EpsonメーカーM00002112の使用説明書/サービス説明書
ページ先へ移動 of 72
Install Manual Advanced Printer Driver V er .4 An overview of the APD and the description of operating environment. Descriptions from installation of the APD to making prints with the TM printer.
2 Cautions • No part of this document m ay be reproduced, stored in a retriev al system, or tr ansmitted in any f orm or by any means, electronic, mechanical, photocop ying, recordin g, or othe rwise, without the prior written per mission of Seiko Epson Cor por ation.
3 For Saf ety K e y to Symbols The symbols in this manual are identified by their le vel of importance, as defined below . Read the following carefully before handling the product.
4 About this Manual Aim of the Manual This manual is aimed to provide the necessary information to install the EPSON TM printer driver and Customer display (Adv anced Printer Driver).
5 Contents ■ For Safety ............. ................ .............. ................. ................. .............. ................. ......... ........ .. 3 Ke y to Symbols .......... ........ ........ ........ ........ ........... ........ ..
6 ■ Uninstallation ......... .............. ................. .............. ................. ................ .............. ............ ..... 30 ■ When connecting Customer Display to TM printer ............... ................. ...............
Chapter 1 Overview 7 1 Ov er vie w Intr oduction Adv anced Printer Driv er (hereafter called APD) is a Wind o ws printer driver for EPSON TM printers and Customer Displays.
8 Manual org anization Install Manual This manual. Descriptions of the procedures from installing the APD to performing test print, adding printer drivers, and the silent install which is an automated APD installation.
Chapter 1 Overview 9 1 Oper ating En vir onment Computer Any PC/A T compatible machine running any of the following Win d ow s systems.
10 .NET Fr ame w or k V er sion For .NET environment, use in the following environment. •. N E T Framework 2.0 or later . •F o r Wi n d ow s Vis t a , .NET Framework 3.0 or later is installed.
Chapter 1 Overview 11 1 Suppor ted Models APD 4.xx supports the following models. DM-D10X/20X DM-D110/210 DM-D500 TM-C100 TM-H2000 TM-H5000II TM-H5200 TM-H6000II TM-H6000III TM-H60.
12 Connection P a tter n When connecting the Customer Displays or the Cash Draw er s to the TM pr inter s . The connection patterns shown below are av ailable depending on the TM printer interface.
Chapter 1 Overview 13 1 Connecting ca ble For the Serial connection, use a cable configured as follows. If you use a connection with in terface conve rsion connector o r interface e xpanded board, the operation is not guaran teed.
14 Dif f erences Depending on the OS The content of th e descriptions of some operations in this book may be different depending on the OS. See the following. Item Description Screens shown Screens in Windows Vista are used f or the descr iptions in this ma nual.
Chapter 1 Overview 15 1 Restr ictions •T h e APD cannot coexist with OP OS on a computer at the same time.
16 Manuals/Sample Pr ogr ams Manuals and sample programs are provided in a package separate from the APD. Installation Follow the procedures below to install the manuals and sample programs.
Chapter 1 Overview 17 1 Uninstallation Follow the procedures below to uninstall manuals and sample programs. 1 Select fr om [Star t]-[Control P anel] and open [Uninstall a progr am]. ( Ref erence page of other OS.
18.
Chapter 2 Installation and Setup 19 2 Installation and Setup This chapter describes the procedures from the installation to execut ion of test print.
20 Installation methods The following methods are av ailable to install the APD. • Standard Installation page 21 This is a standard method to install the APD.
Chapter 2 Installation and Setup 21 2 Standard Install This is a standard method to install the APD. Under normal conditions, use this method. For the APD of ver si o n 4.
22 3 The “License Agreement” screen appear s . Read the content and select "I accept the ter ms of the license agreement". Then click the [Next] button. 4 The “Setup T ype” screen appear s . Select "Standard", then click the [Next] button.
Chapter 2 Installation and Setup 23 2 6 The “ Add Pr inter” screen a ppear s . Conf igure the pr inter dr iver and port to use, and click the [Next] button. 7 The “P arallel P or t Settings” screen a ppear s . Configure the settings of the Par allel por t and click the [Next ] button.
24 8 The “Ser ial P or t Settings” screen appe ar s . Conf igure t he settings of the Serial por t and click the [Nex t] button. Proceed to Step 10. 9 The “Ether net Settings” screen appear s. Conf igure the IP Address of the TM printer and click the [Next ] button.
Chapter 2 Installation and Setup 25 2 10 The display returns to t he “Pr inter Conf igur ation” screen. All the printer dr iv er s , conf igured betw een Step 6 to Step 9, appear in the list. T o install m ultiple printer dr ivers , repe at Step 5 to Step 9.
26 12 The APD is installed. 13 The “InstallShield Wizard Complete” sc reen appear s . Click the [Finish] button to f inish installation. 14 When printer dr ivers are added at St ep 5, confirm that the pr inter drivers are installed in [Hardware and Sound] - [Printer s] from [Start] - [Contr ol Panel] ( Ref erence page of other OS.
