EmersonメーカーRTM-ATCA-7350の使用説明書/サービス説明書
ページ先へ移動 of 52
R TM-A TCA-7350 Installation and Use 6806800H30F F ebr uar y 2010.
© 2010 Emerson All rights reser ved. T rademarks Emerson, Business-Critical Continuity , Emerson Network P ower and the Emerson Network P ower logo are trademarks and ser vice marks of Emerson Electr ic Co . © 2010 Emerson Electr ic Co . All other trademar ks are the proper ty of their resp ective o w ners.
RTM-ATCA-7350 Installati on and Use (6806800H30F) 3 About this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 1 Introduction . . . . . . . . . . . . . . . .
RTM-ATCA-7350 Installation and Use (6806800H30F) Contents 4 2.8.3 Connecting Optical Fibe rs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 3 Controls, LEDs and Connec tors . . . . . . . . . . . . . . .
RTM-ATCA-7350 Installati on and Use (6806800H30F) 5 T able 1-1 Mechanical Spe cifications o f RTM-A TCA-7350 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 T able 1-2 Standard Co mpliances . . . . . . . . . . . . . . . . . . . . . . . .
RTM-ATCA-7350 Installation and Use (6806800H30F) List of Tables 6.
RTM-ATCA-7350 Installati on and Use (6806800H30F) 7 Figure 2-1 Wearing the ESD-Pr e ventive Wrist Strap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Figure 2-2 Remov ing the Filler Blade . . . . . . . . . . . . . . . . . . .
RTM-ATCA-7350 Installation and Use (6806800H30F) List of Figures 8.
RTM-ATCA-7350 Installati on and Use (6806800H30F) 9 About this Manual Overview of Contents This manua l is intended f or the users who install and configure the R TM-A TCA-73 50 of the server bl ade.
RTM-ATCA-7350 Installation and Use (6806800H30F) About this Manual 10 Con ventions The f ollowing tab le descr ibes the conv entions used throughout this manual.
About this Manual RTM-ATCA-7350 Installati on and Use (6806800H30F) 11 Summary of Chang es This manual has been revised and replaces all pr ior editio ns. ... Repeated item for example node 1, node 2, ..., node 12 . . . Omission of information from e xample/command that is not necessar y at the time being .
RTM-ATCA-7350 Installation and Use (6806800H30F) About this Manual 12 Comments and Suggestions W e welcome and appreciate y our comments on our docu mentation. W e want t o know what you think about ou r manuals and ho w we can mak e them better . Mail comments to us by filling out the f ollowing online fo r m: http://www .
1 RTM-ATCA-7350 Installati on and Use (6806800H30F) 13 Introduction 1.1 Overview of R TM-A TCA-7350 The A TCA-7350 Rear T ransition Module (RTM) of the ser ver b lad e (hereinaft er referred to as R TM-A TCA-7350) must w o rk with the ser ver b lade A TCA-7350 .
RTM-ATCA-7350 Installati on and Use (6806 800H30F ) Introduction Standa rd Compliances 14 1.3 Standar d Compliances The product is designed to mee t the f ollowing standards . 1.4 Or dering Information When orde ring b oard variants or board accessor ies, use th e order numb ers given on the f ollowing pages.
Board Accessories Introd uction RTM-ATCA-7350 Installati on and Use (6806800H30F) 15 1.4.2 Boar d Accessories As of the printing date of this man ual, the f ollowing board accessories were a vailab le.
RTM-ATCA-7350 Installati on and Use (6806 800H30F ) Introduction Board Accessories 16.
2 RTM-ATCA-7350 Installati on and Use (6806800H30F) 17 Hardw are Preparation and Installation 2.1 Overview This chapter descr ibes: z Unpacking and inspec ting RTM-A TCA-7350 z Precautions during the .
RTM-ATCA-7350 Installati on and Use (6806 800H30F ) Hardware Preparation and In stallation Environmental and Power Requirements 18 3. Remov e the desiccant bag shipped toget her with the blade and dispose of it according to y our countr y’ s legislation.
Power Requirements Hardware Prepar ation and Installation RTM-ATCA-7350 Installati on and Use (6806800H30F) 19 2.3.2 P o wer Requirements 2.4 Module Installation and Remo val F ree Fa ll 1,200 mm (P a ckaged) /all edges and cor ners 1.
RTM-ATCA-7350 Installati on and Use (6806 800H30F ) Hardware Preparation an d Installation Ejector Handles 20 Note the f ollowing points at the time of installing R TM-A TCA-7350: z Mak e sure that y ou wear an electrostatic discharge (ESD)-pre vent iv e wrist strap to pre v ent the static electricity from hur ting you or damaging the de vice.
Installation Preparations Hardwa re Pr eparation an d Installation RTM-ATCA-7350 Installati on and Use (6806800H30F) 21 z Install the de vice at once after y ou take it out of the antistatic packag e. If y ou need to la y down th e de vice, place it bac k in the antistatic pac kage.
