Electroluxメーカー56800の使用説明書/サービス説明書
ページ先へ移動 of 36
LAVA THERM 56800 Condenser dryer User information.
2 Dear Customer , Please read this user information car e fully and keep it to r efer to later . Please pass the user information on to any futur e owner of the appli- ance. The following symbols are used in the text: 1 Safety instructions War n in g! Informa tion that affects your personal safety .
3 Contents Oper ating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Disposal . . . . .
4 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Consumption values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Installation and conn ection instructions .
5 Oper ating Instructions 1 Safety Prior to initial start up • Note the ”Installation and connection instructions” • Before first starting up, check the machine f or any damage incurr ed during transport. Never connect a damaged machine. If parts ar e damaged, contact your supplier .
6 Child safety • Keep packaging away fr om ch ildren. Risk of suffocation! • Childre n can often not see the danger s associated with electrical ap- pliances. Never leave unsuperv ised children near the dryer . • Ensure tha t children and small anim als cannot climb into the dryer’ s drum.
7 2 Old appliance The symbol W on the product or on its packaging indicates that this product may not be tr eated as hous ehold waste. Instead it shall be handed over to the applicable collec tion point for the r ecycling of elec- trical and electronic equi pment.
8 Description of machine Oper ating scr een Wat er res erv oi r Screw ed feet (with height adjustment) Loading door (re versible) Display panel Large mesh filter (lint filter) Air slot s Lamp for inte.
9 Befor e the first drying cycle In order to r emove any residue which may have been pr oduced during production, wipe the dryer drum wi th a damp cloth or undertake a brief drying cycle (20 MIN) with damp cloths. Sorting and pr eparing laundry Sorting laundry • Sort by fabric type: – Cotton/linen for progr ammes in CO TTONS pr ogramme gr oup.
10 Overview of pr ogr ammes Programme max. loading volume (weight when dry) Additional functions Application/properties Car e symbols AUDIBLE SIGNAL SPECIAL CARE 1) 1) SPECIAL CARE and SENSITIVE cannot both be selected at the same time. SENSITIVE 1) COTT ONS EXTRA DRY 6k g • • • Drying thick or multi-layer ed tex- tiles, e.
11 Programme max. loading volume (weight when dry) Additional functions Application/properties Car e symbols AUDIBLE SIGNAL SPECIAL CARE 1) 1) SPECIAL CARE and SENSITIVE cannot both be selected at the same time. SENSITIVE 1) 20 MIN 40 MIN 1k g • • - For drying individual items of laundry or for small volumes of less than 1 kg.
12 Drying Switching machine on / switching light on Turn the progr amme selector to any progr amme or turn it to LIGHT . The machine has been switched on. When the door is opened, the drum is illuminated. Opening loading door / loading laundry 1. Open loading door: Push against the loading door (push point ) 2.
13 AUDIBLE SIGNAL When the drying cycle has finished, an intermittent audible signal will sound. SPECIAL CARE For especially gentle drying of sensitive fabrics with the l care label and for temperatur e-sensitive textiles (e.g. acrylic, viscose). Progr amme is executed with reduced heat.
14 Changing pr ogramme To change a progr amme which has been selected by mistake once the progr amme has started, first turn the pr ogramme selector to OFF and then reset the pr ogr amme. 3 The progr amme can no longer be changed directly once the progr amme has started.
15 Cleaning and maintenance Cleaning lint filter To ensur e that the dry er works effici ently , the lint filters (micr o-fine fil- ter and fine strainer) must be cleaned after every drying cycle. 1 Caution! Never operate the dryer without fluff filter s or with damaged or blocked fluff filters.
16 Clean the entir e filter area 3 The strainer ar ea does not have to be cleaned after every drying cycle, but should be checked regularly and cleaned of fluff if necessary . 6. To do this, grip the top of the large mesh filter and pull it forwards un- til it comes loose from the two brackets.
17 Emptying the water r eservoir Empty water reservoir after every drying cycle. If the water reservoir is full, an active pr ogramme will be interrupted automatically and the EMPTY WA TER di splay will light up. In order to continue the progr amme, the wa ter reservoir must be emptied.
18 Cleaning heat exchanger If the HEAT EXCHANGER display is illuminated, the heat exchanger needs to be cleaned. 1 Caution! Operating when the heat exchanger is clogged with lint can damage the dryer . This also increases energy consumption. 1. Open loading door 2.