Chapter 2 Installation and Setup 27 2 Connecting the TM Pr inter Before connecting the TM printer , set the Handshaking setting of the printer to ʺ Receive buffer full ʺ . Connect the TM printer .
28 USB connection Do not connect the TM printer to the computer before installing the APD. In case you connect the TM printe.
Chapter 2 Installation and Setup 29 2 Print T est Page After installing the APD, execute test print to check if the APD is properly installed and work normally . Pe r f o r m Print Te s t Pag e in the following procedures.
30 Uninstallation Uninstall everything related to APD (port driv ers, printer drivers, and so on). Follow the procedure below to uninstall the APD. 1 End all the other oper ations on the computer .
Chapter 2 Installation and Setup 31 2 6 The “Uninstall Complete” screen a ppear s . Click the [Finish] button to f inish uninstallation..
32 When connecting Customer Display to TM pr inter This section explains how to install the APD when connecting a Customer Display to a TM printer . For the APD of ver s i o n 4.
Chapter 2 Installation and Setup 33 2 Follow the procedure below . 1 Double click the [APD] icon and start the installation. 2 The Install ShieldWizard screen ap pear s . Click the [Next] button. 3 The “License Agreement screen” appe ar s .
34 7 The “Ser ial P or t Settings” screen appe ar s . Conf igure t he settings of the Serial por t and click the [Next] button. 8 The display returns to the “Pr inter C onfigur ation” screen. Click the [Add] button to add a printer dr iv er f or the TM printer .
Chapter 2 Installation and Setup 35 2 9 The “ Add Printer” screen a ppear s .Fir st select a pr inter dr iver to use f or the TM printer . Then, select the P ort T ype setting same as that f or the Customer Display made at Step 6 to 7 (example: "Connect to EPSON DM-D50X 32x4"), and clic k the [Next] button.
36 12 The APD is installed. 13 The “InstallShield Wizard Complete” sc reen appear s . Click the [Finish] button to f inish installation. 14 In [Start] - [Control Panel] - [Har dw are and Sound] - [Printer s] ( Reference page of other OS. ), chec k that the specified printer dr iver and Customer Display driv er are correctly installed.
Chapter 2 Installation and Setup 37 2 Follow the procedure below . 1 Double click the [APD] icon and start the installation. 2 The Install ShieldWizard screen ap pear s . Click the [Next] button. 3 The “License Agreement” screen appear s .
38 7 The “Ser ial P or t Settings” screen appe ar s . Conf igure t he settings of the Serial por t and click the [Next] button. 8 The display returns to the “Pr inter C onfigur ation” screen. Click the [Add] button to add a printer dr iver f or the Customer Display .
Chapter 2 Installation and Setup 39 2 10 The display retur ns to the “Pr inter Configur ation” screen. Click the [Next] button. 11 The “Start Copying Files” screen appe ar s . See "Current Settings" to conf irm the installation settings a nd then click the [Next] button.
40 Connecting the de vices Confirm the following before connecting device s (T M printer , Customer Display) •S e t the Handshaking setting of the printer to ʺ Receive buffer full ʺ .
Chapter 2 Installation and Setup 41 2 T est print/display Use the following print and display tests to check if the APD is properly installed and functions normally .
42 Plug and Play Using Wi n do w s Plug and Play function, a printer driv er can be easily installed on a computer on which the APD is already installed.
Chapter 2 Installation and Setup 43 2 Connecting the TM Pr inter Connect the TM printer following the procedure below . 1 Check that “Receiv e buf fer full” is set as a busy condition of the printer . 2 Connect the TM printer .
44 Custom Install The custom installation allows you to install the APD with specified port drivers and tools. Use this method when yo u do not wa n t to install unnecessary port drivers or tools.
Chapter 2 Installation and Setup 45 2 4 The “Setup T ype” screen appear s . T hen select "Custom" and click the [Next] button. 5 The “Select Featur es” screen appear s . Select the features of the APD y ou w ant to install, and then click the [Next] button.
46 6 The “Local port suppor t” screen a p pe ar s . Select the por t dr iver to be installed and then click the [Next] button. For Serial or Ether net interf a ce, do not select any printer dr iver and clic k [Next] button. 7 The “Pr inter Conf igur ation” screen appear s .
Chapter 2 Installation and Setup 47 2 9 The “P arallel P or t Settings” screen a ppear s . Configure the settings of the Par allel por t and click the [Next ] button. Proceed to Step 12. 10 The “Serial P or t Settings” screen a ppe ar s . Conf igure the settings of the Serial por t and click the [Next ] button.
48 13 The “Start Copying Files” screen appe ar s . See "Current Settings" to conf irm the settings to be installed and then click the [Next] button. 14 The APD is installed. 15 The “InstallShield Wizard Complete” screen appear s . When y ou click the [Finish] button, the installation ends.
Chapter 2 Installation and Setup 49 2 Shared Pr inter APD4 supports shared printer (Point&Print). This section describes how to instal l a shared printer into a client computer . The uninstallation procedure is also provided.
