EpsonメーカーiDP3410の使用説明書/サービス説明書
ページ先へ移動 of 156
DOT MA TRIX PRINTER MODEL iDP3 410.
iDP3410 User's M anual CIT IZEN Declaration of Conform ity Ma nuf a ct ur e r ' s N a m e : Ja pa n CB M C or p or a ti o n Ma nuf a ct ur e r ' s A ddr es s : CBM B ldg.
iDP3410 User's M anual CIT IZEN IMPORT ANT SAF ETY INST RUCTIONS • Read al l of t hes e ins t ructi ons and s av e th em fo r fut ure refer enc e. • F ollow all warnings and instructions marke d on the product. • Unplug this product fr om the wall outle t before cleaning.
iDP3410 User's M anual CIT IZEN WICHT I GE SICHERHE ITSANWE I SUNGEN • Lesen Sie die nachfolgend e n Anweisungen s orgfältig durch un d be wahren Sie sie a uf. • Befolgen S ie a ll e auf dem D ruc ke r vermerkten Hinw eise und An we isungen.
iDP3410 User's M anual CIT IZEN IMPORT ANT : This e quipm e nt g e nerates, uses, a nd can r adi ate radio frequency e nergy and if not installe d and used in ac c ordance with the instruction m a nual, may c ause interference to radio communications.
iDP3410 User's M anual CIT IZEN <CAUTIONS> 1. Prior to using the e quipm e nt, b e sure to re a d this Us e r's Manual thorou ghly . Please keep it h andy for ref eren ce wh ene v er it m ay b e ne ed ed. 2. The information contained here in m a y b e changed without prior notice.
iDP3410 User's M anual CIT IZEN SAFET Y PR E C A UT I ON S -- --- BE SUR E TO OBSE R VE In order to pre vent h azards to an operator or othe r persons a nd damage to p r operty , be sure to obs erve the following p recautions.
iDP3410 User's M anual CIT IZEN WARNING ! Nev e r h andle the equipment in the following m a nners, as it may br e ak, become out of o rder, o r ov erheat ca using sm oke and resulting in f ire or electric sho c k.
iDP3410 User's M anual CIT IZEN PRECAUT IONS FOR INSTALLATION • Do not use or store th e e quipmen t in a place expos e d to f ire , moisture, or di rect sunlight, or in a pl ace near a heat er.
iDP3410 User's M anual CIT IZEN PRECAUT IONS FOR HANDLING Do not handle the equipment in the follo wing m a nners, becaus e problems may r esult. • Do not use a po wer supply other than the sp e cif ie d A C adapter . • Do not print when there is no r ecording p aper or ink ribbon s e t in the equipm e nt.
iDP3410 User's M anual CIT IZEN DAILY MAINTE NANCE • Prior to sta rting maintenan c e wo rk, be sure to turn of f the main body . • Use a dry soft cloth to wipe of f stains and dust from the surf ace s of the main body case . F or sev e re soiling, dip the c loth in water a n d wring it, for wiping of f the soil.
iDP3410 User's M anual CIT IZEN CO NTENTS 1. OU TLINE .................................................................................................................... ........................... 1 1.1 Features ................................
iDP3410 User's M anual CIT IZEN 11. DRA WER KICK -OUT CONNE CT OR AND P O W E R CON NECT OR ................................................ 31 11.1 Specif ications of Dra wer Kick-Out Conn e ctor..................................................
iDP3410 User's M anual CIT IZEN <<<Germa n>>> 4. B ETRIEB .................................................................................................................... ....................... 128 4.1 Ans c hluß d e s Netzteils .
iDP3410 User's M anual 1 CITIZ EN 1. OUTLINE This is a sma ll-size dot impact printer dev eloped for v arious data communication ter minals, POS terminals, kitche n-use printers, b ank card, terminals, and so on. Its abundant b uilt- in featur e s allo w you to widely use this printer for dif feren t applications.
iDP3410 User's M anual 2 CITIZ EN 2. B ASI C SPECIF I CA TI ONS 2.1 Model C lassif ication The printer m ode l is c lassifi e d by the follo wing designation method.
iDP3410 User's M anual 3 CITIZ EN 2.2 Basic S pecificati o ns Model Item iDP 3410-*F120 iDP3410-*F230 Printer m e chanism DP-410 Series (CITIZEN) Print method Seria l dot impact method (Bi - directional print) Print width 64 mm Print hea d 9 pins Print spee d Approx.
iDP3410 User's M anual 4 CITIZ EN 2.3 P aper Speci ficatio n 2.3.1 Rec o mmende d P aper • T ype : Normal paper and n on-carbon paper • P ape r width : 76 +/- 0.
iDP3410 User's M anual 5 CITIZ EN 3. OUT ER APPEARANCE AND COM PONENT P ARTS.
iDP3410 User's M anual 6 CITIZ EN 4. OPER A TION 4.1 Co nnectin g A C A dapter (1) T urn of f the Po wer switc h. (2) Co nnect t h e cabl e con ne ctor o f the A C ad apt er to t h e po wer co nnect or lo cat ed on t h e back of t h e prin t er .
iDP3410 User's M anual 7 CITIZ EN 4.2 Co nnectin g Interfac e Cab le (1) T urn off the pow er . ( Mating side includ ed) (2) Chec k the top and bottom o f the cable terminals, and connect to th e interface c onne c tor . (3) F ix the ca ble t ermin als.
iDP3410 User's M anual 8 CITIZ EN 4.4 Setti ng the Cassette R ibb on (1) Ope n the printer cov er . (2) I f the ribbon is slackened, tu rn th e knob in the arro w- in dic ated direction to gi ve th e t e nsion to it before setting.
