Emersonメーカー3412の使用説明書/サービス説明書
ページ先へ移動 of 144
Installati on Manual Part Number 3-9000-759R evision D June 2014 Dani el TM 3410 Series Gas Ultrasonic Flo w Meters 3414 Gas Ultrasonic Flo w Met er 3411 and 3412 Gas Ultrasonic Flo w Meters.
.
Da n i el c us to m er s er v i ce E-m a i l • Custo mer S er vi ce: tech .ser vice @emer son pro cess. com • Cust omer Support: daniel.cst.support@emerson.c om • Asia -Pacific: danielap .support@ eme rson.com • Eur ope: Dan iel EMA . C ST @Em er son Pr ocess .
Sign al w ords and symbols Pay speci al atten tion to the following sign al words, sa fe t y alert symbols and stateme nts : Impor tant Impor tant is a stat eme nt the u ser needs to know and conside r . Tip Tip provides information or suggestions fo r improved e fficie ncy or best results.
Impor t ant sa fe t y instruc tions Daniel Me asure ment and Control, Inc. (Danie l) designs, manu factures and tests products to func tion within specific conditions.
Product O peration P ersonnel: • T o prev en t pe rsonal inj ur y , personnel m ust f ollo w all instructions of this m anu al prior to and during operation of the pro duct . • Follow all warnings, cautions, and notices m arked on, and supplied with, this produc t.
No tic e THE CONTENT S OF THIS PUBLICA TION ARE PRE SENTED FOR INF ORMA TIONAL PURPOSES ONL Y , AND WHILE EVERY EFF ORT HAS BEEN MADE T O EN SURE THEIR ACCURA CY , THEY ARE NO T T O BE C ON STR UED AS W ARRANTIES OR GU ARANTEES, EXPRESSED OR IM PLIED, RE GARDING THE PR ODUC TS OR SERVICES DESCRIBED HEREIN OR THEIR U SE OR APPLICABILIT Y .
W arrant y and Limit ations 1. LIMITED W ARRANT Y : Sub ject to the limitatio ns con tained in Section 2 he re in, D aniel Mea sure men t & Control, Inc.
Daniel Series 341 0 Gas Ultrasonic Meter Insta llation Manual PrefaceTable of Contents 3-9000-759 Rev D June 2014 Section 1: Introduction i Co nte nts Preface Danie l cu stomer ser vic e Signal w ords and symbols Impor tant saf ety instruc tions Notic e W arranty and Limit ations Section 1: Introduction 1.
ii Section 3: Electrical installation PrefaceTable of Contents Daniel Series 341 0 Gas Ultrason ic Mete r Installation Manual June 2014 3-9000-759 Rev D Section 3: Electrical installation 3.1 Cable length TTL mode .....................................
Daniel Series 341 0 Gas Ultrasonic Meter Insta llation Manual PrefaceTable of Contents 3-9000-759 Rev D June 2014 Section 4: Configuration iii Appendix A: Engineering drawings A.1 3410 Series engineering drawin gs . ........... .............. ........
iv Section 4: Configuration PrefaceTable of Contents Daniel Series 341 0 Gas Ultrason ic Mete r Installation Manual June 2014 3-9000-759 Rev D.
Daniel 3410 Series Ultrasonic Gas Flow Meter Installation Ma nual List of Tables 3-9000-759 Rev D June 2014 List of Tables v List o f T ables T able 1-1 Daniel 3410 Series Gas Ultrasonic Meter acronyms, abbreviations and definitions ............ 3 T able 1-3 Performance specification s .
vi List o f Tables List of Tables Daniel 3410 Series Ultras onic Gas Flow Meter Installation Manual June 2014 3-9000-759 Rev D.
Daniel 3410 Series Gas Ultrasonic Mete r Installation Manual List of Figures 3-9000-759 Rev D June 2014 List of Figures vii List of Figure s Figure 1-1 Daniel Meter Link download and registration .... ............ .............. .............. .......
List of Figures Daniel 3410 Series Gas Ultrasonic Meter Installat ion Manual June 2014 3-9000-759 Rev D viii List of Figures Figure 3-1 2 Base Enclosure wire seal installation 68 Figure 3-1 3 Base Enc.
Daniel 3410 Series Ultrasonic Gas Flow Mete r Installation Manual Section 1: Introduction 3-9000-759 Rev D June 2014 Typical applications 1 11 Sec tion 1: Introduc tion Daniel 3410 Series Ultra sonic Gas Flow Mete rs hav e various c onfigurations that meet a broad ran ge of cust omer re qui rement s.
2 Features and benefits Section 1: Introduction Daniel 3410 Series Ul trasonic Gas Flow Mete r Installation Manual June 2014 3-9000-759 Rev D 1.2 F eatures and benefits • Prov en long te rm stabilit.
Daniel 3410 Series Ultrasonic Gas Flow Mete r Installation Manual Section 1: Introduction 3-9000-759 Rev D June 2014 Acronyms, abbreviati ons and definitions 3 1.
