EpsonメーカーStylusPro10000の使用説明書/サービス説明書
ページ先へ移動 of 168
EPSON Stylus ® Pro 10000 Printer Guide EPSON Stylus ® Pro 10000 Printed in USA CPD-12208.
EPSON Styl us ® Pro 10000 Series PRINT ER GUIDE ®.
ii Printed on recycled paper. Copyright © 2001 by Epson America, Inc. All rights reserved. No part o f this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any mean s, electr onic, mec hanica l, photoc opying, recordi ng, or oth erwise, wi thout th e prior written permission of SEIKO EPSON CORPORATION.
iii FCC Compliance Statement For Unit ed States User s This equipment has been tested and found to co mply with the limits for a Class A digital device, pursuant to Part 15 of the FC C Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
v Introduct ion Options and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 How To Use Your Manuals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Using This Printer Guide . . . . . . . . . . . . . . .
-vi vi | Contents Using Roll Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6 Guidelines for Usi ng Roll Paper . . . . . . . . . . . . . . . . . . . . . . . . . 2-7 Using the Roll Paper Belts . . . . . . . . . .
-vii Contents | vi i Managing Print Jobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-11 Using the Progress Meter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-11 Using the Spool Manager . . . . . . . . .
-viii viii | Contents Transporting or Storing the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . 6-15 Preparing the Printer for Shipment . . . . . . . . . . . . . . . . . . . . . . 6-15 Moving the Printer on the Stand . . . . . . . . . . .
1 Introducin g a new era in wide-fo rmat color ink jet pr inting, the EPSON Stylus ® Pro 10000 delivers a c ombination of richly detaile d image quality, faste r print spee ds, and durabl e photogr aphic out put. EPSO N ® offers the Stylus Pro 10000 in two mo dels: Photographic Dye Ink (Stylus Pro 100 00) and Archival Ink (Stylus Pro 10000CF).
2 2 | Introduction Options and Access ories Your EPSON Styl us Pro 10000 pr inter offers these o ptional upgrad es and access ories: * Replace s the bla de for the p rinter’s built-i n cutter (s ee page 6-11 for detail s). ** Designed for use with heavy medi a, whic h can da mage the p rinter’s bu ilt-in cutter.
3 Introduction | 3 How To Use Your Manuals This guid e is part of a set, w hich also inc ludes th e docume ntation lis ted below: • The EPSON Stylus Pro 10000/1000 0CF Unpacking and Assemb ly Guide describes how to unpack and assemble the prin ter.
4 4 | Introduction Chapter 7 provide s troubleshooting tips and so lutions for problems invol ving pr int qua lity, pr inter op eratio n, an d paper h andling . Appendi x A provides the tech nical spec ificati ons for your printer, media, and ink cartri dges.
5 Introduction | 5 EPSON also provides technical assistance 24 hours a day through th e World Wide Web. You can reach EP SON Support at http://supp ort.epson.com. At this si te, you c an download drivers and other fil es, loo k at product documentat ion, access troubleshoot ing informat ion, and receiv e tec hnical advice through e-mail.
6 6 | Introduction Windows System Requirements To use your pr inter in eith er a standalone or peer-to-peer net work environmen t, your system sho uld in clude the req uirement s listed belo w: • IBM ® -compatible PC with a Pentium ® II 400 MHz or highe r processo r recommended • For paral lel connection: Windo ws 95, 98, Me, NT 4.
7 Introduction | 7 ENERGY S TAR Compli ance As an ENERGY STAR Par tner, EPSON has de termined that this product meets the EN ERGY STAR guidelines f or energy efficiency.
8 8 | Introduction • Place the pr inter near a wall outlet where the pl ugs can be easily unplugged. Placez l’imprim ante près d’une prise de contacte où la fiche peut être débranchée facil ement. • Do not let the power cor ds become damaged or frayed.
9 Introduction | 9 • Do not dismantle the i nk cartridges or try to refill them. Th is could result in damage to the print head. • Install t he ink cart ridge imme diately aft er you re move it fr om its package. Leaving the cartridge unpacked for a long time before use may result in re duced print qualit y.
10 10 | Introduction.
1-1 Setting Up the Printer | 1-1 Once you’ve as sembled the printer, you’ re ready to finis h setting it up. Even if you have no experience, you can easily c omplete this proc ess. You should allow at least two hours so that you don’t feel rushed.
