Elo TouchSystemsメーカー2201Lの使用説明書/サービス説明書
ページ先へ移動 of 22
User Manual 2201L T ouchmonitor User Manual – 2201L SW601363 Rev B - Page 1 of 22.
User Manual – 2201L SW601363 Rev B - Page 2 of 22 Copyright © 201 1 T yco Electroni cs. All Rights Reserved. No part of this publication may be reproduced, trans mitted, transcribed, stored in a re.
User Manual – 2201L SW601363 Rev B - Page 3 of 22 T able of Content s Chapter 1 - Introduction ........................................................................... 4 Chapter 2 – Inst allation ................................................
User Manual – 2201L SW601363 Rev B - Page 4 of 22 Chapter 1 - Introduction Product Description Y our new touchmonitor combines Elo T ouc hS ystems’ reliable performance with the latest developments in touch technology and display desi gn. This combination of features creates a natural flow of information betwe en a user and the touchmonitor .
Chapter 2 –Installation Unp acking the T ouchmonitor Open the carton and verify the following items are present: T ouchmonit or with protective sheet for it s face Elo T ouc hT ools CD Q.
T ouchmonitor Connections 1. Connect the DVI or VGA video cables between the monitor ’s DVI/VGA input connectors and your DVI/VGA video source, respectively . T ighten the video cable’s screws for best performance. 2. Connect the USB touch cable between the m onitor ’s USB connector and your PC’ s USB port.
Inst alling the T ouch T echnology Sof tware Drivers Some software inst allation is required for your touchmonitor to work with your computer . The drivers for the Windows 7, XP , V ista, W e POS, and 32-bit Server 2003 operating systems are provided with your touchmonitor on a CD.
For Windows XP , Vist a, Server 2003, Server 2008, and WEPOS installations, install the “USB T ouchscreen Drivers” when prompted: For Windows 7 installa tions, check the “Install dr iver” box .
User Manual – 2201L SW601363 Rev B - Page 9 of 22 After accepting the end-user licen se agreement, the drivers will finish installing. Reboot your computer after the inst all is complete.
Chapter 3 – Mounting General Mounting Information The OSD text can be rotated through the OSD menu to better suit your mounting orientation. The holes located on the sides an d top of the touchmonitor case are for ventilation. Do not block, cover , or insert anyth ing inside the ventilation slots.
User Manual – 2201L SW601363 Rev B - Page 1 1 of 22 Chapter 4 – Operation Power T o turn the touchmonitor on or off, pr ess the touchmonitor power button once.
Y our touchmonitor will likely not require video adjustments. However , for analog VGA video, variations in video graphic card outputs may require user adjustment s through the OSD to optimize the quality of the touchmonitor ’s displayed image. These adjustment s are “remembered” by the touchmonito r .
User Manual – 2201L SW601363 Rev B - Page 13 of 22 V -position Moves the image vertically on the di splay in single-pixel increments. Default: centered. Only applicable for VGA input video Aspect Ratio Switches the scaling method between Full Scaling and Maintain Aspect Ratio.
User Manual – 2201L SW601363 Rev B - Page 14 of 22 they are entered. This featur e saves you from having to rese t your choices every time the touchmonitor is unplugged or powered off and on. If there is a power failure, the touchmonitor settings will not default to the factory specifications.
User Manual – 2201L SW601363 Rev B - Page 15 of 22 Chapter 5 – T echnical Support If you are experiencing trouble with your touc hmonitor , refer to the following suggestions. If the problem persists, please cont act your loca l dealer or cont act Elo T ouchSystems Customer Service.
Chapter 6 - Safety & Maintenance Safety T o avoid risk of electric shock, follow all safety notices and do not disassemble the touchmonitor . They are not user-serviceable. The slots located on the sides and top of the touchmonitor case are for ventilation.
W aste Electrical & Electronic Equipment Directive (WEEE) This product should not be disposed of with hous ehold waste. It shoul d be deposited at a facility that enables recovery and recycling.
User Manual – 2201L SW601363 Rev B - Page 18 of 22 Chapter 7 – Regulatory Information I. Electrical Safety Information: Compliance is required with respect to the voltage, frequency , and current requirements indicated on the manufacturer ’s label.
User Manual – 2201L SW601363 Rev B - Page 19 of 22 iii) Reorient the affect ed receiver’s antenna. iv) Plug the digital device into a dif ferent AC outlet so the digital device and the receiver are on different branch circuit s. v) Disconnect and remove any I/O cables that th e digital device does not use.
Explanation of Markings (1). In accordance with the SJ/T1 1364-2006 require ment, the electronic information products are marked with the following pollution control logo.
User Manual – 2201L SW601363 Rev B - Page 21 of 22 Chapter 8 – W arranty Information Except as otherwise stated herein, or in an order acknowledgment delivered to Buyer , Seller warrants to Buyer that the Product shall be free of defect s in materials and workmanship.
User Manual – 2201L SW601363 Rev B - Page 22 of 22 Check out Elo’ s W ebsite! www .elotouch.com Get the latest... Product Information Specifications News on upcoming events Press r.
デバイスElo TouchSystems 2201Lの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Elo TouchSystems 2201Lをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはElo TouchSystems 2201Lの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Elo TouchSystems 2201Lの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Elo TouchSystems 2201Lで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Elo TouchSystems 2201Lを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はElo TouchSystems 2201Lの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Elo TouchSystems 2201Lに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちElo TouchSystems 2201Lデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。