Allen & HeathメーカーXone:43の使用説明書/サービス説明書
ページ先へ移動 of 23
Allen & Heath 1 XONE:43 User Guide USER GUIDE Publication AP9968_1.
Allen & Heath 2 XONE:43 User Guide Limited One Y ear Manuf actur er’ s W ar ranty Allen & Heath warrants the Allen & Heath - branded hardwar e product and accessori es contained in the o.
Allen & Heath 3 XONE:43 User Guide P A CKED ITEMS Check that you have received the following: Safety Sheet Important ! Read this sheet before starting.
Allen & Heath 4 XONE:43 User Guide CONTENTS Congratulations on purchasing the Allen & Heath Xone:43 DJ mixer. The Xone:43 is a DJ mixer featuring four stereo dual input channels, a Mic/Aux input channel, 45mm linear VCA channel faders, Xone VCF filter, and X:FX external effects loop for send/return functionality with wet/dry control.
Allen & Heath 5 XONE:43 User Guide SETUP EXAMPLES.
Allen & Heath 6 XONE:43 User Guide MIC / AUX INP UT CHANNEL 3 Mic Input Standard 3-Pin XLR socket wired as Pin 1 = Ground, Pin 2 = hot (+), Pin 3 = cold (-). 2 Mic / Aux Select Switch Selects either the XLR microphone input or the alterna- tive Aux input.
Allen & Heath 7 XONE:43 User Guide PHONO / LINE INPUT CHANNELS 1, 2, 3 and 4 1 Phono / Line Select Switch Selects either the RCA phono input or the alternative RCA stereo line input. 2 Channel Level Control This control has a range from - 10dB to +10dB.
Allen & Heath 8 XONE:43 User Guide PHONO / LINE INPUT CHANNELS 1, 2, 3 and 4 9 Channel Fader A high quality, smooth travel fader adjusts the channel signal level from fully off to fully on.
Allen & Heath 9 XONE:43 User Guide FIL TER SECTION 1 2 3 4 5 1 X:FX Return to Filter Pressing this button routes the X:FX return to the VCF filter, instead of directly into the main mix buss. The effected channel signal can then be filtered as well, allow- ing extra versatility and creativity to be brought into the mix.
Allen & Heath 10 XONE:43 User Guide HEADPHONE SECTION 1 2 3 4 1 Headphone Outputs Stereo 1/4” TRS jack and 3.5mm mini -jack sockets. Plug in good quality stereo headphones intended for DJ mon- itoring. Use closed-ear headphones that provide max i- mum acoustic isolation when cueing your sources.
Allen & Heath 11 XONE:43 User Guide MASTER SECTION 1 Mix / Monitor Meters The main meters follow the selected monitor source. The default display is the mix level, pre-master level, which is overridden with an input channel level if the channel cue switch is selected.
Allen & Heath 12 XONE:43 User Guide Crossfader This lets you fade between signals routed to either side, typically to fade smoothly into a new music track or to creatively layer sounds when s cratch or cut mixing. The crossfader is a VCA controller which affects the level of signals routed via the filters.
Allen & Heath 13 XONE:43 User Guide REAR CONNECT ORS 1 2 3 AC Mains Input IEC cable with moulded mains plug suitable for your local supply. Important: Read the SAFETY INSTRUCTIONS sheet included with the Xone:43 and printed on the rear panel. Check that the correct mains lead with moulded plug has been supplied with your console.
Allen & Heath 14 XONE:43 User Guide REAR CONNECT ORS 5 6 4 Master Output Balanced XLR. This is the main output that feeds the house PA system. Plug into the hous e processor/amplifier system using balanced cables. Use balanced cables and equipment.
Allen & Heath 15 XONE:43 User Guide P ANEL DRA WINGS Rear P anel F r ont P an el.
Allen & Heath 16 XONE:43 User Guide Dimensions and Weights The console is fitted with rubber feet for desktop operation. Width Height Depth Weight Mixer 320 mm 110mm 370mm 5.
Allen & Heath 17 XONE:43 User Guide BLOCK DIA GRAM.
Allen & Heath 18 XONE:43 User Guide FIL TER REFERENCE The VCF Filters A voltage controlled filter is an audio filter where the cut-off frequency is altered by a DC control voltag e r ather than a variable resistor.
Allen & Heath 19 XONE:43 User Guide It is most important that the system level settings are correctly set. It is well known that many DJs push the level to maximum with meters peaking hard in the belief that they ar e getting the best from the system.
Allen & Heath 20 XONE:43 User Guide The connection to ear th (ground) in an audi o system is important for two reasons: SAFETY - To pr otect the opera tor from high voltage electric shock, and AUD.
Allen & Heath 21 XONE:43 User Guide REPLA CING THE C ROS SF ADER If the crossfader is subject to a lot of use it will, in time wear out and need replacing.
Allen & Heath 22 XONE:43 User Guide REPLA CING THE C ROS SF ADER Step 4: Gently slide the two halves of the console apart until the rear connector PCB is wholly visible. Step 5: With car e unplug the grey flat wireform from the connector PCB.
Allen & Heath 23 XONE:43 User Guide REPLA CING THE C ROS SF ADER Step 9: Fit the new r eplacement cross fader to the bracket as shown (slot 1). The longer (slot 2) beneath is for mounting the optional Innofader (not supplied). The standard crossfader must be fitted to s lot 1 and not slot 2.
デバイスAllen & Heath Xone:43の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Allen & Heath Xone:43をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはAllen & Heath Xone:43の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Allen & Heath Xone:43の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Allen & Heath Xone:43で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Allen & Heath Xone:43を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はAllen & Heath Xone:43の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Allen & Heath Xone:43に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちAllen & Heath Xone:43デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
