ElmoメーカーHV-8000SXの使用説明書/サービス説明書
ページ先へ移動 of 56
INSTRUCTION MANUAL VISUAL PRESENTER Please read this instruction manual carefully before using this Visual Presenter and keep it for future reference. VISUAL PRESENTER HV -8000SX.
- 1 - IMPORT ANT SAFEGUARDS Read Instructions – All the safety and operating instructions should be read before the appliance is operated. Retain Instructions – The safety and operating instructions should be retained for future reference. Heed Warnings – All warnings on the product and in the operating instructions should be adhered to.
- 2 - Grounding or Polarization – This product may be equipped with either a polarized 2-wire AC line plug (a plug having one blade wider than the other) or a 3-wire grounding type plug, a plug having a third (grounding) pin. The 2-wire polarized plug will fit into the power outlet only one way.
- 3 - Damage Requiring Service – Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: When the power-supply cord or plug is damaged. If liquid has been spilled, or objects have fallen into the product.
- 4 - The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
- 5 - BEFORE YOU USE Use the Visual Presenter under the rated electrical conditions. Do not leave the Presenter under direct sunlight or by heaters, or the Presenter may be discolored, deformed, or damaged. Do not place the Presenter in any humid, dusty, windy or vibrating location.
- 6 - CONTENTS 1. PART NAMES AND FUNCTIONS .................................................... 8 Appearance .................................................................................................. 8 Front Panel .............................
- 7 - 8. OSD (On-Screen Display) ............................................................. 33 Main menu ................................................................................................... 33 When the white balance is set ..........
- 8 - 1. P ART NAMES AND FUNCTIONS Appearance 12. Infrared Sensor 3. Camera Head 5. Lighting Unit 6. Lighting Unit Arm 2. Column 13. Mic Jack ( MIC ) 14. Wireless Remote Control 8. Operation Panel 7. Front Panel 15. Scroll Mouse 10. LCD Monitor Bracket Socket 11.
- 9 - Operation Panel 20. Monitor Output Buttons 19. Input Selection Buttons 21. Magnification Button 27. White Balance Button 22. Color/B&W Selection Button 29. Iris Buttons 23. Posi/Nega Conversion Button 24. Image Rotation Button 26. Image Transfer Button 28.
- 10 - AC IN RS-232C DC12V Ethernet MOUSE INPUT S-VIDEO VIDEO L AUDIO R AUDIO ( L/R ) 1 AUDIO ( L/R ) 2 ABCD RGB OUT RGB2 RGB1 OUTPUT ON OFF POWER 31. Power Cord Receptacle [ AC IN ] 32. Power Switch [ POWER ] 33. 12VDC Out Terminal [ DC12V ] 34. Mouse Terminal [ MOUSE ] 39.
- 11 - 0 A SXGA Key alignment and functions: XGA NTSC PA L Over scan Under scan Normal operation Initialization BC D 1 DIP Switch The functions can be switched as follows: [ A ] key: To switch the resolution of video output through the RGB-out terminal [ RGB OUT ] .
- 12 - 46. [ IRIS OPEN ] 47. [ IRIS CLOSE ] 48. [ IRIS NORMAL ] 49. [ FOCUS NEAR ] 51. [ ZOOM TELE ] 53. [ INPUT ] 54. [ LAMP ] 55. [ MOVE ] 56. [ PRESET ] 50. [ FOCUS FAR ] 52. [ ZOOM WIDE ] 57. [ AF ] IRIS OPEN IRIS CLOSE MOVE IRIS NORMAL PRESET FOCUS NEAR INPUT FOCUS FAR LAMP TELE WIDE AF ZOOM Button Name Function Reference Page 46.
- 13 - 30 30 30 30 30 30 30 30 Point the infrared emitting part of the wireless remote control unit at the infrared sensor of the Visual Presenter, located on the top of the column, and press the button for the desired function.
- 14 - Connect the mouse to the mouse terminal on the rear panel. The mouse can control the display and operation of the OSD Menu screen, mouse pointer and the Electronic enlargement. When the left button of the mouse is clicked, the OSD menu and the pointer are displayed.
- 15 - 4. SETTING UP (1) Unfold the lighting unit arms fully until they come to the deadend. Unfold arm 1 and then arm 2 as illustrated. (2) Press the column lock release button, and raise the column until the column lock release button returns to the original position.
- 16 - Connection to the composite video-in terminal Use the supplied RCA video/audio cable or a BNC cable available on the market. AC IN DC12V MOUSE INPUT S-VIDEO VIDEO L AUDIO R AUDIO ( L/R ) 1 AUDI.
- 17 - Analogue RGB signal 10 9 8 7 6 54321 15 14 13 DSUB 15P shrink terminal ( Female ) Pin No. Name 1 Video signal (Red) 2 Video signal (Green) 3 Video signal (Blue) 4 N.C 5 GND 12 11 Signal allocation Pin assignment Video signal Horizontal synchronized signal Vertical synchronized signal Analogue 0.