iDP3410 User's M anual 9 CITIZ EN 4.5 Ins ert ing the P aper (1) Put your ha nds in the c oncav e parts on both sides of the printer cover , and open it until it comes to a stop. (2) Cut the e nd of the paper roll at close to a right a ngle. CAUTION : • Be s ure t o us e th e sp eci fied p aper roll.
iDP3410 User's M anual 10 CITIZEN CAUTION : • If the paper is slack, r ew ind it, to remove the slack. • If th e pap er is s et slan t wise, op erat e th e pape r- free l ever, to cor rect the pap er p osi tio n. • While printing, do not hold the paper.
iDP3410 User's M anual 11 CITIZEN 4.6 How t o Remo ve Remaining P aper Roll (1) Ope n the printer cov er . (2) Pushing the paper-free le ve r in the arro w direction, pull out the paper roll. CAUTION : When pulling out the paper (Forw ard/Reverse direction), be sur e to op e rate the paper- free l ever.
iDP3410 User's M anual 12 CITIZEN 4.8 Opera tion P anel a nd Di spla y of E rr or (1) POWER lamp(Green) Illuminate d when the po wer is turned on. (2) E RR O R lamp( R e d) Illuminate d when the printer is out of pa per or h a s a printer mechanical error or communi c ation error .
iDP3410 User's M anual 13 CITIZEN 4.9 Opera tion Flo w at P ower -on "C lear Dat a in B uf fer" Y e s( FEED SW) and E nla rged Red Print Feed SW ? Buffe r da ta FEED SW ? (CONTI NUE) 1 Sec. Passed Powe r - on Ye s No Prin ts " =H ex adeci malD u m p = Dump Mod e Te s t P r i n t No Ye s Of f On FEED SW ? (A GAI N) 1 Sec.
iDP3410 User's M anual 14 CITIZEN 5. DIP SWIT CH SET TI NG 5.1 Locati on of DIP Switc h (1) T urn off the pow er . (2) Remo ve a cassette ribbon. The DIP swit c hes are located as sho w n in the figure belo w .
iDP3410 User's M anual 15 CITIZEN 5.2 DIP Switches S etti ng 1) DIP Switch 1 No. Function ON OFF Upon Shipment f rom F actory DS1-1 Auto cutter Y e s No OFF DS1-2 In ternat ional ch aract ers ON .
iDP3410 User's M anual 16 CITIZEN 2) DIP Switch 2 No. Function ON OFF F a ctor y Setting DS2-1 Bit length 8 bits 7 bits ON DS2-2 P arity No Y es ON DS2-3 Odd/Ev e n Odd Even ON DS2-4 Comm unicati.
iDP3410 User's M anual 17 CITIZEN 6. PRESET JUM PER SETT ING 6.1 Locati on of P rese t J umper (1) T urn off the pow er . (2) Remove a cassette ribbon. (3) Remove the top co ver . The preset jumper is loc ate d as sho w n in the fi gure below . Seria l Interface P a ra llel Interface 6.
iDP3410 User's M anual 18 CITIZEN 7. MODE SE TT ING METHOD This printer has the CBM, ST AR, and ESC/ POS mode. Any desi re d mode can be selected a nd s e t accord in g to your need. (1) Se tting method • See 5 . DI P SWIT CH SE TTIN G. • Seeing the settings of the DIP switc h 1- 9 a nd 1-10 and those of the preset jumpe r, set each mode.
iDP3410 User's M anual 19 CITIZEN 8. INPUT BUFFER B A CKUP FUNCTION 8.1 Buff er Size W ith the DIP switch, you can set eithe r 6K byt es or 256 bytes.
iDP3410 User's M anual 20 CITIZEN 9. P A RALLE L INTE RF A CE 9.1 Speci ficatio ns • Data input system : 8-bit para llel system (D A T A1 to D A T A8) • Control s ignals : A CK, BUS Y , STB, .
iDP3410 User's M anual 21 CITIZEN 9.3 Inpu t and Ou tput S ignals 9.3.1 I nput a nd Out put Si gnals (1) Input signals to the printer • D A T A : A n 8-bit parallel signal. (Positiv e logic) • STB : A strobe signal to read th e 8-bit data. (Negati v e logic) • RESET : A signal to reset the printer f rom the outside.
iDP3410 User's M anual 22 CITIZEN 9.3.2 Elec trical Char acter istics (1) Input signal lev el All the input signals are at the TTL l evel. "HIGH" le vel : 2.0 V a t minimum "LO W" le v el : 0.8 V a t m aximum (2) Output signal lev e l All the output s ignals a re at th e TTL le vel.
iDP3410 User's M anual 23 CITIZEN 9.3.3 Timing C hart (1) Data input and printing timing T1, T2, T3 : 0.5 µ s MIN T4 : 270 ns MAX T5 : 2.3 µ s TY P T6 : 500 ms MI N (At p ow er-on) 9.
iDP3410 User's M anual 24 CITIZEN 10. SERIAL INTERF A CE 10.1 Spec ificatio ns (1) Synchr ono us syste m: Asynch ronous (2) Baud rate : 150, 300, 600 , 1,200, 2,400, 4,800, 9,600, or 19,200 bps (.
iDP3410 User's M anual 25 CITIZEN 10.2 Co nnector 's P in C onfig urati on Mode No. CBM ST AR E CS/PO S 1F G ←← 2T X D ←← 3R X D ←← 4R T S ← 5 6D S R 7 GND ←← 8 9 10 11 PE (HI-LE VEL) RCH 12 F A UL T 13 GND 14 F A UL T 15 mTXD 16 mRXD 17 18 19 20 DTR ←← 21 22 23 RESET 24 25 Cauti ons : 1.