4 Acronyms, abbreviat ions and definitions Section 1: Introduction Daniel 3410 Series Ul trasonic Gas Flow Mete r Installation Manual June 2014 3-9000-759 Rev D IS Int rin sic all y Safe K Ke lvin (te.
Daniel 3410 Series Ultrasonic Gas Flow Mete r Installation Manual Section 1: Introduction 3-9000-759 Rev D June 2014 Acronyms, abbreviati ons and definitions 5 s second (time unit, metric) SDRA M Synch ronous Dyna mic Rand om Access Memor y sec second (time unit, U.
6 Daniel MeterLink software Section 1: Introduction Daniel 3410 Series Ul trasonic Gas Flow Mete r Installation Manual June 2014 3-9000-759 Rev D 1.4 Daniel MeterLink sof t wa re Daniel Met erLink TM .
Daniel 3410 Series Ultrasonic Gas Flow Mete r Installation Manual Section 1: Introduction 3-9000-759 Rev D June 2014 Daniel 3410 Series meter design 7 Procedure 1. F rom the right p anel under Qui ck Links, c lick the MeterLink R egistration and Download link.
8 Daniel 3410 Series meter design Section 1: Introduction Daniel 3410 Series Ul trasonic Gas Flow Mete r Installation Manual June 2014 3-9000-759 Rev D Computer simulations o f various veloc it y profiles demonstrate that multiple mea suremen t paths provide an optimum solution for mea suring asymmetric flow.
Daniel 3410 Series Ultrasonic Gas Flow Mete r Installation Manual Section 1: Introduction 3-9000-759 Rev D June 2014 Daniel 3410 Series meter design 9 Danie l 3412 Gas Ultrasonic Flow met ers utilize .
10 Daniel 3410 Series meter design Section 1: Introduction Daniel 3410 Series Ul trasonic Gas Flow Mete r Installation Manual June 2014 3-9000-759 Rev D Danie l 3411 Gas Ultrasonic Flow meters are sin.
Daniel 3410 Series Ultrasonic Gas Flow Mete r Installation Manual Section 1: Introduction 3-9000-759 Rev D June 2014 Daniel 3410 Series meter design 11 All Daniel ultrasonic flow meter’s U.
12 Meter specifications Section 1: Introduction Daniel 3410 Series Ul trasonic Gas Flow Mete r Installation Manual June 2014 3-9000-759 Rev D 1.6 M eter specifications Consult your Daniel Sales and Se r vice re presen tative to ensure yo u purchase the correct compone nts and se als f or yo ur application.
Daniel 3410 Series Ultrasonic Gas Flow Mete r Installation Manual Section 1: Introduction 3-9000-759 Rev D June 2014 Meter specifications 13 Specifica tions for D aniel 3410 Se ries Ga s Ultrasonic Fl.
14 Meter specifications Section 1: Introduction Daniel 3410 Series Ul trasonic Gas Flow Mete r Installation Manual June 2014 3-9000-759 Rev D Met er Pe rforma nce Flange t ypes ANSI c lasse s - 300, 600, 900 and 1500 (per ANSI B16.5) Specific Gravity 0.
Daniel 3410 Series Ultrasonic Gas Flow Mete r Installation Manual Section 1: Introduction 3-9000-759 Rev D June 2014 Meter specifications 15 Electr onic specifications (Continu ed) T ransducer , mounts and holders Not e: The proc ess tempe rature mu st not exc eed the operating te mperature range o f the transduce rs.
16 Meter specifications Section 1: Introduction Daniel 3410 Series Ul trasonic Gas Flow Mete r Installation Manual June 2014 3-9000-759 Rev D Communications specifications Connectivit y protocols One .
Daniel 3410 Series Ultrasonic Gas Flow Mete r Installation Manual Section 1: Introduction 3-9000-759 Rev D June 2014 Meter specifications 17 Digital, analo g, and frequency outputs Fr eq u en c y / Di g it al Output(s) The mete r ha s user -configurable selections for e ither a frequency output or digital status (FODO) (Also see Sectio n 3.
18 Pre-installation considerations Section 1: Introduction Daniel 3410 Series Ul trasonic Gas Flow Mete r Installation Manual June 2014 3-9000-759 Rev D 1.7 Pre -installation considerations • Pipeline equipme nt c ode compli ance , AN SI, ASME, etc.
Daniel 3410 Series Ultrasonic Gas Flow Mete r Installation Manual Section 1: Introduction 3-9000-759 Rev D June 2014 Safety 19 Danie l 3410 Serie s Liquid Ultra sonic Mete rs are INMETRO ce rtified. Ref e r to the 3410 Se ries Liquid Ultrasonic Flo w Mete r T ag, IN METRO Certification drawing DMC - 006224.
20 Daniel 3410 Series Certifications and Approvals Section 1: Introduction Daniel 3410 Series Ul trasonic Gas Flow Mete r Installation Manual June 2014 3-9000-759 Rev D 1.
Daniel 3410 Series Ultrasonic Gas Flow Mete r Installation Manual Section 1: Introduction 3-9000-759 Rev D June 2014 FCC compliance 21 1.10 FCC compliance This equipme nt h as bee n te sted and f ound to c omply with the limits f or a Cl as s A digital devic e , pu r s u an t to P ar t 15 of t h e F CC Ru l es .
