AlamoメーカーGR72の使用説明書/サービス説明書
ページ先へ移動 of 146
©2007 Alamo Group Inc. GR60 GR72 Published 02/07 Part No.00 775743C OPERA T OR’S MANUAL RHINO ® 1020 S. Sangamon A ve. Gibson City , IL 60936 800-446-5158 Email: parts@servis-rhino.
T o the Owner/Operator/Dealer All implements with moving p arts are potentially hazardou s. There is no substitute for a cautious, safe-minded operator who re co gnizes the potential hazards and follows reasonable safety practices.
In order to reduce accidents and enha nce the safe operation of mowers, Alamo Gr oup Ag Division, in cooperation with other industry ma nufacturers has developed the AE M/FEMA Industrial and Agricul- tural Mower Safety Practices video and guide book.
Alamo Gr oup Ag. Division is willing to pr ovide one (1) AEM Mower Safety Practices V ideo Please Send Me: VHS Format – AEM/FEMA Mower Operator Safety V ideo DVD Format – AEM/FEMA Mower Operator S.
©2007 Alamo Group Inc. T ABLE OF CONTENTS SAFETY SECTION ......... ................................. .......................................................... ........... 1- 1 Safety Messages ................ ............. ................ .........
©2007 Alamo Group Inc. DRIVING THE TRACTO R AND IMPLEMENT ................. ............. ................. ................ ............. ................ .. .... 4-23 Starting the Tractor .... ................ ............. ................ .......
Safety Section 1-1 © 2007 Alamo Group In c. SAFETY SECTION.
SAFETY GR60/72 02/07 Safety Section 1-2 © 2007 Alamo Group In c. SAFETY Safety Messages A safe and careful operator is the best oper ator . Sa fety is of primary impor tance to the manufactur er and should be to the owner/operator .
SAFETY GR60/72 0 2/07 Sa fety Section 1-3 © 2007 Alamo Group In c. SAFETY N ever ope ra t e th e T rac t or or I mp l emen t un til you h ave rea d an d completely und erstand this Manua l, the T ractor Operator’s Manual, an d each of the Safety Messages found in the Manual or on the T ractor and Implement.
SAFETY GR60/72 02/07 Safety Section 1-4 © 2007 Alamo Group In c. SAFETY Never allow children to operate, ri de on, or come close to the T ractor or Implement.
SAFETY GR60/72 0 2/07 Sa fety Section 1-5 © 2007 Alamo Group In c. SAFETY Periodically inspect all moving part s for wear and replace when necessary with au thorized service part s. Look for loose fastener s, worn or broken p arts, and leaky or loose fittings.
SAFETY GR60/72 02/07 Safety Section 1-6 © 2007 Alamo Group In c. SAFETY Al ways rea d care f u ll y an d comp l y f u ll y w ith th e manu f ac t urer ’ s instructions when handling oil, solvents, cleansers, and a ny other chemical agen t. (SG-22) Never run the T racto r engine in a closed building or without adequate ventilation.
SAFETY GR60/72 0 2/07 Sa fety Section 1-7 © 2007 Alamo Group In c. SAFETY There are obvio us and hidden potential hazar ds in the operation of this Mower . REMEMBER! This machine is often operated in heavy brush and in heavy weeds. The Blades of this Mower can throw ob jects if shields are not properly installe d and maintained.
SAFETY GR60/72 02/07 Safety Section 1-8 © 2007 Alamo Group In c. SAFETY Avoid m owing in reverse direction when po ssible. Check to make sure there are no persons behind the mower and use extreme car e when mowing in reverse. Mow only a t a slow ground speed where you can safe ly ope rate and control the tractor and mower .
SAFETY GR60/72 0 2/07 Sa fety Section 1-9 © 2007 Alamo Group In c. SAFETY Rotary Mowers are capable under adverse conditions of throwing objects for great distance s (300 feet or more) and causing serious injury or death. Follow safety messages carefu lly .
