AlienwareメーカーSentia m3400の使用説明書/サービス説明書
ページ先へ移動 of 152
I Preface Notice The company reserves the right to revise this publication or to change its contents without notice. Infor- mation contained herein is for reference only and does not constitute a commitment on the part of the man- ufacturer or any subsequent vendor.
II Preface FCC Statement (Federal Communications Commission) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
III Preface IMPORTANT SAFETY INSTRUCTIONS Follow basic safety precautions, including those listed below, to reduce the risk of fire, electric shock, and injury to persons when using any electrical equipment: 1.
IV Preface Instructions for Care and Operation The notebook computer is quite rugged, but it can be damaged. To prevent this, follow these suggestions: 1. Don’t drop it, or expose it to shock. If the computer falls, the case and the components could be dam- aged.
V Preface 3. A void interference. Keep the computer away from high capacity transformers, electr ic motors, and other strong magnetic fields. These can hinder proper performance and damage your data. 4. Follow the proper working pro cedures for the computer .
VI Preface Power Safety The computer has specific power requirements: • Only use a power adapter approved for use with this computer . • Y our AC/DC adapter may be designed for international travel but it still requires a steady , uninterrupted power supply .
VII Preface Battery Precautions • Only use batteries designed for this computer . The wrong battery type may explode, leak or damage the com- puter . • Do not remove any batterie s from the computer while it is powe red on. • Do not continue to use a battery that has been dropped, or that appears damage d (e.
VIII Preface Cleaning Do not apply cleaner directly to the computer; use a soft clean cloth. Do not use volatile (petroleum distillates) or abrasive cleaners on any part of the computer. Servicing Do not attempt to service the computer yourself. Doing so may violate your warranty and expose you and the computer to electric shock.
IX Preface Travel Considerations Packing As you get ready for your trip, run through this list to make sure the system is ready to go: 1. Check that the battery pack and any spares are fully charged. 2. Power off the computer and peripherals. 3. Close the display panel and make sure it’s latched.
X Preface On the Road In addition to the general safety and maintenance suggestions in this preface, and Chapter 8: Troubleshoot- ing, keep these points in mind: Hand-carry the notebook - For security, don’t let it out of your sight. In some areas, computer theft is very common.
XI Preface Developing Good Work Habits Developing good work habits is important if you need to work in front of the computer for long periods of time. Improper work habits can result in discomfort or serious injury from repetitive strain to your hands, wrists or other joints.
XII Preface Lighting Proper lighting and comfortable display viewing angle can reduce eye strain and muscle fatigue in your neck and shoulders. • Position the display to avoid glare or reflections from overhead lighting or outside sources of light.
XIII Preface Contents Notice .................. ................ ................... .................... .. I FCC Statement ................... ............... .................... .II Instructions for Care and Operation ..................... IV Power Safety .
XIV Preface Configuring the TouchPad and Buttons .............. 2-11 Audio Features ....................................................... 2-12 8 Channel Sound Support ........................... ........ 2-13 Adding a Printer .......................
XV Preface Wireless LAN .......... ............................... ............ 4-12 Bluetooth .............. .................... ................... ........ 4-12 PC Camera ............................... ................... ........ 4-12 Port Replicator .
XVI Preface Sertek PC Camera Driver Installation (WinXP) ... 7-7 PC Camera Audio Setup ................................. ...... 7-8 BisonCap ................... ................ ................... ........ 7-10 Eliminating Screen Flicker ............
XVII Preface Intel Video Driver Controls Intel Video Driver Installation ................................ B-1 Dynamic Video Memory Technology ..................... B-2 Intel Graphics Properties ......................................... B-3 Schemes ...
XVIII Preface.
Overview 1 - 1 Quick Start Guide 1 Chapter 1: Quick Start Guide Overview This Quick Start Guide is a brief introduction to the basic features of your computer, to navigating around the computer and to getting your system started.
1 - 2 Overview Quick Start Guide 1 Advanced Users If you are an advanced user you may skip over most of this Quick Start Guide. However you may find it useful to refer to “What to Install” on page 4 - 1 , “BIOS Utilities” on page 5 - 1 and “Upgrading The Computer” on page 6 - 1 in the User’s Manual.
Overview 1 - 3 Quick Start Guide 1 Not Included Operating Systems (e.g. Windows XP ) and applications (e.g. word processing, spreadsheet and database pro- grams) have their own manuals, so please consult the appropriate manuals. System Software Your computer may already come with system software pre-installed.
1 - 4 System Startup Quick Start Guide 1 System Startup 1. Remove all packing materials. 2. Place the computer on a stable surface. 3. Securely attach any perip herals you want to use with the noteb ook (e.