iDP3410 User's M anual 26 CITIZEN 10.3 In put a nd O utput Si gnals 10.3.1 I nput and O u tput Si gnals (1) RXD Thi s is a se rial re cei v ed d ata sign al. When a fram ing erro r , o v errun erro r , or p arity error o ccurs , th at data is printed as " ?" .
iDP3410 User's M anual 27 CITIZEN (8 ) RCH When the printer is ready to r e ceiv e, this signal is turned to Space. This signal line is the same as DTR. (9) mTXD TXD signal fo r the diode g ate. (10) mRXD RXD signal for the diode g ate . (11) FG This is a Frame Ground signa l.
iDP3410 User's M anual 28 CITIZEN 10.3.2 Da ta Confi guration t Mar k b 0 , b 1 , b 2 , . ....... Space (1) (2) ( 3) (1) S tart Bit (2) Data Bit (+ Parity Bit) (3) S top B it (1 or M ore) (1) S t.
iDP3410 User's M anual 29 CITIZEN 10.3.3 Er ror Detectio n A pari ty erro r , fr amin g erro r , and o v err un erro r a re det ect ed. When an er ror is d ete cted , that d ata is st ored i n th e bu f f er as " ?". (1) F ramin g erro r This erro r results when a space is detected in detecting the stop bit.
iDP3410 User's M anual 30 CITIZEN 10.3.6 Elec trical Ch aracter istics (1) RS-232C circuit Input (RXD, DSR, mR XD) [Printer Sid e] [Host Side] Output (DTR, TX D, mTXD, R CH, R TS, F A UL T) Equiv.
iDP3410 User's M anual 31 CITIZEN 11. DRA WER KICK-OUT CONNECTOR AND PO WER CONNECT OR 11.1 Spec ificatio ns of Dr aw er Kic k-Out Connector (1) Dr a wer kick-out dri ve sign a l P ar alle l I nterface -- --- Can b e lear ned at the no.
iDP3410 User's M anual 32 CITIZEN 11.4 Spec ifica tions of P ower S uppl y Connec tor This is a po wer connector from a n e xclusiv e AC adapter . Connec tor ’ s Pin Con figurati o n No. Function 1 2 +24V GND 12 Jack used : HEC0470-01-64 0(HOSHIDEN ) or equi v a l ent Applicable plug : JXP series T ype-A (I.
iDP3410 User's M anual 33 CITIZEN 12. MAINTENANCE AND SER VIC E F or the information on maintenance and servic e, please contact our d ea ler or at the follo wing address. North ern Ame ric a Other Ar eas CB M Am eri ca Co rpor ation Japan CB M Co rpor atio n Service Ce nt e r Information Syste ms Division 36 3 V a n N e ss W a y C B M B l dg.
iDP3410 User's M anual 34 CITIZEN 13. PRINT CONTROL FUNCTIONS 13.1 CBM Mode 13.1.1 C ommand Li st Command Function Code P age 1 FF n n-line paper f eed 0CH n 36 2 SO Sp ecifyi ng th e do ubl e wi.
iDP3410 User's M anual 35 CITIZEN 13.1.2 De scripti on of I t ems XXXX ALL [Function] Command na m e [Code] A ro w of command constitue nt code is represented by a he xadecimal number with < >H, binary number with < >B, and a decimal number with < >.
iDP3410 User's M anual 36 CITIZEN De tails FF n [Function] n-line paper feed [Code] <0C>H n [Ran ge] 1 ≤ n ≤ 127 [Outline] This comm and feeds the pap e r by n-lines. Y ou can set n = 1 to 127 lines. If the print buf fer contains the data, use of this command fee ds th e pa p er by n-lines after printing th e data .
iDP3410 User's M anual 37 CITIZEN SI [Function] Canceling the double width character [Code] <0F >H [Outline] This c omm a nd cancels the double width characters set with SO. The data following this comma nd a re printed in the ordinary cha rac ter width.
iDP3410 User's M anual 38 CITIZEN DC3 [Function] Specif ying the re d print [Code] <13>H [Outline] This command specifies red-color characters. All the char a c t e rs in one line are printed in red by prefixing the pr int data with this command and sending it to the printer .
iDP3410 User's M anual 39 CITIZEN ESC "*" n1 n2 [Function] Specif ying the bit image mode [Code] <1B >H <2A> H n1 n2 [Ran ge] 1 ≤ n1 + 256 × n2 ≤ 378 [Outline] This c omm a nd allo ws printing in the bit ima g e mode.
iDP3410 User's M anual 40 CITIZEN ESC " 2 " [Function] Setting the 2/9- inch line feed width [Code] <1B>H < 32>H [Outline] This command sets the line f eed width to 2/9 inch.
iDP3410 User's M anual 41 CITIZEN ES C "N" n [Function] Specif ying the p e rforation skip [Code] <1B >H <4E> H n [Ran ge] 1 ≤ n ≤ 126 [Outline] This command feeds(Skips) the lines specified with n without p r inting. Ho wev er , you ca nnot spe c ify beyond th e length of one page.
iDP3410 User's M anual 42 CITIZEN ES C "t" n [Function] Selec ting the character code t a ble [Code] <1B >H <74>H n [Ran ge] 0 ≤ n ≤ 255 [Outline] This c omm a nd selects Page-n of Character Code T able . [Default] Depends upo n DIP switch setting.