19 Cleaning the drum 1 Caution! Do not use abrasives or steel wool to clean the drum. 3 Lime in the water or cleaning agents may form a bar ely visible lining on the inside of the drum. The degree to which the laundry has been dried is then no longer detected r eliably .
20 Drying r esults unsatis- factory . Wr ong programme selected. Select a different progr amme the next time you dry (see “Overv iew of pro- grammes” section). Lint filter clogged. Clean lint filter . Heat exchanger clogged with lint. Clean heat exchang er .
21 Changing bulb for interior light Only use a special bulb which is designed specially for dryers. The spe- cial bulb is available from the local Service For ce Centre.
22 Pr ogr amming options Objective Implementation P ermanently pr o- gramme in the audible signal which r eminds you that the pr o- gramme is complete. 1. Turn the progr amme selector to any progr amme. 2. Pres s the AUDIBLE SIGNAL button and hold down for ap- prox.
23 T echnical data 5 This appliance conforms with the following EU Directives: – 73/23/EEC dated 19.02.1973 Low V oltage Directive – 89/336/EEC dated 03.05.1989 EMC Di r ective inclusive of Amending Directive 92/3 1/EEC – 93/68/EEC dated 22.0 7.
24 Installation and connection instructions 1 Installation safety instructions • Before first starting up, all parts of the transport safety devices must be removed.
25 Electrical connection Any electrical work requir ed to inst all this appliance should be carried out by a qualified electrician or competent person. 1 WARNING – THIS APPL IANCE MUST BE EARTHED. The manufacturer declines any liabili ty should these safety measur es not be observed.
26 P ermanen t Connection In the case of a permanent connection it is necessary that you install a double pole switch between the appliance and the electricity supply (mains), with a minimum gap of 3 m m between the switch contacts and of a type suitable for the requir ed load in compliance with the curr ent electrical regulations.
27 1. Open door . 2. Unscrew hinge A fr om the front of the machine and take off the door . 3. Carefully pry off cover plates B and C. To do this, insert a thin scr ew- driver into the slots as shown in the illustration, pr ess downwards slightly and pry out the cover plates.
28 Special accessories The following special accessories are available from your Service Force Centre or your specialist dealer: Intermediate installation ki ts for stacked washer and dryer: These int.
29 W ARR ANTY CONDITIONS Gr eat Britain Standar d guar antee conditions We, AEG, undertake that if withi n 12 months of the date of the purchase this AEG appliance or any part ther eof is proved to be.
30 Weiter e Kundendiensts tellen im Ausland In diesen Ländern gelten die Gar antiebedi ngungen der örtlichen P artner . Diese können dort eing esehen wer den. Further after-sa les service agencies overseas In these countries our AEG-E lectr olux agents’ own guarantee conditio ns ar e applicable.
31 Australia The Andi-Co Gr oup 1 Stamford Road Oakleigh VIC 3 166 Tel.: ( 03) 9569 1255 Fax: (03) 9569 1450 www .andico.com.au Kore a (S ou th) Core Incorp. 3/F Chewoo Bld g. 200 Nonhyun-Dong Kang nam-Ku 135-0 1 0 Seoul Telefon 82 2 549 89 6 1 Namibia AEG NAMIBIA (PTY) LIMITED-Jeppe Street Northern Industrial Area Windhoek Tel.
32 Hong Kong Dah Chong Hong Lt d. 20 Kai Cheung Road Kow loon Bay Kow loon - Hong Kong Tel.: 0 08522262 1620 Fax: 008 5227550333 Lithuania Electrolux Lithuania Ver kui 2 9 2600 Vilnus Tel.: 37 2 272 3326 Fax: 37 2 272 3366 Russia Electrolux Russia Ltd.
33.
34.
35 Service and Spar e P arts If the event of your appliance r equir ing service, or if you wish to pur- chase spare parts, please contact Service For ce by telephoning: Y our telephone call will be automatically routed to the Service For ce Centre covering your post code area.
From the El ectrolux Gr oup . The world´s No.1 choice. The Electrolux Gr oup is the world´s largest pr oducer of powere d appliances for ki tchen, cleaning and outdoor use.
デバイスElectrolux 56800の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Electrolux 56800をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはElectrolux 56800の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Electrolux 56800の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Electrolux 56800で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Electrolux 56800を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はElectrolux 56800の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Electrolux 56800に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちElectrolux 56800デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
