EminentメーカーEM4575の使用説明書/サービス説明書
ページ先へ移動 of 52
Wir eless Network Adapter User Guide W ireless Networ k Adapter.
Wir eless Network Adapter User Guide -1- Contents Chapter 1 Pr oduct Intr oduction ............................................... 3 1.1 Package C ontents ................................................................. 3 1.2 LED Indicator Description .
Wir eless Network Adapter User Guide -2- 4.2.1 Conf ig AP ............................................................................. 34 4.2.2 Adva nced .............................................................................. 34 4.2.3 Access C ontrol List .
Wir eless Network Adapter User Guide -3- Chapter 1 Product Introduction Thank yo u for cho osing th is wirele ss adap ter! The wireless adapter supports IEEE wireless standards, and is able to q uickly p rocess fi le tr ansfer , video , multi- media an d other applications that requir e higher bandwidth.
Wir eless Network Adapter User Guide -4- 1.3 Product Features ¾ Supports soft AP feature ¾ Detects wireless network and adjusts transmitting rate automatically ¾ Provides two working modes: Infrast.
Wir eless Network Adapter User Guide -5- to establish wireless network quickly and frees them from the trouble of cable distri bution. 1.5 Before Installati on 1.
Wir eless Network Adapter User Guide -6- 2. On the Computer Management screen ,select “ Device Manager ” － “Network adapters” , and right click the network adapter you want to disable and click “Disable” . 3. Click the “Y es” button on the di alogue box to disable the network adapter .
Wir eless Network Adapter User Guide -7- 1.7 Product Maintenance Please keep the product away from water and humid environment to guarantee its normal performance Protect it against hazardous substances (such as acids, alkali s etc). Please don’t directly expose the adapter to the sunlight or excessive heat.
Wir eless Network Adapter User Guide -8- Chapter 2 Installation Guide This chapter will guide you through the process of installing the network adapter software package, with the included software CD. The package integr ates driver and configuration software.
Wir eless Network Adapter User Guide -9- be ide ntified a fter be ing inse rted in to the ma inboard slot,or th e adapter can not scan signals after the driver being installed, please shut down your computer and clean the adapter ， and then re-install).
Wir eless Network Adapter User Guide -10- 2.5 T wo set u p types are provided: one is “Install driver only” ,the other is “I nstall d river and EMINEN T WLAN Utility ”. NOTE: you ma y select the first method when you are accustomed to use the WINDOWS built-in wireless configuration program.
Wir eless Network Adapter User Guide -1 1- recommended. 2.6. Clic k “Ins tall” to b egin the drive r insta llation . 2.7 Click “F inish” to c omplet e the inst allation.
Wir eless Network Adapter User Guide -12- Chapter 3 How to use the Windows Built-in Wireless Configuration This chapter explains to users who don’ t install configur ation program how to use W indows Built-in Wireless Configur ation to connect to the wireless network .
Wir eless Network Adapter User Guide -13- 3. On the right of the screen displayed are the currently scanned wireless networks. If the one you want to co nnect has not been scanned, click “Refresh Network List” to update the network list.
Wir eless Network Adapter User Guide -14- NOTE: If the wire less device you are connecting to is not encrypted, the key dialogue box will not pop up. 4.When it shows “Connected” as the picture below, then you can enjoy wireless access to Internet now .
Wir eless Network Adapter User Guide -15- 6. Select “Wireless Networks”and choose the one you want to modify , and then click “Properties” . 7.
Wir eless Network Adapter User Guide -16- 3.2 Wireless Network Con nection under VI STA 1. Click the Wire less Conne ction icon in t he lower right c orner o f your desktop and select “Connect to a network” as shown below.
Wir eless Network Adapter User Guide -17- “Connect” or double click the wireless network to connect. Click the R efresh icon in the upper right corner to update the network list if you don’t find the specified wireless network.
Wir eless Network Adapter User Guide -18- 4.The following screen will appear after successful ly connected to the wireless network. If you want to change the wireless network key , just right click the wireless network’ s SSID and then select “Properties” .
