EnGenius Technologiesメーカー1.2の使用説明書/サービス説明書
ページ先へ移動 of 47
1 1 1b/g W i reless SOHO Router User ’ s Manual V ersion: 1.2.
2 T able of Content s 1 INTRODUCTIO N.. ......... ......... ........... .......... ......... ......... ......... ......... ......... ......... ........... ......... .......... ...5 1.1 F EATURES & B ENEFITS ........ ......... ......... ......... .
3 3.5.6 DMZ ......... ......... ........... ......... ......... .......... ......... ......... ......... ......... ........... ......... ......... .......... .44 APPENDIX A – SP ECIFI CA TIONS..... ......... ......... ......... ........... .........
4 Revision History V ersi on Date Notes 1.0 Jul 10, 2008 Initial V ersion 1.1 Aug 6, 2008 1.2 Aug 1 1, 2008.
5 1 Introduction The Wireless SOHO Router operates sea m lessly in t he 2.4 GHz fr equency spectru m supporting the 802.1 1b (2.4GHz, 1 1Mbp s) and the newer , faster 802.
6 Package Contents Open the package carefully , and make sure th at none of t he items listed below are missing. Do not discard the pac king materials, in case of return; the unit m ust be shipped in its o riginal pac kage.
7 socket on the wall, and t he DC inlet into t he DC c onnector . Connection / A ctiv ity LED This LED will light up once an Ethernet cable is c onnected to one of the LAN ports or the WAN port. WAN LED This LED will light up once an Ethernet cable is c onnected to WAN (Internet) port.
8 Network Configurati on To be tter understand how the wireless L AN p roducts work toge ther to create a wireless network, it mi ght be helpful to dep ict a few of the possible wireless LAN PC card network con fig uration s. The wireless LAN products can be configured as: a) Ad-hoc (or peer-to-peer ) for department al or SOHO L ANs.
9 2 Understanding t he Hardw are Hardware Installat ion 1. Place the unit in an appropr iate location afte r conducting a site su rvey. 2. Plug o ne end o f the Ethernet cable into the LAN port o f the dev ice and another e nd into y our PC/Notebook. 3.
10 2. Select Internet Protocol ( TCP/IP) a nd then click o n th e Properties b utton. This will allow you to con figure the T CP/IP settings of y our PC/Notebook . 3. Select Use the following IP Address radio button and then enter the I P address and s ubnet m ask.
1 1 After logging in you will graphical user interface (GUI) of the device. The navigation drop-down menu on left is divided into four main sections: 1. Managemen t : This menu includes the administrato r settings, advanced wireless settings such as wireless MAC clone and RTS/frag m entation threshol d.
12 Status Click on t he Status link under the M anageme nt menu. The device status page is also displayed o nce you have logged in. This includ es details about the system uptime and firmware, LAN IP address and MAC address and the wireless settings such as the radio status, MAC address, SSID, R F channel, as we ll as WAN setti ngs.
13 Statistics Click on the Statistics link on the navigation drop-down menu. This page displays the trans m itted and r eceived packet s tatistics of the wired and wireless interface. Click on the R efresh button to refresh the statis tics. Dynamic DNS Click on the D DNS link on the navigation drop-down menu.
14 Time Zone Setting Click on the T ime Zone Setting link i n the n avigation m enu. This feature allows you to configure, update, and m aintain the correct time on t he device’s internal syste m clock as well as configure the time zone. The date a nd t ime of the device can be configured m anua lly or by sy nchr onizing with a time serve r.
15 Denial of Service (DoS) Click on the Denial of Service li nk in the navigation me nu . T his is a s ecurity f eatu re that blocks in trusions from th e Internet that may disrupt the n etwork service . Enable DoS protection : Place a check in this b ox to en able the D oS fe atures.
16 Log Click on the Log link on the navigation drop-do wn menu. Logs display a list of events that are triggered on the Ethernet and W ireless interface. This log can be referred when an unknown error o ccurs on the sy s tem or w hen a report nee ds to be se nt to the technica l support depart ment for debugging purposes.
17 Upgrade Firmware Click on the Upgra de Firmware link on the navigation d rop-down menu. Thi s page allows yo u t o upgrad e the f irmware of the device in order to improve the functionality and perfor mance. Ensure t hat y ou have downloaded the app r opriate firmware fro m the vendor’s website.
