EMCメーカー69001166の使用説明書/サービス説明書
ページ先へ移動 of 330
EMC Cor poratio n Corpor ate He adqu arters : Hopkinto n, MA 01748 -9103 1 -508 -4 35 -1000 ww w .EMC.c om EMC Installation Roadmap for CX-Series and FC-Series Storage Systems P/N 0690011 66 REV A17.
EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms ii Copyrig ht © 2002 - 200 5, EMC Corporati on. All ri ghts reserve d. Publ ished Januar y, 2005 EMC believes the informati on in this publicat io n is accurate as of its publicatio n date.
EMC Installation Roadmap f or CX-Ser ies and F C-Series Storage Systems iii Cha pter 1 AIX Installation Checklist s PowerPath Configurations for AIX ............... ....................... ......... 1-2 Requir ed Host Software Revisi ons ......... ...
EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms iv Contents Required H ost So ftware Revisio ns ..... ....................... .......... 2-46 Prer equisites ......... ............................ ....................... .....
v EMC Installation Roadmap f or CX-Ser ies and F C-Series Storage Systems Conte nts Cha pte r 4 NetW a re Insta llatio n Check lists PowerPath Configurations for NetW are ................... ................... 4-2 Required H ost Softwar e Revisions .
EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms vi Contents Chap ter 6 T r u64 UNIX Installa tion Checklist T ru64 UNIX Configurations ............. ...................... ................. ....... 6-2 Prer equisites ........
EMC Installation Roadmap f or CX-Ser ies and F C-Series Storage Systems vii Preface This manu al contains checklists of the tasks required to install an EMC CX-Series or FC4700 -Series storage system .
viii EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Preface Organization Conv entions U sed in This Guide EMC uses the follow ing conventions for notes and caution s. A no te pr esents i nformation that is imp ortant, b u t n ot ha zard -relat ed.
EMC Installation Roadmap f or CX-Ser ies and F C-Series Storage Systems ix Preface Typographical Conv entio ns This manual uses th e fo llowing format conven tions Finding Current Informa tion The most up-to-date information abo ut the CX-Series an d FC-Series storag e system s is posted on the EMC Powerlink ™ webs ite.
x EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Preface Sales and Customer Ser vice Contacts For the list of EMC sal es location s, please access the EMC home page at: http:// www.
AIX Ins tallation C hecklists 1-1 1 Invisible Body T ag This chapter cont ains check lists of the task s require d to instal l a CLARiiON st orage system in a conf iguration with an IBM AIX ® server and PowerPath ® failover software. The sections for the differ ent config urations are ◆ PowerPath Configurations for AIX .
1-2 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms AIX Installation Checklists P ow e rP ath Configurations f or AIX Read this section i f you are installi ng a A IX Powe rPath conf iguration with a new or existing server and a new or existing storage system.
P ow er Path Configur ation s f or AIX 1-3 AIX Installa tion Checklists Prer equisi tes ◆ Y ou m ust have a host th at is • Running an operating system that can support the Navispher e Manage r 6.X browser-based client . For an up-to-d ate list of such opera ting systems, refer to th e Navisphere Mana ger 6.
1-4 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms AIX Installation Checklists Documentation Each checklist refers to some or all of the docu ments listed below . W e recommend that you lo ad these documents on yo ur service laptop before starting the instal lation.
P ow er Path Configur ation s f or AIX 1-5 AIX Installa tion Checklists ◆ EMC CX3 00 2-Gigab it Disk Processor Enc losure (DPE) Setup Gu ide (P/N 300-00 1-276, rev A02 or higher) or EMC CLARiiON CX3.
1-6 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms AIX Installation Checklists P o werPath Chec klist — New AIX S e r ver and Ne w Storage System T asks hig hlighted w ith grey in th e checklist should be completed befor e th e service pr ov ider arrives.
P ow erPath Checklist — New AIX S e rver and New Stor age System 1-7 AIX Installa tion Checklists 6 Ser ver Install Po w e r P a t h ❑ Inser t the P owerP ath i nstallation CD and m ount it.
1-8 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms AIX Installation Checklists 9S t o r a g e S y s t e m Initialize and inst all so ftware enabl ers ❑ Install the Navisphere Ini tialization Uti lity on a non-AIX host on the same subnet as the storag e-system manag ement por ts.
P ow erPath Checklist — New AIX S e rver and New Stor age System 1-9 AIX Installa tion Checklists 13 Swit ches Zone For a SAN ❑ Zone the switches to provide a path from each HBA por t (host i nitiator) to the appropr iate SPs. Switch manag ement documentatio n ❑ If MirrorVi ew is install ed, create any re quired zones for it.
1-10 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms AIX Installation Checklists 15 Stor age Sy stem Conf ig ur e ❑ Use Navisphere M anager to set gen eral storage-sy stem proper ties.
P ow erPath Checklist — New AIX S e rver and New Stor age System 1-11 AIX Installa tion Checklists Y ou ar e now r eady to set up any opti onal softwar e, such as SnapV iew or MirrorV i ew , on the storag e system . 18 Ser ve Make L UNs ava i la bl e t o A I X ❑ Create par ti tions or th e per tinent databas e file systems on the LUNs.
1-12 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms AIX Installation Checklists P o werPath Chec klist — New AIX S e r ver and Existing S torage System T asks hig hlighted w ith grey in th e checklist should be completed befor e th e service pr ov ider arrives.
P ow e rPath Checklist — New AIX Ser ver and Existing Storage System 1-13 AIX Installa tion Checklists 4 Ser ve r Install P owerP ath ❑ Inser t the PowerP ath installati on CD and mou nt it. ❑ Inser t the PowerP ath installati on CD and mou nt it.
1-14 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms AIX Installation Checklists 7S t o r a g e S y s t e m Up date soft ware ❑ If the following software is currently ins t.
P ow e rPath Checklist — New AIX Ser ver and Existing Storage System 1-15 AIX Installa tion Checklists 8S t o r a g e S y s t e m Set proper ties for Pow e r Pa t h ❑ Use Navisphere Manager’s Fa.
1-16 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms AIX Installation Checklists 9S e r v e r Cable to switches or st orag e syste m ❑ Cable the HBA por ts to the switch connected to t he storage system or to SP por ts. ❑ Cable the HBA por ts to the switc h connected to the storage system or to SP por ts.
P ow e rPath Checklist — New AIX Ser ver and Existing Storage System 1-17 AIX Installa tion Checklists 11 Serv er Ma ke ta rget S Ps av ailable ❑ On the ser ver: • Download emc_ cfgmgr .s h from ftp://ftp.emc.com/pub/elab/ power path/aix . • Execute the f ol lowing commands cfgmgr ❑ On the ser ver: • Download emc_ cf gmgr .
1-18 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms AIX Installation Checklists 11 Serv er Ma ke ta rget S Ps av ailable (cont.
P ow e rPath Checklist — New AIX Ser ver and Existing Storage System 1-19 AIX Installa tion Checklists 14 Serv er Co nfigure de vices ❑ Execute the f ol lowing command: emc_cfgmgr .
1-20 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms AIX Installation Checklists 15 Serv er Make LUNs av ailable to AIX ❑ Create pa rt itions or the per tinent database file sy stems on the LUNs. If AIX does not recogn ize any LUNs, v er ify the connectio n to the Storage Group.
P ow e rPath Checklist — New AIX Ser ver and Existing Storage System 1-21 AIX Installa tion Checklists Y ou ar e now r eady to set up any opti onal softwar e, such as SnapV iew or MirrorV i ew , on the storag e system . 16 Serv er T est P o werP ath with a l icen se ke y (cont.
1-22 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms AIX Installation Checklists P o werPath Chec klist — Existing AIX Ser ver and Ne w Storage System T asks hig hlighted w.
P ow e rPath Checklist — Existing AIX Ser ver and Ne w Storage Syst em 1-23 AIX Installa tion Checklists Ta s k With Access Lo gix Reference Docum ent 1 Server Unmount file syste ms and v ary off v olumes ❑ Unmount any file sys tems that resi de on the storage s ystem.
1-24 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms AIX Installation Checklists 7 Server Set HBA driver para meter s ❑ Make sure the HBA dr iver parameters are s et to the values requi red for CLARiiON and PowerP ath.
P ow e rPath Checklist — Existing AIX Ser ver and Ne w Storage Syst em 1-25 AIX Installa tion Checklists 12 Stor age Syst em Set u p se curit y ❑ Use Navisphere M anager to define a global admini strator and domai n (if not already defined) and any a dditional users.
1-26 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms AIX Installation Checklists 16 Server Make targ et SPs availabl e ❑ Download the following command from f tp://ftp .em c.com/pub/elab/ powerp ath/aix and ex ecute it: emc_cfgmgr .
P ow e rPath Checklist — Existing AIX Ser ver and Ne w Storage Syst em 1-27 AIX Installa tion Checklists 19 Server Configu re de vices ❑ Exec u te the following command: emc_cfgmgr .
1-28 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms AIX Installation Checklists Y ou ar e now r eady to set up any opti onal softwar e, such as SnapV iew or MirrorV i ew , on the storag e system . 21 Server Te s t P o w e r Pa t h with a lic ense key (co nt.
P owerP ath Checklist — Existing AIX Ser ver and Existing Storage System 1-29 AIX Installa tion Checklists P o werPath Chec klist — Existing AIX Ser v er and Exis ting Storage System This checklist assumes that the existing AIX server an d exis ting storage system ar e already connected in a SAN or direct attach configuratio n.
1-30 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms AIX Installation Checklists T ask With Access L ogix Without Access Logix Reference Docum ent 1 Ser ve r Unmou nt file syste ms and vary off v o lu mes ❑ Unmount any file s ystems that reside on the storage syst em.
P owerP ath Checklist — Existing AIX Ser ver and Existing Storage System 1-31 AIX Installa tion Checklists 5 Ser ve r Replac e IB M HB As a nd/or In stall additi onal HB As Note: P owerP ath requires IB M P CI HBAs and the driver suppor te d by IBM f or AIX.