22 References Section 1: Introduction Daniel 3410 Series Ul trasonic Gas Flow Mete r Installation Manual June 2014 3-9000-759 Rev D 1.11 R eferenc es [1] Goul d Modb us P rotoc ol R efere nc e Guide , Rev .
Daniel 3410 Series Ultrasonic Gas Flow Meter Installation Manual Section 2: Mechanical installation 3-9000-759 Rev D June 2014 Meter piping, lifting and mounting 23 Sec tion 2: Mech anical inst alla tion 2.
24 Meter piping, lifting and mounting Section 2: Mec hanical installation Daniel 3410 Series Ul trasonic Gas Flow Meter Instal lation Manual June 2014 3-9000-759 Rev D Consult your Daniel Sales and Se r vice re presen tative to ensure yo u purchase the correct compone nts and se als f or yo ur application.
Daniel 3410 Series Ultrasonic Gas Flow Meter Installation Manual Section 2: Mechanical installation 3-9000-759 Rev D June 2014 Meter components 25 2.2 M eter comp onents Danie l 3410 Serie s Ga s Ultrasonic Flo w Mete rs are a ssembled , con figured and tested a t the factor y .
26 Meter components Section 2: Mec hanical installation Daniel 3410 Series Ul trasonic Gas Flow Meter Instal lation Manual June 2014 3-9000-759 Rev D The 3414 four pa th ultrasonic me te r compone nts are sho wn below .
Daniel 3410 Series Ultrasonic Gas Flow Meter Installation Manual Section 2: Mechanical installation 3-9000-759 Rev D June 2014 Meter components 27 The 3412 dual p ath ultra sonic mete r c ompone nts are s hown be low . Figure 2-2 Daniel 3412 Flow Mete r assembly A.
28 Meter components Section 2: Mec hanical installation Daniel 3410 Series Ul trasonic Gas Flow Meter Instal lation Manual June 2014 3-9000-759 Rev D The 3411 single path ultra sonic mete r compone nts ar e shown belo w .
Daniel 3410 Series Ultrasonic Gas Flow Meter Installation Manual Section 2: Mechanical installation 3-9000-759 Rev D June 2014 Piping recommendations 29 2.
30 Piping recommendations Section 2: Mec hanical installation Daniel 3410 Series Ul trasonic Gas Flow Meter Instal lation Manual June 2014 3-9000-759 Rev D Flow conditioning is recommended for best me.
Daniel 3410 Series Ultrasonic Gas Flow Meter Installation Manual Section 2: Mechanical installation 3-9000-759 Rev D June 2014 Piping recommendations 31 Figure 2-6 Piping recommendations Un i-direc ti.
32 Piping recommendations Section 2: Mec hanical installation Daniel 3410 Series Ul trasonic Gas Flow Meter Instal lation Manual June 2014 3-9000-759 Rev D • Daniel 3410 Series Ultrasonic Ga s Flow .
Daniel 3410 Series Ultrasonic Gas Flow Meter Installation Manual Section 2: Mechanical installation 3-9000-759 Rev D June 2014 Meter safety for hoist rings and lifting slings 33 2.
34 Use of appropriate safety engineered swivel hoist rings in meter end fla nges Section 2: Mec hanical installation Daniel 3410 Series Ul trasonic Gas Flow Meter Instal lation Manual June 2014 3-9000-759 Rev D When li f ting a D anie l Ultra sonic Mete r b y itse lf , D anie l recomme nds two methods.
Daniel 3410 Series Ultrasonic Gas Flow Meter Installation Manual Section 2: Mechanical installation 3-9000-759 Rev D June 2014 Use of appropriate safety engineered sw ivel hoist rings in meter end fla.
36 Use of appropriate safety engineered swivel hoist rings in meter end fla nges Section 2: Mec hanical installation Daniel 3410 Series Ul trasonic Gas Flow Meter Instal lation Manual June 2014 3-9000-759 Rev D 6. After installation of the hoist rings, always check tha t the ring rotat es and pivo ts freely in all direc tions.
Daniel 3410 Series Ultrasonic Gas Flow Meter Installation Manual Section 2: Mechanical installation 3-9000-759 Rev D June 2014 Use of appropriate safety engineered sw ivel hoist rings in meter end flange s 37 9. NEVER allow the slings to contact the electronics enclosure .
38 Use of appropriate safety engineered swivel hoist rings in meter end fla nges Section 2: Mec hanical installation Daniel 3410 Series Ul trasonic Gas Flow Meter Instal lation Manual June 2014 3-9000-759 Rev D 12. NE VER lif t more than the ult ras onic meter asse mbly including elect ronics and transducers with the hoist rings.
Daniel 3410 Series Ultrasonic Gas Flow Meter Installation Manual Section 2: Mechanical installation 3-9000-759 Rev D June 2014 Use of appropriate safety engineered sw ivel hoist rings in meter end fla.