RTM-ATCA-7350 Installati on and Use (6806 800H30F ) Hardware Preparation and In stallation Wearing the ESD-Preventive Wrist Strap 22 T o wea r the ESD-pre ventiv e wrist strap , proceed as follo ws: 1. Wrap the ESD-pre v entive wrist strap around y our wrist, as shown in the figure below .
Removing Filler Blades Hardware Preparation and Installation RTM-ATCA-7350 Installati on and Use (6806800H30F) 23 2.5.2 Remo ving Filler Blades If the slot is occupied with a filler b lade you hav e to remov e it first. T o remov e the filler b lade, proceed as f ollows: 1.
RTM-ATCA-7350 Installati on and Use (6806 800H30F ) Hardware Preparation and In stallation In stalling and Replacing Daughter Cards 24 2.6 Installing and Replacing Daughter Car ds 2.
Preparations Hardware Preparation and Installation RTM-ATCA-7350 Installati on and Use (6806800H30F) 25 z Ensure that y our slee ves are tighte ned or rolled up abov e the elbo w . For saf ety purpose, it is not recommended to w ear jewelry , watch, glasses with metal fr ame, or clothes with metal but tons.
RTM-ATCA-7350 Installati on and Use (6806 800H30F ) Hardware Preparation and In stallation GE Daughte r Card 26 2.6.3.1 Installation Positions When the GE daughte r card is used with the R TM-A TCA-7350 it can be installed on the daughter card connect o r J1, J2.
GE Daughter Card Har dware Prepara tion and Instal lation RTM-ATCA-7350 Installati on and Use (6806800H30F) 27 3. As shown in step 1 of the figure belo w , inser t two plastic suppor ts vertically in the holes used to f asten the GE daughter card.
RTM-ATCA-7350 Installati on and Use (6806 800H30F ) Hardware Preparation and In stallation FC Daughter Card 28 After installation, check if R TM-A TCA-7350 can be powe red on and work nor mally . Use the network cab le to connect R TM-A TCA-7350 to the e xter nal network.
FC Daughter Card Hardware Preparation and Installation RTM-ATCA-7350 Installati on and Use (6806800H30F) 29 2.6.4.2 Installing the FC Daughter Card T o install the FC daughter card, proceed as f ollows. 1. W ear the ESD-prev entiv e wr ist strap . For more inf ormation refer , W earing the ESD- Pre ventiv e Wr ist Strap on page 21 .
RTM-ATCA-7350 Installati on and Use (6806 800H30F ) Hardware Preparation and In stallation In stalling and Removi ng the RTM-ATCA-7350 30 5. Place the remov ed FC daughter card in an ant istatic package . 6. T ake the ne w FC daughter card out of the antistatic pac kage.
Installing RTM-ATCA-7350 Hardware Preparation an d Installation RTM-ATCA-7350 Installati on and Use (6806800H30F) 31 The blue LED blinks in dicating that the shelf manager is inf or med about the desire of the b lade to power do wn the paylo ad of the front b lade and the power-do wn process is ongoing.
RTM-ATCA-7350 Installati on and Use (6806 800H30F ) Hardware Preparation and Inst allation Removing RTM-ATCA-7350 32 10. Inser t the main b lade. F or instr uctions on how to install the main b lade, ref er to Section 2.7.1.1 Installing the A TCA-7350 in a P owe red Shelf in A TCA-7350 Installation and Use manual.
Connecting External Cables Hardware Preparation and Installation RTM-ATCA-7350 Installati on and Use (6806800H30F) 33 6. As shown in step 3 of the figure belo w , remov e R TM-A TCA-7350 along the guide rai ls. 7. Place R TM-A TCA-7350 in the antistatic package .
RTM-ATCA-7350 Installati on and Use (6806 800H30F ) Hardware Preparation and Inst allation Connecting KVM Cables 34 2.8.1 Connecting KVM Cab les The figure belo w shows the method of connecting the K eyboard, Video , Mouse (KVM) cable s to R TM-A TCA-7350 when connecting PS/2 compatib le ke yboard and mouse using a PS/2-USB conv er ter .
Connecting Network Cables Hardware Preparation and Installat ion RTM-ATCA-7350 Installati on and Use (6806800H30F) 35 2.8.2 Connecting Netw ork Cables When R TM-A TCA-7350 is configured with the GE daughter car d, it pro vides two e xternal Ethernet interf aces with 10/100/1000M Base-T auto-negot iation.
RTM-ATCA-7350 Installati on and Use (6806 800H30F ) Hardware Preparation and Instal lation Connecting Optical Fibers 36 2.8.3 Connecting Optical Fiber s When R TM-A TCA-7350 is configured with the FC da ughter card , it pro vides two e xternal 2G FC interf aces.