iDP3410 User's M anual 43 CITIZEN ESC BEL n1 n2 [Function] Setting the ext e rnal de vice driv e pulse width [Code] <1B>H < 07>H n1 n2 [Ran ge] 1 ≤ n1 ≤ 127 1 ≤ n2 ≤ 127 [Outline] This command sets the po wer-on time to dri ve an ext e rnal de vice (Cash dra wer).
iDP3410 User's M anual 44 CITIZEN FS [Function] Driving command B dra wer-1 [Code] <1C>H [Outline] This comm and dri ves th e dra wer connector No.
iDP3410 User's M anual 45 CITIZEN ES C "R" n [Function] Sele cting the interna tional character set [Code] <1B >H <52>H n [Ran ge] 0 ≤ n ≤ 10 [Outline] This c omm a nd selects the interna tional characters according to the v alue of n.
iDP3410 User's M anual 46 CITIZEN ESC "&" <0> n1 n2 [m0 m1 ... m5 m6 m7 m8 m9] n2 - n1 + 1 [Function] Defining the Downlo a d character s et [Code] <1B>H < 26>H <00> H n1 n2 [m0 m1 .
iDP3410 User's M anual 47 CITIZEN ES C "%" n [Function] Specifying/Canceling the do wnloa d ch arac t e r set [Code] <IB>H <25>H n [Outline] This c omm a nd selects/dese l e cts the do wnload charac ter set.
iDP3410 User's M anual 48 CITIZEN ES C DC3 n [Function] Printing the me ssage [Code] <1B >H <13>H n [Ran ge] 1 ≤ n ≤ 10 [Function] This comm and prints a messag e . If the v alue of n is specifi ed beyond th e range, the messa ge will not be print e d.
iDP3410 User's M anual 49 CITIZEN ESC DC2 n1 n2 [Function] De leting the do wnload character , me ssage, bit image [Code] <1B>H < 12>H n1 n2 [Ran ge] 0 ≤ n1 ≤ 3 0 ≤ n2 (Specify .
iDP3410 User's M anual 50 CITIZEN GS "*" n1 n2 [d] n1 × n2 × 8 [Function] Defining the downlo a d, bit image [Code] <1D> H <2A>H <n1> <n2> [<d >] n1 × n2 × 8 [Ran ge] 1 ≤ n1 ≤ 45 0 ≤ n2 ≤ 24 Not e) T ak e ca re th at the n umbe r of d ata (n 1 × n2 × 8) is equal to or sma ll er than 2,048.
iDP3410 User's M anual 51 CITIZEN GS / m [Function] Printing the do wnloa d, bit image [Code] <1D> H <2F> H m [Ran ge] 0 ≤ m ≤ 255 [Outline] This c omm a nd prints the bit image sav ed in the number specified with m. [Caution] If the print bu ff e r cont a ins the data, this command will be ignored.
iDP3410 User's M anual 52 CITIZEN 13.2 ST AR Mo de 13.2.1 C ommand Li st Command Function Code P age 1 E SC R n S elect i ng th e i nt ernat i on al ch aracter s et 1BH 5 2H n 54 2 ESC 6 NOP 1BH .
iDP3410 User's M anual 53 CITIZEN Command Function Code P a ge 42 ESC BEL n1 n2 Setting the ext ernal de vice driv e pulse width 1BH 07H n1 n2 71 43 BEL D riving command A for d r a wer-1 07H 71 .
iDP3410 User's M anual 54 CITIZEN Details ES C “R” n [Function] Sele cting the interna tional character set [Code] <1B >H <52>H n [Ran ge] 0 ≤ n ≤ 10 [Outline] This c omm a nd selects the interna tional characters according to the v alue of n.
iDP3410 User's M anual 55 CITIZEN DC4 [Function] Canceling the double width character [Code] <14>H [Outline] This c ommand d e selects the double width characters se t with SO. Th e data following this comma nd will be printed in ordin ar y ch a racters.
iDP3410 User's M anual 56 CITIZEN ES C "-" n [Function] Specif ying/C a nceling the und e rline [Code] <1B >H <2D> H n [Outline] This c omm a nd selects/dese l e cts an underline. The underline is selec t e d at n = 1 an d des el ected at n = 0.
iDP3410 User's M anual 57 CITIZEN SI [Fu ncti on] Sp ecifyi ng the i n v erte d ch aract er [Code] <0F >H [Outline] This comm and selects and p r ints the in v e rted chara cte rs. Enter it a t the beginning of one line. O th e rwise, it w ill be in valid.
iDP3410 User's M anual 58 CITIZEN LF [Function] Printing and paper feed [Code] <0A> H [Outline] If the print bu ff e r c ont ains the data, this command will feed the line after pr inting. I f n ot, th e comm and on ly fe eds t he l ine. CR [Function] Printing [Code] <0D> H [Outline] This command prints the d a ta.
iDP3410 User's M anual 59 CITIZEN ES C "a" n [Function] Setting the n- line pape r feed [Code] <1B >H <61>H n [Ran ge] 1 ≤ n ≤ 127 [Outline] This command feeds the paper by the numb e r of lines specifie d with n. Y ou ca n se t n = 1 to 127 line s.
iDP3410 User's M anual 60 CITIZEN ES C "C" <0> n [Function] Setting the n- inch p a ge length [Code] <1B >H <43>H <0> n [Ran ge] 1 ≤ n ≤ 127 [Outline] This command sets the le n gth of one p a ge to n-inches.
iDP3410 User's M anual 61 CITIZEN ES C "B" [n]k NUL [Function] Setting the vertica l t ab position [Code] <1B >H <42>H [n]k <00 > [Ran ge] 1 ≤ n ≤ 255 1 ≤ k ≤ 16 [Outline] This command cancels the already set vertical tab positions and sets ne w ve rtic al tab positions.