System Map: Top View with LCD Panel Open 1 - 5 Quick Start Guide 1 System Map: Top View with LCD Panel Open Figure 1 - 2 - Top View with LCD Panel Open 2 5 1 7 8 4 6 9 3 Wireless Device Operation Aboard Aircraft The use of any portable electronic transmission devices aboard aircraft is usually prohibited.
Quick Start Guide 1 - 6 LED Indicators 1 LED Indicators The two sets of LED indicators ( LED Status Indica- tors and LED Power & Communication Indicators ) on the computer display helpful information about the current status of the computer.
Quick Start Guide Hot-Key Buttons & Keyboard 1 - 7 1 Hot-Key Buttons & Keyboard These buttons give instant access to the default Inter- net browser and e-mail program, and to a user-defined application, with one quick button press.
1 - 8 Function Keys Quick Start Guide 1 Function Keys To use the function keys, press and hold the Fn key, then press the appropriate function key (F3 - F12 etc.
System Map: Front, Rear & Left Views 1 - 9 Quick Start Guide 1 System Map: Front, Rear & Left Views 5 6 7 4 3 2 1 Front Rear Figure 1 - 4 Front, Rear & Left Views 1. LED Power & Communication Indicators 2. 4-in-1 Ca rd Reader 3. External Monitor Port 4.
1 - 10 System Map: Right View Quick Start Guide 1 System Map: Right View 1 Changing DVD Regional Codes Go to the Control Panel and double-click System > Hardware (tab), click Device Manager , then cli ck the + next to DVD/CD-ROM drives .
System Map: Bottom View 1 - 11 Quick Start Guide 1 System Map: Bottom View CPU The CPU is not a user ser- viceable part. Op ening this compartment, or access- ing the CPU in any way, may violate your warranty. Overheating To prevent your computer from overheating make sure nothing blocks the Vent/Fan Intake whi le the computer is in use.
1 - 12 Windows XP Start Menu & Control Panel Quick Start Guide 1 Windows XP Start Menu & Control Panel Most of the control panels, utilities and programs within Windows XP (and most other Windows versions) are accessed from the Start menu.
Video Features 1 - 13 Quick Start Guide 1 Video Features Your computer will have built-in Intel ( Intel GMA 900 ) on-board video. You can switch display devices, and configure display options, from the Display Properties control panel in Windows as long as the appropriate vid- eo driver is installed.
1 - 14 Video Features Quick Start Guide 1 Figure 1 - 8 - Displa y Properties Desktop Intel Display Properties 1 2 3.
Video Features 1 - 15 Quick Start Guide 1 Display Devices & Options Besides the built-in LCD, you can also use an external VGA monitor (CRT)/ external Flat Panel Display or TV as your display device. A VGA monitor/Flat Panel Display connects to the external monitor port, a TV to the S-Video-Out Port.
1 - 16 Power Management Features Quick Start Guide 1 Power Management Features The Power Options control panel icon in Windows (see page 1 - 12 ) allows you to configure power management features for your computer.
Features & Components Overview 2 - 1 2 Chapter 2: Features & Components Overview Read this chapter to learn more about the following main features and compo- nents of the computer: • Hard Di.
Features & Components 2 - 2 Hard Disk Drive 2 Hard Disk Drive The hard disk drive is used to store your data in the computer. The hard disk can be taken out to accommodate other 2.5" parallel (PATA) hard disk drives with a height of 9.5 mm. The hard disk is accessible from the bottom of your computer as seen below.
Features & Components Optical (CD/DVD) Device 2 - 3 2 Optical (CD/DVD) Device There is a bay for a 5.25" optical (CD/DVD) device (12.7mm height).
Features & Components 2 - 4 Optical (CD/DVD) Device 2 Handling CDs or DVDs Proper handling of your CDs/DVDs will prevent them from being damaged. Please follow the advice below to make sure that the data stored on your CDs/ DVDs can be accessed. Note the following: • Hold the CD or DVD by the edges; do not touch the surface of the disc.
Features & Components Optical (CD/DVD) Device 2 - 5 2 DVD Regional Codes To change the DVD regional codes see “Changing DVD Regional Codes” on page 1 - 10 .
Features & Components 2 - 6 4-in-1 Card Reader 2 4-in-1 Card Reader The card reader allows you to use some of the latest digital storage cards. Push the card into the slot and it will appear as a removable device, and can be ac- cessed in the same way as your hard disk (s).
Features & Components PC Card Slot 2 - 7 2 PC Card Slot The computer is equipped with a PCMCIA 3.3V/5V slot for one type II PC- MCIA CardBus PC Card Slot. Make sure you install the PCMCIA/Card Read- er Card driver (see “PCMCIA/Card Reader (WinXP)” on page 4 - 10 ).
Features & Components 2 - 8 Auto Mail Checker 2 Auto Mail Checker After you have installed the driver for the Auto Mail Checker program (see “AutoMail (WinXP)” on page 4 - 11 ) you may then configure it to give you notification when you receive new mail.
