Elo TouchSystemsメーカー1930Lの使用説明書/サービス説明書
ページ先へ移動 of 33
USER MANUAL Elo T ouch Solutions 1930L/1931L T ouchmonitor SW602163 Rev A.
User Manual: 1930L/1931L SW602163 Rev A, Page 2 of 33 Copyright © 2014 Elo T ouch Solutions, Inc. All Rights Reserv e d. No part of this publication may be rep r oduced, transmitted, transcribed, sto.
User Manual: 1930L/1931L SW602163 Rev A, Page 3 of 33 T able of Content s Chapter 1: Introduction .............................................................................. 4 Chapter 2: Installation ............................................
User Manual: 1930L/1931L SW602163 Rev A, Page 4 of 33 Chapter 1: Introduction Product Description Y our new touchmonitor combines the reliabl e performance of Elo T ouch Solutions touch products with the latest development s in touchscreen technology and display design.
User Manual: 1930L/1931L SW602163 Rev A, Page 5 of 33 Chapter 2: Inst allation Unp acking the T ouchmonitor Open the carton and verify that the following items are present: T ouchmonitor with prot.
User Manual: 1930L/1931L SW602163 Rev A, Page 6 of 33 Connector Panel & Interfaces T ouchmonitor Connections 1. Connect the DVI or VGA video cables between the monitor ’ s DVI/VGA input connectors and your DVI/VGA video source. T ighten the vi deo cable’ s screws for best performance.
User Manual: 1930L/1931L SW602163 Rev A, Page 7 of 33 Inst alling the T ouch T echnology Sof tware Drivers Some software inst allation is required for your iT ouch Plus touchmonitor to work with your computer . No additional drivers ar e required for your projected-capacitive touchmonitor , it uses Windows HID drivers.
User Manual: 1930L/1931L SW602163 Rev A, Page 8 of 33 Select the applicable driver from the Elo T ouch Solu tions website and download: For Windows 7 installations, double-click on EloSetup Inst aller.
User Manual: 1930L/1931L SW602163 Rev A, Page 9 of 33 After accepting the end-user license agreement, the system will initia lize to setup installation of drivers. T o complete setup, reboot system by clicki ng on “Reboot Now” butt on. Click on “One More Minute” if more time is needed with increment s of 1 minute.
User Manual: 1930L/1931L SW602163 Rev A, Page 10 of 33 Note: System will automatically reboot wh en “T ime left” counter reaches “0”. For Windows XP installations, double-click on the icon fro.
User Manual: 1930L/1931L SW602163 Rev A, Page 1 1 of 33 Click on “Unzip” button to unzip files..
User Manual: 1930L/1931L SW602163 Rev A, Page 12 of 33 Select one or more of the driver s to install. Click on “Next” After accepting the end-user license agree ment, the drivers will finish installing. Reboot your computer after the inst all is complete.
User Manual: 1930L/1931L SW602163 Rev A, Page 13 of 33 Chapter 3: Mounting General Mounting Information The OSD text can be rotated through the OSD menu to better suit your mounting orientation. Side Bracket Mount Threaded holes are provided on the back of t he monitor for mounting using the provided brackets.
User Manual: 1930L/1931L SW602163 Rev A, Page 14 of 33 Rear VESA Mount A four-hole 100x100mm mounting pattern for M4 screws is provided on the rear of the monitor .
User Manual: 1930L/1931L SW602163 Rev A, Page 15 of 33 Chapter 4: Operation Power The touchmonitor ships in an ON st ate. T o turn the touchmonitor on or off, press the touchmonitor power button on the OSD controller once.
User Manual: 1930L/1931L SW602163 Rev A, Page 16 of 33 touchscreen technology . T o use multiple iT ouch Plus monitors , plug in monitors to calibrate, double-click on the EloConfig desktop shortcut to run Elo T ouc hscreen Configuration screen. Click on “Calibrate T ouch Screens…” to calibrate multiple monitors.
User Manual: 1930L/1931L SW602163 Rev A, Page 17 of 33 T ap monitor screen to identify moni tor ’s identity as shown below . Identity of the monitor wil l display .
User Manual: 1930L/1931L SW602163 Rev A, Page 18 of 33 Calibrate touch as target s appear on corners of the screen. Follow instructions on screen. T est touch/drag performance to verify calibra tion accuracy , “Accept” or “Retry” to redo calibration process.