1-32 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms AIX Installation Checklists 8S t o r a g e S y s t e m Up date soft ware ❑ If the following software is currently ins t.
P owerP ath Checklist — Existing AIX Ser ver and Existing Storage System 1-33 AIX Installa tion Checklists 9S t o r a g e S y s t e m Set proper ties for Pow e r Pa t h For new or replacement HBAs .
1-34 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms AIX Installation Checklists 9S t o r a g e S y s t e m Set proper ties for P owerP ath (cont.
P owerP ath Checklist — Existing AIX Ser ver and Existing Storage System 1-35 AIX Installa tion Checklists 10 Serve r Install P owerP ath ❑ Inser t the PowerP ath installati on CD and mou nt it. ❑ Inser t the PowerP ath installati on CD and mou nt it.
1-36 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms AIX Installation Checklists 11 Serve r Cab le additiona l or r eplac ement HB As t o swit ches or st orag e system (co nt.
P owerP ath Checklist — Existing AIX Ser ver and Existing Storage System 1-37 AIX Installa tion Checklists 13 Serve r Ma ke ta rget S Ps av ailable (cont.
1-38 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms AIX Installation Checklists 14 Serve r Co nfigure de vices ❑ If you replaced HBAs or added additional HBAs, use N avisphere Manager to disconnect and then reconnect the ser v er and its Storage Group.
P owerP ath Checklist — Existing AIX Ser ver and Existing Storage System 1-39 AIX Installa tion Checklists 14 Serve r Co nfigure de vices (cont .) ❑ Restar t t he Navisphe re Host Agent or ru n the Navisphere Ser v e r Utilit y with the following AIX commands: Host Agent / etc/rc.
1-40 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms AIX Installation Checklists Y ou ar e now r eady to set up any opti onal softwar e, such as SnapV iew or MirrorV i ew , on the storag e system . 15 Serve r T est P o werP ath with a l icen se key (cont.
HP-UX Insta llation C hecklist 2-1 2 Invisible Body T ag This chapter cont ains a checklist of the tasks required to install CLARiiON st orage in a configura tion with PowerPa th, VERIT AS DMP , or with no EMC failover softwar e. To p i c s a r e ◆ PowerPath Configurations for HP-UX .
2-2 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms HP-UX Installation C hecklist P ow e rP ath Configurations f or HP-UX Read this sectio n if you are instal ling an HP-U X® PowerPath ™ configur ation wi th a new or existing se rver an d a new or e xisting storag e syste m.
P owerP ath Co nf ig urations f or HP-UX 2-3 HP-UX Installation Checklist Required Host Software Revisi ons ◆ HP-UX operati ng system revision listed in the EMC Support Matrix on th e Po werlin k websi te ( http://powerlink.emc.com ) ◆ HBA driver r evision listed in the EMC Suppor t Matrix on the Powerlink webs ite ( http://powerlink.
2-4 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms HP-UX Installation C hecklist ◆ Y ou must have pl anned your LUNs and RAID Gr oups, and Storage Groups if you have Access Lo gix. Be sure to consider requir ements for SAN Copy , Snap V iew , MirrorV iew , an d MirrorV iew/A if you have this s oftware.
P owerP ath Co nf ig urations f or HP-UX 2-5 HP-UX Installation Checklist PowerP ath V ersi on 3.0 for U NIX In stallation and Administration Guide (P/N 300-000 -51 1) ◆ EMC PowerPath V ersion 4.1 Quick Refer ence (P/N) 30 0-001-204) ◆ EMC N avisphere Ho st Agent a nd CL I for HP -UX V ers ion 6.
2-6 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms HP-UX Installation C hecklist ◆ EMC Storage Pr ocessor Enclosure (SPE) CX600-Series Se tup and Cabling Gui de (P/N 01 40.
P o werP a th Ch e ckl ist - Ne w HP-UX Server and New Stor age System 2-7 HP-UX Installation Checklist P ow e rP ath Checklist - Ne w HP-UX Ser ve r and New Storage System T asks hig hlighted w ith g.
2-8 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms HP-UX Installation C hecklist 5S e r v e r Install P o w erP ath ❑ Inser t the P owerP ath i nstallation CD and moun t it. P owerP ath Release Notes and Po wer P ath f or UNIX install ation and administ rator’ s guide ❑ Install P owerPath.
P o werP a th Ch e ckl ist - Ne w HP-UX Server and New Stor age System 2-9 HP-UX Installation Checklist 9S t o r a g e S y s t e m Cable to switch or ser ver and LAN ❑ Connect the s torage system to the sw i tch or HBA por ts.
2-10 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms HP-UX Installation C hecklist 13 Serve r Make ta rget SPs a vai lab le (con t.) ❑ Log in as root an d restar t th e Navisphere Hos t Agent with the following HP-UX co mmands: /sbin/init.
P o werP a th Ch e ckl ist - Ne w HP-UX Server and New Stor age System 2-11 HP-UX Installation Checklist 17 Server Conf igure Pow e r P a t h devices ❑ Use the following P owerP ath command to confi.
2-12 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms HP-UX Installation C hecklist Y ou ar e now r eady to set up any opti onal softwar e, such as SnapV iew or MirrorV i ew , on the storag e system . 18 Server T est P owerP ath with a lice nse key (cont.
P ow e rPath Checkli st - New HP-UX Ser ver and Existing Storage System 2-13 HP-UX Installation Checklist P ow e rP ath Checklist - Ne w HP-UX Ser ve r and Existing Storage System Complete the task s .
2-14 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms HP-UX Installation C hecklist 3 Server Ins tall Ho st Ag ent (cont.) ❑ Edit the Navispher e Host Agent configuration fi le agent.
P ow e rPath Checkli st - New HP-UX Ser ver and Existing Storage System 2-15 HP-UX Installation Checklist 5 CX400, CX600 , or FC4700-Se ries Storage- System Withou t Access Logix Set stora ge-syst em .
2-16 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms HP-UX Installation C hecklist 6 FC4500 Storage- System Withou t Access Logix Set stora ge-syst em type ( cont.
P ow e rPath Checkli st - New HP-UX Ser ver and Existing Storage System 2-17 HP-UX Installation Checklist 8S e r v e r Cabl e to switches or stor age sys tem (cont.) For a 2-Gbit switch - One of the follow ing: • The left LED is green and the righ t LED is off , whi ch indicates that a 1-Gb it SP por t is logged in to the switch por t.
2-18 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms HP-UX Installation C hecklist 10 Stor age S ystem Reg ister HB As ❑ Log in as root and re star t the Navisphere Host Agen t with the following HP-UX commands: /sbin/init.
P ow e rPath Checkli st - New HP-UX Ser ver and Existing Storage System 2-19 HP-UX Installation Checklist 12 CX300, C X400, CX500, CX 600, CX700, or FC4700-Se ries St orage Syst em Set pr operties f or P owerP ath (c ont.
2-20 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms HP-UX Installation C hecklist 13 FC4500 Stor age Syst em Set pr operties f or P owerP ath (c ont.
P ow e rPath Checkli st - New HP-UX Ser ver and Existing Storage System 2-21 HP-UX Installation Checklist 14 Server Make targ et SPs availabl e ❑ Make sure that each HBA s ees only the t argets (SPs.
2-22 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms HP-UX Installation C hecklist 15 Stor age S ystem Configur e If the ser ver will use an existing Stor age Group ❑ Use Navisphere Manager to connect t he ser v er to the Storage Group .
P ow e rPath Checkli st - New HP-UX Ser ver and Existing Storage System 2-23 HP-UX Installation Checklist 16 Server Make ne w LUNs visib le ❑ Log in as root and re star t the Navisphere Host Agen t with the following HP-UX commands: /sbin/init.d/agen t stop /sbin/init.
2-24 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms HP-UX Installation C hecklist 17 Stor age S ystem Set up Eve nt Monitor ❑ Plan your monitor ing configuration.
P ow e rPath Checkli st - New HP-UX Ser ver and Existing Storage System 2-25 HP-UX Installation Checklist Y ou ar e now r eady to set up any opti onal softwar e, such as SnapV iew or MirrorV i ew , on the storag e system . 19 Server T est P owerP at h with a licen se key (cont.
2-26 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms HP-UX Installation C hecklist P ow e rP ath Checklist - Existing HP-UX Ser ve r and Ne w Storage System Complete the task s highlighted with gr ey in the checklist before the service provider arrives.
P ow erPath Checklist - Existi ng HP-UX Ser ver and New S torage Sys tem 2-27 HP-UX Installation Checklist 6S e r v e r Install P ow erP ath ❑ Inser t the P owerP ath i nstallation C D and mount it. P owerPath Release Notes and P owerP ath for UNIX installation and admini strator’ s gui de ❑ Install P owerPath.
2-28 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms HP-UX Installation C hecklist 9 St orage Sy stem Cable to swi tch or ser ver an d LAN ❑ Connect the s torage system to the switch or HBA por ts.
P ow erPath Checklist - Existi ng HP-UX Ser ver and New S torage Sys tem 2-29 HP-UX Installation Checklist 12 Serv er Cable addi ti onal HB As t o switche s or s torag e sy stem ❑ Cable any additional HBA por ts to the s witch conn ected to the storage system or to SP por ts.
2-30 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms HP-UX Installation C hecklist 14 Serv er Mak e tar get SPs avai l a bl e (c o nt .
P ow erPath Checklist - Existi ng HP-UX Ser ver and New S torage Sys tem 2-31 HP-UX Installation Checklist 18 Server Conf igure Pow e r P a t h devices ❑ Use the following P owerPath command to conf.
2-32 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms HP-UX Installation C hecklist Y ou ar e now r eady to set up any opti onal softwar e, such as SnapV iew or MirrorV i ew , on the storag e system . 19 Server T est P owerP ath with a licen se key (cont.
P owerP ath Checklist - Exis ting HP-UX Ser ver and Existing Storage System 2-33 HP-UX Installation Checklist P ow erPath Chec klist - Existing HP-UX Ser ve r and Existing Sto rage System Complete the task s highlighted with gr ey in the checklist before the service provider arrives.