Features & Components Auto Mail Checker 2 - 9 2 You may then configure the options for your mailserver, name, password, pro- gram and method(s) of notification. Note Check with your Inter- net Service Provider, network administrator or Mail Service provid- er for details on what to put on these pages.
Features & Components 2 - 10 Application Hot-Key 2 Application Hot-Key The hot-key buttons give instant access to the default Internet browser and e- mail program, and to a user-defined application, with one quick button press.
Features & Components TouchPad and Buttons/Mouse 2 - 11 2 TouchPad and Buttons/Mouse The TouchPad is an alternative to the mouse; however, you can also add a mouse to your computer through one of the USB ports. The TouchPad buttons function in much the same way as a two-button mouse.
Features & Components 2 - 12 Audio Features 2 Audio Features You can configure the audio options on your computer from the Sounds and Audio Devices Windows control panel, or from the Sound Effect Man- ager icon in the taskbar/control panel (this will bring up the Realtek Audio Configuration menus).
Features & Components Audio Features 2 - 13 2 8 Channel Sound Support If you wish to configure your system for 8 channel sound support, then the fol- lowing ports should be used as outputs. Double-click the appropriate icon (e.g. ) to bring up the “Connected device:” dialog box to co nfigure the output port.
Features & Components 2 - 14 Adding a Printer 2 Adding a Printer The most commonly used peripheral is a printer. The following conventions will help you to add a printer, however it is always best to refer to the printer manual for specific instructions and configuration options.
Power Management Overview 3 - 1 3 Chapter 3: Power Management Overview To conserve power, especially when using the battery, your computer uses the ACPI power management system. Power management conserves power by controlling individual components of the computer (the monitor and hard disk drive) or the whole system.
Power Management 3 - 2 The Power Sources 3 The Power Sources The computer can be powered by either an AC/DC adapter or a battery pack. AC/DC Adapter Use only the AC/DC adapter that comes with your computer. The wrong type of AC/DC adapter will damage the computer and its components.
Power Management Turning on the Computer 3 - 3 3 Turning on the Computer Now you are ready to begin using your computer. To turn it on simply press the power button on the front panel.
Power Management 3 - 4 Power Schemes 3 Power Schemes You can set your computer to conserve power through individual components by means of Power Schemes .
Power Management Power Schemes 3 - 5 3 Each Windows Power Scheme will also adjust the processor performance of your machine in order to save power. This is worth bearing in mind if you are experiencing any reduced performance (especially under DC/battery power).
Power Management 3 - 6 System Power Options 3 System Power Options You can use the system power options to stop the computer’s operation and restart where you left off.
Power Management System Power Options 3 - 7 3 Standby Standby saves the least amount of power, but takes the shortest time to return to full operation. During Standby the hard disk is turned off, and the CPU is made to idle at its slowest speed. All open applications are retained in memo- ry.
Power Management 3 - 8 Configuring the Power Button 3 Configuring the Power Button The power button may be set to send the computer in to either Standby or Hi- bernate mode ( Figure 3 - 3 ). In Standby mode, the LED will blink blue. In Hibernate mode the LED will be off (battery) or amber (AC/DC adapter).
Power Management Battery Information 3 - 9 3 Battery Information Please follow these simple guidelines to get the best use out of your battery. New Battery Always completely discharge, then fully charge, a new battery (see “Battery FAQ” on page 3 - 12 for instructions on how to do this).
Power Management 3 - 10 Battery Information 3 Battery life may be shortened through improper maintenance. To optimize the life and improve its performance, fully discharge and recharge the battery at least once every 30 days . We recommend that you do not remove the battery yourself.
Power Management Battery Information 3 - 11 3 Proper handling of the Battery Pack • DO NOT disassemble the battery pack under any circumstances • DO NOT expose the battery to fire or high temperat.
Power Management 3 - 12 Battery Information 3 Battery FAQ How do I completely discharge the battery? Use the computer with battery power until it shuts down due to a low battery.
Drivers & Utilities What to Install 4 - 1 4 Chapter 4: Drivers & Utilities This chapter deals with installing the drivers and utilities essential to the operation or improvement of some of the computer’s subsystems.
Drivers & Utilities 4 - 2 What to Install 4 Navigate (Browse..) to D: You will notice that many of the instructions for driver installation require you to “ Navigate (Browse) to D: ”. We assume that you will instal l all drivers and utiliti es from the built-in CD device and it is assign ed to “ Driv e D: ”.
Drivers & Utilities What to Install 4 - 3 4 Service Packs Check the warnings on the following pages regard- ing installation of the appropriate Service Pack for your Windows OS. Make sure you have installed the appropriate Service Pack before installing all the drivers.
