ElmoメーカーVisual Presenter HV-100XGの使用説明書/サービス説明書
ページ先へ移動 of 16
HV -100XG INSTRUCTION MANUAL VISUAL PRESENTER Please read this instruction manual carefully before using this Visual Presenter and keep it for future reference.
- 1 - IMPORT ANT SAFEGUARDS Read Instructions – All the safety and operating instructions should be read before the appliance is operated. Retain Instructions – The safety and operating instructions should be retained for future reference. Heed Warnings – All warnings on the product and in the operating instructions should be adhered to.
- 2 - Grounding or Polarization – This product may be equipped with either a polarized 2-wire AC line plug (a plug having one blade wider than the other) or a 3-wire grounding type plug, a plug having a third (grounding) pin. The 2-wire polarized plug will fit into the power outlet only one way.
- 3 - Damage Requiring Service – Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: When the power-supply cord or plug is damaged. If liquid has been spilled, or objects have fallen into the product.
- 4 - The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
- 5 - BEFORE YOU USE Use the Visual Presenter under the rated electrical conditions. Do not leave the Presenter under direct sunlight or by heaters, or the Presenter may be discolored, deformed, or damaged. Do not place the Presenter in any humid, dusty, windy or vibrating location.
- 6 - CONTENTS IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 BEFORE YOU USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1. PART NAMES AND FUNCTIONS . . . . . . . . . . . . . . .
- 7 - Camera Head 1 Arm 2 Base Unit 3 Main Stage 4 Auxiliary Stage 5 Lamp Switch [LAMP] 7 Image Input Selection Switch [INPUT] 8 Power Switch [POWER] 9 Power Terminal [DC IN 12V] 10 AC Adapter 13 Analog RGB Cable 12 Accessory Case 11 Lamp 6 1.
- 8 - Name Camera Head Arm Base Unit Main Stage Auxiliary Stage Lamp Lamp Switch [LAMP] Image Input Selection Switch [INPUT] Power Switch [POWER] Power Terminal [DC IN 12V] Accessory Case Analog RGB Cable AC Adapter Function Moving up/down the camera head can change the size of an object in display on the monitor screen smoothly.
- 9 - Zoom Lamp 15 Digital Zoom Button [DIGITAL ZOOM] 14 Gain Button [GAIN] 16 Auto White Balance Switch [AWB] 17 Auto Electronic Shutter Switch [AES] 18 Gamma Value Selection Switch [ ] 19 RGB-in Terminal [RGB INPUT] 20 RGB-out Terminal [RGB OUTPUT] 21 -Normally ON -Normally ON -[NORM.
- 10 - Name Digital Zoom Button [DIGITAL ZOOM] Zoom Lamp Gain Button [GAIN] Auto White Balance Switch [AWB] Auto Electronic Shutter Switch [AES] Gamma Value Selection Switch [ ] RGB-in Terminal [RGB INPUT] RGB-out Terminal [RGB OUTPUT] Function To operate digital zoom.
- 11 - 2-1 SETTING UP OPEN OPEN ST AGE ST AGE OPEN OPEN ST AGE ST AGE <Accessory case> AC adaptor Analog RGB cable 2. SETTING UP AND ST ORING Latch parts Make sure that the power switch [POWER] is OFF, and then remove all cords connected to the Presenter.
- 12 - Note: - Analog NTSC or S-Video monitors can not be used. - A monitor or projector having a resolution of 1024x768 is recommended. Example of connection To power outlet To the RGB-in terminal of.
- 13 - • Is the analog RGB cable connected properly? • Is the AC adapter inserted correctly? • Is the DC jack inserted firmly in the power terminal [DC IN 12V] of the Presenter? • Is the power switch [POWER] ON? • Is the image-in selection switch [INPUT] set at [RGB IN] ? Symptom No image is on the monitor or project.
- 14 - General Power voltage 12VDC Power consumption 9VA Outside dimensions <Unfolded> 361mm(W)x282mm(D)x161-284mm(H) (14.2in.(W)x11.1in.(D)x6.3-11.2in.(H)) <Folded> 59mm(W)x282mm(D)x161mm(H) (2.3in.(W)x11.1in.(D)x6.3in.(H)) Mass 1.5kg (3.
W ARNING: Unauthorized recording of copyrighted slide films, materials, photographs, etc. may infringe on the rights of copyright owners and be contrary to copyright laws. ELMO CO., L TD. 6-14, Meizen-cho, Mizuho-ku, Nagoya, 467-8567, Japan OVERSEAS SUBSIDIARY COMPANIES U.
デバイスElmo Visual Presenter HV-100XGの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Elmo Visual Presenter HV-100XGをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはElmo Visual Presenter HV-100XGの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Elmo Visual Presenter HV-100XGの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Elmo Visual Presenter HV-100XGで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Elmo Visual Presenter HV-100XGを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はElmo Visual Presenter HV-100XGの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Elmo Visual Presenter HV-100XGに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちElmo Visual Presenter HV-100XGデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
