EpsonメーカーSTYLUS 870の使用説明書/サービス説明書
ページ先へ移動 of 74
EPSON Im aging Technology Center Released: 10/6/00 Revision: 1 EPSON Programming Guide For 6 Color EPSON Sty lus Ink Jet Printer Styl us Photo 870 (Level I).
EPSON Im aging Technolog y Center Page: 2 Revision: 1 10/6/00 A ll Rights Reserved. T his publication may only be used for the purposes of research and development of products and services enhancing, .
EPSON Im aging Technolog y Center Page: 3 Revision: 1 10/6/00 TABLE OF CONTENTS: CHAPTER 1 : INTRODUCTION ................................ ................................ ................................ ..............................................
EPSON Im aging Technolog y Center Page: 4 Revision: 1 10/6/00 6.8 SET P AGE LENGTH IN DEFINED UNIT(EXT E NDED) “ESC (C NL NH M1 M2 M3 M4” ............ 28 6.9 SELECT GRAPHICS MODE “ESC (G NL NH M” ............................................. 29 6.
EPSON Im aging Technolog y Center Page: 5 Revision: 1 10/6/00 6.36 SET <MOVX> UNIT TO 8 DOT S <MOVXBYT E >” .......................................... 62 6.37 SET <MOVX> UNIT TO 1 DOT <MOVXDOT>” ............................
EPSON Im aging Technolog y Center Page: 6 Revision: 1 10/6/00 LIST OF TABLES: Tab le 1 EPSON Stylus Photo 870 Prin ter Feature Summary ............................................................... 8 Tab le 2 The EPSO N Stylus Photo 870 Paper T ypes and Sizes .
EPSON Im aging Technolog y Center Page: 7 Revision: 1 10/6/00 This Progr amm ing Guide is intende d for use in conjunc tion with the EP SON Standard ESC/P Reference Manual (Decem ber 1997) CHAPTER 1 :.
EPSON Im aging Technolog y Center Page: 8 Revision: 1 10/6/00 Table 1 EPS ON Stylus Photo 870 Prin ter Feature Sum mary EPSON Stylus P hoto 870 48 black nozzles Print Head 240 color nozzles, 48 n ozzles x 5 (CcMm Y).
EPSON Im aging Technolog y Center Page: 9 Revision: 1 10/6/00 CHAPTER 2 P APER - TYPES, SIZES AND ORIENT A TION MODE 2.1 EPSON P aper Types and Sizes for the Stylus Photo 870 EPSON Sty lus Photo 870 p.
EPSON Im aging Technolog y Center Page: 10 Revision: 1 10/6/00 Paper T ype Size US EU JPN Photo Paper Cut sheets Letter Y es No No A 4 N o Ye s Ye s Photo Paper (car d) 1 13.
EPSON Im aging Technolog y Center Page: 11 Revision: 1 10/6/00 2.2 EPSON P aper Types and Orientation for the Stylus Photo 870 EPSON Sty lus Photo 870 printer will print with portrait or landscape orientation as shown: Table 3 Pa per T ypes and Orienta tion Orientation Paper T ype Dimensions W x L ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ Legal 8.
EPSON Im aging Technolog y Center Page: 12 Revision: 1 10/6/00 CHAPTER 3 RECOMMENDA TIONS The following recommendations are provided for development of printer drivers for the Sty lus Photo 870 printer. The values provi ded are only startin g recomme nd ations.
EPSON Im aging Technolog y Center Page: 13 Revision: 1 10/6/00 3.3 Black Ink Mode Setting Recomm endations for the Stylus COLOR 870 Table 6 Black ink printing recom mendations.
EPSON Im aging Technolog y Center Page: 14 Revision: 1 10/6/00 CHAPTER 4 PRINT ABLE AREAS 4.1 Printable Area – Stylus P hoto 870 The division of the paper between printing area and non-printing area is controlled by the values of A, B, C, D, E, G, and H, and by the dot unit (1 dot = 1/360 inch.
EPSON Im aging Technolog y Center Page: 15 Revision: 1 10/6/00 4.2 Printable Areas for Standard Size Papers Table 8 Standard Printable area values for A, B, D and E according to the printable area diagram .
EPSON Im aging Technolog y Center Page: 16 Revision: 1 10/6/00 CHAPTER 5 COMMAND SEQUENCE FLOW 5.1 Raster Graphics Modes The following three compression m odes are available for raster graphics commands: 1) Non-compressed mode The print data is transferred without compression.