Drivers & Utilities 4 - 4 What to Install 4 Authorized Driver Message If you receive a message telling you that the driver you are installing is not authorized ( Digital Signa- ture Not Found) , just click Yes or Continue Any- way to ignore the message and continue the installation procedure.
Drivers & Utilities Driver Installation 4 - 5 4 Driver Installation Insert the Device Drivers & Utilities + User’s Man- ual CD-ROM and click Install WinXP Drivers (button). If you wish to install the drivers manually see page 4 - 7 . Figure 4 - 2 - Drivers Installer Screen 1 1.
Drivers & Utilities 4 - 6 Driver Installation 4 Table 4 - 1 - Driver Installation Driver Installation Procedure This section covers driver and utility installation in- structions for Windows XP Home & Professional.
Drivers & Utilities Driver Installation 4 - 7 4 Manual Driver Installation If you wish to install the drivers manually, click the Exit button to quit the Drivers Installer applica- tion, then follow the manual installation procedure for each driver.
Drivers & Utilities 4 - 8 Driver Installation 4 Chipset (WinXP) 1. Click 1.Install Chipset Driver > Yes from the Drivers Installer menu. OR Click S tart (menu) > Run... and navigate ( Br owse.. ) to D:DriversChipsetSetup.exe and click OK . 2.
Drivers & Utilities Driver Installation 4 - 9 4 LAN (WinXP) 1. Click 4.Install LAN Driver > Yes from the Drivers Installer menu. OR Click S tart (menu) > Run... and navigate ( Br owse... ) to D:DriversLANSetup.exe and click OK . 2. T o continue click Next .
Drivers & Utilities 4 - 10 Driver Installation 4 TouchPad (WinXP) 1. Click 6.Install TouchPad Driver > Yes from the Drivers Installer menu. OR Click S tart (menu) > Run... and navigate ( Br owse.. ) to D:DriversT ouchPadSETUP .EXE and click OK .
Drivers & Utilities Driver Installation 4 - 11 4 Hot-Key (WinXP) 1. Click 8.Install Hotkey Utility > Yes from the Drivers Installer menu. OR Click S tart (menu) > Run... and navigate ( Br owse.. ) to D:DriversHotkeySetup.exe and click OK . 2.
Drivers & Utilities 4 - 12 Driver Installation 4 Wireless LAN See the introduction in “Intel PRO/Wireless Mini- PCI WLAN Module” on page 7 - 2 , and check the installation procedure. Bluetooth See install procedure in “Bluetooth Module” on page 7 - 4 .
BIOS Utilities Overview 5 - 1 5 Chapter 5: BIOS Utilities Overview This chapter gives a brief introduction to the computer’s built-in software: Diagnostics: The POST (Power-On Self Test) Configuration: The Setup utility If your computer has never been set up, or you are making important changes to the system (e.
BIOS Utilities 5 - 2 The Power-On Self Test (POST) 5 The Power-On Self Test (POST) Each time you turn on the computer, the system takes a few seconds to con- duct a POST , including a quick test of the on-board RAM (memory). As the POST proceeds, the computer will tell you if there is anything wrong.
BIOS Utilities The Power-On Self Test (POST) 5 - 3 5 Failing the POST Errors can be detected during the POST . There are two categories, “fatal” and “non-fatal”. Fatal Errors These stop the boot process and usually indicate there is something seriously wrong with your system.
BIOS Utilities 5 - 4 The Setup Program 5 The Setup Program The Phoenix Setup program tells the system how to configure itself and man- age basic features and subsystems (e.g. port configuration). Entering Setup To enter Setup , turn on the computer and press F2 during the POST .
BIOS Utilities The Setup Program 5 - 5 5 Setup Screens The following pages contain additional advice on portions of the Setup . Along the top of the screen is a menu bar with five ( 5 ) menu headings. When you select a heading, a new screen appears. Scroll through the features listed on each screen to make changes to Setup .
BIOS Utilities 5 - 6 Main Menu 5 Main Menu System Time & Date (Main Menu) The hour setting uses the 24-hour system (i.e., ØØ = midnight; 13 = 1 pm). If you can change the date and time settings in your operating system, you will also change these settings.
BIOS Utilities Main Menu 5 - 7 5 IDE Channel 0 Master/Slave (Main Menu) Pressing Enter opens the sub-menu to show the configuration of either a CD Device or HDD that on the computer’s IDE Channel 0. Use the Auto (Type:) setting to have the items configured automatically for you.
BIOS Utilities 5 - 8 Advanced Menu 5 Advanced Menu Installed O/S: (Advanced Menu) This setting tells the computer what kind of operating system you’re using.