SAFETY GR60/72 02/07 Safety Sectio n 1- 10 © 2007 Alamo Group In c. SAFETY Relieve hydraulic pressu re prior to doing any maintenance or rep air work on the Implement. Place the Implemen t on the ground or securely blocked up, disengag e the PT O, and turn of f the tractor engine.
SAFETY GR60/72 02/07 Safety Section 1-11 © 2007 Alamo Group In c. SAFETY PA R T S I N F O R M AT I O N Rhino mowers use bala nced an d matche d system co mpo nent s for blade car riers, blad es, cu ttershaf ts, knives, knife hangers, roll ers, drivetrain component s, and be arings.
SAFETY GR60/72 02/07 Safety Sectio n 1- 12 © 2007 Alamo Group In c. SAFETY Decal Location NOTE: Rhino supplies safety decals on this product to promote sa fe operation.
SAFETY GR60/72 02/07 Safety Section 1-13 © 2007 Alamo Group In c. SAFETY ITEM P ART NO. QTY TYPE DESCRIPTION 1. 00725746 1 PELIGRO Get Manual T ranslated 2. 00773723 1 PELIGRO Rotating Dr iveline T ranslation 3. 007491 17 1 DANGER Multi-Hazard 4. 00756004 1 DANGER D/L Shield missing 5.
SAFETY GR60/72 02/07 Safety Sectio n 1- 14 © 2007 Alamo Group In c. SAFETY Decal Description Peligro T ranslation, If you do no t know how to read English, please find someone who knows how to read English.
SAFETY GR60/72 02/07 Safety Section 1-15 © 2007 Alamo Group In c. SAFETY DANGER! Rotating Driveline Keep Away , Contact can cause death. P/N 00756005 DANGER! Make certain that drivelin es are correct length and are se curely attached. P/N 00756494 DANGER! Keep Away Thrown Object s.
SAFETY GR60/72 02/07 Safety Sectio n 1- 16 © 2007 Alamo Group In c. SAFETY For safety and to guarantee optimu m product reliability alwa ys use genuine RHINO replaceme nt parts. P/N 00760657 Attention! Do not operate u n til all slip clutches are properly adjust an d ar e not frozen.
SAFETY GR60/72 02/07 Safety Section 1-17 © 2007 Alamo Group In c. SAFETY Logo Product Name: Rhino P/N D302 P/N D303 Logo Produc t Name: R hino GR72 Logo P/N D316 GR60 Logo P/N D318.
SAFETY GR60/72 02/07 Safety Sectio n 1- 18 © 2007 Alamo Group In c. SAFETY INFORMA TION - 5 Y ear Gearbox W arranty P/N 00771283 P/N 2738332 Red Reflectors INFORMA TION - Operator ’s Manual Inside .
SAFETY GR60/72 02/07 Safety Section 1-19 © 2007 Alamo Group In c. SAFETY Federal Laws and Regulations This section is intend ed to explain in broa d terms the conc ept and effect of federal laws an d regulations concerning emplo yer and employee equ ipment operat ors.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Introduction Section 2-1 © 2007 Alamo Group Inc. INTRODUCTION SECTION.
INTRODUCTION GR60/72 0 2/07 Introductio n Section 2- 2 © 2007 Alamo Group Inc. INTRODUCTION This Rotary Cutter is designed with ca re and built with quality materials by skilled worker s.
INTRODUCTION GR60/72 0 2/07 Introductio n Section 2- 3 © 2007 Alamo Group Inc. INTRODUCTION These rugged Cutters are desig ned for heavy-duty work. They can mow pastur es, cut brush up to 3" (GR60) and 4" (GR72) in diameter , and control grass and weeds on highways or industrial sites.
INTRODUCTION GR60/72 0 2/07 Introductio n Section 2- 4 © 2007 Alamo Group Inc. INTRODUCTION Attention Owner/Operator BEFORE OPERA TING THIS MACHINE: 1. Carefully read the Operator’s Manual, completely understand the Safe ty Messages and instructions, and know how to operate correctly both the tractor and implement.
Assembly Section 3-1 © 2007 Alamo Group In c. ASSEMBL Y SECTION.