18 Restore the Confi guration from a File Click o n the Sa ve / Reload Settings l ink on t he navigation drop-down m enu. This option a llows you to restore a backup configuratio n from a file to t he device. C lick on the Browse bu tton to select the file and then clic k on Upload butt on.
19 A dmini strator Settings Click on the Password link on the navigation drop-down menu. This page allows you to configure th e password to acc ess this device from the web-br owser. Note : The de fault user name a nd password of t he device is adm in User Name : Spe cify a user na me that will be used to connect to the device.
20 L A N Settin gs – Static IP Click on the LAN Interface link on the navigation drop-down m enu. This f eature allows y ou to co nfigu re the LAN interface using a static IP address or as a DHCP server/client . This IP addres s is also used to ac cess the web-base d interface.
21 L A N Settin gs – DHC P Client Click o n the LAN l ink on the navigation drop-down m enu . This feature a llows y ou to configure t he LAN interface using a static IP address or as a DHCP server/client. This IP addr ess is also used to access the web-ba sed interface.
22 L A N Settin gs – DHC P Server Click o n the LAN l ink on the navigation drop-down m enu . This feature a llows y ou to configure t he LAN interface using a static IP address or as a DHCP server/client. DHCP s tands for Dyna m ic Host Configu ration Prot ocol.
23 W A N Setti ngs – Static IP Click on the WA N lin k on the navigation drop -down menu. This fe ature allows you to configure the W AN interface usi ng a static IP add ress, DHCP Client , PPoE, or PPTP. WAN A ccess T ype: Sele ct Static IP fro m the d rop-down list.
24 Enable I Psec pass through on VPN connection : Place a check in this box to enable the pass through of P PTP packets on a VPN connection. Enable I Psec pass through on VPN connection : Place a check in this box to enable the pass through of L2TP packets on a V PN connection.
25 Enable uPNP : Place a check in this box to enable UPnP. It is reco m mended to enable this feat ure as it’s used by several applica tions. Enable PING Access on WAN : Place a check in this box if y ou would like the devi ce to be pinged fr om the W AN side (ISP).
26 Connection Type: Select Continuous (alway s online), Connect on D emand (connect to the ISP only when you click on a website), or Manual (conn ect to the ISP only when y ou click on a ‘ Co nnect ’ button) fro m the drop-down list. Idle T ime: The PPPoE service can auto m atically d isconnect if the connection is idle.
27 WAN A c cess Ty pe: Sele ct PPTP from th e drop-down list. This type of connection is used when y our ISP has provided you a dedicated IP address. IP Address: Enter an IP ad dress for this device , which is assigned by y our ISP. Subnet Mask: Enter t he subnet mask for this I P a ddress, which is a ssigne d by y our ISP.
28 Wireless Click on the TCP/IP Settings link on t he navigation d rop-down m enu. You w ill then see five options. Basic Settings, Advanced Settings, Security , Access Control, a nd WDS Settings. Each o ption is described below. Wireless Basic Se tting s Click on the Basic Se ttings link on the navigation drop-dow n menu.
29 Show A ctive Cli ents : Click on this button to view a list of clients that are associated with this device . Click on the A pply Change s to save the cha nges. Wireless A dvanced Settings Click on the Advanced S ettings link on the navigation drop-down m enu.
30 Beacon Interval : Beacons are packets sent b y a wireless A ccess Point t o synchronize wireless d evices. Specify a Beacon Period value between 20 and 1 024. The default v alu e is set to 100 m illiseconds. Data Rate : Select a trans mission rate fro m t he drop-down list.
31 Wireless Security To protect your privacy this mode supports several types of wireless security : W EP WPA, W PA2, and W PA-Mixed. WEP is t he original wireless encry ption standard. WPA provides a high er level of security. The following section describes the security configuration i n detail.
32 Encryption : Select W EP f rom the drop-down list in order to enable W EP s ecurity and then clic k on the Set W EP key button. . Key Length : Select a 64-bit o r 128-bit W EP key length from the dro p-down list. Key Forma t: Select a key fo rmat such as HEX or ASCII from th e drop-down lis t.