- 18 - 5. ST ORING THE PRESENTER (1) Turn OFF the power switch, and unplug the power cord and the video cable. (2) Turn the main camera head as illustrated until it is stopped. Note: Be sure to set the camera head in the illustrated position before storing.
- 19 - 6. OPERA TION PROCEDURES (1) Turn ON the power switch. Note: Before turning ON the power switch, connection to the monitor should have been completed. Note: When the power switch is turned ON, the lighting unit lights up. Note: If the power switch is turned ON immediately after being turned OFF, the Presenter may not operate.
- 20 - (1) Press the base button [BASE] on the front panel or the lamp button [LAMP] on the wireless remote control to light up the base light (transparent lighting unit) built in the stage. (2) To present a nega film, press the posi/nega conversion button [POSI / NEGA] on the operation panel to change the mode to [N] (Negative).
- 21 - The upper lighting unit for presenting material such as printed matter and 3-D objects, and the baselight for presenting transparent material, such as slide, and negative films, are built in to the Presenter.
- 22 - The respective images from two different sources such as a PC and an Elmo Presenter "HV-100XG" can be alternately presented on a TV by selecting the source by pressing the desired input selection buttons without changing the cable connections.
- 23 - Video-out Terminal Output signal Main camera video signal Microphone Microphone External video signal 1 External audio signal 1 Monaural Monaural RGB1 Stereo 1 (L/R) Microphone External video s.
- 24 - Signal Frequency Resolution (Number of lines) Polarity of the synchronized signal ( P: Positive, N: Negative ) Mode name VGA1 VGA2 VGA3 VGA@60Hz VGA@72Hz VGA@75Hz VGA@85Hz SVGA@56Hz SVGA@60Hz S.
- 25 - Operation panel Color / B&W selection To present the B&W (Black&White) material such as documents. Sharper image with no color blur on the monitor can be produced.
- 26 - Operation panel When the image rotation button [IMAGE ROTATION] on the operation panel is pressed, the image rotates. Every time the image rotation button [IMAGE ROTATION] is pressed, the image rotates counterclockwise by 90°. When the freeze button [PAUSE] on the operation panel is pressed, the image from the main camera freezes.
- 27 - To present the material with a little half tone such as documents. Images with sharp characters and lines contrasty with background can be obtained. When the contrast button [CONTRAST] on the operation panel is pressed, the indicator lamp lights up, and the image becomes contrasty.
- 28 - Operation panel IRIS OPEN IRIS CLOSE MOVE IRIS NORMAL PRESET LAMP Wireless remote control Iris To adjust the Auto iris level of the lens. Press the iris button [OPEN] on the operation panel or the iris open button [IRIS OPEN] on the wireless remote control, and the iris will open.
- 29 - FOCUS NEAR FOCUS FAR TELE WIDE ZOOM Operation panel Wireless remote control Focus Auto Focus Press the auto focus button [AUTO FOCUS] on the front panel or the auto focus button [AF] on the wireless remote control, and the auto-focus will be activated.
- 30 - Powered Manual Focus To focus on specific part of the material, such as 3-D material. Press the focus button [NEAR] or [FAR] on the operation panel or the focus button [FOCUS NEAR] or [FOCUS FAR] on the wireless remote control. Note: The auto focus functions up to approx.
- 31 - LCD monitor bracket socket The LCD monitor bracket socket is used for attaching an LCD monitor (optional) with an LCD monitor bracket (optional).
- 32 - PC link software “Image Mate” When the “Image Mate” is installed in the PC, the following operations are available: • Image data transfer to the PC • Operation of the Presenter by the PC For details, refer to the installation manual of “Image Mate” and “manual.
- 33 - Icon Name Upper light ON/OFF T o turn ON/OFF the upper light. When the Presenter is turned ON, the upper light remains at the previously sa ved settings. Base light ON/OFF T o turn ON/OFF the base light. When the Presenter is turned ON, the base light remains at the previously sa ved settings.
- 34 - Pointer T o change the color and shape of the pointer on the screen. Every time the left b utton of the mouse is clicked, the icon pointer is switched in order of “ White arrow Blue arro w Y ello w arrow Red arrow ” and “ White line Blue line Y ellow line Red line ” .
- 35 - Icon Name White balance T o display the White Balance Adjustment menu. When the left button of the mouse is click ed again, the White Balance Adjustment menu is closed. Auto T o set the white balance in the A UTO FOLLO W mode (initial setting).
- 36 - 9. NETWORK FUNCTIONS By connecting this Presenter to the network using Ethernet (10BASE-T/100BASE-TX), the following functions are made available from the host (e.g., PC) on the network: • Web server functions – Displaying quasi-moving images, displaying static images and operating remote control through the Web browser.
- 37 - Connection to the network • Connection using HUB Connect the Ethernet terminal (RJ-45) of the Presenter to the HUB port with an Ethernet straight cable (UTP Category 5).