ASSEMBLY GR60/72 0 2/07 Assembly Sectio n 3-2 © 2007 Alamo Group In c. ASSEMBL Y A-Frame Assembly (Figure Asm-00049) T o assemble the Mower ’s A-Fr ame, follow the procedures listed below: 1.
ASSEMBLY GR60/72 0 2/07 Assembly Sectio n 3-3 © 2007 Alamo Group In c. ASSEMBL Y T ailwheel Assembly (Asm-0050) T o assemble the Mower ’s T ailWheel, follow the procedure s listed below . NOTE : Certain step s may have been performed by the man ufacturer before delivery .
ASSEMBLY GR60/72 0 2/07 Assembly Sectio n 3-4 © 2007 Alamo Group In c. ASSEMBL Y Check Chains (Extra Equipment) for Lif t-Models (Figure Asm-001 1) Check Chains are available for att achment to front of Mower as an a ccessory .
ASSEMBLY GR60/72 0 2/07 Assembly Sectio n 3-5 © 2007 Alamo Group In c. ASSEMBL Y S tabilizer Bars or Sway Chains must be inst a lled and adjusted tightly . Without these bars or chains, serious damage to the Driveline can occur , and broken part s could cause bodily injury to the operator or byst anders.
ASSEMBLY GR60/72 0 2/07 Assembly Sectio n 3-6 © 2007 Alamo Group In c. ASSEMBL Y Deflector Corner Plate ( Figure Asm-0004) 1. Attach th e corner plate (1) to the side of the deck with a 1/2" x 1-1/4" Bo lt (2), and Lo cknut (2). Rear Deflectors (S t andard Equipment) Rear Deflector (Figure Asm-0005 ) 1.
ASSEMBLY GR60/72 0 2/07 Assembly Sectio n 3-7 © 2007 Alamo Group In c. ASSEMBL Y Front Chainguards (Optional Equipment) Chainguards Front and Rear Chain Guar ds (Optional Equipment) are recomme nded for higher than normal u sage (10 0 hours or more per year) and will provid e protection from thrown objects with careful operation.
ASSEMBLY GR60/72 0 2/07 Assembly Sectio n 3-8 © 2007 Alamo Group In c. ASSEMBL Y Driveline Att achment - GR60 (Figure Asm-0051) Before starting a ssembly , make certain that all paint, dirt, and grease are removed from gearbox shaft (1). T o ea se assembly apply a light co at of grease to splines and assemble.
Operation Sectio n 4- 1 © 2007 Alamo Group In c. OPERA TION SECTION.
OPERATION GR60/72 02/07 Operation Sec tio n 4- 2 © 2007 Alamo Group Inc. OPERA TION RHINO GR60/72 HEA VY - DUTY ROT AR Y MOWER OPERA TION INSTRUCTIONS Rhino Gyro 60 and 72 (GR60/72) heavy -duty rotary mowers ar e manufactured with qualit y material by skilled workers.
OPERATION GR60/72 02/07 Operation Sec tio n 4- 3 © 2007 Alamo Group In c. OPERA TION 1. S t andard Equipment and Specifications GR60 GR72 Horsepower Required (Min.
OPERATION GR60/72 02/07 Operation Sec tio n 4- 4 © 2007 Alamo Group Inc. OPERA TION 2. OPERA TOR REQUIREMENTS Safe operation of the unit is the responsibility of a qualifi ed operator .
OPERATION GR60/72 02/07 Operation Sec tio n 4- 5 © 2007 Alamo Group In c. OPERA TION 3. TRACT OR REQUIREMENTS The tractor used to operate the mower must have the power capacity to lif t, pull, and operate the Power T ake Off (P TO) at the mowe r ’s rated speed while traveling at a ground speed betwee n 2 and 5 MPH.
OPERATION GR60/72 02/07 Operation Sec tio n 4- 6 © 2007 Alamo Group Inc. OPERA TION 3.3 T r actor Horsepower The power re quired to ope rate a mower is dete rmined by th e tractor PTO horsepower . For most mow ing conditions, the GR60/72 mower re quires at tractor with at least 30 and 40 HP , respectively .