BIOS Utilities Advanced Menu 5 - 9 5 Reset Configuration Data (Advanced Menu) This item is set to No as default. You can change the setting to Yes if you have installed a new add-on which has reconfigured the system, resulting in such a serious system conflict that the operating system is unable to boot.
BIOS Utilities 5 - 10 Security Menu 5 Security Menu Set Supervisor Password (Security Menu) You can set a password for access to the Setup utility. This will not affect ac- cess to the computer OS, (only the Setup utility) unless you choose to set a Password on Boot (see over).
BIOS Utilities Security Menu 5 - 11 5 Set User Password (Security Menu) You can set a password for user mode access to the Setup utility. This will not affect access to the computer OS, (only the Setup utility) unless you choose to set a Password on Boot (see below).
BIOS Utilities 5 - 12 Boot Menu 5 Boot Menu When you turn the computer on it will look for an operating system (e.g. Win- dowsXP ) from the devices listed in this menu, and in this priority order . If it cannot find the operating system on that device, it will try to load it from the next device in the order specified in the Boot priority order .
BIOS Utilities Boot Menu 5 - 13 5 Boot devices usually are hard drives, floppy drives, and CD-ROMs/DVD- ROMs and Networks (LANs). When you specify a device as a boot device on the Boot Menu , it requires the availability of an operating system on that device.
BIOS Utilities 5 - 14 Exit Menu 5 Exit Menu Choosing to Discard Changes , or Exit Discarding Changes , will wipe out any changes you have made to the Setup . You can also choose to restore the original Setup defaults that will return the Setup to its original state, and erase any previous changes you have made in a previous session.
Upgrading The Computer Overview 6 - 1 6 Chapter 6: Upgrading The Computer Overview This chapter contains information on upgrading the computer. Follow the steps outlined to make the desired upgrades. If you have any trouble or prob- lems you can contact your service representative for further help.
Upgrading The Computer 6 - 2 Overview 6 When Not to Upgrade These procedures involve opening the system’s case, adding and sometimes replacing parts.
Upgrading The Computer Removing the Battery 6 - 3 6 Removing the Battery If you are confident in undertaking upgrade procedures yourself, for safety reasons it is best to remove the battery. 1. T u rn the computer off , and turn it over . 2. Slide the latch in the direction of the arrow , and hold it in place.
Upgrading The Computer 6 - 4 Removing the Battery 6 4. Lift the battery out in the direction of the arrow . 5. Lift the battery out. 3 3 Figure 6 - 2 Battery Up 4 4 4 Figure 6 - 3 Battery O ut.
Upgrading The Computer Upgrading the Hard Disk Drive 6 - 5 6 Upgrading the Hard Disk Drive The hard disk drive can be taken out to accommodate other 2.5" parallel (PA- TA) hard disk drives with a height of 9.5mm (h) (see “Storage” on page C - 3 ).
Upgrading The Computer 6 - 6 Upgrading the Hard Disk Drive 6 3. Pull the tab to slide the hard disk and case assembly in the direction of arrow . 4. Lift the hard disk and case assembly out of the bay in the direction of arrow . 5. Remove screws - to release the hard disk from the case , and reverse the process to install any new hard disk.
Upgrading The Computer Upgrading the Optical (CD/DVD) Device 6 - 7 6 Upgrading the Optical (CD/DVD) Device 1. T urn off the computer , and turn it over and remove the battery . 2. Locate the memory bay cover and remove screws - . 3. Remove the bay cover .
Upgrading The Computer 6 - 8 Upgrading the System Memory (RAM) 6 Upgrading the System Memory (RAM) The computer has two memory sockets for 200 pin Small Outline Dual In-line (SO-DIMM) DDRII (DDR2) type memory modules (see “Memory” on page C - 2 for details of supported module types).
Upgrading The Computer Upgrading the System Memory (RAM) 6 - 9 6 3. Remove the bay cover . 4. Gently pull the two release latches on the sides of the memory socket in the direction indicated by the arrows ( & ) in Figure 6 - 9 .
Upgrading The Computer 6 - 10 Upgrading the System Memory (RAM) 6 5. The RAM module will pop-up, and you can remove it. 6. Pull the latches to release the second module if necessary . 7. Insert a new module holding it at about a 30° angle and fit the connectors firmly into the memory slot.
Upgrading The Computer Upgrading the Processor 6 - 11 6 Upgrading the Processor If you want to upgrade your computer by replacing the existing processor with a faster/new one you will need to contact your customer service representa- tive.
Upgrading The Computer 6-1 2 6.
Modules & Options Overview 7 - 1 7 Chapter 7: Modules & Options Overview This chapter contains the information on the WLAN , Bluetooth , PC Camera and Port Replicator modules which may come with your computer, depend- ing on the configuration purchased.