EPSON Im aging Technolog y Center Page: 17 Revision: 1 10/6/00 5.2 Non-Compressed Mode & RLL Com pression Mode Command Transfer Sequences Command setting procedure for non-compressed mode and RL L.
EPSON Im aging Technolog y Center Page: 18 Revision: 1 10/6/00 5.3.
EPSON Im aging Technolog y Center Page: 19 Revision: 1 10/6/00 TIFF Compr ession Mode Com mand Tr ansfer Sequenc es The following chart provides basic commands in proper sequence for TI FF compression mode. Table 11 Com mand sequences for TIFF Compression Mo de By document 1.
EPSON Im aging Technolog y Center Page: 20 Revision: 1 10/6/00 5.4 Roll Paper Mode Com mand Transfer Sequences The following chart provides basic commands in proper sequence for the roll paper mode. I t display s the page format se tting utilized with the ESC (c c ommand for a top mar gin 0 setting.
EPSON Im aging Technolog y Center Page: 21 Revision: 1 10/6/00 CHAPTER 6 INI DIVIDUAL COMMAND SPECI FICA TIONS 6.1 Line f eed “LF” Forma t: AS CII LF H e x 0 A Decimal 10 Function: 1) Advances the printing position in the Y direction from the current one in the positive Y direction by an amount equal to the current line separation amount.
EPSON Im aging Technolog y Center Page: 22 Revision: 1 10/6/00 6.2 Form feed “FF” Forma t: AS CII FF H e x 0 C Decimal 12 Function: 1) The contents of the print buffer are printed, the position ma.
EPSON Im aging Technolog y Center Page: 23 Revision: 1 10/6/00 6.3 Carriage return “CR” Forma t: AS CII CR H e x 0 D Decimal 13 Function: 1) The printing position in the X direction is se t to the origin (the lef t margin) on the X axis of the position management coordinate sy stem.
EPSON Im aging Technolog y Center Page: 24 Revision: 1 10/6/00 6.4 Carriage return “ESC EM n” Forma t: AS CII ESC EM n Hex 1B 19 6E Decimal 27 25 110 Function: Se ts controls for paper loading/eje.
EPSON Im aging Technolog y Center Page: 25 Revision: 1 10/6/00 6.5 Set absolute horizontal print position “ESC $ nL nH” Forma t: AS CII ESC $ nL nH Hex 1B 24 nL nH Decimal 27 36 nL nH Range of Val.
EPSON Im aging Technolog y Center Page: 26 Revision: 1 10/6/00 6.6 Set absolute horizontal print position “ESC ( $ nL nH m1 m2 m 3 m4” Forma t: AS CII ESC $ nL n H m1 m2 m3 m4 Hex 1B 24 nL nH m1 m.
EPSON Im aging Technolog y Center Page: 27 Revision: 1 10/6/00 6.7 Set page length in def ined unit “ESC (C nL nH mL m H” Forma t: AS CII ESC ( C n L nH m L mH Hex 1B 28 43 nL nH mL mH Decimal 27 .
EPSON Im aging Technolog y Center Page: 28 Revision: 1 10/6/00 6.8 Set page length in def ined unit(extended) “ESC (C nL nH m1 m 2 m3 m4” Forma t: AS CII ESC ( C nL nH m1 m2 m3 m4 Hex 1B 28 43 nL .
EPSON Im aging Technolog y Center Page: 29 Revision: 1 10/6/00 6.9 Select graphics mode “ESC (G nL nH m” Forma t: AS CII ESC ( G nL nH m Hex 1B 28 47 nL nH m Decimal 27 40 71 nL nH m Range of Values for Parameters: nL=01H, nH=00H m=01H or 31H Function: 1) Shifts to graphics mode.
EPSON Im aging Technolog y Center Page: 30 Revision: 1 10/6/00 6.10 Set unit “ESC (U nL nH m” Forma t: AS CII ESC ( U n L nH m Hex 1B 28 55 nL nH m Decimal 27 40 85 nL nH m Range of Values for Par.
EPSON Im aging Technolog y Center Page: 31 Revision: 1 10/6/00 6.11 Set unit(extended) “ESC (U nL nH P V H m L mH” Forma t: AS CII ESC ( U n H P V H mL mH Hex 1B 28 55 nH P V H mL mH Decimal 27 40.
EPSON Im aging Technolog y Center Page: 32 Revision: 1 10/6/00 6.12 Set absolute vertical print position “ESC (V nL nH mL m H” Forma t: AS CII ESC ( V n L nH m L mH Hex 1B 28 32 nL nH mL mH Decima.
