EpsonメーカーP-0082の使用説明書/サービス説明書
ページ先へ移動 of 20
EPSON AMeRIc& INC. EPSON Product Support Bulletin Subject: Understanding and Using ESCP/2 Commands and Syntax Date: 12/4/91 Page(s): 1 of 14 PSB No: P-0082 Originator: JW This bulletin provides de.
PSB No: P-0082 Page: 2 of 14 ESC X m n1 n2 (Select Pitch and Point Size) C X m n1 a is the command for selecting pitch and point size where m, nl and n2 are variables.
PSB No: P-0082 Page: 3 of 14 10 INPUT “Point Siie”;A$ 20 B=VAL(A$)*2 21 RESTORE 70 22FORX=l TO16 23READY 24 IF B=Y THEN GOT0 30 25NMTX 26CLS 27 PRINT A$ ” is not a valid point size choice.
PSB No: P-0082 Page: 4 of 14 These are 8 point characters These are 10 point characters These are 10.5 point characters These are 12 point characters These are 14 point characters These are 16 point c.
PSB No: P-0082 Page: 5 of 14 ESC ( C m1 m2 n1 n2 (Set Page Length in Defined Units II ESC ( C ml m2 nl n2 is the command for setting the page length in units where ml, m2, nl and n2 are variables. The “uniV’ is usually l/380 of an inch unless defined othenwise by the “ESC ( l.
PSB No: P-0082 Page: 6 of 14 1 ESC ( v m1 m2 n1 n2 (Set Relative Verticai~~~ ESC l v ml m2 nl a is the command for advancing the print position verticaiiy in unitswhereml,m2nl andn2arevariables. The5nCisusually1/36Oofaninch unless defined otherwise by the “ESC ( U command.
PSB No: P-0082 Page: 7 of 14 EXAMPLE 1. The desired distance is l/4 inch. 2. 1/4x 360 = 90 3. 90 divided by 25 6 = 0 wit h a remainde r o f 90. 4. 2%90=166 5.
PSB No: P-0082 Page: 8 of 14 C f V m1 m2 n1 a is the command for changing the print position vertically (with respect to the Top of Form position) in units where ml, m2, nl and n2 are variables. TheZlnit”isuswllyl/~afaninchunlessdefinedatherwisebythe”ESC(U command.
PSB No: P-0082 Page: 9 of 14 ESC t n is the command for selecting a character table to be used for printing where n is a variable. The following table lists the values for n and the character table associated with the value. II n I Table II II 3 I PC437 (US) II Table 1 NOTE: 1.
PSB No: P-0082 Page: 10 of 14 ESC ( t nl n2 dl .d2 d3 (Assign Character Tabie) ESC f t nl n7 dl d2 d3 is the command for assigning character tables where n1, n2, dl,d2,andd3arevariables. CurrenUy,variabknl,n2andd3MlJSTbenl=3, n2=0, and d3=0. Variable dl is a number corresponding to one of the four tables selectable with the ESC t n command.
PSB No: P-0082 Page: 11 of 14 page contains a print sample of the Registered Tables available in printers sold in the U.S. In order to print the first 31 characters in Tables 1 through 9, the ESC ( h command must be sent.
PSB No: P-0082 Page: 12 of 14 60 If the Registered Character Table number is not 0, print ASCII values 1 through 255 inclusive. Remember, line 70 allows the first 31 ASCII values to print as characters, not control codas. 90 If the Registered Character Table number is ndt 0, do not exacute commands in lines 100 and 110.
PSB No: P-0082 Page: 13 of 14 able 0 Italic ‘#$X& ()*+,- ./0123456789:;c=>?~ABCDEFGHIJKLMNOPQRSTU~YZ~~n-fabcdefghijklm >pqrstuvwxyz( :}‘!“#$X&‘()*+,-./0123456789:; e=> ?BABCDEFGHI JKLMNOPQRSTUVRXYZ[ J ^, nbcdefghijklmnopqrstuvwxyz{,‘}- sble 1 PC437 (us) D~~~~*no08~bOnu,4I?(~-~tl~~~~A !“#SX&‘()*+,-.
PSB No: P-0082 Page: 14 of 14 C l h n1 n2 d, . . . dk is the command for printing control codes as data where nl and n2 are variables and d, . ..d,representthedat&atistobeprintedas characbrs. The variables nl and n2 tell the printer Yhe next xx ASCII codes are to be interpreted as characters instead of control codes”.
EPSON AMERICA, INC. EPSON Product Support Bulletin Subject: LQ-870/1170 Questions and Answers Date: 10/9/91 Page(s): 1 of 4 PSB No: P-0081 Originator: SDS This bulletin answers some commonly asked questions about the LQ-870/1170 printers. The questions and answers are listed below.
PSB No: P-0081 Page: 2 of 4 Q5. Are there different tractors available for the LQ-870 and LQ-1170 printer? A5. The LQ-870 and LQ-1170 printers come with one tractor, this tractor can be positioned for three different purposes.
PSB No: P-0081 Page: 3 of 4 Font I 10 cpi I 12 cpi I 15 cpi I PS Epson Draft Epson Roman 0 0 l 0 0 a 0 Epson Sans Serif Epson Courier Epson Prestige Epson Script OCR-B Epson Script C Epson Orator Epson Orator-S l l Q9. There was a diskette included in the box with my printer, what is it for? A9.
PSB No: P-0081 Page: 4 of 4 Q10. What printers are supported by the printer drivers on the diskette? A10. All drivers on the diskette support the following Epson printers: 0 LQ-570 0 LQ-1070 0 LQ-870 0 LQ-1170 0 AP-5000 0 AP-5500 Q11. What are the available accessories for the LQ-870 and LQ-1170 printers? A11.
EPSON AMERICA INC. EPSON Product Support Bulletin Subject: Quick Reference for Current Dot-Matrix Printer Print Speeds Date: 10/9/92 Page(s): 1 of 1 PSB No: P-0030C Originator: SLS 9-PIN PRINTERS / 1%.
EPSON AMERICA, I NC. EPSON Product Support Bulletin Subject: Quick Reference for 9/24 Pin Printer Paper Specifications Date: 10/9/92 Page(s): 1 of 1 PSB No: P-0022D Originator: SLS This PSB provides a quick reference for the paper specifications on Epson’s current line of 9-pin and 24-pin dot-matrix printers when using continuous paper.
デバイスEpson P-0082の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Epson P-0082をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはEpson P-0082の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Epson P-0082の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Epson P-0082で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Epson P-0082を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はEpson P-0082の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Epson P-0082に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちEpson P-0082デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。