- 38 - • Then, the Configurations page is displayed. Confirm the settings, and click the link [Network Configuration] .To display the Network Setting Input page, the authentication by the login password is required.
- 39 - Initialization of the network settings If the connection from the network is disabled due to destruction of the network settings or disremembering of the set value, reset the settings to the fa.
- 40 - Display of static images By clicking the links [SXGA], [VGA] and [QVGA] at the HV-800SX/8000SX/ 8500SX page, the quasi-moving image page and the REFRESH page, the static images of 1280 X 1024, 640 X 512 and 320 X 256 in size can be displayed, respectively.
- 41 - Operation of remote control When the link [CONTROL] at the quasi-moving image page is clicked, the CONTROL page is displayed. At the CONTROL page, the lighting can be changed, the zoom can be a.
- 42 - Setting up • Start the Web browser from the host connected to the Presenter. • Enter the IP address or host name (if allocated) of the Presenter, following [http://], in the address column of the Web browser provided for entering the URL to be opened.
- 43 - FTP server functions – Transferring image files The host connected to the Presenter on the network can obtain the static image files of 3 sizes, 1280 X 1024 (file name: sxga.jpg), 640 X 512 (file name: vga.jpg) and 320 X 256 (file name: qvga.
- 44 - Item Outline IP Address The IP address of the Presenter. Specifies the value allocated by the administrator of the network in use. Factory set to 192.168.0.100. root password The password for setting up the network and using telnet. Not factory set.
- 45 - Command Corresponding command Response Operation USER To enter the user name 331, 500, 530 PASS To enter the password 230, 500, 503, 530 PORT To notify the data port No.
- 46 - 54321 9876 1 2 3 4 5 6 7 8 9 CD RXD TXD DTR SG DSR RTS CTS RI CD RXD TXD DTR SG DSR RTS CTS RI (CI) 1 2 3 4 5 6 7 8 9 54321 9876 DSUB-9P ( Female) PC side : DSUB-9P ( Female) Visual Presenter side (DSUB-9P) PC side (DSUB-9P) 10.
- 47 - Table of the communication commands Function Command Parameter Data Auto Focus AF Command to execute the one-step Auto Focus. Posi/Nega conversion NP ( POSI ) ( NEGA ) Command to convert Posi/Nega. Color/B&W selection CB ( COLOR ) ( B&W ) Command to select Color/B&W.
- 48 - Data format specifications ( OFF ) ( 90 ° ) ( 180 ° ) ( 270 ° ) Function Command Parameter Data Gamma switch GM ( 1.0 ) ( 0.9 ) ( 0.8 ) ( 0.7 ) ( 0.6 ) ( 0.5 ) ( 0.4 ) ( 0.3 ) Command to switch the gamma set value of the image. Image rotation RO Command to rotate the image.
- 49 - S T X Po s i /Nega Color /B&W P ointer display Image enlargement Local Lock out E T X Input selection Lighting selection Freeze S T X Image rotation Aperture election White balance selectio.
- 50 - Transmission specifications • Full duplex start-stop sync. mode • Start bit : 1 bit • Data bit : 8 bits • Stop bit : 1 bit • Parity bit : None • X parameter : None • Baud rate (Co.
- 51 - 1 1. TROUBLESHOOTING HINTS No Images on TV monitor • • • • • • • • • • • • • • Image is too dark. The image is striped • Brightness tone is out of order . Symptom Possible cause / countermeasure Cable is not properly connected to the video-in terminal of monitor.
- 52 - 12. SPECIFICA TIONS Item General Power source AC100-240V 50Hz/60Hz Power consumption 0.7A-0.3A Weight 10.5kg (23.2lbs) (main body only) Input selection Main body / External 2 systems Output ter.
- 53 - Item Lens f = 7.2 - 72mm (10 - time zoom), F2.8 Shooting speed 7.5 frames / sec Limit of focus adjustment From the stage surface to 100mm (3.9 in) above the stage surface Zooming Electromotive .
- 54 - Options • 5" TFT LCD color monitor kit (LM-5011N), LCD monitor bracket (MS-500) Accessory Lens (ICL-430) Note : For the RCA pin, use a pin plug compliant with RC-6703.
- 55 - W ARNING: Unauthorized recording of copyrighted slide films, materials, photographs, etc. may infringe on the rights of copyright owners and be contrary to copyright laws. ELMO CO., L TD. 6-14, Meizen-cho, Mizuho-ku, Nagoya, 467-8567, Japan OVERSEAS SUBSIDIARY COMPANIES U.
デバイスElmo HV-8000SXの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Elmo HV-8000SXをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはElmo HV-8000SXの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Elmo HV-8000SXの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Elmo HV-8000SXで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Elmo HV-8000SXを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はElmo HV-8000SXの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Elmo HV-8000SXに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちElmo HV-8000SXデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