2-34 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms HP-UX Installation C hecklist 5 Server Set HBA driver param ete rs ❑ Make sure the HBA dr iver parameters ar e set to the values required for CL ARiiON and P owerP ath.
P owerP ath Checklist - Exis ting HP-UX Ser ver and Existing Storage System 2-35 HP-UX Installation Checklist 6S e r v e r Set stor age- syste m type (cont.) For a FC4500 storage sys tem navicli - d de vic e systemtyp e -co nfig a where de v ice is the storag e system’s name.
2-36 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms HP-UX Installation C hecklist 7 CX300, CX400 , CX500, CX600 , CX700, or FC 4700-S eries Stor age Syst em Set prop erties f or Pow e r P a t h (cont.
P owerP ath Checklist - Exis ting HP-UX Ser ver and Existing Storage System 2-37 HP-UX Installation Checklist 8 FC450 0 Stor age System Set prop erties f or Pow e r P a t h For a server w ith register.
2-38 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms HP-UX Installation C hecklist 8 FC450 0 Stor age System Set prop erties f or Pow e r P a t h (cont.
P owerP ath Checklist - Exis ting HP-UX Ser ver and Existing Storage System 2-39 HP-UX Installation Checklist 8 FC450 0 Stor age System Set prop erties f or Pow e r P a t h (cont.
2-40 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms HP-UX Installation C hecklist 9S e r v e r Install P ow e rP ath (cont.) ❑ Checkpoint - Us e the follo w ing P owerP at.
P owerP ath Checklist - Exis ting HP-UX Ser ver and Existing Storage System 2-41 HP-UX Installation Checklist 10 Serv er Cable addi ti onal HB As t o swi t ch e s o r stor age s yste m (cont.
2-42 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms HP-UX Installation C hecklist 12 Serv er Mak e tar get SPs av ai lable (cont.
P owerP ath Checklist - Exis ting HP-UX Ser ver and Existing Storage System 2-43 HP-UX Installation Checklist 13 Server Conf igure Pow e r P a t h devices (cont.
2-44 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms HP-UX Installation C hecklist 14 Server T est P owerP ath with a licen se key (cont.) ❑ View the output of the powe rmt display dev= x every=2 command, and verify th at • The state of the uncabled path(s) becomes “dead.
DMP Co nfigurations f or HP -UX 2-45 HP-UX Installation Checklist DMP Conf igurations f o r HP-UX Read this sectio n if you are instal ling an HP- UX VERIT AS DMP config uration with a n ew server and a new CX300, CX500, or CX 700 storage syst em.
2-46 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms HP-UX Installation C hecklist Required Host Software Revisi ons ◆ HP-UX operati ng system revision listed in the EMC Support Matrix on th e Po werlin k websi te ( http://powerlink.
DMP Co nfigurations f or HP -UX 2-47 HP-UX Installation Checklist ◆ Y ou must have pl anned your LUNs and RAID Gr oups, and Storage Groups if you have Access Lo gix. Be sure to consider requir ements for SnapV iew , SAN Copy , M i rro rV iew , and MirrorV iew/A if you have this softwa re.
2-48 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms HP-UX Installation C hecklist DMP Checklist - New HP-UX Ser ver and Ne w Storage Sys tem Complete the task s highlighted with gr ey in the checklist before the service provider arrives.
DMP Checklist - N e w HP-UX Ser ver and New Stor age System 2-49 HP-UX Installation Checklist 6S e r v e r Install Host Agent ❑ Install the Navisp here Host Agent . CX-Serie s Ser v er Software for HP -UX Installation Gui de ❑ Modify user l ogin scr ipts.
2-50 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms HP-UX Installation C hecklist 10 Serv er Make L UNs visi ble ❑ Log in as root an d restar t th e Navisphere Hos t Agent with the following HP-UX comman ds: /sbin/init.d/agen t stop /sbin/init.
DMP Checklist - N e w HP-UX Ser ver and New Stor age System 2-51 HP-UX Installation Checklist 15 Server Ve r i f y D M P installation ❑ Log into V olume Manager St orage Adminis trator (VMSA) VERIT AS V o lume Navisphere Ma nager documentation ❑ Dou ble-cli ck a dis k ic on.
2-52 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms HP-UX Installation C hecklist 16 Server Ve r i f y D M P Operation (con t.
Configur ati ons f or HP-UX Wi thout EMC Failo ver Software 2-53 HP-UX Installation Checklist Configurations f or HP-UX Without EMC F ailo v er Softw are Read this sectio n if you are instal ling an HP- UX configu ration with a new server that will not run EMC fa ilover an d a new sto rage system .
2-54 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms HP-UX Installation C hecklist ◆ Y ou must have pl anned your LUNs and RAID Gr oups, and Storage Groups if you have Access Lo gix. Be sure to consider requir ements for SnapV iew , Mirr o rV iew , and MirrorV iew/A if you have this sof tware.
Without E MC Failov er So ftware Checklist - New HP-UX Ser ver a nd New Storage System 2-55 HP-UX Installation Checklist Without EMC F ailov er Softw are Checklist - New HP-UX Ser ver and Ne w Storage System Complete the task s highlighted with gr ey in the checklist before the service provider arrives.
2-56 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms HP-UX Installation C hecklist 5 Ser ver Inst all Host Agen t ❑ Install the Navis phere Host Agent . CX-Serie s Ser v er Software for HP -UX Installation Gui de ❑ Mod ify user login scr ipts.
Without E MC Failov er So ftware Checklist - New HP-UX Ser ver a nd New Storage System 2-57 HP-UX Installation Checklist 7 Stor age Syst em Set pr operties ❑ Use the following Navisphere CLI command.
2-58 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms HP-UX Installation C hecklist Y ou ar e now r eady to set up any opti onal softwar e, such as SnapV iew or MirrorV i ew , on the storag e system . 11 Serv er Make L UNs availabl e to HP-UX ❑ Prepare the LU Ns to receive data using the Logical V olume Manage r (L VM ).
Linux Insta llation Che cklist 3-1 3 Invisible Body T ag This chapter cont ains checklis ts of the task s require d to instal l a CLARiiON s torage system in a configuration w ith a Linux ® server and PowerPath, VERIT AS DMP , or with no EMC failover softwar e.
3-2 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Linux Instal lation Check list P ow e rP ath Configurations f or Linux Read this sectio n if you are instal ling a Lin ux PowerPath configur ation wi th a new or existing se rver an d a new or e xisting, storag e syste m.
P ower Path Conf igurations f or Linux 3-3 Linux Installation Checklist Required Host Software Revisi ons ◆ Linux operating system r evision and errata listed in the EMC Support M atrix on the Powerli nk website ( http://powerlink.emc.co m ) ◆ HBA driver r evision listed in the EMC Suppor t Matrix on the Powerlink webs ite ( http://powerlink.
3-4 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Linux Instal lation Check list ◆ Y ou must have pl anned your LUNs and RAID Gr oups, and Storage Groups if you have Access Lo gix. Be sure to consider requir ements for SAN Copy , SnapV iew , Mir rorV iew , and MirrorV iew/A if you have this s oftware.
P ower Path Conf igurations f or Linux 3-5 Linux Installation Checklist ◆ PowerPath for Li nux V ersion 4.3.1 I nstallation Guide (P/N 300 -002-247) or PowerPath for Li nux V ersion 4.3 Inst allation Guide (P/N 300 -001-687) or PowerP ath V e rsion 3.
3-6 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Linux Instal lation Check list ◆ EMC CLARiiON CX5 00 2-Gigabi t Disk Pr ocessor Enclosure (DPE2) Setup Gui d e (P/N 300-.
P ow e rP ath Checklist — New Linux Ser ver and New Storage System 3-7 Linux Installation Checklist P o werPath Chec klist — Ne w Linux Ser ver and N e w Storage System Complete the task s highlighted with gr ey in the checklist before the service provider arrives.
3-8 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Linux Instal lation Check list 5S w i t c h e s Inst all For a SAN ❑ Install switches, if not alrea dy installe d. Rails, cabinet, and sw itch documenta tion ❑ Connect a cable from eac h host HBA por t to a switch por t.
P ow e rP ath Checklist — New Linux Ser ver and New Storage System 3-9 Linux Installation Checklist 8S t o r a g e S y s t e m Cable t o swit ch or se r ver an d LAN ❑ Connect the storage system to the s w itch or HBA po rt s. Storage-system setup guide.
3-10 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Linux Instal lation Check list 12 Ser ver Make ta rget SPs ava i la bl e ❑ Add persi stent bindings to the HBA driver confi guration file. Note : Y ou need the WWPN of each SP por t for t he bindings.
P ow e rP ath Checklist — New Linux Ser ver and New Storage System 3-11 Linux Installation Checklist 15 Ser ver Install P o w erP ath ❑ Mount the C D-ROM. P owerP ath release notes and P owerPath f or Linux installation g uide ❑ Install P owerP ath.
3-12 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Linux Instal lation Check list Y ou ar e now r eady to set up any opti onal softwar e, such as SnapV iew or MirrorV i ew , on the storag e system .
P ow erPath Ch eckli st — New Linux Ser ver and Existing Storage System 3-13 Linux Installation Checklist P o werPath Chec klist — Ne w Linux Ser ver and Existing Storage System Complete the task s highlighted with gr ey in the checklist before the service provider arrives.
3-14 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Linux Instal lation Check list 5S t o r a g e S y s t e m Up date soft ware ❑ If currentl y installed storage-syst em software is not at the required minimum revision, update it.
P ow erPath Ch eckli st — New Linux Ser ver and Existing Storage System 3-15 Linux Installation Checklist 7S w i t c h e s Zone For a SAN ❑ Zone the switches to provide a path from each additional HBA por t (host in itiator) to the SPs.
3-16 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Linux Instal lation Check list 9 CX200, CX300, CX400, CX500, CX600, CX700, or F C4700- Seri es Sto rage Sy stem Set prope.
P ow erPath Ch eckli st — New Linux Ser ver and Existing Storage System 3-17 Linux Installation Checklist 10 FC4500 Sto rag e System Set proper ties for Pow e r Pa t h ❑ Connect a c omputer to the se rial por t on the st orage syst em. ❑ Connect a c omputer to the se rial por t on the storage system.
