3MメーカーMP8750の使用説明書/サービス説明書
ページ先へ移動 of 26
MP8750 Multimedia Projector Operator’s Guide Projecteur multimédia MP8750 Guide d’utilisation MP8750 Multimedia- Projektor Bedienerhandbuch Proyector de medios múltiples (multimedia) MP8750 Guí.
3M 1999 3M Multimedia Projector MP8750 i MP8750 Table of Contents SAFEGUARD S ...................................................................................................................................................... . II WARRANT Y .
ii 3M Multimedia Projector MP8750 3M 1999 WARNING Safeguards INTENDED USE Before operating the machine, please read the entire manual thoroughly. The 3M Multimedia Projector MP8750 was designed, built, and tested for use indoors, using 3M lamps, 3M ceiling mount hardware and nominal local voltages.
3M 1999 3M Multimedia Projector MP8750 iii PRODUCT SAFETY LABELS The following safety labels are used on or within the MP8750 projector to alert you to items or areas requiring your attention:.
iv 3M Multimedia Projector MP8750 3M 1999 Warranty LIMITED WARRANTY 3M warrants this product against any defects in material and workmanship, under normal use and storage, for a period of two years from date of purchase. Proof of purchase date will be required with any warranty claim.
3M 1999 3M Multimedia Projector MP8750 1 Section 1: Unpack 1-1. Contents of Shipping Box The MP8750 is shipped with the necessary cables required for standard VCR, PC or laptop computer connections. Carefully unpack and verify that you have all of the items shown below in Figure 1 –1.
2 3M Multimedia Projector MP8750 3M 1999 Section 2: Production Description 2-1. Machine Characteristics The MP8750 integrates metal halide lamp and Digital Light Processor (DLP) technology. It accepts input from computer and/or video sources and projects a super bright image.
3M 1999 3M Multimedia Projector MP8750 3 Section 3: Set Up/Connections 3-1. Terminal Connection Panel The MP8750 projector has terminal connections on the backside of the projector. Refer to Section 3.4-Cable Connections for more detail. 1. AUX: Only compatible with 3M devices.
4 3M Multimedia Projector MP8750 3M 1999 3-3. Mouse Connection The MP8750 has mouse emulation capability. Connect your computer mouse to the MP8750 and control computer mouse functions using the remote control. 1. Power down the computer and projector.
3M 1999 3M Multimedia Projector MP8750 5 Cable Connection, continued Figure 3-4. Cable Connections Audio cable optional MAC cable optional.
6 3M Multimedia Projector MP8750 3M 1999 3-5. Image Size (Projector-to-Screen Distance) Adjust the size of the projected image using the zoom control buttons. The projected image size values, as they relate to the distance-to-screen value, are shown for focal lengths of f=25mm and f=45mm.
3M 1999 3M Multimedia Projector MP8750 7 Section 4: Operating Instructions 4-1. Power Up Projector Read the Important Safeguards before operating the MP8750 projector. After all cable connections have been completed, the projector can be powered up.
8 3M Multimedia Projector MP8750 3M 1999 4-2. Standby Mode When the projector is not being used, place it into standby mode. 1. Press the Standby button. 2. The lamp will switch off and the red LED will illuminate. ü ü Note The fan motor will continue to run for a few minutes until the projector cools down and then the fan will turn off.
3M 1999 3M Multimedia Projector MP8750 9 Sub-Menu: Select the desired sub-menu (see Main Menu). Press the Disc Pad to the right or the Enter button to display the sub-menu. The sub-menu name (1) is on the top line. A slider bar (2) at the right of a sub-menu line indicates you can increase or decrease the value.
10 3M Multimedia Projector MP8750 3M 1999 4-5. Menu Adjustments/Settings, continued Picture (Video) Submenu Items Description / Action Default Setting Height Adjust projected image height Brig.
3M 1999 3M Multimedia Projector MP8750 11 4-5. Menu Adjustments/Settings, continued Advanced Setup (PC/RGB) Submenu Items Description / Action Default Setting Projection (drop down window) Sel.
12 3M Multimedia Projector MP8750 3M 1999 Section 5: Remote Control 5-1. Remote Control Functions Aim the remote control toward the projection screen or at the sensor. Press desired remote button to send a signal to the projector. *Standby: Switch the projector between Standby mode (lamp off, fan off) and operation mode (lamp on, fan on).
3M 1999 3M Multimedia Projector MP8750 13 5-2. Battery Replacement The remote control uses two AAA batteries. The battery cover is located on the back of the remote control. 1. Press the locking tab (1) to release door. Figure 5-1) 2. Lift up on the door (2) to remove it and set it to the side.
14 3M Multimedia Projector MP8750 3M 1999 Section 6: Maintenance 6-1. Replacing The Air Filter For best performance, replace the air filter each time the projection lamp is changed. ü ü Note Periodically check air filter for excess dust or dirt.
3M 1999 3M Multimedia Projector MP8750 15 6-2. Replacing Projection Lamp The metal halide lamp of the projector has a limited lifetime of approximately 2000 hours. If the projected image appears dark or a red lamp life indicator bar displays during projector startup, you should change the lamp and air filter.
16 3M Multimedia Projector MP8750 3M 1999 6-3. Lamp Life Indicator The elapsed operating time of the lamp is displayed on the Info sub-menu. From the Main menu, select INFO to display the lamp life. As long as the lamp indicator bar is green, the lamp is good.
3M 1999 3M Multimedia Projector MP8750 17 Section 7: Troubleshooting 7-1. Troubleshooting Problems and Solutions Problem Probable Cause Possible Solution Image is disturbed or unstable. • Wrong Sync setting. • Wrong Tracking value. • Set to factory default setting .
18 3M Multimedia Projector MP8750 3M 1999 Section 8: Product Specifications 8-1. Technical Specifications Display Technology Single DMD Resolution 1,024 x 768 (total 2,359,296 pixels) 625 (PAL.
3M 1999 3M Multimedia Projector MP8750 19 8-2. Accessory & Spare Parts List Part Description Part Number Projection Lamp Kit - Metal Halide Lamp (350W) - Air Filter 78-6969-8586-6 Air Filter (included in lamp kit 78-6969-8577-5 ) 78-8118-3476-7 Power Cords (U.
20 3M Multimedia Projector MP8750 3M 1999 (Intentionally Blank).
Let us help you make the most of your next presentation. We offer every thing from presentation supplies to tips for better meetings. And we're the only transparency manufacturer that offers a recycling program for your used transparencies. For late-breaking news, handy references and free product samples, visit our Internet Website.
デバイス3M MP8750の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
3M MP8750をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこには3M MP8750の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。3M MP8750の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。3M MP8750で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
3M MP8750を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又は3M MP8750の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、3M MP8750に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわち3M MP8750デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。