OPERATION GR60/72 02/07 Operation Sec tio n 4- 7 © 2007 Alamo Group In c. OPERA TION 3.6 Power T ake Off (PTO) Depending on th e unit, the mower is designed to ope rate at a P TO spee d of 540 or 1000 RPM. Most tracto rs operate at either 540, or a combina tion of 540 and 1000 RPM PT O speeds.
OPERATION GR60/72 02/07 Operation Sec tio n 4- 8 © 2007 Alamo Group Inc. OPERA TION 4.1 Boarding the T ractor Use both hands and equ ipped handrails and steps for supp ort when boarding th e tractor . Never use co ntrol levers for suppor t when mounting the tractor .
OPERATION GR60/72 02/07 Operation Sec tio n 4- 9 © 2007 Alamo Group In c. OPERA TION 5. ST ARTING THE TRACTOR The operat or must have a complete un derstanding of th e placemen t, function , and operatio nal use of all tractor cont rols before starting the tracto r .
OPERATION GR60/72 02/07 Operation Section 4- 10 © 2007 Alamo Group Inc. OPERA TION 1. Make sure the tractor is equipped with the correct PT O shaft. Chan ge shaft s if needed. 2. Shorten or remove th e tractor drawbar to avoid interference wh en raising and lowering the mower .
OPERATION GR60/72 02/07 Operation Section 4- 11 © 2007 Alamo Group In c. OPERA TION 7.1 Setting Mower Height 1. Park the tractor and mowe r on level ground. 2. Using the 3-point hitch control lever , positio n the front of the mower with th e side skids 1” less off the ground than desired cut height.
OPERATION GR60/72 02/07 Operation Section 4- 12 © 2007 Alamo Group Inc. OPERA TION 7 . 2 S e tti ng D ec k Pit c h T o facilitate safe and effi cient operation, the mower should be oper ated with th e deck approx imately 3/4” LOWER IN THE FRONT THAN THE RE AR.
OPERATION GR60/72 02/07 Operation Section 4- 13 © 2007 Alamo Group In c. OPERA TION 8.1 Driveline Length Check When fitting the mower to the tractor , the telescoping dr iveline must be inspected to .
OPERATION GR60/72 02/07 Operation Section 4- 14 © 2007 Alamo Group Inc. OPERA TION GR60 Mowers Only Shorten the driveline profiles as follows: • Remove the drive line fro m the tractor . • Raise and lower the mower to find the position with the shorte st dist ance between the tr actor PT O shaft and cutter ge arbox.
OPERATION GR60/72 02/07 Operation Section 4- 15 © 2007 Alamo Group In c. OPERA TION 9. PRE-OPERA TION INSPECTION AND SERVICE Before each use, a pre-ope ration inspection and se rvice of the implement and tractor must be performed.
OPERATION GR60/72 02/07 Operation Section 4- 16 © 2007 Alamo Group Inc. OPERA TION 9.1 T racto r Pre-Operation Inspection/Service Refer to the tr actor operator’s manual to ensure a complete pre-operation inspection and scheduled service is performed accordi ng to the manufacturers recommenda tions.
OPERATION GR60/72 02/07 Operation Section 4- 17 © 2007 Alamo Group In c. OPERA TION • Perform scheduled lubrication as det ailed in the maintenance section. • Ensure all decals are in place and legible. • Ensure the dr ive line is secur ely attached to tractor .
OPERATION GR60/72 02/07 Operation Section 4- 18 © 2007 Alamo Group Inc. OPERA TION • Ensure the t ailwheel beam p osition support bolts are properly intalled and tightened.
OPERATION GR60/72 02/07 Operation Section 4- 19 © 2007 Alamo Group In c. OPERA TION • Inspect blades and blade bo lts for looseness and excessive wear . Make sure the mower is securely blocked up before crawling beneath. Replace damaged, worn an d missing blades as complete sets to maint a in rotary balance during operation.