iDP3410 User's M anual 62 CITIZEN ESC " O " [Function] Canceling the lo wer margin [Code] <1B>H < 4F>H [Outline] This c omm a nd deselects the set lowe r margin.
iDP3410 User's M anual 63 CITIZEN HT [Function] Horizontal tab [Code] <09>H [Outline] This command mov es a printing position to the preset next horizontal ta b position. T his comma nd will be ignor ed unle ss there is the next ho rizontal tab position.
iDP3410 User's M anual 64 CITIZEN ES C "D" [n] k NUL [Function] Setting the hor izontal t a b position [Code] <1B >H <44>H [n] k <00 >H [Ran ge] 1 ≤ n ≤ Ma x. pr int columns – 1 1 ≤ k ≤ 16 [Outline] This c omm a nd sets the horizontal tab positions.
iDP3410 User's M anual 65 CITIZEN ESC " 1 " [Function] Setting the 1/9- inch line feed width [Code] <1B>H < 31>H [Outline] This command sets the line f eed width to 1/9 inch.
iDP3410 User's M anual 66 CITIZEN ES C "K" n1 <0> m1 m2 .. . [Function] Specif ying the 8 - dot standard density bit image [Code] <1B>H < 4B>H n1 <00>H m1 m2 ... [Ran ge] 1 ≤ n1 ≤ 378/2 [Outline] This c ommand prints the bit image by the number of d a ta spec if ied with n1.
iDP3410 User's M anual 67 CITIZEN ESC "L " n1 n2 m1 m2 . . . [Function] Specif ying the 8 - dot doubl e density bit image [Code] <1B>H < 4C>H n1 n2 m1 m2 ... [Ran ge] 1 ≤ n1 + 256 × 2 ≤ 378 [Outline] This command prints the 8-dot doubl e de nsity (Half -dot print) bit image .
iDP3410 User's M anual 68 CITIZEN ES C "h" n [Function] Specif ying/C a nceling the doubl e he ight character [Code] <1B >H <68>H n [Outline] The d a ta following this command is printed in doubl e height characters, e xcept the bit image mod e < ESC> "K" and <ESC> "L".
iDP3410 User's M anual 69 CITIZEN ES C "& " <O> n1 n 2 m0 m1 m2 m3 m4 m5 m6 m 7 m8 m9 ] n2 - n1 + 1 [Function] Defining the downlo a d character set [Code] <1B>H < 26>H <00> H n1 n2 [m0 m1 .
iDP3410 User's M anual 70 CITIZEN ES C "%" n [Function] Specifying/Canceling the do wnloa d ch arac t e r set [Code] <1B >H <25>H n [Outline] This c omm a nd selects/dese l e cts the do wnload charac ter set.
iDP3410 User's M anual 71 CITIZEN ESC BEL n1 n2 [Function] Setting the ext e rnal de vice driv e pulse width [Code] <1B>H < 07>H n1 n2 [Ran ge] 1 ≤ n1 ≤ 127 1 ≤ n2 ≤ 127 [Outline] This command sets the po wer-on time to dri ve an ext e rnal de vice(Cash dra wer ).
iDP3410 User's M anual 72 CITIZEN FS [Function] Driving command B for dr awer- 1 [Code] <1C>H [Outline] This comm and dri ves the dr awer c onnector no.
iDP3410 User's M anual 73 CITIZEN CAN [Function] Canceling the print dat a [Code] <18>H [Outline] This command clears the input b uff er and print b uf fer . I n the STX -E XT mode of the serial inter face printer , the c ommand clea rs the data in the data bu ffer and e nds the STX -ETX mode.
iDP3410 User's M anual 74 CITIZEN ES C "U" n [Function] Sele cting the Unidirectional/Bidire ctional print mode [Code] <1B >H <55>H n [Ran ge] 0 ≤ n ≤ 255 [Outline] This c omm a nds selects or deselects unidirectional print.
iDP3410 User's M anual 75 CITIZEN ENQ [Function] Enquiry [Code] <05>H [Outline] This command is v alid only f or the seri a l interfa c e. The printer sends the status information. If this command is entered after receivin g the text infor m a tion in th e STX- ETX mode, the printer will send the status information and ch e ck byte.
iDP3410 User's M anual 76 CITIZEN STX [Function] T ext start [Code] <02>H [Outline] This command is v alid only f or the seri a l interfa c e. It effectuat es the STX-ETX mod e. ETX [Function] T ext end [Code] <03>H [Outline] This command is v alid only f or the seri a l interfa c e.
iDP3410 User's M anual 77 CITIZEN * ETX-S TX Mod e STX/ETX Mo de Start Sends ENQ Rec ei v es S tatu s Data Bu f fer Empty ? Sends STX Odd P ar ity Ch e ck ? Set s T est Byte T o FFH Set s T est B.
iDP3410 User's M anual 78 CITIZEN ES C "t" n [Function] Selec ting the character code t a ble [Code] <1B >H <74>H n [Ran ge] 0 ≤ n ≤ 255 [Outline] This c omm a nd selects Page-n of Character Code T able . [Default] Depends on DIP switch setting.
iDP3410 User's M anual 79 CITIZEN ES C "/" n "dat a" CR or LF [Function] Defining the message [Code] <1B>H < 2F>H n " data" CR or LF [Ran ge] 1 ≤ n ≤ 10 [Outline] This comm and can d efin e up to a 50 -byte message in on e line.