Wir eless Network Adapter User Guide -19- 3.3 Wireless Network Connecti on under Windows 7 Click the wireless connection in the lower right corner of the computer’s desktop to view the available wireless networks. Select the wireless network you wish to connect and click “Connect” or double click the wireless network to connect.
Wir eless Network Adapter User Guide -20- 3. It shows “Connected” after successfully connected. Y ou can disconnect it, view its status or modify the wirel ess network properties by right click th.
Wir eless Network Adapter User Guide -21- Chapter 4 Wireless Utility When you are installing the driver , select “Install driver and WLAN Config T ool” and the adapter driver and client utility will be insta lled. Al l function s of t his adap ter can b e configu red via utility interfa ce (in the fo llowing t ext it is abbre viated as UI).
Wir eless Network Adapter User Guide -22- and MiniSiz e. While the left c olumn disp lays T urn On/Off R F , Security /No security , and Signal status. 4.1.1 Site Survey The “Site Survey” screen displays currently scanned wireless signals and you can click one to connect the signal.
Wir eless Network Adapter User Guide -23- The detailed explanations about the auth entication and encryption are as follows: WEP ： Supports 10/2 6-bit Hex char acters and 5/13-bit ASCII. WPA-PSK ： Supports 8-63-bit ASCII and 8-64- bit Hex characters.
Wir eless Network Adapter User Guide -24- The Hex characters consist of numbers 0~9 and letters a-f . ASCII characters consist of any Ar abi c digitals/letters and characters.
Wir eless Network Adapter User Guide -25- 4.1.3 Profile Except the above common connection type, you can also connect to the wireless network by adding a profile on the “Profile“screen.The Profile screen is used to save the wi re less network parameters.
Wir eless Network Adapter User Guide -26- Add WPS Profile : WPS setting requires that the connecting wireless device support WPS functi on . WPS helps you to fulfill wireless encryption fast as well as secure your wireless network. For detailed setting steps, refer to appendix2.
Wir eless Network Adapter User Guide -27- key and click next. After a profile is successfully added, the profi le name can be seen on the profile list,you can edit , import or export the profile,click “ Active” to fi nish the connection,now you can also view the detailed connection status on the “Link Information” screen.
Wir eless Network Adapter User Guide -28- adapter can not scan the SSID, thus you need to connect by creating the corresponding profile. 2.Ad-Hoc Profile management Using the Ad-hoc mo de to establis h a wir eless ne twork req uires that each computer should be equipped with a wireless network adapter .
Wir eless Network Adapter User Guide -29- c .Select “Internet Protocol (T CP/IP)”an d click “Properties” . d . Please enter the IP address and subn et mask, and make sure this IP address is not used by other devices in the network.F or example: if your wireless adapter’s IP address is 192.
Wir eless Network Adapter User Guide -30- 2) Create a new Ad-hoc profile Click the “ Add” button and enter the network name in the SSID field to identify the wireless network, and select Ad-hoc as the network type and then select the channel.
Wir eless Network Adapter User Guide -31- After a profile is successfully added,the profi le can be seen on the profile list ,select it and cli ck the “ Active” icon on the lower right corner . And then search for the wireless network on other clients.
Wir eless Network Adapter User Guide -32- When the highlighted part shows “Connected“ ,it indicates the connection is successful. 4.1.4 Advanced This section is used to set the wireless mode and country region code for the current wireless adapter .
Wir eless Network Adapter User Guide -33- please set it here. 4.2 AP mode When you want to use t he wireless adapter’s AP function, please right click the UI icon on the ta skbar of your computer desktop and select “Switch to AP Mode” .
Wir eless Network Adapter User Guide -34- In this mod e, the clie nt utilit y diffe rs from that in statio n mode.. When it is switche d to AP mode, th e wireless adapt er will automatically set its IP address as 1 92.168.123.1, and other clients that connected to this AP will automatically obtain the IP addresses of: 192.
Wir eless Network Adapter User Guide -35- wireless adapter when working i n A P m o d e , s u c h a s N o forwarding among wireless clients and TX power . No forwarding among wireless clients : This feature isolates the communications among the wirel ess clients that are connected to the wireless adapter in AP mode.
