLS This manual uses the safety symbols below . They denote critical information. Please read them carefully . W ARNING Failure to abide by the information in a W ARNING may result in serious injury and can be life threatening.
English T ABLE OF CONTENTS 3 T ABLE OF CONTENTS PRECA UTIONS ................................................................................... 4 1. INTRODUCTION ..................................................................................... 9 1-1.
English 4 PRECA UTIONS PRECA UTIONS IMPOR T ANT! • This product has been adjusted specifically f or use in the region to which it was originally shipped. If operated outside the region to which it was originally shipped, the product ma y not perform as stated in the specifications.
English PRECA UTIONS 5 W ARNING Keep small objects or liquids a way fr om the unit. Small objects accidentally falling through the ventilation slots into the cabinet or spillage into the cabinet may result in fire, electric shock, or equipment damage.
English 6 PRECA UTIONS W ARNING The equipment must be connected to a gr ounded main outlet. Not doing so may cause in fire or electric shock. Use the correct v oltage . * Do not overload your power circuit, as this may result in fire or electric shock.
English PRECA UTIONS 7 CA UTION Handle with care when carrying the unit. Disconnect the power cord and cables when moving the unit. Moving the unit with the cord attached is dangerous.
English 8 PRECA UTIONS LCD P anel The screen may have defective pixels. These pixels may appear as slightly light or dark area on the screen. This is due to the characteristics of the panel itself, and not the product. The backlight of the LCD panel has a fixed life span.
English 1. INTRODUCTION 9 1. INTR ODUCTION Thank you very much for choosing an EIZO Color Monitor . 1-1. Features • Dual inputs compliant • DVI (p.
English 10 1. INTRODUCTION 1-3. Controls & Connector s Front ENTER AUT O SIGNAL 1 - 2 (4) (2) (5) (6) (3) (7) (8) (1) (1) ScreenManager Main Menu (2) Main P ower Switch (3) Input signal select.
English 1. INTRODUCTION 11 Rear (9) (11) (10) (12) (13) (14) (15) (9) Height Adjustable Stand (Detachab le) * 3 (10) P ower T er minal Cov ers for the Optional peripheral (11) Secur ity Lock Slot *4 (.
English 12 2. CABLE CONNECTION 2. CABLE CONNECTION 2-1. Before connecting Before connecting your monitor to the PC, change the display screen settings (resolution p.
English 2. CABLE CONNECTION 13 2-2. Connecting the signal cable NO TE • Be sure that the power s witches of both the PC and the monitor are OFF . 1. Plug the signal cable into the connector at the rear of the monitor and the other end of the cable into the video connector on the PC.
English 14 2. CABLE CONNECTION 3. Lead the power cord and signal cabl e into the cable holder at rear of the monitor . NO TE • The cables are recommended to lead with slight sag f or the smooth motion of the stand and the P or t rait/Landscape displa y .
English 2. CABLE CONNECTION 15 2-3. Connecting two PCs to the monitor T wo PCs can be connected to the monitor through the Signal 1 and the Signal 2 on the back of the monitor . Connecting Examples PC 1 PC 2 (Ex.1) Analog D-Sub mini 15 pin Signal Cable (FD-C16 enclosed) Signal Cable (FD-C04 enclosed) DV I Digital (Ex.
English 16 2. CABLE CONNECTION Selecting the active input The Input signal selection button on the front panel can be used to select either Signal 1 or Signal 2 as the active input at any time.
English 3. ScreenManager 17 3. ScreenMana g er 3-1. How to use the ScreenManager ScreenManager allows you to adjust screen performance though the main menu and select a fine contrast mode easily . ENTER AUTO SIGNAL 1 - 2 NO TE • Main Menu and Fine Contrast Men u can not be activ ated at the same time.
English 18 3. ScreenManager 3-2. ScreenManager Adjustments and Settings. The following table shows all the Screen Manager’ s adjustment and setting menus. “*” indicates adjustments of analog input only and “**” indicates digital input only .
English 3. ScreenManager 19 3-3. Fine Contrast This function allows you to select the best suited mode for screen display . T o select the Mode Directly pressing the left or right button allo ws you to select the best suited mode for screen display from 6 fine contrast modes; T ext, Picture, Movie, sRGB, Custom and External.
English 20 3. ScreenManager 3-4. Useful Functions Adjustment Loc k Use the “Adjustment Lock” function to prevent any accidental changes. Lock ed function • A uto adjustment button adjustments and settings in the ScreenManager . • A uto Adjustment Button Unlock ed function • Selecting of the Fine Contrast mode b y the control buttons.
English 3. ScreenManager 21 EIZO Logo appearing function When switching on the power button on the front panel, the EIZO logo is displyed for a while. If you desire to display or undisplay th is logo, use this function.