40 Appropriately rated lifti ng slings Section 2: Mec hanical installation Daniel 3410 Series Ul trasonic Gas Flow Meter Instal lation Manual June 2014 3-9000-759 Rev D 2.
Daniel 3410 Series Ultrasonic Gas Flow Meter Installation Manual Section 2: Mechanical installation 3-9000-759 Rev D June 2014 Appropriately rated lifting slings 41 4. Visually ins pect the slings prior to use f or an y signs of abra sion or othe r dama ge .
42 Mounting requirements in heated or cooled pipelines Section 2: Mec hanical installation Daniel 3410 Series Ul trasonic Gas Flow Meter Instal lation Manual June 2014 3-9000-759 Rev D 2.
Daniel 3410 Series Ultrasonic Gas Flow Meter Inst allation Manual Section 3: Electrical installation 3-9000-759 Rev D June 2014 Cable length TTL mode 43 Sec tion 3: Elec trical installa tion 3.1 Cable length T TL mode The maximum cable length is 2000 f eet when the Digital Output “T TL” mode is selec ted.
44 GROUNDING METER ELECTRONICS HOUSING Section 3: Electrical instal lation Daniel 3410 Seri es Ultrasonic Gas Flow Meter Installation Manual June 2014 3-9000-759 Rev D 3.3 Grounding meter electronics housin g The mete r e lectronics should be inte rna lly grounded f or intrinsical ly saf e opera tions.
Daniel 3410 Series Ultrasonic Gas Flow Meter Inst allation Manual Section 3: Electrical installation 3-9000-759 Rev D June 2014 Conduit seals 45 Figure 3-2 External gro und lug 3.4 Conduit seals Conduit seals are required for mete r installations in hazar dous en vironments.
46 STARTUP FOR SYSTEMS USING EXPLOSION-PROOF CON DUIT Section 3: Electrical instal lation Daniel 3410 Seri es Ultrasonic Gas Flow Meter Installation Manual June 2014 3-9000-759 Rev D 3.4.1 S tar tup for syste ms u sing explosion-proof c onduit 1. Assemble conduit to the T ransmitter Elec tronics Enclosure.
Daniel 3410 Series Ultrasonic Gas Flow Meter Inst allation Manual Section 3: Electrical installation 3-9000-759 Rev D June 2014 Startup for systems using explosion-proof conduit 47 5. Complete the fie ld c onnect ion wiring an d apply electrical power to the system.
48 STARTUP FOR SYSTEMS USING EXPLOSION-PROOF CON DUIT Section 3: Electrical instal lation Daniel 3410 Seri es Ultrasonic Gas Flow Meter Installation Manual June 2014 3-9000-759 Rev D Figure 3-4 T ransmitter elec tronics field wiring l ow er terminal bl ock F.
Daniel 3410 Series Ultrasonic Gas Flow Meter Inst allation Manual Section 3: Electrical installation 3-9000-759 Rev D June 2014 Startup for systems using explosion-proof conduit 49 6. Set or c onfigure the met er ope rating parame ters u sing Danie l Met erLink .
50 STARTUP FOR SYSTEMS THAT USE FLAME-PROOF CABLE Section 3: Electrical instal lation Daniel 3410 Seri es Ultrasonic Gas Flow Meter Installation Manual June 2014 3-9000-759 Rev D 3.4.2 S tar tup for syst e ms tha t u se fl ame-proo f cable 1. Check to m ak e ce rt ain th at all fie ld wiring po we r is turned OFF .
Daniel 3410 Series Ultrasonic Gas Flow Meter Inst allation Manual Section 3: Electrical installation 3-9000-759 Rev D June 2014 Wiring and I/O 51 3.5 Wiring and I/O Daniel Met erLink u ses the T CP/IP protoc ol to communicate with the Danie l 3410 Series Ultrasonic G as Flo w Mete r electronics instead o f Modbus ASCII or RTU .
52 CPU MODULE LABELING AND LED INDICATORS Section 3: Electrical instal lation Daniel 3410 Seri es Ultrasonic Gas Flow Meter Installation Manual June 2014 3-9000-759 Rev D 3.
Daniel 3410 Series Ultrasonic Gas Flow Meter Inst allation Manual Section 3: Electrical installation 3-9000-759 Rev D June 2014 CPU Module labeling and LED indicators 53 T able 3-2 CPU Module labeling and LED functions CPU Module label or LED F unction Swit ch position indicator or LED WRITE PRO T .
54 CPU MODULE LABELING AND LED INDICATORS Section 3: Electrical instal lation Daniel 3410 Seri es Ultrasonic Gas Flow Meter Installation Manual June 2014 3-9000-759 Rev D Ethernet communications The Ethernet port IP address, subnet ma sk, and ga tewa y addre ss are so f t ware-c onfigurab le.
Daniel 3410 Series Ultrasonic Gas Flow Meter Inst allation Manual Section 3: Electrical installation 3-9000-759 Rev D June 2014 CPU Module labeling and LED indicators 55 Modbus T CP If the meter firmware supports Modbus T CP slav e f unctionality , the f ollowin g con trols will be availab le.