3-18 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Linux Instal lation Check list 11 Serve r Ma ke ta rget S Ps av ailable ❑ Add persistent b indings to the HBA driver configurati on file. Note: Y ou need the WWPN of each SP por t for the bindi ngs.
P ow erPath Ch eckli st — New Linux Ser ver and Existing Storage System 3-19 Linux Installation Checklist 12 Storage Sys tem Conf igure ❑ If the ser ver will use an e x isting Storage Group, use Navisphere Manager to connec t the ser v er to the Storage Group.
3-20 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Linux Instal lation Check list 14 Serve r Install P owerP ath ❑ Mount the CD-ROM. ❑ Mount the CD -ROM. P owerP ath release notes and P owerPath f or Linux installation g uide ❑ Install P owerPath.
P ow erPath Ch eckli st — New Linux Ser ver and Existing Storage System 3-21 Linux Installation Checklist 16 Serve r T est P o werP ath with a l icen se key If you have a P owerP ath license k ey Note If your P owerP ath lic ense key i s not registe red, the load balanc ing policy is res tricted to bas ic failov er .
3-22 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Linux Instal lation Check list Y ou ar e now r eady to set up any opti onal softwar e, such as SnapV iew or MirrorV i ew , on the storag e system . 16 Serve r T est P o werP ath with a l icen se key (cont.
P ow erPath Checklist — Existing Linux S er ver and Ne w Storage Syst em 3-23 Linux Installation Checklist P o werPath Chec klist — Exist ing Linux Ser ver and Ne w Storage System Complete the task s highlighted with gr ey in the checklist before the service provider arrives.
3-24 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Linux Instal lation Check list 6S t o r a g e S y s t e m Cable t o swit ch or se r ver an d LAN ❑ Connect the storage system to the s w itch or HBA po rt s.
P ow erPath Checklist — Existing Linux S er ver and Ne w Storage Syst em 3-25 Linux Installation Checklist 9 Ser ver Cabl e addi ti ona l HB As to switches or stora ge syst em ❑ Cable any additional HBA po rt s to the switch connected t o the storage system or to SP por ts.
3-26 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Linux Instal lation Check list 13 Ser ver Make ta rget SPs ava i la bl e ❑ If you did not re boot the ser ver in step 12, reboot th e ser ver no w .
P ow erPath Checklist — Existing Linux S er ver and Ne w Storage Syst em 3-27 Linux Installation Checklist 16 Ser ver Install P o w erP ath ❑ Mount the C D-ROM. P owerP ath release notes and P owerPath f or Linux installation g uide ❑ Install P owerP ath.
3-28 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Linux Instal lation Check list Y ou ar e now r eady to set up any opti onal softwar e, such as SnapV iew or MirrorV i ew , on the storag e system .
P ower Path Checklist — Existing Linux Ser ver and Existing Storage System 3-29 Linux Installation Checklist P o werPath Chec klist — Existing Linux Ser ve r and Existing St orage System This checklist assumes that the existing Linux server and existing storage system ar e already connected in a SAN or direct attach configuratio n.
3-30 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Linux Instal lation Check list 4 St orage Sy stem Updat e softwar e ❑ If currentl y installed storage-system so ftware is not at the required minimum revision, update it.
P ower Path Checklist — Existing Linux Ser ver and Existing Storage System 3-31 Linux Installation Checklist 5 CX200, CX300, CX400, CX500, CX600, CX700, or F C4700- Seri es Stor age Syst em Set prop erties f or Pow e r P a t h (cont.) For new or replacement HBAs (cont.
3-32 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Linux Instal lation Check list 6 FC450 0 Stor age System Set prop erties f or Pow e r P a t h ❑ Connect a c omputer to the se rial por t on the st orage syst em. ❑ Connect a comp uter to the s erial por t on the storage system.
P ower Path Checklist — Existing Linux Ser ver and Existing Storage System 3-33 Linux Installation Checklist 6 FC450 0 Stor age System Set prop erties f or Pow e r P a t h (cont.) For existing HB As An e x isting HBA is one that i s register ed with the sto rage system.
3-34 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Linux Instal lation Check list 8S e r v e r Cable addi ti onal HB As to swi t ch e s o r stor age sys tem ❑ Cable any additional HBA por t s to the switch connected to the storage syste m or to SP por ts.
P ower Path Checklist — Existing Linux Ser ver and Existing Storage System 3-35 Linux Installation Checklist 11 Server Regis ter additi onal HB As wit h storag e syste m ❑ T o make LUNZs visible to the HBAs, either reload the HBA driver or reboo t the ser ver .
3-36 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Linux Instal lation Check list 14 Server Install P ow erP ath ❑ Mount the CD-ROM. ❑ Mount the CD-ROM. P owerP ath release notes and P owerPath f or Linux installation a nd administ r ator’s guide ❑ Install P owerPath.
P ower Path Checklist — Existing Linux Ser ver and Existing Storage System 3-37 Linux Installation Checklist 15 Server Te s t P o w e r P a t h wit h a license key If you have a P owerP ath license k ey If your P owerPath license ke y is not register ed, the load bal ancing policy i s restr icted to basic failov er .
3-38 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Linux Instal lation Check list 15 Server Te s t P o w e r P a t h wit h a license key (co nt.
DMP Configur atio ns f or Linux 3-39 Linux Installation Checklist DMP Conf igurations f or Linux Read this sectio n if you are instal ling a Linu x VERIT AS DMP config uration with a n ew server and a new storage system.
3-40 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Linux Instal lation Check list ◆ Y ou have a h o st t hat is • Running an operating system that can support the Navispher e Manage r 6.X browser-based client . For an up-to-d ate list of such opera ting systems, refer to th e Navisphere Mana ger 6.
DMP Configur atio ns f or Linux 3-41 Linux Installation Checklist ◆ EMC CX3 00 2-Gigab it Disk Processor Enc losure (DPE) Setup Gu ide (P/N 300-00 1-276, rev A02 or higher) or EMC CLARiiON CX3 00 2-.
3-42 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Linux Instal lation Check list DMP Checklist - New Linux Se r ver and New Storage System T asks hig hlighted w ith grey in th e checklist should be completed befor e th e service pr ov ider arrives.
DMP Checkli st - New Linux Ser ver and New S tor age System 3-43 Linux Installation Checklist 7S w i t c h Connect servers and SPs ❑ V erify that the s ervers and SPs ar e connected t o the s w itch. Documentation that ships with the switches 8S w i t c h Zone s witc hes For a SAN ❑ Zone switches.
3-44 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Linux Instal lation Check list 13 Server Install the CLARiiON DMP driver ❑ Download the CLAR iiON DMP dr iver to the ser ver from Ser vices on the VERIT AS website.
DMP Checkli st - New Linux Ser ver and New S tor age System 3-45 Linux Installation Checklist 18 Server Ve r i f y D M P install ation (con t.) For a VxVM version less th an 3.5 ❑ Log into V olume Man ager Storage Admini strator (VMSA) VERIT AS V olume Manager do cumentation ❑ Double-click a dis k icon.
3-46 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Linux Instal lation Check list Y ou ar e now r eady to set up any opti onal softwar e, such as SnapV iew or MirrorV i ew , on the storag e system .
Configur a tions f or Linux Without EM C Failo ver Softw a re 3-47 Linux Installation Checklist Conf igura tions f or Linux Without E MC Failo v er Softwar e Read this sectio n if you are instal ling a Linu x configuratio n with a new ser ver that will not ru n E MC f ai lov er s oft ware and a ne w s tor age system.
3-48 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Linux Instal lation Check list ◆ Y ou must have pl anned your LUNs and RAID Gr oups, and Storage Groups if you have Access Lo gix. Be sure to consider requir ements for SAN Copy , SnapV iew , and Mirr orV iew if you have this softwar e .
Without EMC Failo ver Softw are Checklist — Ne w Linux Server and New S tor age System 3-49 Linux Installation Checklist Without EMC Failo v er Softw a re Checklist — Ne w Linux Ser ve r and Ne w Storage System Complete the task s highlighted with gr ey in the checklist before the service provider arrives.
3-50 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Linux Instal lation Check list Y ou ar e now r eady to set up any opti onal softwar e, such as SnapV iew or MirrorV i ew , on the storag e system . 5 St orage Sy stem Set up secu rity ❑ F o r Navisphere 6.
NetW are Installatio n Checklists 4-1 4 Invisible Body T ag This chapter cont ains checklis ts of the task s require d to instal l a CLARiiON st orage system in a configuration with a Novell ® NetW are ® server and PowerPath failover softwar e.
4-2 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms NetW are Ins tallation Checklists P ow e rP ath Configurations f or NetW are Read this sectio n if you are instal ling a NetW a re PowerPath configur ation wi th a new or existing se rver an d a new or e xisting storag e syste m.
P owerPath Conf ig urations f o r NetW are 4-3 NetW are I nstallation C hecklists Required Host Software Revisi ons ◆ NetW are operating system r evis ion and kernel listed in the EMC Support M atrix on the Powerli nk website ( http://powerlink.emc.
4-4 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms NetW are Ins tallation Checklists ◆ Y ou must have pl anned your LUNs and RAID Gr oups, and Storage Groups if you have Access Lo gix. Be sure to consider requir ements for SAN Copy , SnapV iew , Mir rorV iew , and MirrorV iew/A if you have this s oftware.
P owerPath Conf ig urations f o r NetW are 4-5 NetW are I nstallation C hecklists ◆ EMC N avisphere Hos t Agent a nd CLI for NetWare V ers ion 6.X Installation Guid e (P/N 069001 1 49) or EMC CX-Se .
4-6 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms NetW are Ins tallation Checklists ◆ EMC Storage Pr ocessor Enclosure (SPE) CX600-Series Se tup and Cabling Gui de (P/N 0.
P ow er Path C hecklist — Ne w NetW are Ser ver and New S torage System 4-7 NetW are I nstallation C hecklists P o werPath Chec klist — New NetW are Ser ver and Ne w Storage System T asks hig hlighted w ith grey in th e checklist should be completed befor e th e service pr ov ider arrives.