EPSON Im aging Technolog y Center Page: 33 Revision: 1 10/6/00 6.13 Set absolute vertical print position(extended) “ESC (V nL nH m1 m 2 m3 m4” Forma t: AS CII ESC ( V nL nH m1 m2 m3 m4 Hex 1B 28 3.
EPSON Im aging Technolog y Center Page: 34 Revision: 1 10/6/00 6.14 Set page format “ESC (c nL nH tL tH bL bH” Forma t: AS CII ESC ( c nL nH tL tH bL bH Hex 1B 28 63 nL nH tL tH bL bH Decimal 27 4.
EPSON Im aging Technolog y Center Page: 35 Revision: 1 10/6/00 6.15 Set page format(extended) “ESC (c nL nH t1 t2 t3 t4 b1 b2 b3 b4” Forma t: AS CII ESC ( c nL nH t1 t2 t3 b1 b2 b3 b4 Hex 1B 28 63.
EPSON Im aging Technolog y Center Page: 36 Revision: 1 10/6/00 New lines generated by the LF command which go outside the printable area are affected. Processing by the ESC (v command is affected.
EPSON Im aging Technolog y Center Page: 37 Revision: 1 10/6/00 6.16 Select MicroWeave print mode “ESC (i” Forma t: AS CII ESC ( i 01H 00H n Hex 1B 28 63 01 00 n Decimal 27 40 105 1 0 n Range of Values for Parameters: n=00H, 01H, 30H, 31H Function: 1) Selects / desel ects the MicroW eave mode.
EPSON Im aging Technolog y Center Page: 38 Revision: 1 10/6/00 6.17 Select dot size “ESC (e nL nH m d” Forma t: AS CII ESC ( e nL nH m d Hex 1B 28 65 nL nH m d Decimal 27 40 101 nL nH m d Range of Values for Parameters: nL=02H, nH=00H m=00H, d=00H, 01H, 02H, 03H, 04H, 10H Function: 1) The dot size is set according to the value of d.
EPSON Im aging Technolog y Center Page: 39 Revision: 1 10/6/00 6.18 Select color “ESC (r nL nH m n” Forma t: AS CII ESC ( r nL nH m n Hex 1B 28 72 nL nH m n Decimal 27 40 114 nL nH m n Range of Values for Parameters: nL=02H, nH=00H m=00H,01H n=00H, 01H, 02H, 04H Function: 1) The print color i s selected according to the val ues of m and n.
EPSON Im aging Technolog y Center Page: 40 Revision: 1 10/6/00 6.19 Set relative vertical print position “ESC (v nL nH mL m H” Forma t: AS CII ESC ( v nL nH mL mH Hex 1B 28 76 nL nH mL mH Decimal .
EPSON Im aging Technolog y Center Page: 41 Revision: 1 10/6/00 6.20 Set relative vertical print position “ESC (v nL nH m1 m 2 m3 m4” Forma t: AS CII ESC ( v n L nH m1 m2 m3 m4 Hex 1B 28 76 nL nH m.
EPSON Im aging Technolog y Center Page: 42 Revision: 1 10/6/00 6.21 Print raster graphics “ESC . c v h m nL nH d1...dk (c=0,1)” Forma t: AS CII ESC .
EPSON Im aging Technolog y Center Page: 43 Revision: 1 10/6/00 Run-length encoding compression mode I n run-length encoding compression mode, the data is transferred in the following format. The data to be printed is alway s transferred in the format (counter) + (data).
EPSON Im aging Technolog y Center Page: 44 Revision: 1 10/6/00 Related Comma nds: Comma nds related in the dire ction of apply ing an ef fect (Setting) None Commands related in the direction of receiv.
EPSON Im aging Technolog y Center Page: 45 Revision: 1 10/6/00 6.22 Enter TIFF compressed mode “ESC . 2 v h 1 0 0” Forma t: AS CII ESC . 2 v h 01H 00H 00H Hex 1B 2E 32 v h 01 00 00 Decimal 27 46 50 v h 1 0 0 Range of Values for Parameters: v=5, 10, 20 (v/3600 dpi) h=5, 10, 20 (h/3600 dpi) Function: 1) TI FF ver.
EPSON Im aging Technolog y Center Page: 46 Revision: 1 10/6/00 Commands related in the direction of apply ing an effect (Operation) Only the following commands a re valid: XFER CR MOVX EXI T MOVY MOVXBYTE COLR MOVXDOT Commands related in the direction of recei ving an effect (Operation) The "unit" units are set by the ESC (U command.