33 Wireless Security – WP A / WP A 2-Mixed Select WPA o r WPA2-Mixed fro m the drop-down list if your wireless network uses WPA encry ption. WPA (Wi-Fi Protected Acce ss) was designed to improve upon t he security f eatures of W E P ( W ired Eq uivalent Privacy ).
34 Click on the A pply Change s to save the chan ges. Wireless A ccess Control Click on the Access Control link on t he navigation drop-down me nu. The MAC address filter section can be used t o filter network access by m achines b ased on t he unique M AC add resses of thei r netwo rk adapter (s).
35 WDS (Wireless Di stribution Sys tem) Click on the WD S link on the navigation d rop-down m enu. The W ireless D istributio n System feature configures this device as a repeate r and therefore extends the range/cove r age a rea of the wireless network.
36 WDS Security Click on the Set Security button to configure one of the security o ptions for the W DS. Options available are W EP, W P A and W PA2, and you must c on fig ure the same security setting on each Access Point linked w ith this one.
37 Encryption : Se lect a 64-bit o r 128-bit WEP encry ption fro m the drop -down list. Key Forma t: Select a key fo rmat such as HEX or ASCII from th e drop-down lis t. WEP Key: Specif y the WEP key Click on the Apply Changes to save the changes and then click on the Close button.
38 Encryption : Select a W PA or WPA 2 encry ption fro m the drop-down li st. The encry pti on algorithm used to secure th e data comm unic ation. TKIP ( Te mporal Key Integrity Protocol) provides p er-pac ket k ey generation and is based o n WEP.
39 Firewall Click on the F irewall lin k on the navigation drop-down menu. You will then see six options. Port filtering, IP filtering, MAC filtering, Port filtering, URL f iltering, DMZ.
40 You m ay place a check in the b ox on under t he Select column and then click on Delete Selected to re m ove t he selected entry . You may also click on Delete All to delete all the fil tering entries. IP Filtering Select IP Filtering from the drop-down list.
41 MAC Filtering Select MAC Filtering fr om the drop -down list. This feature is used to r estrict certain MAC address from accessing the Internet. These filters can be used for securing and restricting y our network. Enable MA C Filtering: Place a check in this box to enable this feature.
42 Port Forwarding Select Port For w arding from the drop-down lis t. This fe ature is used to automatically r edirect common network services to a specific m achine behind the NAT f irewa ll.
43 URL Filtering Select URL Filtering from the drop-down l ist. T his is a type of pa rental control feature used to restrict certain websites for m being accessed through y our network. These filters ca n be used fo r securing and restr icting your ne twork.
44 DMZ Select DMZ fro m the drop-do wn lis t. A demilitarized zone i s u sed to provide Internet services without sacrificing unauthorized access to its local private network. Typically, the DMZ host contai ns devices accessib le to Internet t raffic, such as web, FTP, email an d DNS servers.
45 Appendix A – Sp ecific ations St andards IEEE802.1 1b/g, IEEE802.1x , IEEE8 02.3, IEEE802.3u Wi-Fi data speed IEEE 802.1 1b: 1 1 /5.5/2/1Mbps IEEE 802.1 1g: 54/48 /36/24/18/12/9/6Mbps Compatibility IEEE 802.1 1g/ IEEE 802.1 1b Power Requirements Power Supply: 90 to 240 VDC 10 (depends on different countries) Device: 12 V/ 1.
46 Appendix B – FCC Interference Statement Federal Communication Commission Inter ference St atement This equipment has been test ed and f ound to c omply w ith the limits for a Class B digital device, purs uant t o Part 15 of t he FCC R ules.
47 Industr y Ca nada statement: This de vice c omplies with RSS- 210 of the I ndustry Ca nada R ules. Operatio n is subject to the following t wo conditions : (1) This d evice may no t cause harmful i nterf erence, and ( 2) this d evice must accept any interferenc e received, including interf erence that ma y cause undesire d operation.
デバイスEnGenius Technologies 1.2の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
EnGenius Technologies 1.2をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはEnGenius Technologies 1.2の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。EnGenius Technologies 1.2の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。EnGenius Technologies 1.2で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
EnGenius Technologies 1.2を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はEnGenius Technologies 1.2の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、EnGenius Technologies 1.2に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちEnGenius Technologies 1.2デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