4-8 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms NetW are Ins tallation Checklists 6S w i t c h e s Inst all For a SAN ❑ Install switches, if not alrea dy installe d. Rails, cabinet, and sw itch documenta tion ❑ Connect a cable from eac h host HBA por t to a switch por t.
P ow er Path C hecklist — Ne w NetW are Ser ver and New S torage System 4-9 NetW are I nstallation C hecklists 9S t o r a g e S y s t e m Cable t o swit ch or se r ver an d LAN ❑ Connect the storage system to the s w itch or HBA po rt s. Storage-system setup guide.
4-10 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms NetW are Ins tallation Checklists 13 Ser ver Make ta rget SPs ava i la bl e ❑ Scan for LUNs with the following NetW ar .
P ow er Path C hecklist — Ne w NetW are Ser ver and New S torage System 4-11 NetW are I nstallation C hecklists Y ou ar e now r eady to set up any opti onal softwar e, such as SnapV iew or MirrorV i ew , on the storag e system .
4-12 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms NetW are Ins tallation Checklists P o werPath Chec klist — Ne w NetW are Ser v er an d Existing Storage System T asks hig hlighted w ith grey in th e checklist should be completed befor e th e service pr ov ider arrives.
P owerP ath Checklist — New NetW are Ser ver and Existing Storage System 4-13 NetW are I nstallation C hecklists 3 Server Install P ow e rP ath (cont.) CA UTION If you use the server -n s command to br ing up NetW ar e, you mus t eit her load the P owerP ath dr iver manually or remove all redundant paths.
4-14 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms NetW are Ins tallation Checklists 7S e r v e r Cable to swi t ch e s o r stor age sys tem ❑ Cable the HBA por t s to the switch connected to t he storage system or to SP por ts.
P owerP ath Checklist — New NetW are Ser ver and Existing Storage System 4-15 NetW are I nstallation C hecklists 9 St orage Sy stem Regis ter HBAs ❑ On the ser ver , restar t the Navisphere Ho st Agent or run the Navisphere Ser ver Utility .
4-16 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms NetW are Ins tallation Checklists 10 Stor age Syst em Set Pr oper tie s for P owe rPat h (cont.) For an FC4500 st orage system ❑ Connect a c omputer to the se rial por t on the st orage syst em.
P owerP ath Checklist — New NetW are Ser ver and Existing Storage System 4-17 NetW are I nstallation C hecklists 11 Serv er Make ta rget SPs ava il a bl e ❑ Scan for LUNs with the following NetW a.
4-18 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms NetW are Ins tallation Checklists 12 Stor age Syst em Co nfigure (c ont.
P owerP ath Checklist — New NetW are Ser ver and Existing Storage System 4-19 NetW are I nstallation C hecklists 15 Serv er Save P ower Path conf ig urat ion ❑ Sav e the ser v er ’ s P owerP a th configuration wi th the following P owerP ath command: power mt -s ave This command creates the power mt.
4-20 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms NetW are Ins tallation Checklists Y ou ar e now r eady to set up any opti onal softwar e, such as SnapV iew or MirrorV i ew , on the storag e system . 16 Serv er Te s t P o w e r P a t h wit h a license key (co nt.
P owerP ath Checklist — Existing NetW are Ser ver and New Stor ag e System 4-21 NetW are I nstallation C hecklists P o werPath Chec klist — Existing NetW are Ser v er and Ne w Storage System T ask.
4-22 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms NetW are Ins tallation Checklists . Ta s k With Access L ogix Reference Docum ent 1 Server Install additional HB As ❑ If you need additional HBAs to provide more paths to the stor age syst em, install these H BAs.
P owerP ath Checklist — Existing NetW are Ser ver and New Stor ag e System 4-23 NetW are I nstallation C hecklists 6 Server Install P ow erP ath ❑ Make sure the SCSISAN.CDM module is not installed. NetW are doc umentation ❑ If the Navisphere H ost Agent is r unning, unlo ad the Nav agent.
4-24 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms NetW are Ins tallation Checklists 9 St orage Sy stem Cable to sw it c h or se rver and LAN (con t.
P owerP ath Checklist — Existing NetW are Ser ver and New Stor ag e System 4-25 NetW are I nstallation C hecklists 13 Swit ches Zone add itional HB As For a SAN ❑ Zone the switches to provide a path from each ad ditional HBA por t (host initiator) to the SPs.
4-26 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms NetW are Ins tallation Checklists 16 Stor age Syst em Set up Event Monitor ❑ Plan your monitor ing configurati on.
P owerP ath Checklist — Existing NetW are Ser ver and New Stor ag e System 4-27 NetW are I nstallation C hecklists Y ou ar e now r eady to set up any opti onal softwar e, such as SnapV iew or MirrorV i ew , on the storag e system . 20 Serv er Te s t P o w e r P a t h wit h a li cens e key (cont.
4-28 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms NetW are Ins tallation Checklists P o werPath Chec klist — Existing NetW are Se r ver and Existing Storage System This checklist assumes that the existing NetW are server and e x isting storage system ar e already connected in a SAN or direct attach configuratio n.
P ow erPath Checklist — Existing N etW are Ser ver and Existing Storage System 4-29 NetW are I nstallation C hecklists The W ithout Access Logix colu mn doe s not apply t o CX300, CX5 00, and CX700 storage systems because they ship fr om the factory with the Access Logix enabl er instal led.
4-30 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms NetW are Ins tallation Checklists 5 Ser ve r S et HB A drive r para mete rs ❑ Make sure the HBA dr iv e r parameters are set to the values required for CLARiiON and P owerP ath.
P ow erPath Checklist — Existing N etW are Ser ver and Existing Storage System 4-31 NetW are I nstallation C hecklists 7 CX200, CX300, CX400, CX500, CX600, CX700, or F C4700 -Serie s Sto rage Sy stem Se t p rope r t ie s for Pow e r Pa t h (cont.) For new H BAs (cont .
4-32 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms NetW are Ins tallation Checklists 8 FC4500 S torag e System Se t p rope r t ie s for Pow e r Pa t h ❑ Connect a com puter to the ser ial por t on the st orage system. ❑ Connect a c omputer to the serial por t on the s torage system.
P ow erPath Checklist — Existing N etW are Ser ver and Existing Storage System 4-33 NetW are I nstallation C hecklists 8 FC4500 S torag e System Se t p rope r t ie s for Pow e r Pa t h (cont.) For exist ing HBAs An e x isting HBA is one that i s registered with the storag e system.
4-34 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms NetW are Ins tallation Checklists 9S e r v e r Install P owerP ath ❑ Make sure the SCSISAN.CDM module is not i nstalled. ❑ Make sure the SCSISAN.CDM module is not i nstalled.
P ow erPath Checklist — Existing N etW are Ser ver and Existing Storage System 4-35 NetW are I nstallation C hecklists 10 Serve r Cab le additiona l HB As t o sw it ch e s or storag e sys tem ❑ Cable any additional HBA por ts to the sw itch connec ted to the storage system or to S P por ts.
4-36 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms NetW are Ins tallation Checklists 13 Ser v er Make LUNs av ailable to additiona l HB As ❑ Use Navisphere M anager to disconnect an d then reconnect the ser ver and its Storage Group.
P ow erPath Checklist — Existing N etW are Ser ver and Existing Storage System 4-37 NetW are I nstallation C hecklists 15 Serve r Rem ount vo l u m e s If the server is not in a cluster ❑ Remount the volumes on the storage system. If the ser ver is not in a cluster ❑ Remount th e volumes on the storage system.
4-38 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms NetW are Ins tallation Checklists 17 Serve r T est P o werP ath with a license key (cont. ) ❑ Identify the HBA send ing I/O to LUN by viewing the output of the powermt display dev= x every=2 command, and di sconnect the cab le to that HBA.
Solar is Instal lation C hecklists 5-1 5 Invisible Body T ag This chapter cont ains checklis ts of the task s require d to instal l an CLARiiON s ystem in a config uration with a Solaris ™ server an d PowerPath o r VERIT AS DMP failover softw are. The sections for the dif ferent configurations ar e ◆ PowerPath Configurations for Solaris .
5-2 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Solaris Installatio n Checklists P ow e rP ath Configurations f or Solar is Read thi s section if you are instal ling a Sol aris PowerP ath configur ation wi th a new or existing se rver an d a new or e xisting storag e syste m.
P owerPath Configur a tions f or Solar is 5-3 Solaris In stallation Ch ecklists Required Host Software Revisi ons ◆ Solaris operati ng system revision and patch es listed in the EMC Support M atrix on the Powerli nk website ( http://powerlink.
5-4 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Solaris Installatio n Checklists ◆ Y ou must have pl anned your LUNs and RAID Gr oups, and Storage Groups if you have Access Lo gix. Be sure to consider requir ements for SAN Copy , SnapV iew , Mir rorV iew , and MirrorV iew/A if you have this s oftware.
P owerPath Configur a tions f or Solar is 5-5 Solaris In stallation Ch ecklists ◆ PowerP ath V ersi on 4.3 Product Guide (P/N 300- 001-673) or PowerPa th V ersion 4.2 P roduct Gui d e (P/N 300- 001-521) or PowerP ath V ersi on 4.1 Product Guide (P/N 300- 001-290) or PowerP ath V ersi on 4.
5-6 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Solaris Installatio n Checklists ◆ EMC Rails and Enclosures Field In stallation Guide (P/N 300 -001-799) ◆ EMC Rails a.
P owerPath Configur a tions f or Solar is 5-7 Solaris In stallation Ch ecklists ◆ FC450 0 Setup Guid e (P/ N 014003 102, r evision A03 o r higher) ◆ FC4700 -2 Setup Guide (P/N 014003073) ◆ EMC N.
5-8 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Solaris Installatio n Checklists P o werPath Chec klist — New S o lar is Ser ver and Ne w Storage System T asks hig hlighted w ith grey in th e checklist should be completed befor e th e service pr ov ider arrives.