User Manual: 1930L/1931L SW602163 Rev A, Page 19 of 33 Projected Cap acitive T ouch T echnology When connected to Windows 7 co mputers, the touchmonitor can report 4 simultaneous touches. When connected to Windows XP computer s, the touchmonitor reports single touches.
User Manual: 1930L/1931L SW602163 Rev A, Page 20 of 33 On-Screen Display (OSD) Four OSD buttons are provided on the rear of the monitor to adjust various display p arameters. The same buttons are provided on an optional OS D Control Box which can plug into the RJ-45 connector on the touchmonitor connector panel.
User Manual: 1930L/1931L SW602163 Rev A, Page 21 of 33 V -position Moves the image vertically on the di splay in single-pixel increments. Default: centered. Only applicable for VGA input video Aspect Ratio Switches the scaling method between Full Scaling and Maintain Aspect Ratio.
User Manual: 1930L/1931L SW602163 Rev A, Page 22 of 33 touchmonitor is unplugged or powered off and on. If there is a power failure, the touchmonitor settings will not default to the factory specifications. OSD and Power Lockout s Press and hold the “Menu” and “Up” buttons fo r two seconds to enable/disable the OSD Locking feature.
User Manual: 1930L/1931L SW602163 Rev A, Page 23 of 33 Chapter 5: T echnical Support If you are experiencing trouble with your touc hmonitor , refer to the following suggestions. If the problem persists, please cont act your local dealer or contact Elo T ouch Solutions Customer Service.
User Manual: 1930L/1931L SW602163 Rev A, Page 24 of 33 T echnical Assist ance Vis it www .elotouch.com/products for technical specifications for this device Vis it www .elotouch.com/go/websupport for online self-help. Vis it www .elotouch.com/go/contactsupport for technical support.
User Manual: 1930L/1931L SW602163 Rev A, Page 25 of 33 Chapter 6: Safety & Maintenance Safety T o avoid risk of electric shock, follow a ll safety notices and do not disassemble the touchmonitor .
User Manual: 1930L/1931L SW602163 Rev A, Page 26 of 33 W aste Electrical & Electronic Equipment Directive (WEEE) This product should not be disposed of with household waste. It should be deposited at a facility that enabl es recovery and recycling.
User Manual: 1930L/1931L SW602163 Rev A, Page 27 of 33 Chapter 7: Regulatory Information I. Electrical Safety Information: Compliance is required with respect to the voltage, frequency , and current requirements indicated on the manufacturer ’s label.
User Manual: 1930L/1931L SW602163 Rev A, Page 28 of 33 as required by EMC Directive 2004/108/EC as indi cated in European S tandard EN 55022 Class B and the Low V oltage Directive 2006/95/EC as indicated in European S tandard EN 60950. General Information to all Users: This equi pment generates, uses and can radiate radio frequency energy .
User Manual: 1930L/1931L SW602163 Rev A, Page 29 of 33 III. Agency Certifications The following certifications and marks have been issued or declared for this monitor: Australia RCM Canada CUL, IC China CCC Europe CE Japan VCCI Korea KC, e-S tandby Mexico CoC T aiwa n BSMI United S tates FCC, UL IV .
User Manual: 1930L/1931L SW602163 Rev A, Page 30 of 33 Explanation of Markings (1). In accordance with the SJ/T1 1364-2006 requi rement, the electronic information products are marked with the following pollution control logo. The Environment-Friendly Use Period for this product is 10 years.
User Manual: 1930L/1931L SW602163 Rev A, Page 31 of 33 Operating Conditions: T emperature: 0°C - 40°C Humidity: 20% to 80% (non-condensing) Altitude: 0 to 3,048m S torage Conditions: T emperature: -.
User Manual: 1930L/1931L SW602163 Rev A, Page 32 of 33 Chapter 8: W arranty Information See http://www .elotouch.com/Support/warranty .asp for more information.
User Manual: 1930L/1931L SW602163 Rev A, Page 33 of 33 Check out Our W ebsite! www .elotouch.com Get the latest... Product Information S pec ifications Upcoming events Press releases Software drivers Getting in T ouch with us T o find out more about the extensive range of Elo touch solutions, visit our website at www .
デバイスElo TouchSystems 1930Lの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Elo TouchSystems 1930Lをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはElo TouchSystems 1930Lの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Elo TouchSystems 1930Lの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Elo TouchSystems 1930Lで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Elo TouchSystems 1930Lを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はElo TouchSystems 1930Lの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Elo TouchSystems 1930Lに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちElo TouchSystems 1930Lデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
