Electroluxメーカー726683の使用説明書/サービス説明書
ページ先へ移動 of 28
TAVOLI REFRIGERATI E FREEZER CON CONTROLLO ELETTRONICO REFRIGERATED AND FREEZER COUNTERS WITH ELECTRONIC CONTROL TABLES RÉFRIGÉRÉES ET FREEZERS À CONTRÔLE ÉLECTRONIQUE MESAS REFRIGERADAS Y CONGELADOR CON CONTROL ELECTRÓNICO PART NO. 595R 001 01 VERSION 2 2006.
2 INSTALLATION DIAGRAM SCHEMA D’INSTALLAZIONE TAVOLO REFRIGERATO 2 VANI CON ALZATINA 2-COMPARTMENT REFRIGERATED COUNTER WITH SHOULDER TABLE RÉFRIGÉRÉE 2 COMPARTIMENTS AVEC BORD REHAUSSÉ MESA REF.
3 USA IT FR ES A = MODULAR COMPARTMENT DESIGNED FOR SOLID DOORS (WIRE SHELVES IN CELL) OR DRAWER UNIT B = MODULAR COMPARTMENT DESIGNED FOR REFRIG ERATING UNIT OR FREEZER C = OUTLET FOR DRAINING OF LIQUIDS FROM CELL, DIAMETER 0,69"/17,5 mm.
4 C I AA B A A C I INSTALLATION DIAGRAM SCHEMA D’INSTALLAZIONE TAVOLO REFRIGERATO 3 VANI CON ALZATINA 3-COMPARTMENT REFRIGERATED COUNTER WITH SHOULDER TABLE RÉFRIGÉRÉE 3 COMPARTIMENTS AVEC BORD R.
5 USA IT FR ES A = MODULAR COMPARTMENT DESIGNED FOR SOLID DOORS (WIRE SHELVES IN CELL) OR DRAWER UNIT B = MODULAR COMPARTMENT DESIGNED FOR REFRIG ERATING UNIT OR FREEZER C = OUTLET FOR DRAINING OF LIQUIDS FROM CELL, DIAMETER 0,69"/17,5 mm.
6 INSTALLATION DIAGRAM SCHEMA D’INSTALLAZIONE TAVOLO REFRIGERATO 4 VANI CON ALZATINA 4 COMPARTMENT REFRIGERATED COUNTER WITH SHOULDER SCHÉMA D’INSTALLATION DIAGRAMA DE INSTALACIÓN SIDE VIEW VIST.
7 USA IT FR ES A = MODULAR COMPARTMENT DESIGNED FOR SOLID DOORS (WIRE SHELVES IN CELL) OR DRAWER UNIT B = MODULAR COMPARTMENT DESIGNED FOR REFRIG ERATING UNIT OR FREEZER C = OUTLET FOR DRAINING OF LIQUIDS FROM CELL, DIAMETER 0,69"/17,5 mm.
8 Fig.1 PANNEAU DE COMMANDE VERSION "RÉFRIGÉRATEUR” PANEL DE CONTROL VERSIÓN "FRIGORÍFICO” 1- Access to button for food categories 2 - High humidity ON/OFF button 2a - High humidity .
9 Fig.2 “FREEZER” VERSION CONTROL PANEL PANNELLO DI CONTROLLO VERSIONE "CONGELATORE” PANNEAU DE COMMANDE VERSION "CONGÉLATEUR” PANEL DE CONTROL VERSIÓN "CONGELADOR” 1- Acces.
10 CATEGORIES: TEMPERATURE AND HUMIDITY SET- TING CATEGORIE: TEMPERATURA E IMPOSTAZIONE DELL'UMIDITA' Fig.3 REFRIGERATOR VERSIONE A TEMPERATURA NEGATIVA CATÉGORIES: TEMPÉRATURE ET PROGRAMM.
11 Fig.5 INCORRECT DISTRIBUTION OF FOOD CARICO NON CORRETTO DEGLI ALIMENTI CHARGEMENT DES ALIMENTS INCORRECT CARGA INCORRECTA DE LOS ALIMENTOS CORRECT DISTRIBUTION OF FOOD CARICO CORRETTO DEGLI ALIMEN.
12 Fig.10 FUNCTIONAL SPACES SPAZI FUNZIONALI ESPACES FONCTIONNELS ESPACIOS FUNCIONALES 74.01" 74.01" 1880 mm 1880 mm 26.38" 26.38" 670 mm 670 mm.