P ow erPath Checklist — Ne w Solar is Server and New Stor ag e System 5-9 Solaris In stallation Ch ecklists 6S w i t c h e s Install For a SAN ❑ Install switches, if not alrea dy installe d. Rails, cabinet, switch documentatio n. ❑ Connect a cable from eac h host HBA por t to a switch por t.
5-10 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Solaris Installatio n Checklists 9 Storage System Cable to switch or ser ver and LAN ❑ Connect the storage system to the s w itch or HBA po rt s. Storage-system setup guide.
P ow erPath Checklist — Ne w Solar is Server and New Stor ag e System 5-11 Solaris In stallation Ch ecklists 13 Server Make target SPs avai la ble ❑ Add persi stent bindings to the HBA driver confi guration file. Solaris utilitie s kit administ r ator’s guide ❑ Edit the /kerne l/drv/sd.
5-12 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Solaris Installatio n Checklists 16 Server Make LUNs avai la ble t o Solaris ❑ Prepare the LU Ns to receive data by •.
P ow erPath Checklist — Ne w Solar is Server and New Stor ag e System 5-13 Solaris In stallation Ch ecklists Y ou ar e now r eady to set up any opt ional softwar e, such as SnapV iew or MirrorV i ew , on the storag e system . 18 Server T est P owerP ath with a lice nse key (cont.
5-14 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Solaris Installatio n Checklists P o werPath Chec klist — New S o lar is Ser ver and Existing S torage System T asks hig hlighted w ith grey in th e checklist should be completed befor e th e service pr ov ider arrives.
P ow er P ath Checklist — N ew Solaris Ser ver and Existing Storage System 5-15 Solaris In stallation Ch ecklists 3 Server Install P owerP at h ❑ Ins tall P ow erP ath.
5-16 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Solaris Installatio n Checklists 7 Server Cable to swit ch es o r storage s ystem ❑ Cable the HBA por ts to the switch connect ed to the storage sy stem or to SP por ts. ❑ Cable the HBA por ts to the s w itch connec ted to the storage sy stem or to SP por ts.
P ow er P ath Checklist — N ew Solaris Ser ver and Existing Storage System 5-17 Solaris In stallation Ch ecklists 8S w i t c h e s Zone For a SAN ❑ Zone the switches to pr ovide a path from eac h .
5-18 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Solaris Installatio n Checklists 10 CX300, CX400, CX500, CX600, CX700, or FC4700-Seri es Storage System Set Propert ies f.
P ow er P ath Checklist — N ew Solaris Ser ver and Existing Storage System 5-19 Solaris In stallation Ch ecklists 11 FC4500 Storag e Sy ste m ❑ Connect a comp uter to the s erial por t on the storage system .
5-20 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Solaris Installatio n Checklists 11 FC4500 Storag e Sy ste m (c on t.) ❑ F r om the computer co nnected to the storage .
P ow er P ath Checklist — N ew Solaris Ser ver and Existing Storage System 5-21 Solaris In stallation Ch ecklists 12 Server Make target SPs av ail ab le (co nt.) ❑ Che ckpoi nt - Use the inquir y option of the fo rm a t command to verify the path s to the storage system.
5-22 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Solaris Installatio n Checklists 14 Server Make LUNs av ail able to Sol ar is ❑ Prepare LUN s to receive data by • Sp.
P ow er P ath Checklist — N ew Solaris Ser ver and Existing Storage System 5-23 Solaris In stallation Ch ecklists 16 Server T est P owerP ath with a license key If you have a P owerPath license key Note If your P owerPath license ke y is not reg istered, the loa d balancing policy is restr icted to bas ic f a ilov e r .
5-24 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Solaris Installatio n Checklists Y ou ar e now r eady to set up any opti onal softwar e, such as SnapV iew or MirrorV i ew , on the storag e system . 16 Server T est P owerP ath with a license key (cont.
P ow er Path Checklist — Existing Solaris Ser ver and Ne w Storage Syst em 5-25 Solaris In stallation Ch ecklists P o werPath Chec klist — Existing Solar is Ser ver and New Storage System T asks h.
5-26 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Solaris Installatio n Checklists Ta s k With Access L ogix Reference Document 1 Server Install additional HB A s ❑ If you need additional HBAs to provi de more paths to the stor age syst em, instal l these HBAs .
P ow er Path Checklist — Existing Solaris Ser ver and Ne w Storage Syst em 5-27 Solaris In stallation Ch ecklists 7S t o r a g e S y s t e m Initialize and install so ftwa re en ablers ❑ Install the Navi sphere Initial ization Uti lity on a host on the same su bnet as the storage-s ystem management p or ts.
5-28 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Solaris Installatio n Checklists 11 Server Cable additional HB A s to switches or storage s ystem ❑ Cable any additional HBA por ts to the s wi tch connected to the storage system or to SP por ts.
P ow er Path Checklist — Existing Solaris Ser ver and Ne w Storage Syst em 5-29 Solaris In stallation Ch ecklists 13 Server Make target SPs available ( cont. ) ❑ Checkpoint - Use N avisphere Manager ’ s Connect ivity Status di alog box to verify that each HBA is r egi stered with t he storage system.
5-30 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Solaris Installatio n Checklists 18 Server T est P owerP ath with a lice nse key If you hav e a Po wer P ath l icense key Note If your Pow e rP ath license key is not registered, the load bal ancing policy is restr icted to basic failover .
P ow er Path Checklist — Existing Solaris Ser ver and Ne w Storage Syst em 5-31 Solaris In stallation Ch ecklists Y ou ar e now r eady to set up any opt ional softwar e, such as SnapV iew or MirrorV i ew , on the storag e system . 20 Server VERIT AS VxVM For a server with VERIT AS VxVM V3.
5-32 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Solaris Installatio n Checklists P o werPath Chec klist — Existing Solaris Ser ver and Existing Storage System This checklist assumes that the existing Solaris server and existing storage system ar e already connected in a SAN or direct attach configuratio n.
P owerPath Checklis t — Existin g Solar is Ser ver and Existing Storage Sy stem 5-33 Solaris In stallation Ch ecklists The W ithout Access Logix colu mn doe s not apply t o CX300, CX5 00, and CX700 storage systems because they ship fr om the factory with the Access Logix enabl er instal led.
5-34 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Solaris Installatio n Checklists 5S t o r a g e S y s t e m Up date soft war e ❑ If currentl y installed storage-syst em software is not at the required minimum revision, update it.
P owerPath Checklis t — Existin g Solar is Ser ver and Existing Storage Sy stem 5-35 Solaris In stallation Ch ecklists 6 CX300, CX400, CX500, CX600, CX700, or FC4700 -Serie s Sto rage Sy stem Set proper ties for P owerP ath (cont.
5-36 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Solaris Installatio n Checklists 7 FC4500 S torag e System Set proper ties for Pow e r Pa t h ❑ Connect a c omputer to the se rial por t on the st orage syst em. ❑ Connect a c omputer to the se rial por t on the storage system.
P owerPath Checklis t — Existin g Solar is Ser ver and Existing Storage Sy stem 5-37 Solaris In stallation Ch ecklists 7 FC4500 S torag e System Set proper ties for P owerP ath (cont.
5-38 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Solaris Installatio n Checklists 7 FC4500 S torag e System Set proper ties for P owerP ath (cont. ) For existing HB As An e x isting HBA is one that i s register ed with the sto rage system.
P owerPath Checklis t — Existin g Solar is Ser ver and Existing Storage Sy stem 5-39 Solaris In stallation Ch ecklists 8 Server Install Po w e r Pa t h ❑ Install P owerPath.
5-40 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Solaris Installatio n Checklists 9 Server Cable additional HB As to swit ch es o r storage s ystem ❑ Cable any additional HBA po r ts to the switch connected to the storage syste m or to SP por ts.
P owerPath Checklis t — Existin g Solar is Ser ver and Existing Storage Sy stem 5-41 Solaris In stallation Ch ecklists 11 Server Make target SPs avail a ble ❑ If you updated the dr iver or added additional HBAs, add persistent bindings to the H BA driver configuration fi le.
5-42 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Solaris Installatio n Checklists 13 Server Configur e P owerP ath fo r missing devices ❑ Use the following P ower Path .
P owerPath Checklis t — Existin g Solar is Ser ver and Existing Storage Sy stem 5-43 Solaris In stallation Ch ecklists 14 Server T est P owerP ath with a license key (cont.) ❑ View the paths to the chosen LUN using the f ol lowing P owerP ath command: powermt display dev= x every=2 where x is a pseudo device that represents the chosen LUN.
5-44 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Solaris Installatio n Checklists 16 Server VERIT AS VxVM For a server wi th VERIT A S VxVM V3.
DMP Con figur a tions for Solaris 5-45 Solaris In stallation Ch ecklists DMP Conf igura tions f or Solar is Read this sectio n if you are instal ling a Sol aris VERIT AS DMP config uration with a n ew server and a new storage system.
5-46 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Solaris Installatio n Checklists ◆ Y ou have a h o st t hat is • Running an operating system that can support the Navispher e Manage r 6.X browser-based client . For an up-to-d ate list of such opera ting systems, refer to th e Navisphere Mana ger 6.
DMP Con figur a tions for Solaris 5-47 Solaris In stallation Ch ecklists ◆ EMC CX3 00 2-Gigab it Disk Processor Enc losure (DPE) Setup Gu ide (P/N 300-00 1-276, rev A02 or higher) or EMC CLARiiON CX.
5-48 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Solaris Installatio n Checklists DMP Checklist - Ne w Solar is Ser ver and Ne w Storage Syste m T asks hig hlighted w ith grey in th e checklist should be completed befor e th e service pr ov ider arrives.
DMP Checklist - New Solaris Server and New Stor age System 5-49 Solaris In stallation Ch ecklists 7S t o r a g e S y s t e m Set arraycommpath mode ❑ Use the following Navisphere CL I command to s e.
5-50 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Solaris Installatio n Checklists 13 Server Install V olume Ma nager and DMP ❑ Use the pkga dd comman d to add V olume Manager and DMP to the ser v er . ❑ Install any rec ommended VERIT AS updates.