iDP3410 User's M anual 80 CITIZEN ESC DC2 n1 n2 [Function] De leting the do wnload character , me ssage, bit image [Code] <1B>H < 12>H n1 n2 [Ran ge] 0 ≤ n1 ≤ 3 0 ≤ n2 (Specify .
iDP3410 User's M anual 81 CITIZEN GS "*" n1 n2 [d] n1 × n2 × 8 [Function] Defining the downlo a d, bit image [Code] <1D> H <2A>H <n1> <n2> [<d >] n1 × n2 × 8 [Ran ge] 1 ≤ n1 ≤ 45 0 ≤ n2 ≤ 24 Note ) T ake care t h at th e nu mbe r of d ata(n 1 × n2 × 8) is equal to or sma ll er than 2,048.
iDP3410 User's M anual 82 CITIZEN GS / m [Function] Printing the do wnloa d, bit image [Code] <1D> H <2F> H m [Ran ge] 0 ≤ m ≤ 255 [Outline] This c omm a nd prints the bit image sav ed in the number specified with m. [Caution] If the print bu ff e r cont a ins the data, this command will be ignored.
iDP3410 User's M anual 83 CITIZEN 13.3 ESC /POS Commands 13.3.1 C ommand Li st Command Function Code P a ge 1 HT Horizonta l tab 09H 84 2 LF Printing and paper f eed 0AH 84 3 CR Printing 0DH 85 4.
iDP3410 User's M anual 84 CITIZEN Details HT [Function] Horizontal tab [Code] <09>H [Outline] This command mov es a printing position to the next hori zonta l t a b position. If the next horizontal tab position is not set, this command will be ignored.
iDP3410 User's M anual 85 CITIZEN CR [Function] Printing [Code] <0D> H [Outline] This command prints the d a ta. If the DIP switch se gme nts 1 to 6 are set to OFF , the printer will print the data in the print b uff er and feed the pap e r by on e line.
iDP3410 User's M anual 86 CITIZEN ES C "!" n [Function] Setting the pr int mode b a tch [Code] <1B >H <21>H n [Ran ge] 0 ≤ n ≤ 255 [Outline] Sets the pr int mode.
iDP3410 User's M anual 87 CITIZEN ES C "%" n [Function] Specifying/Canceling the do wnloa d ch arac t e r set [Code] <1B >H <25>H n [Ran ge] 0 ≤ n ≤ 255 [Outline] This c omm a nd selects/dese l e cts the do wnload charac ter set.
iDP3410 User's M anual 88 CITIZEN ESC "& " s n m [a [p] s × a]m - n + 1 [Function] Defining the downlo a d character set [Code] <1B>H < 26>H s n m [ a[ p] ... < ps × a>] m - n + 1 [Ran ge] s = 2 32 ≤ n ≤ m ≤ 255 0 ≤ a ≤ 9 0 ≤ p1 .
iDP3410 User's M anual 89 CITIZEN ESC "*" m n1 n2 [d] n1 + 256 × n2 [Function] Specif ying the bit image mode [Code] <1B>H < 2A>H m n1 n2 [d] n1 + 256 × 2 [Range] m = 0, 1.
iDP3410 User's M anual 90 CITIZEN ESC " 2 " [Function] Setting the 1/6- inch line feed width [Code] <1B>H < 32>H [Outline] This command sets the line f eed width to 1/6 inch.
iDP3410 User's M anual 91 CITIZEN ES C "D" [n]k NUL [Function] Setting the H orizont a l tab position [Code] <1B >H <44>H [n]k <00 >H [Ran ge] 1 ≤ n ≤ 255 0 ≤ k ≤ 32 [Outline] This comm and sets th e horizont a l ta b position.
iDP3410 User's M anual 92 CITIZEN ES C "R" n [Function] Sele cting the interna tional character set [Code] <1B >H <52>H n [Ran ge] 0 ≤ n ≤ 10 [Outline] This c omm a nd selects the interna tional characters according to the v alue of n.
iDP3410 User's M anual 93 CITIZEN ES C "U" n [Function] Specif ying/C a nceling the Unidirectional print mode [Code] <1B>H < 55>H [Ran ge] 0 ≤ n ≤ 255 [Outline] This command se l e cts/deselects unidi rec tional p rint. n is valid only for the least significant bit.
iDP3410 User's M anual 94 CITIZEN ES C "c" "5" n [Function] Sele cting the panel switch enab l e /disable [Code] <1B >H <63>H <35>H n [Ran ge] 0 ≤ n ≤ 255 [Outline] This command enables/disa bl e s the panel switc hes.
iDP3410 User's M anual 95 CITIZEN ESC "p" m n1 n2 [Function] Specif ying the puls e generation [Code] <1B>H < 70>H m n1 n2 [Ran ge] 0 ≤ m ≤ 1 0 ≤ n1 ≤ n2 ≤ 255 [Outline] This command outputs the signals specified with n1 a nd n2 to th e connector pins.
iDP3410 User's M anual 96 CITIZEN ES C "r" n [Function] Selec ting the printing color [Code] <1B >H <72>H n [Range] n = 0, 1 [Outline] This command selects a print color for each line. Setting n = 0 selects black. Setting n = 1 selects red.
iDP3410 User's M anual 97 CITIZEN ES C "u" n [Function] Sending the status for periph eral de vice [Code] <1B >H <75>H n [Ran ge] n = 0 [Outline] This commands sends the st atus of the connector no. 3 pin. n Connector Pin 0 D ra wer kic k -out connector No.
iDP3410 User's M anual 98 CITIZEN ESC " v " [Function] Sending the printer status [Code] <1B>H < 76>H [Outline] This c omm a nd sends the printer status. [Caution] Th is command is v alid only f or the serial interfa c e. The f ollo wing table lists the sta tus sent.