13 Fig.11 0 6 :4 1 * * * D e f r o st EN D 2 3 :4 1 5 2 3 :3 1 5 2 3 :2 1 5 2 3 :1 1 5 2 3 :0 1 * * * D e f r o st ST A R T 2 2 :5 1 5 E nd: 11/ 03/ 2001 22: 35 S t art: 11/ 03/ 2001 22: 32 **** P OW .
14 PRECAUTIONS ......................................................................... Page 16 A . 1 GENERAL INFORMA TION ........................................................ Page 17 A.1.1 Foreword ...............................................
15 C.1.5 Loading the product .................................................................................................... P a g e2 3 C.1.6 Defrosting .............................................................................................
16 PRECAUTIONS T o reduce the risk of fire, electric shock or injury during use of the appliance, follow these basic precautions, with particular attention to the following: • Read all instructions before using the appliance. • This Manual does not cover every possible condition and situation that may occur .
17 A 1.8 IMMEDIATE INSPECTION FOR DAMAGE DUE TO TRANSPORT Check the packing for any damage before and during unloading. The carrier is responsible for the safety of the container during transport and delivery. If the equipment received has visible or hidden damage, a claim can be made with the carrier.
18 3-COMPARTMENT REFRIGERATED COUNTER WITH SHOULDER External dimensions: - Width 69.25" 1759 mm - Depth with door closed 27.56" 700 mm - Depth with door open 43.70" 1 1 10 mm - Depth with drawers open 49.99" 1270 mm - Height 37.40" 950 mm Compartment dimensions: - Width 14.
19 WEAR PROTECTIVE GLOVES WHEN UNPACKING AND INSTALLING THE APPLIANCE. Read these instructions carefully before carrying out installation. Installation and start- up must be carried out by a qualified installer .
20 B.1.4 WATER CONNECTION The appliance is equipped with a drain hole for draining any liquids collected in the compartment. Connect the hole “C” , located on the bottom of the appliance and closed with a plug, to a special drain. The diameter of the drain hole is “0.
21 C.1.2 FIRST ST ART -UP AND TEMPERA TURE ADJUSTMENT The appliance has a main ON/OFF switch. Switch the appliance on by pressing the ON/OFF button: T o set the compartment temperature, proceed as follows: - hold the bottom SET button down for 5 seconds SET The SET TEMPERATURE value will be displayed The unit of measure light start s flashing.
22 - T o store the new set value, wait until it stops flashing and exit the program SET If no selection is made within 15 seconds, the last value displayed will be automatically confirmed and the display of compartment temperature will be updated.
23 T o select a category , press the top MANUAL DEFROST button or bottom SET button or SET after pressing the button, if no selection is made within 5 seconds the last category displayed is automatically confirmed and stored.
24 buzzer: buzzer activated WHA T IS RECORDED? Press HACCP the buzzer goes off; press again for 5 seconds until the alarm (AL1) is displayed. Press again HACCP the temperature, start date and time are given in a message: “TEMP 78.8F/26C Start 17.05 10-10-99 End——” .
25 C.1.7.4 LIST OF SERVICE ALARMS · T ype “ b ” service alarms b1 b2 b3 b4 No pow er s upply P lug not c orrec t l y ins ert ed Doo r open Mi c ros wit c h br ok en Res et t h e HA CCP m e m o ry.
26 C.2.1 Basic system connection (accessory code F880048) The printer can provide a printout of data obtained by the sensor connected to the electronic board.
27 C.3.3 SHELF MODULARITY To replace the shelf, remove the fixing screws located under the shelf, shift the shelf towards the front of the counter to release it from the rear seats, then lift it out. Routine maintenance tasks can be performed by non- specialized personnel.
28 If the fault persists after carrying out the above checks, contact T echnical Service, remembering to specify the following: • nature of the fault; • appliance PNC (production code); • Ser . No. (appliance serial number). Note: The code and serial number are essential for identifying the type of appliance and date of manufacture.
デバイスElectrolux 726683の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Electrolux 726683をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはElectrolux 726683の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Electrolux 726683の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Electrolux 726683で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Electrolux 726683を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はElectrolux 726683の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Electrolux 726683に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちElectrolux 726683デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。