DMP Checklist - New Solaris Server and New Stor age System 5-51 Solaris In stallation Ch ecklists 18 Server Ve r i f y D M P installat ion (con t.) ❑ Click the paths tab f or that dev ice. VERIT AS V olume Manager do cumentation ❑ V erify that the de v ice has pr imar y and second ary paths to it.
5-52 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Solaris Installatio n Checklists Y ou ar e now r eady to set up any opti onal softwar e, such as SnapV iew or MirrorV i ew , on the storag e system .
Tru64 UNIX Insta llation C hecklist 6-1 6 Invisible Body T ag This chapter con tains a checkl ist of the tasks requ ired to install a new CLARiiON st orage system in a configuration with a new T ru64 ® UNI X ® server . To p i c s a r e ◆ T ru64 UNIX Configurations .
6-2 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Tru64 UN IX Inst alla tion C hecklis t T r u64 UNIX Conf igurations Read this sectio n if you are instal ling a T r u64 UNIX con figuratio n with a ne w server and a ne w storag e system .
T ru64 UN IX Conf i gurations 6-3 T r u64 UNIX In stallation Chec klist ◆ Y ou must have pl anned your LUNs and RAID Gr oups, and Storage Groups if you have Access Lo gix. Be sure to consider requir ements for SAN Copy , SnapV iew , Mir rorV iew , and MirrorV iew/A if you have this softwa r e .
6-4 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Tru64 UN IX Inst alla tion C hecklis t Chec klist - Ne w T r u64 UNIX Ser ver and Ne w Storage System With out Boot Disk This checkli st is for a new storage system th at will not contai n a T r u64 UNIX boot disk.
Checklist - New T r u64 UNIX Ser ver and New Storage System W ithout Boot Disk 6-5 T r u64 UNIX In stallation Chec klist Y ou ar e now r eady to set up any opti onal softwar e, such as SnapV iew or MirrorV i ew , on the storag e system .
6-6 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Tru64 UN IX Inst alla tion C hecklis t Checklist - Ne w T r u64 UNIX Ser ver and New Storage System With Boot Dis k This ch ecklist i s for a new st orage s y stem t hat w ill cont ain a T ru64 UNIX boo t disk.
Checklist - Ne w Tru64 UNIX Ser ver and New Stor ag e System With Boot Disk 6-7 T r u64 UNIX In stallation Chec klist 3S w i t c h e s Zone single path t o SP ❑ Zone the switches to provide a si ngle path from one HBA (host initia tor) to default SP o wner o f the boot disk LUN in the s torage system.
6-8 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Tru64 UN IX Inst alla tion C hecklis t 6 Ser ver Prep are SRM Cons ol e for Boot LU N ❑ At the SRM console, ex ecute t he init comman d.
Checklist - Ne w Tru64 UNIX Ser ver and New Stor ag e System With Boot Disk 6-9 T r u64 UNIX In stallation Chec klist 10 Ser ver Upda te SRM C ons ole for Boot LUN ❑ At the SRM console, ex ecute t he init comman d.
6-10 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Tru64 UN IX Inst alla tion C hecklis t Y ou ar e now r eady to set up any opti onal softwar e, such as SnapV iew or MirrorV i ew , on the storag e system .
Windows Ins tallation Checklists 7-1 7 Invisible Body T ag This chapter cont ains checklis ts of the task s require d to instal l an CLARiiON sy stem in a configurat ion with a W in dows® server and PowerPath o r VERIT AS DMP failover softw are. CX-Series refers to a ll the CX s t orage syst em s, except f or the CX200LC.
7-2 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Windows Installation Checklists P ow e rP ath Configurations f or Windo ws Read this sectio n if you are instal ling a W indows Server 2003 or W indows 2 000 Powe rPath co nfiguratio n with a new or existi ng server and a new or exis ti ng storage system.
P ow erPath Configur a tions f or Windows 7-3 Windows Installation Che cklists Required Host Software Revisi ons ◆ W indow s Server 2003 or W indows 200 0 operating syst em revision and any service pack listed in the EM C Supp ort M atr ix on the Powerlink we bsite ( http://p owerl ink.
7-4 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Windows Installation Checklists Prereq uisites ◆ Y ou must have a host th at is • Running an operating system that can support the Navispher e Manage r 6.X browser-based client .
P ow erPath Configur a tions f or Windows 7-5 Windows Installation Che cklists Documentation Each checklist refers to some or al l of the documents lis ted below . W e recommend that you lo ad these documents o n your service laptop. ◆ Documenta tion that ships wi th the HBA or NIC and HBA or NIC driver .
7-6 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Windows Installation Checklists ◆ EMC Rails and Enclosures Field In stallation Guide (P/N 300 -001-799) ◆ EMC Rails an.
P ow erPath Checklist — Ne w Wind ows S er ver and New Stor ag e System 7-7 Windows Installation Che cklists P o werPath Chec klist — New W indows Ser ver and N e w Storage System T asks hig hlighted w ith grey in th e checklist should be completed befor e th e service pr ov ider arrives.
7-8 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Windows Installation Checklists 5 Server Inst all Host Ag ent or Server Utility ❑ Install the N avisphere Host Age nt or Navisphere Ser ver Utility and the Navisphere CLI.
P ow erPath Checklist — Ne w Wind ows S er ver and New Stor ag e System 7-9 Windows Installation Che cklists 10 S torag e Syst em Initialize and inst all soft ware enab ler s ❑ Install the N avisphere Initializati on Utility on a host on the same subnet as the storage- system managemen t por ts.
7-10 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Windows Installation Checklists 13 Se r ver With CX500i Sto rage Syst em Conf igur e ser ver iSCSI initiator ports For NI Cs ❑ Use Microsoft i SCSI Software Initiator o n the ser ver to confi gure the iSCSI initi ators for each NIC po r t.
P ow erPath Checklist — Ne w Wind ows S er ver and New Stor ag e System 7-11 Windows Installation Che cklists 19 S torag e Syst em Conf ig ur e ❑ Use Navisphe re Manager to s et general storag e-system pro per ties.
7-12 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Windows Installation Checklists 22 S erve r With CX500i Sto rage Syst em Conf ig ure optio nal CHAP secur ity If you configured CHAP s ecurity for the storage system , you must c onfigure it for the ser ver’ s iSCSI ini tiators.
P ow erPath Checklist — Ne w Wind ows S er ver and New Stor ag e System 7-13 Windows Installation Che cklists Y ou ar e now r eady to set up any opt ional softwar e, such as SnapV iew or MirrorV i ew , on the storag e system . 25 Ser ver T est PowerPath with a lic ense key (co nt.
7-14 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Windows Installation Checklists P o werPath Chec klist — Ne w Windo ws Ser ve r and Existing Storage System W ithout Boot Disk This checklist is for an existing storag e system that will not contain a W indow s Server 2003 or W indows 2000 b oot disk.
P owerP ath Ch eckli st — New W indows Server and Existing Storage System Without Boot Disk 7-15 Windows Installation Che cklists 3 Server Set HB A driv er proper t ies ❑ Set the HBA dri ver parameters to the values required f or CLARii ON.
7-16 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Windows Installation Checklists 6 Server Install admsnap and/ or admh ost ❑ If the ser ver will be a Sn apView production or secondar y hos t, install the ad msnap utility .
P owerP ath Ch eckli st — New W indows Server and Existing Storage System Without Boot Disk 7-17 Windows Installation Che cklists 9S e r v e r Cab le to Fibre Channel swi t ch e s, netw ork, or stor age- syste m data por t s ( cont .
7-18 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Windows Installation Checklists 11 Fibr e Channe l Switches Zone add itional pat hs For a Fibre Channe l SAN ❑ Zone the Fibre C hannel switches to provide a path from each HBA por t (host in itiator) to the appropri ate SPs.
P owerP ath Ch eckli st — New W indows Server and Existing Storage System Without Boot Disk 7-19 Windows Installation Che cklists 13 CX-Seri es or FC 4700-S eries Stor age Syst em Set prop erties f .
7-20 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Windows Installation Checklists 14 FC4500 S tor age System Set prop erties f or Pow e r P a t h ❑ Connect a c omputer to the se rial por t on the st orage syst em.
P owerP ath Ch eckli st — New W indows Server and Existing Storage System Without Boot Disk 7-21 Windows Installation Che cklists 16 Stor age Syst em Co nfigure ❑ If the ser ver will use an e x isting Storage Group, use Navisphere Manager to connect the ser ver to the Storage Group.
7-22 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Windows Installation Checklists 16 Stor age Syst em Co nfigure (c ont.) For an FC4500 st orage system ❑ Disconnec t the computer fr om the serial por t on the s torage syste m.
P owerP ath Ch eckli st — New W indows Server and Existing Storage System Without Boot Disk 7-23 Windows Installation Che cklists 19 Server Mak e LUN s ava il a bl e to Windows ❑ Prepare a ny new LUNs to rec eive data by creating par ti tions on them.
7-24 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Windows Installation Checklists Y ou ar e now r eady to set up any opti onal softwar e, such as SnapV iew or MirrorV i ew , on the storag e system . 21 Server Te s t P o w e r P a t h wit h a license key (co nt.
P ow er P at h Checklist — New Windows Ser v er and Existing Storage System With Boot Disk 7-25 Windows Installation Che cklists P o werPath Chec klist — Ne w Windo ws Ser ve r and Existing Storage System With Boot Disk This checklist is for an existing storag e system that will con tain a W indow s Server 2003 or W i ndo ws 2000 boot disk .
7-26 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Windows Installation Checklists 4 Server Cab le to Fibre Channel swi t ch e s, netw ork, or stor age- syste m dat a po r .
P ow er P at h Checklist — New Windows Ser v er and Existing Storage System With Boot Disk 7-27 Windows Installation Che cklists 4 Server Cab le to Fibre Channel swi t ch e s, netw ork, or stor age- syste m data por t s ( cont .
7-28 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Windows Installation Checklists 5 St orage Sy stem Co nfigure (c ont.) ❑ Reboot the ser ver so Windows Ser v e r 2003 or Windows 2000 recognizes the L UNs. Now the LUNs i n the Storage Group look like any other disks in the ser ver .