56 CPU MODULE LABELING AND LED INDICATORS Section 3: Electrical instal lation Daniel 3410 Seri es Ultrasonic Gas Flow Meter Installation Manual June 2014 3-9000-759 Rev D Serial connections Use a s eri al cable , D aniel P/N 3-2500-401, to c o nnec t to a PC running Danie l Mete rLink.
Daniel 3410 Series Ultrasonic Gas Flow Meter Inst allation Manual Section 3: Electrical installation 3-9000-759 Rev D June 2014 I/O connections 57 Figure 3-6 PC to mete r serial connection wiring 3.6 I/O connec tions The Daniel 3410 Series Ga s Ultrasonic Flow Mete r provides the I/O connections on t he CPU Module .
58 I/O CONNECTIONS Section 3: Electrical instal lation Daniel 3410 Seri es Ultrasonic Gas Flow Meter Installation Manual June 2014 3-9000-759 Rev D Figure 3-7 CPU Module I/O connections A. B. C. D. A. Frequency/Digital Output 2 B. F requency/Digital Output 3 C.
Daniel 3410 Series Ultrasonic Gas Flow Meter Inst allation Manual Section 3: Electrical installation 3-9000-759 Rev D June 2014 Frequency/Digital outputs 59 3.6.1 F requenc y/Digital outputs The meter h as three use r -c onfigurable selections for configuring eithe r a Freque nc y output or Digital output (FODO).
60 FREQUENCY/DIGITAL OUTPUTS Section 3: Electrical instal lation Daniel 3410 Seri es Ultrasonic Gas Flow Meter Installation Manual June 2014 3-9000-759 Rev D F requency or Digit al Outputs (FODO 3) so.
Daniel 3410 Series Ultrasonic Gas Flow Meter Inst allation Manual Section 3: Electrical installation 3-9000-759 Rev D June 2014 Frequency/Digital outputs 61 Maximum frequenc y for the frequency output.
62 ANALOG INPUT SETTINGS Section 3: Electrical instal lation Daniel 3410 Seri es Ultrasonic Gas Flow Meter Installation Manual June 2014 3-9000-759 Rev D Output for FODO1 and Digital Output1 (Group 1 on the CPU Mo dule) share a co mmon ground and hav e 50V isol ation.
Daniel 3410 Series Ultrasonic Gas Flow Meter Inst allation Manual Section 3: Electrical installation 3-9000-759 Rev D June 2014 Analog output settings 63 3.
64 CONFIGURATION PROTECT S WITCH SETTINGS Section 3: Electrical instal lation Daniel 3410 Seri es Ultrasonic Gas Flow Meter Installation Manual June 2014 3-9000-759 Rev D 3.6.6 Con figura tion pro tect switch se tting s The meter’s c onfiguration parameters and firmwa re can be protected against ch anges vi a the CPU Module WR ITE PRO T .
Daniel 3410 Series Ultrasonic Gas Flow Meter Inst allation Manual Section 3: Electrical installation 3-9000-759 Rev D June 2014 External power source connection and fuse 65 3.
66 SECURITY SEAL INSTALLATION Section 3: Electrical instal lation Daniel 3410 Seri es Ultrasonic Gas Flow Meter Installation Manual June 2014 3-9000-759 Rev D 3.7 Securit y seal installation Securit y seals pro tect the integrit y of the mete r metrology and prev en t tampering with transduc er a sse mblies.
Daniel 3410 Series Ultrasonic Gas Flow Meter Inst allation Manual Section 3: Electrical installation 3-9000-759 Rev D June 2014 Seal Transmitter Electronics Enclosure 67 2. Install the security seal wire into and th rough one o f the t wo holes in the end cap .
68 BASE ENCLO SURE SECUR ITY SEALS Section 3: Electrical instal lation Daniel 3410 Seri es Ultrasonic Gas Flow Meter Installation Manual June 2014 3-9000-759 Rev D 3.7.2 Ba se Enclo sure Securit y Seals Use the following instructions to in stall the securi ty seal wire on the Base Enclosure .
Daniel 3410 Series Ultrasonic Gas Flow Meter Inst allation Manual Section 3: Electrical installation 3-9000-759 Rev D June 2014 Base Enclosure Security Seals 69 3. Feed the security wire bene ath the T ransm itter Electron ics Enclosure and through the adjac e nt sock et he ad screw .
70 TRANSDUCER ASSEMBLY SECURITY SE ALS Section 3: Electrical instal lation Daniel 3410 Seri es Ultrasonic Gas Flow Meter Installation Manual June 2014 3-9000-759 Rev D 3.7.3 T ransduce r a sse mbly securit y seals Use t he fo llowing i nstructions and Figure 3-14 to install the securit y seal wire on the t ransduce r asse mbly .
Daniel 3410 Series Ultrasonic Gas Flow Meter Inst allation Manual Section 3: Electrical installation 3-9000-759 Rev D June 2014 Sealing the unit 71 3.7.4 Se aling the unit The unit should be prope rly se aled with a se al ing compound af ter e lec trical connect ions hav e been te sted acc ording t o the cu stome r's Best Practices schedule .