EPSON Im aging Technolog y Center Page: 47 Revision: 1 10/6/00 6.23 Set paper dimension “ESC (S nL nH w1 w2 w3 w4 l1 l2 l3 l4” Forma t: AS CII ESC ( S nL nH w 1 w2 w3 w4 11 12 13 14 Hex 1B 28 53 n.
EPSON Im aging Technolog y Center Page: 48 Revision: 1 10/6/00 6.24 Set r esolution of Raster image “ESC (D nL nH rL rH v h” Forma t: AS CII ESC ( D nL nH rL rH v h Hex 1B 28 44 nL nH rL rH v h De.
EPSON Im aging Technolog y Center Page: 49 Revision: 1 10/6/00 Commands related in the direction of receiving an effect (Setting) The Resolution setting of Raster imag e is returned to this initia l states by the ESC @ and the ESC (G commands.
EPSON Im aging Technolog y Center Page: 50 Revision: 1 10/6/00 6.25 T ransf er Raster image “ESC i r c b nL nH m L mH d1......dk” Forma t: AS CII ESC I r c b nL nH mL mH d1 d2…dk Hex 1B 69 r c b.
EPSON Im aging Technolog y Center Page: 51 Revision: 1 10/6/00 6.26 Initialize printer “ESC @” Forma t: AS CII ESC @ Hex 1B 40 Decimal 27 64 Range of Values for Parameters: - Function: 1) The various settings a re returned to their initial values.
EPSON Im aging Technolog y Center Page: 52 Revision: 1 10/6/00 6.27 Turn unid irectional mode on/off “ESC U n” Forma t: AS CII ESC U n Hex 1B 55 n Decimal 27 85 n Range of Values for Parameters: n.
EPSON Im aging Technolog y Center Page: 53 Revision: 1 10/6/00 6.28 Set relative horizontal print position “ESC nL nH” Forma t: AS CII ESC nL nH Hex 1B 5C nL nH Decimal 27 92 nL nH Range of Valu.
EPSON Im aging Technolog y Center Page: 54 Revision: 1 10/6/00 6.29 Set relative horizontal print position “ESC (/ nL nH n1 n2 m1 m 2” Forma t: AS CII ESC ( / nL nH n1 n2 m1 m2 Hex 1B 28 2F nL nH .
EPSON Im aging Technolog y Center Page: 55 Revision: 1 10/6/00 6.30 Select printing color “ESC r n” Forma t: AS CII ESC r n Hex 1B 72 n Decimal 27 114 n Range of Values for Parameters: 00H ≤ n .
EPSON Im aging Technolog y Center Page: 56 Revision: 1 10/6/00 6.31 Extended Raster Graphics Specific Comm ands-Binaray Mode Comm ands for“ESC .2” Forma t: <xxxxxxxx>B (Comm and by te) Range of Values for Parameters: - Function: 1) The internal commands fall into two groups.
EPSON Im aging Technolog y Center Page: 57 Revision: 1 10/6/00 * The re maining f our least sig nifican t bits are the pa ramete r embedded in the command by te (unsigned). I f the parameter has a value of from 0 to 15, it can be embedded in the command by te.
EPSON Im aging Technolog y Center Page: 58 Revision: 1 10/6/00 6.32 Select printing color “<COLR>” Forma t: <1000xxxx>B Range of Values for Parameters: 10000000B , 10000001B, 10000010B.
EPSON Im aging Technolog y Center Page: 59 Revision: 1 10/6/00 6.33 Carriage return to left-most print position “<CR >” Forma t: <11100010>B Range of Values for Parameters: - Function: 1) The printing position in the X direction is set to the origin upon the X axis.
EPSON Im aging Technolog y Center Page: 60 Revision: 1 10/6/00 6.34 Exit TIFF compressed mode “<EXIT>” Forma t: <11100011>B Range of Values for Parameters: - Function: 1) Terminates compressed mode. 2) The raster data remaining in the pr inter is all printed.
EPSON Im aging Technolog y Center Page: 61 Revision: 1 10/6/00 6.35 Set relative horizontal position “<MOVX >” Forma t: <010F xxxx>B Range of Values for Parameters: I f F=0: -8 ≤ par.