Wir eless Network Adapter User Guide -36- are included in the list to access the wireless network, other hosts whose wireless MAC addresses have not been added to the list will be prohibited by defaul t.
Wir eless Network Adapter User Guide -37- 4.2.5 AP Mode under W i ndows 7 1. Under Windows 7, wireless adapters are allowed to work in both ST A and AP modes. Here, the wireless adapter acts not only as a client, but also an AP to send wireless signal, which equals to an ampli fier .
Wir eless Network Adapter User Guide -38- number of peers. AP mode has only one encryption method which is WPA2- AES by defaul t and cannot be modified.
Wir eless Network Adapter User Guide -39- Appendix 1: Acronyms and Terms WLAN Wireless Local Area Network 802.11 A family of specifications developed by the IEEE for WLAN technology . 802.11a An extension to 802.11 WLA N standards that provides up to 54 Mbps transmission in the 5 GHz UNI radio band.
Wir eless Network Adapter User Guide -40- Appendix 2: How to Set WPS WPS setting supports two modes :PBC and PIN. The detailed setting steps are as follows: 1.
Wir eless Network Adapter User Guide -41- Start PBC: Negotiating process: A profile forms automatically after the connection is successfully established.
Wir eless Network Adapter User Guide -42- If your wireless adapter provides a WPS button,you may use the button to perform PBC connection. a).Run the adapter’ s UI and switch to ST A TION mode b).T wo mi nutes after the router’ s WPS -PBC is enabled,press the adapter’s WPS button to connect in PBC mode.
Wir eless Network Adapter User Guide -43- for WPS mode and then input 18686791 in the PIN code field,and then click the “Save” button. When the WPS indicator of the Router starts flashing,it indicates that WPS feature is enabled. Click the next button on the Profile screen and click “Start PIN” to start the PIN code negotiation.
Wir eless Network Adapter User Guide -44- 2.2 Registrar Mode On the “ Add WPS Profile” screen, select the SSID of the AP that need to negotiate in WPS mode instead of selecting” Auto” .
Wir eless Network Adapter User Guide -45- Now you can view the S SID ,authenticaiton type,and encrytion type that need to be negotiated by the WPS in registr ar mode.These values can be modified but we recommend using the default.Here we use the defaut setti ng and then click the next buton.
Wir eless Network Adapter User Guide -46- Then click “Start PIN” on the screen below to perform WPS connection. NOTE: 1.Under th e WPS conne ction mode , when mult iple rout ers simultaneo usly enable t he WPS fun ction, it ma y cause connection failure.
Wir eless Network Adapter User Guide -47- Appendix 3: FAQ Q1 :Micros oft ICS se rvice i s pendin g. A1 : If ICS service cannot be enabled after a long time, please re-switch from Station Mode to AP Mode ,if not successful ,please restart the computer .
Wir eless Network Adapter User Guide -48- by other network adapters. 1.Please manually cancel or restart and cancel ICS, then re-switch to AP mode. 2. This dialogue box appears because vi rtual wi-fi miniport adapter can only be used by one wireless network adapter at a time.
Wir eless Network Adapter User Guide -49- configure sharing and then switch to AP . And an IP address of 192.168.0.1 will be obtai ned. If you still have any problem, please contact our customer service.
Wir eless Network Adapter User Guide -50- Appendix 4 :Regulatory Information Eu Declaration or Declaration of Conformity Hereby , our sup plier de clares t hat this Wireles s Adap ter is in compliance with the essenti al requirements and other relevant provisions of Directive 1999/5/EC.
Wir eless Network Adapter User Guide -51- help. T o assure continued compl iance, an y changes or modifications not expressly approved by the party responsible for compl iance could void the user’s authority to operate this equipment. (Example- u se only sh ielded interface cables whe n connect ing to computer or peripheral devices).
デバイスEminent EM4575の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Eminent EM4575をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはEminent EM4575の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Eminent EM4575の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Eminent EM4575で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Eminent EM4575を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はEminent EM4575の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Eminent EM4575に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちEminent EM4575デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