Modules & Options 7 - 2 Intel PRO/Wireless Mini-PCI WLAN Module 7 Intel PRO/Wireless Mini-PCI WLAN Module If you have included an Intel PRO/Wireless 2915ABG (802.1 1a/b/g) Mini- PCI WLAN module in your purchase option, you will have the appropriate software CD provided for your module.
Modules & Options Intel PRO/Wireless Mini-PCI WLAN Module 7 - 3 7 Intel WLAN Driver Installation 1. Make sure the module is powered on, then insert the Intel PROSet/ W ireless CD-ROM into the CD/DVD drive. 2. Click Install Software (button). 3. Click the button to accept the license and click Next > Next > OK.
Modules & Options 7 - 4 Bluetooth Module 7 Bluetooth Module If you have included an Bluetooth module in your purchase option, you will have the appropriate software CD provided for your module. Before installing the Bluetooth driver, make sure that the optional Bluetooth module is on (the LED will be blue).
Modules & Options Bluetooth Module 7 - 5 7 Figure 7 - 3 Bluetooth Control Panel & User Guides User Guide View the BlueSoleil User Guides from the Help Menu (or press the F1 key) in the IVT Corporation BlueSo- leil - Main Window control panel.
Modules & Options 7 - 6 PC Camera 7 PC Camera If you have included an PC Camera module in your purchase option, you will have the appropriate software CD provided for your module. Before installing the PC Camera driver, make sure that the optional PC Cam- era is on.
Modules & Options PC Camera 7 - 7 7 Sertek PC Camera Driver Installation (WinXP) 1. Press the Fn + F10 key combination to power on the PC Camera module (click Cancel if you see a “ New Hardware Found ” message) . 2. Insert the PC Camera CD-ROM into the CD/DVD drive.
Modules & Options 7 - 8 PC Camera 7 PC Camera Audio Setup If you wish to capture video & audio with your camera, it is necessary to setup the audio recording options in Windows .
Modules & Options PC Camera 7 - 9 7 Figure 7 - 4 Audio Setup (Windows XP).
Modules & Options 7 - 10 PC Camera 7 BisonCap BisonCap is a video viewer useful for general purpose video viewing and test- ing, and can capture video files to .
Modules & Options PC Camera 7 - 11 7 Eliminating Screen Flicker If you find that the video screen in the BisonCap program is flickering, you can try to adjust the setting in the Video Capture Filter options. 1. Run the BisonCap program. 2. Go to Options and scroll down to select “ Video Capture Filter .
Modules & Options 7 - 12 Port Replicator 7 Port Replicator If you have included the Port Replicator in your purchase option, the device will allow you to easily attach the notebook to standard, non-portable devices e.g. a printer or monitor. Note the sidebar warning on the power supply .
Modules & Options Port Replicator 7 - 13 7 Port Replicator Setup Instructions: 1. T u rn the computer OFF . 2. Attach the Port Replicator ’s external monitor cable to the external monitor port on the rear of the computer . 3. Atta ch the Port Replicator’s power cabl e to the DC-In jack on the right of the computer .
Modules & Options 7 - 14 Port Replicator 7 Port Replicator Serial (COM) Port Driver (WinXP) 1. Insert the provided Port Replicator CD into the computer ’ s CD/DVD drive. 2. Click S tart (menu) > Run... and navigate ( Browse... ) to D:PL-2303 Driver InstallerPL-2303 Driver Installer .
Modules & Options Port Replicator 7 - 15 7 6. Click " + " next to Other devices (if its sub-menu items are not shown). 7. Double-click AX88772 and click Driver (tab). 8. Click Update Driver (button). 9. Select “ No, not this time ” then click Next .
Modules & Options 7-1 6 7.
Troubleshooting Overview 8 - 1 8 Chapter 8: Troubleshooting Overview Should you have any problems with your computer, before consulting your service representative, you may want to try to solve the problem yourself. This chapter lists some common problems and their possible solutions.
Troubleshooting 8 - 2 Basic Hints and Tips 8 Basic Hints and Tips Many of the following may seem obvious but they are often the solution to a problem when your computer appears not to be working. • Power - Is the computer actually plugged into a working electrical outlet? If plugged into a power strip , make sure it is actually working.
Troubleshooting Backup and General Maintenance 8 - 3 8 Backup and General Maintenance •A l w a y s backup your important data, and keep copies of your OS and programs safe, but close to hand. Don’t for get to note the serial numbers if you are storing them out of their original cases, e.
Troubleshooting 8 - 4 Viruses 8 Viruses • Install an Anti-V irus program and keep the definitions file (the file which tells your program which viruses to look for) up to date. New computer viruses are discovered daily , and some of them may seriously harm your computer and cause you to lose data.
Troubleshooting Upgrading and Adding New Hardware/Software 8 - 5 8 Upgrading and Adding New Hardware/Software • Do not be tempted to make changes to your Windows Registry unless you are very sure of what you are doing, otherwise you will risk severely damaging your system.