iDP3410 User's M anual 99 CITIZEN ES C "{ " n [Function] Specif ying/C a nceling the in verted character print [Code] <1B >H <7B>H n [Ran ge] 0 ≤ n ≤ 255 [Outline] This c omm a nd selects/dese l e cts in v er ted print. n is v alid only for the least signif icant bit.
iDP3410 User's M anual 100 CITIZEN ES C DC3 n [Function] Printing the me ssage [Code] <1B >H <13>H n [Ran ge] 1 ≤ n ≤ 10 [Function] This comm and prints a messag e . If the v alue of n is specifi ed beyond the range, th e messa ge will not be print e d.
iDP3410 User's M anual 101 CITIZEN ESC DC2 n1 n2 [Function] De leting the do wnload character , me ssage, bit image [Code] <1B>H < 12>H n1 n2 [Ran ge] 0 ≤ n1 ≤ 3 0 ≤ n2 (Specify.
iDP3410 User's M anual 102 CITIZEN GS "*" n1 n2 [d] n1 × n2 × 8 [Function] Defining the downlo a d, bit image [Code] <1D> H <2A>H <n1> <n2> [<d >] n1 × n2 × 8 [Ran ge] 1 ≤ n1 ≤ 45 0 ≤ n2 ≤ 24 Not e) T ak e ca re th at the n umbe r of d ata(n 1 × n2 × 8) is equal to or sma ll er than 2,048.
iDP3410 User's M anual 103 CITIZEN GS / m [Function] Printing the do wnloa d, bit image [Code] <1D> H <2F> H m [Ran ge] 0 ≤ m ≤ 255 [Outline] This c omm a nd prints the bit image sav ed in the number specified with m. [Caution] If the print bu ff e r cont a ins the data, this command will be ignored.
iDP3410 User's M anual 104 CITIZEN 14. CHARA CT ER CODES T ABLE 14.1 CBM (Domesti c).
iDP3410 User's M anual 105 CITIZEN 14.2 CBM (Inter nationa l).
iDP3410 User's M anual 106 CITIZEN 14.3 ST AR (D omesti c).
iDP3410 User's M anual 107 CITIZEN 14.4 ST AR (In ternati onal).
iDP3410 User's M anual 108 CITIZEN 14.5 Co de P a g e 437.
iDP3410 User's M anual 109 CITIZEN 14.6 Kat akana.
iDP3410 User's M anual 110 CITIZEN 14.7 Co de P a g e 850.
iDP3410 User's M anual 111 CITIZEN 14.8 Co de P a g e 860.
iDP3410 User's M anual 112 CITIZEN 14.9 Co de P a g e 863.
iDP3410 User's M anual 113 CITIZEN 14.10 Co de P a ge 865.
iDP3410 User's M anual 114 CITIZEN 14.11 Co de P a ge 852.
iDP3410 User's M anual 115 CITIZEN 14.12 Co de P a ge 866.
iDP3410 User's M anual 116 CITIZEN 14.13 Co de P a ge 857.
iDP3410 User's M anual 117 CITIZEN 14.14 Win dow s Code.
iDP3410 User's M anual 118 CITIZEN 14.15 I nternatio nal Character Codes T able.
iDP3410 User's M anual 119 CITIZEN APPENDI X 1. BLOCK DIA GRAM RO M RAM OSC 16MHz PO W ER L ED ERR OR LED FEED S witch Dra wer P a ra llel (CENTR O NICS Base d) Ser ia l (RS-232C Bas ed) AC A d a p t e r 34 AD Se ries (26V DC, 1.
iDP3410 User's M anual 120 CITIZEN APPENDI X 2. OUT LINE DRA WING.
iDP3410 User's M anual 121 CITIZEN <<<Ge r man> >>.
iDP3410 User's M anual 122 CITIZEN <VORSICHT> 1. Bitte le sen Sie di e B e di e nungs anleitung vor dem Bet rie b d es Geräts auf m e rks a m durch u nd be wahren Sie die Anleitung anschließend für sp ä teres Nachschlagen an ein e m sicheren Platz auf.
iDP3410 User's M anual 123 CITIZEN ZU BE ACHTENDE SICHERHEIT SMASSRE GELN Zur V er mei dung v o n Gef ahre n g e genübe r dem Be die ner und ande re n P e r sone n und Sac hsc häde n si nd die folg e nden V or s icht sm aßrege ln unbe ding t z u be ac hte n.
iDP3410 User's M anual 124 CITIZEN WARNUNG Beim Betrieb des Gerä ts sind die nachf olgende n V or sichtsma ßregeln unbedingt zu b eachten. Eine Mißac htung dieser Hinweise ka nn zu Schäden, Funktionsstörunge n, Rauchentwic klung und Brandgefahr durch Über hitze n und zu elektr ische n Schlä gen f ühren.
iDP3410 User's M anual 125 CITIZEN VORSICHTSMASSRE GEL N F ÜR DIE AUFSTEL LUNG • Das Ger ät n ich t an P lätz en ab st ellen od er betr eiben , an den en es Feu er , Feu chtig ke it od er dire kt er Sonnenbestr ahlung ausges etzt i st.
iDP3410 User's M anual 126 CITIZEN V ORSICHTSMAS SREGELN FÜR DIE HANDHABUNG Zur V erme idu ng von P roblemen sind bei der Handh a b ung des Geräts die folgenden V orsichtsmaßregeln zu beachten. • Für die Stro mve rsorgung ausschließlich das v orgeschriebene Netzteil verw e nden.