72 SEALING THE UNIT Section 3: Electrical instal lation Daniel 3410 Seri es Ultrasonic Gas Flow Meter Installation Manual June 2014 3-9000-759 Rev D.
Daniel 3410 Series Ultrasonic Gas Flow Meter Installation Manual Sect ion 4: Configuration 3-9000-759 Rev D June 2014 Daniel MeterLink Setup 73 Sec tion 4: Configura tion Af ter the mechanical and ele.
74 Field Setup Wizard Section 4: Configuration Daniel 3410 Seri es Ul trasonic Gas Flow Mete r Installation Manual June 2014 3-9000-759 Rev D 4.2 Field Setup Wizard 1.
Daniel 3410 Series Ultrasonic Gas Flow Meter Installation Manual Sect ion 4: Configuration 3-9000-759 Rev D June 2014 Field Setup Wizard 75 8. The Meter Corrections page allows you to configure the fl.
76 Field Setup Wizard Section 4: Configuration Daniel 3410 Seri es Ul trasonic Gas Flow Mete r Installation Manual June 2014 3-9000-759 Rev D 11. Con figure the prope rties neces sar y f or the A GA8 calcul ations.
Daniel 3410 Series Ultrasonic Gas Flow Meter Installation Manual Sect ion 4: Configuration 3-9000-759 Rev D June 2014 Field Setup Wizard 77 Display Items : The Local Displ ay’s labels and descrip ti.
78 Field Setup Wizard Section 4: Configuration Daniel 3410 Seri es Ul trasonic Gas Flow Mete r Installation Manual June 2014 3-9000-759 Rev D TD YVL — Curre nt d ays f or ward c orrected volume • .
Daniel 3410 Series Ultrasonic Gas Flow Meter Installation Manual Sect ion 4: Configuration 3-9000-759 Rev D June 2014 Field Setup Wizard 79 Note : W hen co nne c ted to a meter wi th t he local display option, rev e rse flow direc tion is indicated with a minus sign (negative) bef ore the value(s) shown on the local dis pla y .
80 Using AMS Device Manager to configure the meter Section 4: Configuration Daniel 3410 Seri es Ul trasonic Gas Flow Mete r Installation Manual June 2014 3-9000-759 Rev D Scroll delay: The Scroll D el ay is the time interval for the selec ted displa y items to be shown on the Local Displ ay .
Daniel 3410 Series Ultrasonic Gas Flow Meter Installation Manual Sect ion 4: Configuration 3-9000-759 Rev D June 2014 Using AMS Device Mana ger to configure the meter 81 Procedure - instal ling AMS Device Description 1. Us e the link abov e to se arch f or the Devic e Des cription (DD) for y our D aniel 3810 Se ries Liquid Ultrasonic Flow Meter .
82 Using AMS Device Manager to configure the meter Section 4: Configuration Daniel 3410 Seri es Ul trasonic Gas Flow Mete r Installation Manual June 2014 3-9000-759 Rev D 10. Click the Daniel Industries Liquid 3810 Serie s Rev 1 hyperlink. The file download dialog displays.
Daniel 3410 Series Ultrasonic Gas Flow Meter Installation Manual Sect ion 4: Configuration 3-9000-759 Rev D June 2014 Using AMS Device Mana ger to configure the meter 83 17. Click the Configure t ab, and then se lec t Guided Setup , Manual Setup or Alert S etup .
84 Using AMS Device Manager to configure the meter Section 4: Configuration Daniel 3410 Seri es Ul trasonic Gas Flow Mete r Installation Manual June 2014 3-9000-759 Rev D AMS Devic e Manager - Guided Setup The Guided setup wizard pro vides con figuration paramete r setting s for the me ter .
Daniel 3410 Series Ultrasonic Gas Flow Meter Installation Manual Sect ion 4: Configuration 3-9000-759 Rev D June 2014 Using AMS Device Mana ger to configure the meter 85 4. Af ter all of the data sh own b elow is entered, cl ick Apply to wri te th e par ameter s to t he mete r .
86 Using AMS Device Manager to configure the meter Section 4: Configuration Daniel 3410 Seri es Ul trasonic Gas Flow Mete r Installation Manual June 2014 3-9000-759 Rev D d. Click the All Va riables tab to view a graphical display of the Pr imar y , Secondar y , Third and F ourth Vari ables.
Daniel 3410 Series Ultrasonic Gas Flow Meter Installation Manual Sect ion 4: Configuration 3-9000-759 Rev D June 2014 Using AMS Device Mana ger to configure the meter 87 AMS Device Manager - Manual Setup Use t he Manual Setup wiz ard to configu re t he m eter’s param eters.
88 Using AMS Device Manager to configure the meter Section 4: Configuration Daniel 3410 Seri es Ul trasonic Gas Flow Mete r Installation Manual June 2014 3-9000-759 Rev D 6. Click the Fr eq u e n c y / D i gi t a l Outputs t ab . Follow the configuration instruc tions in the AMS De vice M anage r - Guided Se tup , Step 4a .