OPERATION GR60/72 02/07 Operation Section 4- 20 © 2007 Alamo Group Inc. OPERA TION Inspect the Blades daily for abnormal wear . REPLACE BOTH BLAD ES on that carrier IMMEDIA TEL Y if either blade has:.
OPERATION GR60/72 02/07 Operation Section 4- 21 © 2007 Alamo Group In c. OPERA TION Rotary Mower PRE-OPERA TION Inspection Mower ID#________________ Make ____________________ Date: ________________ S.
OPERATION GR60/72 02/07 Operation Section 4- 22 © 2007 Alamo Group Inc. OPERA TION T ractor PRE-OPERA TION Inspection Mower ID#________________ Make ____________________ Date: ________________ Shift .
OPERATION GR60/72 02/07 Operation Section 4- 23 © 2007 Alamo Group In c. OPERA TION 10. DRIVING THE TRACTOR AND IMPLEMENT Safe tractor transport requ ires the operator possess a tho rough knowledge of the m odel being operated and precautions to t ake while driving with an a ttached implem ent.
OPERATION GR60/72 02/07 Operation Section 4- 24 © 2007 Alamo Group Inc. OPERA TION 10.1 St arting the T ractor The procedure to st art the tractor is model specific. Refer to the tractor operator’s manual for st arting procedures for your p articular tractor .
OPERATION GR60/72 02/07 Operation Section 4- 25 © 2007 Alamo Group In c. OPERA TION 10.3 Raising the Mower Using the tractor 3-point hi tch control lever , raise the mower off the gro und about 6”, or just h igh enough to cle ar any ground ob stacles.
OPERATION GR60/72 02/07 Operation Section 4- 26 © 2007 Alamo Group Inc. OPERA TION Crossing Ditches and S teep Incline s When crossing ditches with steep banks or go ing up sharp inclines, it is poss.
OPERATION GR60/72 02/07 Operation Section 4- 27 © 2007 Alamo Group In c. OPERA TION Inclines and ditches should be app roached along a line which is at an an gle as shown. This type of path will reduce the possib ility of over-collapse of the driveline and re sulting damag e.
OPERATION GR60/72 02/07 Operation Section 4- 28 © 2007 Alamo Group Inc. OPERA TION M any var i e d o bj ec t s, suc h as w i re, ca bl e, rope, or c h a i ns, can b ecome en t ang l e d i n th e operating p arts of the m ower head. These items could th en swing outside the housin g at greater v elocities than the blades.
OPERATION GR60/72 02/07 Operation Section 4- 29 © 2007 Alamo Group In c. OPERA TION Rotary Mowers are capable under adverse conditions of throwing objects for great distance s (300 feet or more) and causing serious injury or death. Follow safety messages carefu lly .
OPERATION GR60/72 02/07 Operation Section 4- 30 © 2007 Alamo Group Inc. OPERA TION 1 1.4 PTO RPM and Ground S peed Ground speed for mowing will depend upon the height, type , and density of vege tation to be cut. Recommend ed speed for efficient mowe r performance is be tween 2 and 5 mph.
OPERATION GR60/72 02/07 Operation Section 4- 31 © 2007 Alamo Group In c. OPERA TION Mow only in conditions where you have clear visi bility in daylight or with adequate artificial lighting. Never mow in darkness or foggy cond itio ns where you cannot clearly see at least 100 yards in front and to the sides of the tractor and mowe r .
OPERATION GR60/72 02/07 Operation Section 4- 32 © 2007 Alamo Group Inc. OPERA TION Do not let the Blades turn when the Mower Deck is r aised for an y re ason, including clearance or for turning.
OPERATION GR60/72 02/07 Operation Section 4- 33 © 2007 Alamo Group In c. OPERA TION Never stand or allow ano ther person to stand betwee n a running T ractor and the Mower when disconnecting th e Implement from the T ractor 3- point hitch. 11 . 6 S hutting Down the Implement T o shut down the implement, first bring the tra ctor to a complete stop.