P ow er P at h Checklist — New Windows Ser v er and Existing Storage System With Boot Disk 7-29 Windows Installation Che cklists 12 Server Set HB A driv er proper t ies ❑ Reinstall H BA driver . ❑ Reinstall HBA dr iver . HBA documentation (see URL on 7-5) ❑ Set the HBA dri ver parameters to the values required f or CLARii ON.
7-30 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Windows Installation Checklists 13 Stor age Syst em Set prop erties f or Pow e r P a t h (cont.) For an FC4500 st orage system ❑ Connect a c omputer to the se rial por t on the st orage syst em.
P ow er P at h Checklist — New Windows Ser v er and Existing Storage System With Boot Disk 7-31 Windows Installation Che cklists 14 Server Install P ow erP ath ❑ Install P owerPath.
7-32 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Windows Installation Checklists 15 Fibr e Channe l Switches Zone addi ti ona l pa ths (con t.
P ow er P at h Checklist — New Windows Ser v er and Existing Storage System With Boot Disk 7-33 Windows Installation Che cklists 16 Server (d irec t attach only) Cable addi ti onal pat hs ❑ For a direct attach confi guration, cable any additional H BA por ts to SP por ts.
7-34 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Windows Installation Checklists 19 Serv er Install admsnap and/ or admh ost ❑ If the ser ver will be a Sn apView production or secondar y hos t, install the ad msnap utility .
P ow er P at h Checklist — New Windows Ser v er and Existing Storage System With Boot Disk 7-35 Windows Installation Che cklists 23 Server Te s t P o w e r P a t h wit h a license key If you have a P owerP ath license k ey If your P owerPath license ke y is not register ed, the load bal ancing policy i s restr icted to basic failov er .
7-36 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Windows Installation Checklists Y ou ar e now r eady to set up any opti onal softwar e, such as SnapV iew or MirrorV i ew , on the storag e system . 23 Server Te s t P o w e r P a t h wit h a license key (co nt.
P ow er Path C hecklist — Existing Windo ws Ser ver and New Stor ag e System 7-37 Windows Installation Che cklists P o werPath Chec klist — Existing Windo ws Ser ver and Ne w Storage System T asks.
7-38 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Windows Installation Checklists Ta s k With Access L ogix Reference Docum ent 1 Server Remove A TF or CDE ❑ If A TF or .
P ow er Path C hecklist — Existing Windo ws Ser ver and New Stor ag e System 7-39 Windows Installation Che cklists 5 Server Install P ow erP ath ❑ Install P owerPath. P owerP ath release notes and P owerPath f or Windows installation and administ rator’ s guide ❑ Reboot the ser v er to complete the installati on of P owerPath.
7-40 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Windows Installation Checklists 9 CX300, C X500, or CX700 S torag e System Cable to d ata ports to Fibr e Channel s witch.
P ow er Path C hecklist — Existing Windo ws Ser ver and New Stor ag e System 7-41 Windows Installation Che cklists 14 Stor age Syst em Set Pr oper ties for Pow e r P a t h ❑ Use the following Navi.
7-42 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Windows Installation Checklists 17 Stor age Syst em Co nfigure ❑ Use Navisphere Manag er to se t general storage-s ystem proper ties.
P ow er Path C hecklist — Existing Windo ws Ser ver and New Stor ag e System 7-43 Windows Installation Che cklists 20 Server Wit h CX500i Stor age System Co nfigure optional CHAP secu rity for new iSCSI HBA or NIC initiators For iSCSI HBA Initiators ❑ Use QLog ic SANsurfer to configure initiator CHAP on the HBA ini tiators.
7-44 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Windows Installation Checklists Y ou ar e now r eady to set up any opti onal softwar e, such as SnapV iew or MirrorV i ew , on the storag e system . 22 Serv er Te s t P o w e r P a t h wit h a li cens e key (cont.
P ow e rP ath Checklist — Existing Windows Ser ver and Existing Storage System 7-45 Windows Installation Che cklists P o werPath Chec klist — Existing Windo ws Ser ver and E xisting Storage System.
7-46 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Windows Installation Checklists The W ithout Access Logix colu mn does not apply to CX300, CX5 00, CX500i , and CX700 stor age systems b eca use they s h ip from the factory with the Access L ogix enabler installed.
P ow e rP ath Checklist — Existing Windows Ser ver and Existing Storage System 7-47 Windows Installation Che cklists 5 Server with CX500i stor age syste m For a dditio nal N ICs ❑ Download and instal l Microsoft iSCSI Software Initiator.
7-48 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Windows Installation Checklists 7 CX-Series or FC 4700-S eries Stor age Syst em Set prop erties f or Pow e r P a t h For .
P ow e rP ath Checklist — Existing Windows Ser ver and Existing Storage System 7-49 Windows Installation Che cklists 7 CX-Series or FC 4700-S eries Stor age Syst em Set prop erties f or Pow e r P a t h (cont.) For existing HB As An e x isting HBA is one that i s register ed with the sto rage system.
7-50 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Windows Installation Checklists 8 FC450 0 Stor age System Set prop erties f or Pow e r P a t h (cont.
P ow e rP ath Checklist — Existing Windows Ser ver and Existing Storage System 7-51 Windows Installation Che cklists 9S e r v e r Install P ow erP ath ❑ Install P owerPath.
7-52 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Windows Installation Checklists 10 Server Cable addi ti onal HB As to r NICs to Fi bre Cha nnel swi t ch e s, netw ork, o.
P ow e rP ath Checklist — Existing Windows Ser ver and Existing Storage System 7-53 Windows Installation Che cklists 10 Server Cable addi ti onal HB As to r NICs to Fi bre Cha nnel swi t ch e s, netw ork, or stor age- syste m data por t s ( cont .
7-54 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Windows Installation Checklists 14 CX500i St orag e System Co nfigure opti on al stor age- syste m CHAP secur ity If CHAP secur ity is co nfigured for the storage-system SP por t con nected to a new NIC or HBA initi ator , the new initiator must use CHAP .
P ow e rP ath Checklist — Existing Windows Ser ver and Existing Storage System 7-55 Windows Installation Che cklists 16 Server Mak e LUN s ava il a bl e to additi onal HB As ❑ Use Navisphere Manager to disconnect a nd then reconne ct the ser ver and its Storage Grou p .
7-56 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Windows Installation Checklists 17 Server Te s t P o w e r P a t h wit h a license key (co nt.) ❑ View the output of the pow ermt display dev= x every=2 command, and verif y that • The state of the uncabled path(s) become s “dead.
DMP Con f igurations for Windows 7-57 Windows Installation Che cklists DMP Conf igura tions f or Window s Read t his sec tion if you ar e inst alling a W indows 2 000 VERIT AS DMP config uration with a n ew server and a new storage system.
7-58 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Windows Installation Checklists Prereq uisites ◆ A ll switches mus t be installed.
DMP Con f igurations for Windows 7-59 Windows Installation Che cklists Documentation Each checklist refers to some or al l of the documents lis ted below . W e recommend that you lo ad these documents on yo ur service laptop before starting the instal lation.
7-60 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Windows Installation Checklists DMP Checklist — New W indows Ser ver and Ne w Storage System T asks hig hlighted w ith grey in th e checklist should be completed befor e th e service pr ov ider arrives.
DMP Checklist — New Windo w s Server and New S torage Sys tem 7-61 Windows Installation Che cklists 6S w i t c h Zone s witc hes fo r o n e p a th fr om se rver to storage sy stem For a SAN ❑ Zone switches so that only one pat h e x ists between a ser ver and the storage system.
7-62 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Windows Installation Checklists 12 Swi tch Zone s witc hes ad diti onal p aths fr om se rver to storage sy stem For a SAN ❑ Zone switches so that all desir ed paths exists between a ser ver and the storage system.
DMP Checklist — New Windo w s Server and New S torage Sys tem 7-63 Windows Installation Che cklists Y ou ar e now r eady to set up any opti onal softwar e, such as SnapV iew or MirrorV i ew , on the storag e system .
7-64 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Windows Installation Checklists Using Windows DMP When you use W indo ws 2000 DMP for CLARiiON , you need to take into account the f ollowing beha viors for LUNs under DMP managem ent: ◆ After W indows 2000 r eboots, one SP owns all the LUNs.
Custom er Suppor t A-1 A nvisible Body T ag This appendix reviews the EMC process for detectin g and resolving software problems, and provides essenti al questions tha t you shoul d answer before co ntacting the EMC Customer Support Center . This appendix covers the f ollowing topics: ◆ Overview of Detecting and Resolving Pro bl ems .
A-2 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Customer Support Ov er view o f Detecting and Resolving P r oblems EMC software pr oducts are s up ported dir ectly by the EMC Customer Support Center in the United States .
Tr oublesho oting the Problem A-3 Customer Su pport T ro ubleshooting the Proble m Please perform the r e levant diagnostic steps befor e you contact the EMC Customer Support Center: 1. Read the d ocu ment ation caref ully . 2. Reconstruct the events leading up to th e pr oblem and describe them in writin g.
A-4 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Customer Support Bef ore Calling the Customer Suppor t Center Have the follo wing inf ormation a vailable before calling t.
Docu menting the P roblem A-5 Customer Su pport Documenting the Pr oblem If the EMC Customer S upport Center req ues ts information r eg arding the problem, please document it com pletely , making sur.
A-6 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Customer Support Reporting a New Pr oblem For a new problem, please provide the following i nformation: ❑ Release level .
Sending P roblem Docume ntation A-7 Customer Su pport Sending Problem Documentatio n Use on e of the fo llowing m ethods to s end do cumenta tion o f the problem to the EMC Cus tomer Support Center: ◆ E-mail ◆ FT P ◆ U.
A-8 EMC Installa tion Ro admap for CX-Ser ies and FC-Ser ies Storage Syste ms Customer Support.
デバイスEMC 69001166の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
EMC 69001166をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはEMC 69001166の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。EMC 69001166の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。EMC 69001166で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
EMC 69001166を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はEMC 69001166の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、EMC 69001166に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちEMC 69001166デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