iDP3410 User's M anual 127 CITIZEN TÄGLI CHE W AR TUNG • V or der W ar tung zu er st den Dru c ker ausschalten. • Schmutz und Staub mit einem trocken en, weic hen T uch vom D ruc ke rgehäuse abwischen. Bei starker V erschmutzung ein e n Lapp e n in W asser anfeuchten, auswringen und d amit a bwischen.
iDP3410 User's M anual 128 CITIZEN 4. BETRIEB 4.1 Ansc hluß des Netzt eils 1. Den Netzschalte r drück en. 2. Den Kabelstecker de s Net zte ils an die Net za nschlußb uchse an der Rückwand d e s Drucke rs anschließen.
iDP3410 User's M anual 129 CITIZEN 4.2 Ansc hluß des S chnit tstellenkab els 1. Den Druck er (e inschließlich a ngeschloss ene Gerät e) aussch alten. 2. Den Kabe lstecker korrekt ausgeri chtet (Ob er- u nd Unters eite prüf en) an die Schn ittstellenb uchse anschließ en.
iDP3410 User's M anual 130 CITIZEN 4.4 Einse tzen de r Far bban dkassett e 1. Die Druckerabdeckun g aufklappen. 2. Bei sc hlaf f em Fa rbband den Knop f in Pfeilric htung dr ehe n, um das Ba nd v or dem Einsetzen der Kassette straf f zu wickeln. 3.
iDP3410 User's M anual 131 CITIZEN 4.5 Einle g en d er P apierr olle 1. Mit den Fingern in die Aussparungen an b e iden Seiten der Dru ckerabdeckung g re ifen, u nd die Abdeckung durch Anheben bis zum Anschlag öf f n e n. 2. Das Ende des Dru ckpa piers in nah ezu rechtem W ink el a bschn eide n.
iDP3410 User's M anual 132 CITIZEN VO R S I C H T : • Schlaffes Dr uckpapier durch Zurü ckdrehen der Papi errolle straff en. • Bei schräg eingesetztem Druckpapi er d en Papi er-Freigab ehebels drück e n und d as P apie r gerade richten.
iDP3410 User's M anual 133 CITIZEN 4.6 Entf er nen des restli c he n Druc k papi er s 1. Die Druckerabdeckun g aufklappen. 2. Den Papier - Freigabehebel in Pfeilrichtung drücken und d a s Rollenpapier herausziehen.
iDP3410 User's M anual 134 CITIZEN 4.8 Bedi enfel d und Fehler anzeigelämpc hen 1. Net zan zeig elämp chen (grü n) (PO WER ) Leuchtet bei eingeschalteter Net zversorgun g.
iDP3410 User's M anual 135 CITIZEN 4.9 Betr ieb sfluß beim Einsc halte n "Puf ferd at en löschen" Ja (FEED S W) und ver größert er Rot-Dru ck Feed SW ? Puff er date n FEED SW ? (FOR TSETZEN) 1 Sek.
iDP3410 User's M anual 136 CITIZEN 5. DIP-SCHAL TER-EINSTELL UNG 5.1 La ge der DIP-S chalter (1) Bet riebss tr om au ss ch alten . (2) Ein Ka ss e ttenband entfernen. Die DIP-Schalter lieg en, wie in der Ab bildung gezeigt. (Nur DS 1 f ür P a ralle l-Schnittstelle v orhanden.
iD P 3410 Us e r's M a n u a l 137 CITI Z EN 5.2 DI P - S c hal t e r - E ins t ell u ngen 1 ) D I P - S c h a lter 1 No. Funktion ON OFF B e i A u sl i e f e r un g a b W e r k D S 1-1 A ut o m .
iDP3410 User's M anual 138 CITIZEN 2) D I P-Sc ha lter 2 No. Funktion ON OFF W er k ss ei ti ge Ei ns t el l u n g DS2-1 Bitlänge 8 Bit 7 Bit ON DS 2-2 P arität Nei n Ja ON DS2-3 Ungerade/G era.
iDP3410 User's M anual 139 CITIZEN 6. EINST ELLUNG DER V OR W AHL-JUM PERSTECKER 6.1 Lage der V orwahl -J umper stec ker (1) Bet riebss tr om au ss ch alten . (2) Ein Ka ssettenband entfer nen. (3) Die Oberabd eckung entfernen. Der V o rwahl-Jumpersteck e r lie gt, wie in der Abbildung unte n gezeigt.
iDP3410 User's M anual 140 CITIZEN 7. MET HODE FÜR M O DUSEINSTELL UNG Dieser D rucker hat die Modi CBM, S T AR und ESC/ POS. Jeder ge wünscht e Modus kann ge wählt und nach Bedarf einge st ellt werden.
iDP3410 User's M anual 141 CITIZEN 12. W AR TUNG UND DIENST Bitte we nd en Sie s ic h an die fol genden Stellen fü r weite rgehend e In for mat io nen. Nordame rika Andere Gebiete CB M Am eri ca Co rpor ation Japan CBM Co rpor atio n Service Ce nt e r Inf ormation Systems Di vision 36 3 V a n N e ss W a y CB M B l dg.
Information Systems Division CBM Bldg., 5-68-10, Nakano, Nakano-ku, T oky o 164-0001, Japan Head Office T el: (+81- 3) 5345-7540 F ax: (+81- 3) 5345-7541 02-981210-0500-0472-0160-1500 Printed in Japan.
デバイスEpson iDP3410の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Epson iDP3410をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはEpson iDP3410の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Epson iDP3410の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Epson iDP3410で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Epson iDP3410を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はEpson iDP3410の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Epson iDP3410に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちEpson iDP3410デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。