OPERATION GR60/72 02/07 Operation Section 4- 34 © 2007 Alamo Group Inc. OPERA TION T o disconnect the mower , first extend the tractor 3- p oint hitch top link to remove tension on the top link h itch pin. When th e pin is loose and easy to rot ate, r emove the pin from the mower .
OPERATION GR60/72 02/07 Operation Section 4- 35 © 2007 Alamo Group In c. OPERA TION 13. MOWER STORAGE Properly prep aring and storing the mowe r at the end of the season is critical to maintaining it s appearance and to help ensure years of de pendable service.
OPERATION GR60/72 02/07 Operation Section 4- 36 © 2007 Alamo Group Inc. OPERA TION Before transporting th e tractor and mower , idle the tractor engine, disengag e the PT O and wait for all mower moving parts to come to a complete stop. Once all mower part s are completely stopped, raise the mower to transport height.
OPERATION GR60/72 02/07 Operation Section 4- 37 © 2007 Alamo Group In c. OPERA TION 14.1 T ransp orting on Public Roadways Extreme caution should be used wh en transporting the tractor an d impleme nt on public roadways.
OPERATION GR60/72 02/07 Operation Section 4- 38 © 2007 Alamo Group Inc. OPERA TION When operating on public roads, have consideration for other road u sers. Pull to the side of the road occasionally to allow all following traffic to pass. Do not exceed the lega l speed limit set in your country for agricultural tra ctors.
OPERATION GR60/72 02/07 Operation Section 4- 39 © 2007 Alamo Group In c. OPERA TION Use adequately sized and rated traile rs and equipment to transport the tractor and imp lement. Consult an author ized dealer to determine the prop er equipment required.
OPERATION GR60/72 02/07 Operation Section 4- 40 © 2007 Alamo Group Inc. OPERA TION 15. TROUBLESHOOTING GUIDE Problem Possible Cause Remedy Not Cutting Clean Blades dull. Sharpen or rep lace Blades. Blade rot ation incorrect. Use correct Blade for Carrier .
OPERATION GR60/72 02/07 Operation Section 4- 41 © 2007 Alamo Group In c. OPERA TION Problem Possible Cause Remedy Blades Wear Fast Cutting in sandy or ro cky conditions Increase cutting height. Blades too sof t. Replace Blades with harde ned , high-quality , Rhino Blades from the manufact urer .
OPERATION GR60/72 02/07 Operation Section 4- 42 © 2007 Alamo Group Inc. OPERA TION Problem Possible Cause Remedy Slip Clutch Slipping Excessive load . Reduce ground speed and/or ra ise (See Clutch Maintena nce). Excessivel y Mower . S prings weak. Replace S prings.
Maintenanc e Sec tio n 5- 1 © 2007 Alamo Group Inc. MAINTENANCE SECTION.
MAINTENANCE GR60/72 02/0 7 Maintenance Section 5-2 © 2007 Alamo Group Inc. MAINTENANCE Before operat ing your Rotary Cutt er , make sure it is properly lubricated and thor oughly insp ected. Only a minimum of time and effort is req uired to regularly lubr icate and maint ain this machine to provide long life and trouble free oper ation.
MAINTENANCE GR60/72 02/0 7 Maintenance Section 5-3 © 2007 Alamo Group Inc. MAINTENANCE Gearbox Lubrication (Figur e Mnt-0001 and Mnt-001 1) The Gearbox was filled wit h oil at the factory . However , it is necessary t hat the opera tor check the Gearbox before operations.
MAINTENANCE GR60/72 02/0 7 Maintenance Section 5-4 © 2007 Alamo Group Inc. MAINTENANCE Driveline Lubrication Grease Fittings are located on the Cross Assembly of each U-Jo int and on the Round Housin g. Grease the U- Joint af ter each 8 hours of use.
MAINTENANCE GR60/72 02/0 7 Maintenance Section 5-5 © 2007 Alamo Group Inc. MAINTENANCE Blade Servicing Inspect blades before each use to determine that they ar e properly insta lled and in good condition. Replace any blade that is bent, excessively nicked, worn, or has any other damage.