English 22 4. ADJUSTMENT 4. ADJUSTMENT 4-1. Screen Adjustment NO TE • Allow the LCD monitor to stabiliz e for at least 20 min utes before making image adjustments.
English 4. ADJUSTMENT 23 NO TE • If the user’ s operating system has no utility disk (e.g. OS/2), we recommend setting the desktop patter n to that as shown in the diag ram on the fo llowing. 3. Adjust by using <Screen> menu in the ScreenManager .
English 24 4. ADJUSTMENT (3) The screen position is not incorrect. → Use the <Position> adjustment. The correct displayed position of the monitor is decided because the number and the position of the pixels are fixed. The <Position> adjustment moves the image to the correct position.
English 4. ADJUSTMENT 25 4. Adjust the output signal range (Dynamic Range) of the signal. → Use the <Range Adjustment> (p.45) of <Screen> menu. This controls the level of output signal range to display the whole color gradation (256 colors).
English 26 4. ADJUSTMENT 4-2. Displaying a lo w resolutions The lower resolutions are enlarged to full sc reen automatically . Using the <Screen Size> function in the <Others> menu enables to change the screen size. 1. Enlarge the screen size when displaying a low resolution.
English 4. ADJUSTMENT 27 3. Set the brightness of the black area surrounding the displayed image. → Set the <Border Intensity>. In the <Enlarge> mode or <Full Screen> m ode, the outer area (border) is usually black. Select <Border Intensity> in the <Others> menu and adjust by using the right and left buttons.
English 28 4. ADJUSTMENT 4-3. Color Adjustment Color settings of each Fine Contrast mode can be adjusted and saved by using the <Color> menu of the ScreenManager . In the analog input, perform the “Range Adjustment” (p.25) before making the color adjustments.
English 4. ADJUSTMENT 29 Adjustment Contents Menu Function Descriptions Adjustable r ange Brightness T o set the brightness of the screen 0 ∼ 100% T o set the color temperature 4,000 ∼ 10,000 K in 500 K increments (including 9,300 K). Default setting is off (normal white) T emperature (p .
English 30 4. ADJUSTMENT 4-4. P ower -save Setup The <PowerManager> menu in the ScreenManager enables to set the power -save setup. NO TE • Do your part to conser ve energy , turn off the monitor when you are finished using it. Disconnecting the monitor from the power supply is recommended to sa ve energy completely .
English 4. ADJUSTMENT 31 T o set the power sa ve with ScreenSaver (EIZO MPMS) software. [Procedure] (1) Set the PC’ s appropriate ScreenSaver settings or blank the screen (totally black screen). (2) Select <EIZO DPMS> in the <PowerManager> menu.
English 32 5. MAKING USE OF USB (Universal Serial Bus) 5. MAKING USE OF USB (Univer sal Serial Bus) This monitor provides a hub which supports the USB standard. When connecting to a USB compliant PC or another hub, the monitor functions as a hub to which the USB compliant peripherals can be easily connected.
English 5. MAKING USE OF USB (Universal Serial Bus) 33 3. After setting up, the monitor’ s USB hub is available for connecting USB compliant peripherals to the downstream ports of the monitor .
English 34 6. A TT A CHING AN ARM ST AND 6. A TT A CHING AN ARM ST AND The LCD monitor can be used with an ar m stand by removing the tilt stand and attaching the arm stand to the LCD monitor . NO TE • Use an arm stand that satisfies the followings .
English 6. A TT A CHING AN ARM ST AND 35 4. Attach an arm stand to the LCD monitor securely . M4 Mounting Screws: M4 x 15 (mm) BZn/Fe Arm-stand.
English 36 7. TROUBLESHOO TING 7. TR OUBLESHOO TING If a problem persists even after applying the suggested remedies, contact an EIZO dealer . • No picture problems → See No.1 ~ No.2 • Imaging problems → See No.3 ~ No.14 • Other problems → See No.
English 7. TROUBLESHOO TING 37 Prob lems P oints to chec k with possible solutions 3. Display position is incorrect. ! Adjust the image position using the <Position> (p.24) If the problem persists, use the graphics board’ s utility software to change the display position if available.
English 38 7. TROUBLESHOO TING Prob lems P oints to chec k with possible solutions 11. Afterimages appear . ! When the screen image is changed after displaying the same image for a long period, an afterimage may appear . The “Afterimage” can be removed gradually by changing the displayed image.
English 7. TROUBLESHOO TING 39 Prob lems P oints to chec k with possible solutions 20. USB function cannot be setup. ! Check that the USB cable is correctly connected. ! Check that the PC and OS are USB compliant. (For verification of USB support, consult the manufacturer of each system.
English 40 8. CLEANING 8. CLEANING Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime. NO TE • Ne ver use thinner , benzene , alcohol (et hanol, methanol, or isopropyl alcohol), abrasiv e cleaners, or other strong solv ents, as these ma y cause damage to the cabinet or LCD panel.