Troubleshooting 8 - 6 Upgrading and Adding New Hardware/Software 8 • Thoroughly check any recent changes you made to your system as these changes may affect one or more system components, or software programs. If possible, go back and undo the change you just made and see if the problem still occurs.
Troubleshooting Power 8 - 7 8 Power Problem Possible Cause - Solution Y ou turned on the power but it doesn’t work. Battery missing / incorrectly installed. Check the battery bay , make sure the battery is present and seated prope rly (the design o f the battery on ly allows it to go in one way).
Troubleshooting 8-8P o w e r 8 The computer fe els too hot. Make sure the computer is properly ventila ted and the V ent/Fan intakes are not blocked. If this doesn’t cool it down, put the system into Hibernate mode or tu rn it off for an hour . Make sure the computer isn’t sitting on a thermal surface (see “Overheating” on page 1 - 11 ).
Troubleshooting D i s p l a y8-9 8 Display Problem Possible Cause - Solution Nothing appears on screen. The system is in a power saving mo de . T oggle the sleep/resume key combination, Fn + F4 (see “Sleep Button” on page 3 - 8 ). The screen controls need to be adjusted.
Troubleshooting 8 - 10 Boot Password 8 Boot Password Problem Possible Cause - Solution Y ou forget the boot password. If you forget the password, you may have to discharge the battery of the CMOS. Contact your service representative for help. Password Warning If you choose to set a boot password, NEVER forget your password.
Troubleshooting Audio & CD Device 8 - 11 8 Audio & CD Device Problem Possible Cause - Solution The sound cannot be heard or the volume is very low .
Troubleshooting 8 - 12 Keyboard 8 Keyboard Problem Possible Cause - Solution Unwelcome numbers appear when typing. If the LED is lit, then Num Lock is turned ON . (see “LED Indicators” on page 1 - 6 ). Other Keyboards If your keyboard is damaged or you just want to make a change, you can use any standa rd USB keyboard.
Troubleshooting Operation 8 - 13 8 Operation Problem Possible Cause - Solution The system freezes or the screen goes da rk. The system’ s power saving features have timed-out . Use the AC/DC adapter , press the sleep ( Fn + F4 ) key combination, or press the power button if no LEDs are lit.
Troubleshooting 8 - 14 Modules 8 Modules Problem Possible Cause - Solution The Wireless LAN/ Bluetooth modules cannot be detecte d. The modules are off. Check the LED indica tor to see i f the WLAN/Bluetooth mo dule is on or off (see “LED Indicators” on page 1 - 6 ).
Interface (Ports & Jacks) Interface (Ports & Jacks) A - 1 A Appendix A: Interface (Ports & Jacks) Overview The following chapter will give a quick description of the interface (ports & jacks) which allow your com- puter to communicate with external devices, connect to the internet etc.
Interface (Ports & Jacks) A - 2 Interface (Ports & Jacks) A Notebook Ports and Jacks Item Description Built-In Microphone The built-in microphone allo ws you to record on your computer Card Reader Port The card reader a llows you to use some of the late st digital storage cards.
Interface (Ports & Jacks) Interface (Ports & Jacks) A - 3 A Microphone-In Jack Plug an external microphone in to this jack to record on your co mputer . Mini-IEEE 1394 Port This port allows a high-speed connection to various peripheral devices, e.
Interface (Ports & Jacks) A - 4 Interface (Ports & Jacks) A S/PDIF-Out Jack This S/PDIF (Sony/Philips Digital Interface Format) Out Jack allows you to connect your DVD-capable PC to a Dolby AC-3 compatible receiver for “5.1” or ‘dt s’ surround sound.
Interface (Ports & Jacks) Interface (Ports & Jacks) A - 5 A Optional Port Replicator Ports and Jacks Item Description DC-In Jack Plug the supplied AC/DC adapter into this jack to power your computer .
Interface (Ports & Jacks) A - 6 Interface (Ports & Jacks) A USB 2.0/1.1 Ports These USB 2.0 compatible ports (USB 2.0 is fully USB 1.1 compliant) are for low-speed peripherals such as keyboards, mice or scanners, and for high-speed peripherals such as external HDDs, digital video cameras or high-speed scanners etc.
B Intel Video Driver Controls Intel Video Driver Installation B - 1 Appendix B: Intel Video Driver Controls The basic settings for configuring the LCD are outlined in “Video Features” on page 1 - 13 . Intel Video Driver Installation Make sure you install all the drivers in the order indicated in Table 4 - 1, on page 4 - 6 .
Intel Video Driver Controls B - 2 Dynamic Video Memory Technology B Dynamic Video Memory Technology Intel ® DVMT 3.0 automatically and dynamically allocates as much (up to 128MB ) system memory (RAM) as needed to the video system ( the video driver must be installed - see page B - 1 ).