MAINTENANCE GR60/72 02/0 7 Maintenance Section 5-6 © 2007 Alamo Group Inc. MAINTENANCE Blade Removal T o remove blades for sharpening or repla cement, remove the cover pl ate on deck of cutter near gear box. Remove lock nut from blade bolt. NOTE: Inspect lock nut af te r rem oval and re place if th reads are damaged.
MAINTENANCE GR60/72 02/0 7 Maintenance Section 5-7 © 2007 Alamo Group Inc. MAINTENANCE Slip Clutch - GR60 A slip clutch is incorporated in the P TO driveline . It is designed to slip, absorb the shock load, and protect the driveline. There are two types of clutches furnished.
MAINTENANCE GR60/72 02/0 7 Maintenance Section 5-8 © 2007 Alamo Group Inc. MAINTENANCE T orque Limiter - GR72 Avoid overheating of the T orque Limiter by too long or too frequent slipping, as this can d amage the fric tion plates and limiter parts. When checking T orque Li m iter for overheating, DO NOT touch with hand .
MAINTENANCE GR60/72 02/0 7 Maintenance Section 5-9 © 2007 Alamo Group Inc. MAINTENANCE GR60 Gearbox Maintenance ITEM QTY DESCRIPTION 11C a s i n g 2 1 Bearing , Lo we r Ou tp ut 3 1 Seal, Lower Outpu.
MAINTENANCE GR60/72 02/07 Main tenance Section 5-10 © 2007 Alamo Group Inc. MAINTENANCE Right Angle Gearbox (Outboard) A ssembly & Disassembly Procedures Input Shaf t Removal 1. Place Gearbox on appropr iate work surface. 2. Remove V en t Plug (item #16) or Complete T op Cover (item #1 8).
MAINTENANCE GR60/72 02/07 Main tenance Section 5-11 © 2007 Alamo Group Inc. MAINTENANCE Output Shaf t Inst allation 1. Install Upper Ou tput Shaft Bearing Cu p (item # 12 ) in to Main Housing from th.
MAINTENANCE GR60/72 02/07 Main tenance Section 5-12 © 2007 Alamo Group Inc. MAINTENANCE St o r a g e Y our rot ary cutter represent s an investment from which you shou ld get the greatest possible benefit.
.
RHINO LIMITED W ARRANTY 1. LIMITED W ARRANTIES 1.01. Servis-Rhino warrants for one year from the purchase date to the original non-commercial, governmental, or municipal purc haser (“Purchaser”) a.
T O THE OWNER/OPERA TOR/DEALER In addition to the standard Lim ited W arranty shown on the facing page, Servis-Rhino also pr ovides: 1.) ONE-YEAR (12 months) {or 6 mo nth for Commercial/Industrial Us ers} LIMITED W ARRANTY on the DRIVELINE component s provided they have been prope rly maintained† and have no t been subjected to abuse or mis-use.
GR60/72-SOM-02/0 7 P/N 00775743C Printed U.S.A GR 60/72 ROT AR Y CUTTER.
SERVIS-RHINO ® 1020 S. Sangamon Ave. Gibson City, IL 60936-9907 Please fold (do not tear), tape, and drop in any mailbox. PLEASE FILL OUT OWNER W ARRANTY REGISTRA TION INFORMA TION SIGN, AND DROP LAST COPY IN ANY MAILBOX.
• I have informed the Purchaser of this product of W arranty terms, provisions, and procedures that are applicable, reviewed the contents of the Operator ’ s Manual including safety equipment, saf.
.
• I have informed the Purchaser of this product of W arranty terms, provisions, and procedures that are applicable, reviewed the contents of the Operator ’ s Manual including safety equipment, saf.
.
• I have informed the Purchaser of this product of W arranty terms, provisions, and procedures that are applicable, reviewed the contents of the Operator ’ s Manual including safety equipment, saf.
デバイスAlamo GR72の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Alamo GR72をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはAlamo GR72の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Alamo GR72の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Alamo GR72で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Alamo GR72を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はAlamo GR72の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Alamo GR72に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちAlamo GR72デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