English 9. SPECIFICA TIONS 41 9. SPECIFICA TIONS LCD P anel 46 cm (18.1 inch), TFT color LCD panel with Anti-Glare Hard Coating, Viewing Angle: Hor izontal: 170 ° , V er tical: 170 ° Image F or mation Time: approx.
English 42 9. SPECIFICA TIONS Default settings Analog input Digital input Contrast 100% 100% Brightness 100% 100% Smoothing 3 Fine Contrast Mode Custom P owerManager VESA DPMS D VI DMPM Screen Size Fu.
English 9. SPECIFICA TIONS 43 Pin Assignment DVI-I Connector Pin No. Signal Pin No. Signal Pin No. Signal 1 TMDS Data2- 11 TMDS Data1/3 Shield 21 NC 2 TMDS Data2+ 12 NC 22 TMDS Clock shield 3 TMDS Dat.
English 44 10. GLOSSAR Y 10. GLOSSAR Y Afterimage The Afterimage is particular to LCD monitors when the monitor screen is left on for a long period without use.
English 10. GLOSSAR Y 45 Phase The phase adjustment decides the sampling timing point for converting the analog input signal to a digital signal. Adjusting the phase after the clock adjustment will produce a clear screen. Range Adjustment The Range Adjustment controls the level of output signal range to display the whole color gradation.
APPENDIX/ANHANG/ANNEXE i APPENDIX/ANHANG/ANNEXE Preset Timing Char t for Analog input Timing-Über sichten für Analog Eingang Synchr onisation des Signaux pour A nalog numerique Based on the signal diagram shown below 25 fact ory presets have been registered in the monitor's microprocessor .
ii APPENDIX/ANHANG/ANNEXE Dot Clock MHz Sync Polarity Frequencies A: Front P orch B: Sync P eriod Mode H V H kHz V Hz H µs/Dot V ms/Line H µs/ Dot V ms/ Line VGA 640 × 480 25.175 Nega. Nega. 31.469 59.940 0.318/ 8 0.064/ 2 3.813/ 96 0.054/ 2 VGA 720 × 400 28.
APPENDIX/ANHANG/ANNEXE iii C: Back P orch D: Blanking Period E: Display P eriod F: T otal Cycle H µs/ Dot V ms/ Line H µs/ Dot V ms/ Line H µs/ Dot V ms/ Line H µs/ Dot V ms/ Line 1.589/ 40 0.794/ 25 5.720/ 144 0.922/ 29 25.442/ 640 15.253/ 480 31.
iv APPENDIX/ANHANG/ANNEXE Dot Clock MHz Sync Polarity Frequencies A: Front P orch B: Sync Period Mode H V H kHz V Hz H µs/Dot V ms/Line H µs/ Dot V ms/ Line W or kstation 1 152 × 900 94.2 Composite, Nega. 61.974 66.141 0.425/ 40 0.032/ 2 1.359/ 128 0.
APPENDIX/ANHANG/ANNEXE v C: Back P orch D: Blanking Period E: Display P eriod F: T otal Cycle H µs/ Dot V ms/ Line H µs/ Dot V ms/ Line H µs/ Dot V ms/ Line H µs/ Dot V ms/ Line 2.123/ 200 0.500/ 31 3.907/ 368 0.597/ 37 12.229/ 115 2 14.522/ 900 16.
[Applicable to gray (standard color version only).] Congratulations! Y ou have just purchased a TCO’99 approved and labelled product! Y our choice has provided you with a product developed for professional use.
Environmental Requirements Flame retardants Flame retardants are present in printed circui t boards, cables, wires, casings and housings. Their purpose is to prevent, or at least to delay the spread of fire. Up to 30% of the plastic in a computer casing can consist of flame retard ant substances.
For U.S.A, Canada, etc. (rated 100-120 V ac) Only FCC Declaration of Conformity W e, the Responsible Party EIZO NANAO TECHNOLOGIES INC. 5710 W arland Drive, Cypress, CA 90630 Phone: (562) 431-5011 declare that the product T rade name: EIZO Model: FlexScan L685 is in conformity with Part 15 of the FCC Rules.
Hinweis zur Ergonomie : Dieser Monitor erfüllt die Anforderungen an die Ergonomie nach EK1-ITB 2000 mit dem V ideosignal, 1280 Punkte × 1024 Zeilen, RGB an alog, 0,7 Vp-p und mindestens 75,0 Hz Bildwiederholfrequenz, non interlaced.
デバイスEizo L685EXの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Eizo L685EXをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはEizo L685EXの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Eizo L685EXの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Eizo L685EXで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Eizo L685EXを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はEizo L685EXの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Eizo L685EXに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちEizo L685EXデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。