3 RTM-ATCA-7350 Installati on and Use (6806800H30F) 37 Controls , LEDs and Connectors 3.1 Overview This chapter descr ibes: z F ace plat e connecto rs z F ace plat e LEDs z Rear panel connectors.
RTM-ATCA-7350 Installati on and Use (6806 800H30F ) Controls, LEDs and Conn ectors Face Plate Connectors an d LEDs 38 3.2 F ace Plate Connectors and LEDs The f ollowing figure sho ws the face plate of R TM-A TCA-7350 without daught er cards installed.
LEDs Controls, LEDs and Connectors RTM-ATCA-7350 Installati on and Use (6806800H30F) 39 The GE daughter card provides the net work por t indicators and th e FC daughter card pr ovides the FC status indi cators. Y ou can monitor th ese indicators to diagnose the cur rent status of R T M-A TCA-7350.
RTM-ATCA-7350 Installati on and Use (6806 800H30F ) Controls, LEDs and Connecto rs Connectors 40 3.2.2 Connector s R TM-A TCA-7350 provide s two daught er card connectors, as sho wn in the follo wing figure.
Connectors Controls, LEDs and Connectors RTM-ATCA-7350 Installati on and Use (6806800H30F) 41 z OOS indicator z IS indicator z A TN indicator z H/S indicator Figure 3-3 Connectors and Indicator s of R.
RTM-ATCA-7350 Installati on and Use (6806 800H30F ) Controls, LEDs and Connecto rs Connectors 42 3.2.2.1.1 USB Port R TM-A TCA-7350 prov ides a single por t USB connector on the f ace plate . The USB por t is compliant to th e USB 1.1 sp ecif ication.
Zone 3 Conn ectors Controls, L EDs and Conn ectors RTM-ATCA-7350 Installati on and Use (6806800H30F) 43 3.3 Zone 3 Connector s Zone 3 is composed of three connecto rs, P30, P31, and P32. The three connect ors are used to connect R TMs with R TM-A TCA-7350s.
RTM-ATCA-7350 Installati on and Use (6806 800H30F ) Controls, LEDs and Connecto rs P31 Pinout 44 R TM_EN0_ and RT M_EN_ are signals that indicate the R TM is firmly inser ted. 3.3.2 P31 Pinout P31 is used for por t 1 and por t2 signals of the F abr ic int erf ace, and the PCIE s ignals fro m MCH.
P32 Pinout Controls, LEDs and Connectors RTM-ATCA-7350 Installati on and Use (6806800H30F) 45 3.3.3 P32 Pinout P32 is used for por t1 and por t4 signals of the F a bric interface , and the PCI E signals from front board.
RTM-ATCA-7350 Installati on and Use (6806 800H30F ) Controls, LEDs and Connecto rs P32 Pinout 46 10 RT M_F C2_RX 3_H RTM _ F C2_RX 3_L GN D RT M_ F C1_RX 3_H RT M_ F C1_RX 3_L GN D RT M _ F C2_RX 0_H .
4 RTM-ATCA-7350 Installati on and Use (6806800H30F) 47 Functional Descr iption 4.1 Overview This chapter descr ibes: z Block diag ram z Daughter card s 4.2 Bloc k Diagram The f ollowing b lock diagr am shows the main components o f R TM-A TCA-7350 and ho w they interact/are connec ted.
RTM-ATCA-7350 Installati on and Use (6806 800H30F ) Functional Des cription GE Daughter Card 48 4.3.1 GE Daughter Car d The GE daughter car d provides two e xternal Ether net interf aces; 10/100/10 00M Base-T auto- negotiation an d RJ-45 interf ace.
FC Daughter Card Functional Description RTM-ATCA-7350 Installati on and Use (6806800H30F) 49 Optical modules are used t o provide t he optical interfaces at the face plate . See Connecting Optical Fibers on page 36 f or installing the optical module s.
RTM-ATCA-7350 Installati on and Use (6806 800H30F ) Functional Des cription FC Daughter Card 50.
A RTM-ATCA-7350 Installati on and Use (6806800H30F) 51 A Related Documentation A.1 Emer son Netw ork P ower - Embed ded Computing Documents The Emerson Netw ork P ower - Embed ded Computing publicat ions listed belo w are ref erenced in this manu al.
RTM-ATCA-7350 Installati on and Use (6806 800H30F ) Related Documentation R elated Specifications 52.
デバイスEmerson RTM-ATCA-7350の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Emerson RTM-ATCA-7350をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはEmerson RTM-ATCA-7350の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Emerson RTM-ATCA-7350の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Emerson RTM-ATCA-7350で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Emerson RTM-ATCA-7350を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はEmerson RTM-ATCA-7350の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Emerson RTM-ATCA-7350に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちEmerson RTM-ATCA-7350デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
