ElmoメーカーHV-7000SXの使用説明書/サービス説明書
ページ先へ移動 of 40
VISUAL PRESENTER INSTRUCTION MANUAL Please read this instruction manual carefully before using this Visual Presenter and keep it for future reference..
1 IMPORT ANT SAFEGUARDS Read Instructions All the safety and operating instructions should be read before the appliance is operated. Retain Instructions The safety and operating instructions should be retained for future reference. Heed Warnings All warnings on the product and in the operating instructions should be adhered to.
2 Object and Liquid Entry Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock.
3 Use the Visual Presenter under the rated electrical conditions. Do not leave the Presenter under direct sunlight or by heaters, or the Presenter may be discolored, deformed, or damaged. Do not place the Presenter in any humid, dusty, windy or vibrating location.
4 1. Part Names and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Appearance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5 7. OSD (On-Screen Display) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Main menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6 1. P ART NAMES AND FUNCTIONS 1. Stage 2. Column 3. Camera Head 4. Column Lock Release Button 5. Power Switch 6. Lighting Unit Arm 7. Lighting Unit 7. Lighting Unit 8. Front Operation Panel 10. Wireless Remote Control 11. Remote Control Storage Compartment 12.
7 Part Name Function Reference Page 16 Magnification Button To electronically double the image size. The image is scrolled with the direction buttons. 17 Lighting Buttons To turn ON/OFF the lighting unit. [ ], [ ] (Direction Buttons) When the image size is doubled, the image is scrolled in the arrow direction.
8 Rear Panel OUTPUT MOUSE CONTROL AC IN INPUT RS-232C OUTPUT 12V 0.9A USB RGB OUT S-VIDEO R L AUDIO VIDEO RGB1 RGB2 AUDIO(L/R)1 AUDIO(L/R)2 26. Power Cord Receptacle 38. Audio-in Terminal 1 39. Audio-in Terminal 2 31. RS-232C Terminal 36. Video-in Terminal 1 29.
9 Wireless Remote Control 40. MENU 41. POINTER 42. 2X 44. PAUSE 46 . POSI/NEGA 47 . COLOR/B&W 50. MAIN/MODE 53. TELE 54. WIDE 43. Directions 45 . IMAGE ROTATION 49. BASE 48. UPPER 52. RGB2 51. RGB1 56. FAR 55. NEAR 58. IRIS NORMAL 59. IRIS OPEN 60.
10 Button Name Function Reference Page 40 MENU To call the OSD (On-Screen Display) menu, and to fix the settings. 41 POINTER To display the pointer on the screen.
Connect the mouse to the mouse control terminal on the rear panel. The mouse can control the display and movement of the OSD and video pointer. Reference Page · OSD P.
12 4. SETTING UP (1) Unfold the lighting unit arms fully until they come to the deadend. Unfold arm 1 and then arm 2 as illustrated. (2) Press the column lock release button, and raise the column until the column lock release button returns to the original position.
13 Connection to the monitor and the projector Note: Be sure to turn OFF the power supply to all equipment before making any connections to protect the Presenter and all the connected equipment. Note: Hold the cable plug part when connecting or disconnecting the cables.
14 Connection of analog RGB cable 1 DSUB 15P shrinking terminal (Male) Presenter side (DSUB 15P) RGB input terminal unit side (BNC) V ideo output (Red) 2 3 V ideo output (Blue) 4 GND 5 6 GND (Red) 7 G.
15 Restrictions on signal outputs (RGB, Composite video, S-video) Note: The specifications with " " are not effective. Posi/Nega selection Color/B&W selection 2 Electric Zoom Resolution .
16 Connecting the Desk-T op Presenter (HD-80XG) Use the DC OUT socket of the unit to connect ELMO HD-80XG. To INPUT RGB1 or INPUT RGB2 RGB cable for HD-80XG use only (supplied) DC cable (supplied) DC OUT socket DC IN 12V HD-80XG OUTPUT MOUSE CONTROL AC IN INPUT RS-232C OUTPUT 12V 0.
17 5. OPERA TION PROCEDURES (1) Turn ON the power switch. Notes: · Before turning ON the power switch, connection to the monitor should have been completed. · The indication lamp (green LED) on the front operation panel shows the initial setting condition of each function of the Presenter.
18 (1) Press the base button [BASE] on the front operation panel or wireless remote control. The indicator of the base button [BASE] will blink, and the built-in baselight will light up. (2) To present a nega film, press the posi/nega conversion button [POSI/NEGA] on the front operation panel or wireless remote control to change the mode to nega.
19 Storing the Presenter Note: The Presenter can not be stored with the LCD monitor (optional) attached. Before storing, detach the LCD monitor (optional) and monitor bracket (optional), if connected. (3) Fold down the lighting unit arms 3 and 4. Be sure to fold down arm 3 first as per the illustration.