Daniel 3410 Series Ultrasonic Gas Flow Meter Installation Manual Sect ion 4: Configuration 3-9000-759 Rev D June 2014 Using AMS Device Mana ger to configure the meter 89 b .
90 Using AMS Device Manager to configure the meter Section 4: Configuration Daniel 3410 Seri es Ul trasonic Gas Flow Mete r Installation Manual June 2014 3-9000-759 Rev D 12. Click the Alert Setu p tab (from the main Configuration page). Figure 4-13 Configure Flow Analysis Alert 13.
Daniel 3410 Series Ultrasonic Gas Flow Meter Installation Manual Sect ion 4: Configuration 3-9000-759 Rev D June 2014 Using AMS Device Mana ger to configure the meter 91 14. Click the Service T ools t ab to ac ce ss th e d ev ic e a le r t s, va r iab le s, t ren ds a nd ma int ena nc e statuses or to edit the configura tion parameters.
92 Using AMS Device Manager to configure the meter Section 4: Configuration Daniel 3410 Seri es Ul trasonic Gas Flow Mete r Installation Manual June 2014 3-9000-759 Rev D c. Click the Ser vice T ools|V ariables tab. The V ariables pag e displays tabs for th e device ’s Flow D ata, Path Inform ation, Flow T otals, and All V ariables).
Daniel 3410 Series Ultrasonic Gas Flow Meter Installation Manual Sect ion 4: Configuration 3-9000-759 Rev D June 2014 Using AMS Device Mana ger to configure the meter 93 g. Click Service T ools|Variable s|All V ariables tab to view Prim ar y , Secondar y , Third and Fo ur th V ariable para met er stat us.
94 Using AMS Device Manager to configure the meter Section 4: Configuration Daniel 3410 Seri es Ul trasonic Gas Flow Mete r Installation Manual June 2014 3-9000-759 Rev D h. Click the Ser vice T ools|T rends tab t o display the devic e variable s (uncorrected volume flow rat e , pressure and te mpera ture) trends.
Daniel 3410 Series Ultrasonic Gas Flow Meter Installation Manual Sect ion 4: Configuration 3-9000-759 Rev D June 2014 Using a Field Communicator t o configure the meter 95 4.
96 Using a Field Communicator to configure the meter Section 4: Configuration Daniel 3410 Seri es Ul trasonic Gas Flow Mete r Installation Manual June 2014 3-9000-759 Rev D Procedure 1. R emov e electrical power to the meter . If in stalled, remove the endcap security lat ches and seals and the n, remo ve the e ndcap .
Daniel 3410 Series Ultrasonic Gas Flow Meter Installation Manual Sect ion 4: Configuration 3-9000-759 Rev D June 2014 Using a Field Communicator t o configure the meter 97 5. Wire Anal og Input 1 (AI1) and An alog Output 1 (AO1) a s shown in Fi gure 4 -20 and Appendix A , drawing DMC -005324.
98 Security seals for the meter (optional) Section 4: Configuration Daniel 3410 Seri es Ul trasonic Gas Flow Mete r Installation Manual June 2014 3-9000-759 Rev D 4.
Daniel 3410 Series Ultrasonic Gas Flow Me ter Installati on Manual Engineering drawings 3-9000-759 Rev D June 2014 3410 Series engineering drawings 99 APPENDIX APAGE 498 Appe ndix A: Enginee r ing dra wing s A .
100 3410 Series engineering drawings Engineering drawings Daniel 3 410 Series Ultrasonic Gas Flow Meter Instal lation Manual June 2014 3-9000-759 Rev D.
.
.
.
.
Daniel 3410 Series Ultrasonic Gas Flow Mete r Installation Manual Open source licenses 3-9000-759 Rev D June 2014 101 A Appe ndix B: Ope n sourc e lic e nses Sourc e code f or ex ecutable file s or librarie s inclu ded in this product is provided pe r the indicat ed lice nse in the table be lo w .
102 GNU General Public License Open source licenses Daniel 3410 Series Ultrasonic Ga s Flow Meter Installation Manual June 2014 3-9000-759 Rev D Follo w the link be low t o the Danie l® Liqui d Ultra sonic Products GPL we bpage f or additi onal open sourc e info rmation and zipped source c ode files.
Daniel 3410 Series Ultrasonic Gas Flow Mete r Installation Manual Open source licenses 3-9000-759 Rev D June 2014 GNU General Public License 103 The GNU General Public License (GPL) Version 2, June 1991 Copyright (C) 1 989, 1991 Free Softwar e Foundation, Inc.
104 GNU General Public License Open source licenses Daniel 3410 Series Ultrasonic Ga s Flow Meter Installation Manual June 2014 3-9000-759 Rev D For example, if you distribute copies of such a program, whether gratis o r f o r a f e e , y o u m u s t g i v e t h e recipients all the rights that you have.
Daniel 3410 Series Ultrasonic Gas Flow Mete r Installation Manual Open source licenses 3-9000-759 Rev D June 2014 GNU General Public License 105 TERMS AND CONDITIONS FO R COPYING, DISTRI BUTION AND MODIFICATIO N 0 .