EPSON Im aging Technolog y Center Page: 62 Revision: 1 10/6/00 6.36 Set <MOVX> unit to 8 dots <MOVXBYTE >” Forma t: <11100100>B Format: <11100100>B Range of Values for Parameters: - Function: 1) The unit set by the ESC (U command is taken a s standard, and 8 times that unit is taken as 1 unit for the MOVX command.
EPSON Im aging Technolog y Center Page: 63 Revision: 1 10/6/00 6.37 Set <MOVX> unit to 1 dot <MOVXDOT>” Forma t: <11100101>B Range of Values for Parameters: - Function: 1) The unit set by the ESC (U command is taken as standard, and that unit is taken as 1 unit for the MOVX command.
EPSON Im aging Technolog y Center Page: 64 Revision: 1 10/6/00 6.38 Set relative vertical position < MOVY >” Forma t: <011F xxxx>B Range of Values for Parameters: I f F=0: 0 ≤ paramete.
EPSON Im aging Technolog y Center Page: 65 Revision: 1 10/6/00 6.39 Transfer raster graphics data < XFER >” Forma t: < 001Fxxxx>B (n ) d1, ..., dn Range of Values for Parameters: I f F=0: 0 ≤ number of data items ≤ 15 I f F=1: counter value = 1, 2 The number of data items = n1 or n1 + n2 x 256 0 ≤ d1, .
EPSON Im aging Technolog y Center Page: 66 Revision: 1 10/6/00 6.40 EPSON packet m ode exit command (special com mand)”0 0 0 ESC 1 @EJL 20H 1284.4 0AH @EJL 20H 20H 20H 20H 20H 0AH” Forma t: AS CII 00H 00H 00H ESC 01H @EJL 20H 1284.
EPSON Im aging Technolog y Center Page: 67 Revision: 1 10/6/00 6.41 Enter Remote Mode ESC "(R" 08H 00H 00H "REMOTE1 Forma t: AS CII ESC ( R 08H 00H 00H R E M O T E 1 Hex 1B 28 52 08 00 00 52 45 4D 4F 54 45 31 Decimal 27 40 82 8 0 0 82 69 77 79 84 69 49 Function: * The present emulation mode is terminated, and enter remote mode.
EPSON Im aging Technolog y Center Page: 68 Revision: 1 10/6/00 6.42 Select Paper F eed Sequence "SN" 03H 00H 00H m1 m2 Forma t: AS CII S N 03H 00H 00H m1 m2 Hex 53 4E 03 08 00 m1 m2 Decimal .
EPSON Im aging Technolog y Center Page: 69 Revision: 1 10/6/00 Depending on the paper size and the ty pe of paper used, the EPSON Stylus Photo 870 printer should receive SN command values for paper feeding as display ed in the following tables: Table 13 Values for 2nd param ter when 1st parameter is 00H (Paper feed m ode) in the SN comm and.
EPSON Im aging Technolog y Center Page: 70 Revision: 1 10/6/00 Table 14 Values for 2nd param eter when 1st parameter is 01H (Paper gap m ode) in the SN comm and.
EPSON Im aging Technolog y Center Page: 71 Revision: 1 10/6/00 Function: * C hanges the mechanical sequence for the defaul t environment t o the value specified by m1 and m2. * If the parameter is out of range (03H - FF H), this command is ignored, and the previous setting is maintained.
EPSON Im aging Technolog y Center Page: 72 Revision: 1 10/6/00 6.43 Select Paper F eed Sequence "EX" 03H 00H 00H m1 m2 Forma t: AS CII E X 03H 00H 00H m1 m2 Hex 45 58 03 00 00 m1 m2 Decimal .
EPSON Im aging Technolog y Center Page: 73 Revision: 1 10/6/00 Set Roll Paper Mode “EX" 06H 00H 00H 00H 00H 00H 05H m1 Forma t: AS CII E X 06H 00H 00H 00H 00H 00H 05H m1 Hex 45 58 06 00 00 00 0.
EPSON Im aging Technolog y Center Page: 74 Revision: 1 10/6/00 6.44 Terminate Rem ote Mode ESC 00H 00H 00H Forma t: AS CII ESC 00H 00H 00H Hex 1B 00 00 00 Decimal 27 0 0 0 Function: - Copies the default environme nt to the current setting . - Ex ecutes the ESC “@” command in ESC/P2.
デバイスEpson STYLUS 870の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Epson STYLUS 870をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはEpson STYLUS 870の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Epson STYLUS 870の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Epson STYLUS 870で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Epson STYLUS 870を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はEpson STYLUS 870の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Epson STYLUS 870に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちEpson STYLUS 870デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。