20 6. V ARIOUS FUNCTIONS Lighting The upper lighting unit for presenting material such as printed matter and 3-D object, and the baselight for presenting transparent material, such as slide, and negative film, are built in the Presenter.
21 Table of video-in/out terminal selections Mic. Ext. video signal 1 Ext. audio signal1 Mic. Ext. video signal 2 Ext. audio signal2 Mic. Main camera video signal Main cameravideo signal Main cameravi.
22 Zoom Press the zoom button [TELE] on the front operation panel or wireless remote control, and the image will gradually be enlarged. Press the zoom button [WIDE] on the front operation panel or wireless remote control, and the image will be gradually reduced.
23 Front operation panel Wireless remote control The Presenter features a one-push auto focus function. Once focusing is completed, the auto focus function is released, and the focused position maintains unchanged.
24 Color/B&W selection To present the B&W (Black&White) material such as documents in sharper image with no color blur on the monitor, set to color mode for normal use. To change to B&W mode, press the color/B&W selection button [COLOR / B&W] on the front operation panel or wireless remote control.
25 Iris The iris can be manually adjusted. To open the iris, press the manual iris button [OPEN] . To close the iris, press the manual iris button [CLOSE] . In the manual mode, the iris is fixed regardless of the change in lightness of object. The initial setting is "auto iris.
26 Enlarging the image To double the image. When the button [2X] on the front operation panel or wireless remote control is pressed or the right button of the mouse is clicked, the image is doubled, and at the same time, the scrolling (moving) pointer appears.
27 Use the following buttons on the Mouse for each function: · Left button -----------Each time the mouse is clicked, the pointer and the menu alternately appear and disappear. Wireless remote control When the left button of the mouse is clicked or the menu button [MENU] on the remote control is pressed, the OSD menu and the pointer appear.
28 Function To turn ON/OFF the upper lighting unit. When the set menu is displayed for the first time, the previous setting is maintained. When this icon is clicked with the left button of the mouse, the lighting unit is switched. To turn ON/OFF the base lighting unit.
29 Set menu Function The white balance mode is switched among Auto/Manual/One-push. When the set menu is displayed for the first time, the white balance is in the auto mode. Note: In the one-push mode, the adjustment of <RED> and <BLUE> is disabled.
30 Function The sound volume from the microphone jack is adjusted. When the set menu is displayed for the first time, the previous volume setting is maintained. When this icon is clicked with the left button of the mouse then, the volume bar appears. Click the direction buttons to adjust the sound volume with the left button of the mouse.
8. RS-232C SPECIFICA TIONS The Presenter can be controlled by a PC connected to the Presenter through the RS-232C terminal [RS-232C]. Setting up (1) Connect the Presenter to a PC with an RS-232C connection cable. Note: When using an RS-232C cable available in the market, make sure of the connection shown in the page.
32 T able of the communication commands • When the pointer is ON The pointer moves. • When the image enlargement is ON The enlarged image moves. 1: To the right side. 2: To the left side. 3: To the upper side. 4: To the lower side. 5: To the lower left.
Note: " " in the data column means that SPACE [20H] should be transmitted twice. Function Command Parameter Data Comments 0 (VGA) 1 (SVGA) 2 (XGA) 3 (SXGA) 0 (OFF) 1 (90 ° ) 2 (180 ° ) 3 (270 ° ) RS RO Resolution selection Command to switch the resolution.
34 Response data format (Visual Presenter PC) All response data are sent in the ASCII code in correspondence to the parameters in the list of operation commands.
35 If the trouble still remains after checking the above, consult your dealer or an authorized ELMO service center. 9. TROUBLESHOOTING HINTS Symptom Possible cause/countermeasure No Images on TV monitor • Cable is not properly connected to the video-in terminal of monitor.
36 General 10. SPECIFICA TIONS Item Specifications Power source Power consumption AC outlet DC output terminal Outside dimensions Weight Input selection Output terminal Input terminal Ext. control terminal AC120V 60Hz 45W 1 pce. (Max. 400W/Unswitched) DC12V (Max.
37 Camera Item Specifications Lens Shooting speed Shooting area Limit of focus adjustment Zoom Focusing Iris Image pick-up element Total picture elements Effective picture element Sync.
38 Lighting Supplied accessories Options · LCD monitor bracket Note: The specifications are subject to change without notice. Dimensions and weight are approximate.
W ARNING: Unauthorized recording of copyrighted slide films, materials, photographs, etc. may infringe on the rights of copyright owners and be contrary to copyright laws. ELMO CO., L TD. 6-14, Meizen-cho, Mizuho-ku, Nagoya, 467-8567, Japan OVERSEAS SUBSIDIARY COMP ANIES U.
デバイスElmo HV-7000SXの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Elmo HV-7000SXをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはElmo HV-7000SXの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Elmo HV-7000SXの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Elmo HV-7000SXで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Elmo HV-7000SXを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はElmo HV-7000SXの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Elmo HV-7000SXに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちElmo HV-7000SXデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