106 GNU General Public License Open source licenses Daniel 3410 Series Ultrasonic Ga s Flow Meter Installation Manual June 2014 3-9000-759 Rev D 2 . You may modify your copy or copie s of the Progra m.
Daniel 3410 Series Ultrasonic Gas Flow Mete r Installation Manual Open source licenses 3-9000-759 Rev D June 2014 GNU General Public License 107 In addition, mere aggregation of another work not based.
108 GNU General Public License Open source licenses Daniel 3410 Series Ultrasonic Ga s Flow Meter Installation Manual June 2014 3-9000-759 Rev D If distribution of executab le or object code i s made .
Daniel 3410 Series Ultrasonic Gas Flow Mete r Installation Manual Open source licenses 3-9000-759 Rev D June 2014 GNU General Public License 109 Program by all those who rec eive copies directly or indirectly throu gh you, then the only way you could satisfy both it and this Lice nse would be to refrain entirely from dist ribution of the Program.
110 GNU General Public License Open source licenses Daniel 3410 Series Ultrasonic Ga s Flow Meter Installation Manual June 2014 3-9000-759 Rev D conditions either of tha t version or of any later vers ion published by the Free Soft ware Foundation.
Daniel 3410 Series Ultrasonic Gas Flow Mete r Installation Manual Open source licenses 3-9000-759 Rev D June 2014 GNU General Public License 111 How to Apply These Terms to Your New Programs If you de.
112 GNU General Public License Open source licenses Daniel 3410 Series Ultrasonic Ga s Flow Meter Installation Manual June 2014 3-9000-759 Rev D The hypothetical commands `show w' and `show c' sh ould show the appropriate parts of the General Public License.
Daniel 3410 Series Ultrasonic Gas Flow Mete r Installation Manual Open source licenses 3-9000-759 Rev D June 2014 GNU Lesser General Public License 113 B.2 G NU Lesser General Public Lic ense GNU LESSE R GENERAL PUBLIC LIC ENSE V ersion 3, 29 June 2007 Copyright © 2007 Free Softwa re Foundat ion, Inc.
114 GNU Lesser General Public License Open source licenses Daniel 3410 Series Ultrasonic Ga s Flow Meter Installation Manual June 2014 3-9000-759 Rev D The "Corresponding Application Code" f.
Daniel 3410 Series Ultrasonic Gas Flow Mete r Installation Manual Open source licenses 3-9000-759 Rev D June 2014 GNU Lesser General Public License 115 4.
116 GNU Lesser General Public License Open source licenses Daniel 3410 Series Ultrasonic Ga s Flow Meter Installation Manual June 2014 3-9000-759 Rev D 5.
Daniel 3410 Series Ultrasonic Gas Flow Mete r Installation Manual Open source licenses 3-9000-759 Rev D June 2014 BSD Open Source License 117 B.3 BSD Ope n Source Lic ense For mor e details abou t the Ope n Sourc e TM BSD li ce nse or t he Open Sour ce In itia tive , f ollow the link be low: http://www .
118 M.I.T License Open source licenses Daniel 3410 Series Ultrasonic Ga s Flow Meter Installation Manual June 2014 3-9000-759 Rev D B.4 M. I.T L ic ense For mor e details abo ut the Ope n Sourc e TM MIT license or the Open Source Initia tive follow the link below: http://www .
Daniel 3410 Series Ultrasonic Gas Flow Mete r Installation Manual Open source licenses 3-9000-759 Rev D June 2014 M.I.T License 119.
120 Zlib License Open source licenses Daniel 3410 Series Ultrasonic Ga s Flow Meter Installation Manual June 2014 3-9000-759 Rev D B.5 Z lib L ic ense Copyright (C) 1995-2005 Jean-loup Gailly and Mark Adler This soft ware is pr ov id ed 'as-is', with out a ny expr ess or implied warranty .
Daniel 3410 Series Ultrasonic Gas Fl ow Meter Installa tion Manual Index 3-9000-759 Rev D June 2014 Manual In dex 121 Appe ndix C: Index C .1 Manual Index A American Dril l Bushing Company ................................. 38 AMS Device Manager - Manual Setup .
122 Manual Index Index Daniel 3410 Series Ultrasonic Gas Flow Meter In stallation Manual June 2014 3-9000 -759 Rev D Lifting sl ings .................................................... ............ 34 Safety precautions using swivel hoist rings .....
.
P/N 3-9000-759 Rev D 2014 Daniel Measuremen t and Control, Inc . 11100 Brittmoore Park Drive Houston, TX 77041 USA T+1 713-467-6000 F+1 713-827-4805 USA Toll Free 1 888-356-9001 Daniel Measuremen t Services, Inc. T +1 713-827-6413 www.Daniel.com This product is a core c omponent of the P lantWeb digital plant archi tecture.
デバイスEmerson 3412の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Emerson 3412をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはEmerson 3412の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Emerson 3412の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Emerson 3412で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Emerson 3412を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はEmerson 3412の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Emerson 3412に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちEmerson 3412デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。