50 Follow the procedures below to install the shared printer on the client computer . 1 Fr om [Star t] - [Control P anel] - [H ardw are and Sound], select [Add a printer]. ( Reference page of other OS. ) 2 The "Choose a local or netw ork pr inter" screen a ppear s .
Chapter 2 Installation and Setup 51 2 5 Click the [Print a test page] button to check if the printer functions nor mally . 6 The f ollowing screen appear s . If the test pr int was output correctly , clic k the [Close] button. If the test print was not output corr ectly , click the [T r oubleshoot.
52 Uninstallation This section describes how to uninstall a shared printer from a client computer . • Uninstall the shared printer page .
Chapter 2 Installation and Setup 53 2 Uninstalling the APD Follow the procedures below to uninstall the APD. 1 Uninstall all the shared printer s . See "Uninstalling the shared pr inter" on page 52. 2 From [Start] - [Contr ol Panel] - [Har dw are and Sound], select [Pr inters].
54 5 The “Remo v e Dr iver And P ackage” screen a ppear s . Select “Remo v e driver only , ” and click the [OK] button. For W indows XP , the screen in Step 5 does not appear . Go to Step 6. 6 The “Print Ser ver Pr oper ties” screen a ppear s .
Chapter 2 Installation and Setup 55 2 Maintenance after Installing the APD Maintenance procedures after the APD is installed. • Adding the printer driver .
56 4 The “Local P ort Suppor t” screen a ppe ar s . Select the port dr iver to be installed and then click the [Next] button. For Serial or Ether net interf a ce, do not select any printer dr iver and clic k [Next] button. 5 The “Pr inter Conf igur ation” screen appear s .
Chapter 2 Installation and Setup 57 2 8 The “Ser ial P or t Settings” screen appe ar s . Conf igure t he settings of the Serial por t and click the [Next] button. Proceed to Step 10. 9 The “Ether net Settings” screen appear s. Conf igure the IP Address of the TM printer and click the [Next ] button.
58 Uninstalling the printer dr iver Follow the procedures below to uninstall the printer driver . 1 Select fr om [Star t] - [All Progr ams] - [EPSON] - [EPSON Adv anced Pr inter Driver 4] and open [Cha nge or delete APD4, or cr eate a silent installer f or APD4.
Chapter 2 Installation and Setup 59 2 7 The display retur ns to the “Pr inter C onf igur ation” screen. Click the [Next] button. 8 The “Start Copying Files” screen appear s . Conf ir m the pr inter dr iver to be remo v ed which is displayed in "Cur rent Settings" and then clic k the [Next] button.
60 Changing the port settings of the pr inter dr iver Change the port setting of the printer driver to ma tch the communication setting of the printer .
Chapter 2 Installation and Setup 61 2 Upgrade Install of the APD Follow the procedures below to perform upgrade installation of the APD of the new ver si o n. 1 Double-click the APD icon to start the installation.
62 6 The upgrade installation of the APD starts . 7 The “Upgrade Complete” scr een appear s . Click the [Finish] button to complete the upgr ade installation.
Chapter 3 Silent Installation 63 3 Silent Installation This chapter describes the procedures for the Silent Installation.
64 Flo w of the Silent Installation The flow of the silent installation is describ ed below . Setting the APD En vir onment T o Be Copied Create the APD environment for the silent installation on the copy so urce computer .
Chapter 3 Silent Installation 65 3 APD Setting When copying the user setting or system setting of the printer , see the “ TM/BA/E U Printer Manual ” to make settings.
66 Creating a P a c kage or Scr ipt f ile Create the silent installation package or the scr ipt file for the silent installation. First, confirm which APD environment to copy on the copy source computer .
Chapter 3 Silent Installation 67 3 4 The “Silent Installation” screen appear s . Select the setting you w ant to copy fr om [Pr inter Configur ation], a nd select the pr inter to be installed.
68 6 The "Rename Printer" screen a ppear s . Change the printer dr iver name, and click the [Next] button. 7 The “Start Creating Silent Installat ion Scr ipt File” screen a ppear s .
Chapter 3 Silent Installation 69 3 Executing the Silent Installation Yo u can execu te the silent installation using the following methods. Execute the silent installation package on the copy destination computer .
70 Checking the Installation Result The silent installation results of the silent installation pa ckage/scri pt file for the silent installation can be checked in the “Result Code” of “setup.
Chapter 3 Silent Installation 71 3 /uninstall : Silent Uninstallation Using this command option en ables yo u to uninstall us ing the command line.
72 /r : Restar t setting after the installation Using this command option enables you to make the restart setting of OS after the silent installation is completed. Example when you w ant to restar t Pac kage File D:APD4Apd4Silent.
デバイスEpson M00002112の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Epson M00002112をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはEpson M00002112の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Epson M00002112の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Epson M00002112で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Epson M00002112を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はEpson M00002112の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Epson M00002112に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちEpson M00002112デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。