B Intel Video Driver Controls Intel Graphics Properties B - 3 Intel Graphics Properties More advanced video configuration options are provided by the Intel(R) Graphics Media Accelerator Driver . 1. Open Display Properties (see “V ideo Features” on page 1 - 13 ).
Intel Video Driver Controls B - 4 Intel Graphics Properties B You may make changes to the Devices, Color, Schemes, Hot Keys by clicking the appropriate tab and adjusting the setting, then clicking OK.
B Intel Video Driver Controls Intel Graphics Properties B - 5 Schemes Use Schemes to configure quick settings for applications which require spe- cific resolution and color settings in order to run properly e.g. games, multi- media programs. To set the schemes: 1.
Intel Video Driver Controls B - 6 Display Devices B Display Devices Besides the built-in LCD, you can also use an external monitor/flat panel dis- play or TV as your display device. The following are the display options: 1. The built-in LCD. 2. An external monitor connected to the external monitor port.
B Intel Video Driver Controls Attaching Other Displays B - 7 Attaching Other Displays If you prefer to use a monitor or flat panel display, connect it to the external monitor port on the left of the computer. 1. Attach your external monitor to the external monitor port, and turn it on.
Intel Video Driver Controls B - 8 Disp lay Modes B Display Modes Single Display Only one of your attached displays is used. Intel(R) Dual Display Clone This mode will drive multiple displays with the same content. Each device may be configured independently for different resolutions, refresh rates, color quality etc.
B Intel Video Driver Controls Display Modes B - 9 To Enable Intel(R) Dual Display Clone Mode 1. Attach your external monitor to the external monitor port (or TV to the S- Video-Out Port), and turn it on. 2. Go to the Graphics Properties control panel (see “Intel Graphics Properties” on page B - 3 ) and click Devices (tab).
Intel Video Driver Controls B - 10 Display Modes B To Enable Extended Desk top Mode: 1. Atta ch your external monitor to the external mon itor port (or TV to the S- Video-Out Port), and turn it on. 2. Go to the Graphics Properties control p anel (see “Intel Graphics Properties” on page B - 3 ) and click Devices (tab).
B Intel Video Driver Controls Display Modes B - 11 To Enable Extended Desktop (Display Properties) 1. Attach your external monitor to the external monitor port (or TV to the S- Video-Out Port), and turn it on.
Intel Video Driver Controls B - 12 TV Settings B TV Settings If you are using a TV as a display device you may adjust the settings as fol- lows: 1. Attach your TV to the S-V ideo-Out Port and turn it on. 2. Go to the Graphics Properties control p anel (see “Intel Graphics Properties” on page B - 3 ) and click Devices (tab).
Specifications Specifications C - 1 C Appendix C: Specifications Latest Specification Information The specifications listed in this Appendi x are correct at the time of going to press. Certain items (particularly pro- cessor types/speeds and CD/DVD device types) may be changed or updated due to the manufacturer's release schedule.
Specifications C - 2 Specifications C Feature Specif ication Processor Intel Pentium® M Processor (478-pin) Micro-FC-PGA Package Models 730/ 740/ 750/ 760/ 770/ 780 ( P 0.09) 0.09 Micr on Process T echnology 2MB On-die L2 Cache & 533MHz FSB 1.6/ 1.
Specifications Specifications C - 3 C Sto r ag e One Changeable 12.7mm(h) Optical Device (CD/DVD) T ype Drive (see “Optional” on page C - 5 for drive options) Easy Changeable 2.
Specifications C - 4 Specifications C Card Reader Embedded 4-in-1 Card Reader (MS/ MS PRO/ SD/ MMC) Communication AZAL IA 56K Plug & Play Fax/Modem v .90/92 Compliant 10Mb/ 100Mb/ 1000Mb Fast Etherne t Intel® PRO/Wireless 2915ABG Mini PCI Wireless LAN Module ( Factory Option ) Bluetooth Module - V ersion 1.
Specifications Specifications C - 5 C Physical Dimen sions & We ig h t 333mm (w) * 243mm (d) * 24-33mm (h) 1 .9 kg Without Battery Optional Optical Drive Module Options: DVD-ROM Drive Module DVD/CD-RW Combo Drive Module DVD-Dual Drive Module Port Replicator (10/100 Base-T Ethernet Port, 4 * USB 2.
Specifications C-6 C.
デバイスAlienware Sentia m3400の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Alienware Sentia m3400をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはAlienware Sentia m3400の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Alienware Sentia m3400の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Alienware Sentia m3400で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Alienware Sentia m3400を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はAlienware Sentia m3400の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Alienware Sentia m3400に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちAlienware Sentia m3400デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。