1-2 1-2 | Setting Up the Printer 2. Push the indent ation on the ink comp artment cover to r elease the lock and open the cover. INK COMPART. OPEN appears on the dis play on the printer’ s contro l panel. 3. Push down o n the top of the first ca rtridge clamp and pull it forw ard.
1-3 Setting Up the Printer | 1-3 5. Hold the cartri dge so the arrow mar k on the left side of the cartridge is pointing to th e rear of the printe r. Insert the cartridge into the slot. Don’t for ce it. 6. Push the clamp back up into th e locked position.
1-4 1-4 | Setting Up the Printer Loading the Roll Paper Loading ro ll paper involves three steps: attachi ng the roll to the paper spindle , inser ting the sp indle in the printer , and loading the paper for printing. B efore yo u begin, remov e the pape r from it s box and re move the plastic cap and prote ctive cove ring.
1-5 Setting Up the Printer | 1-5 Inserting the Paper Spindle in the Pri nter Follow these steps to insert the s pindle in the p rinter: 1. Open the ro ll paper cover. Po sition the spin dle so that the wh ite end (with the wi de fixed pap er stop) is on the righ t.
1-6 1-6 | Setting Up the Printer 3. Place the black end of the spi ndle into the co rrespond ing left mounting brack et inside the prin ter. Loading the Roll Paper Follow these steps to load the roll p aper for pr inting: 1. Press the Paper Sou rce button on the control panel until the Roll Auto Cut lig ht comes on.
1-7 Setting Up the Printer | 1-7 2. Pull the paper se t lever out, to the releas ed positio n. The Paper Out light on the control panel comes on and LOAD PAPER appears on the control panel display.
1-8 1-8 | Setting Up the Printer 4. Pull the paper down s o it extends all the way thr ough the slot. 5. Turn the roll back to remo ve the slack. Then align the pap er with the two rows of holes at the pap er exit.
1-9 Setting Up the Printer | 1-9 6. Push the pap er set lever all th e way in, then c lose the roll pap er cover. PRESS PAUSE B UTTON appears bri efly on t he control panel di splay. 7. Press the Pau se butto n. The pri nt head mo ves and the pa per feeds into printing posi tion automatica lly.
1-10 1-10 | Setting Up the Printer 2. Press the Sel ecTyp e button on the control panel unt il you see TEST PRINT MENU o n the d isplay. 3. Press the Item button. You see NOZZLE CHECK=PR INT on the display. 4. Press the Enter button. The nozzle check prints as shown below.
1-11 Setting Up the Printer | 1-11 Connecting t he Printer to You r Computer Depending on your system, yo u can connect the printer to your computer using any of th e follow ing: • USB interface —.
1-12 1-12 | Setting Up the Printer Connecting to a Par allel Port (Window s Only) To use t he printe r’s built- in parall el interf ace, you ne ed a shiel ded, bidirectional, par allel cable. Follow the steps below to conne ct the printer to your computer: 1.
1-13 Setting Up the Printer | 1-13 2. Connect one end of the IEEE 1394 cabl e to the IEEE 1394 port on the back of your printer. 3. Connect the other e nd of the IEEE 1394 cable to yo ur computer’s IEEE 139 4 port.
1-14 1-14 | Setting Up the Printer 5. At the first sc reen, click Continue . The following di alog box appears: 6. Click the Install button, then click Continue on th e next scre en. 7. Fo llow the i nstru ction s to in stall you r softw are and sele ct a def ault paper size.
1-15 Setting Up the Printer | 1-15 10. S elect the app ropriate Background Printing radio button to turn backgr ound prin ting on or off. With background p rinting on, you can use your Maci ntosh while it’s preparing a document for printing, and use the EPSON Monitor3 utilit y to man age prin t jobs .
1-16 1-16 | Setting Up the Printer 4. Double -click t he driver install ation for y our print er model. I f you have the Ph otogra phic D ye Ink m odel, doub le-cli ck Install Stylus Pro 10000 With Photographic Dye Technology . If you have the Archival Ink model, doub le-click Inst all S tylus Pro 10000 Wit h Archival Ink Technology .
1-17 Setting Up the Printer | 1-17 Setting Up on a Macintosh Network This secti on explains how to se t up the Stylus Pro 10000 as a shared pr inter on an Apple Talk network . First install th e printer software on every computer that will need to access th e printer, as des cribed on page 1-13.
1-18 1-18 | Setting Up the Printer 4. Check Share this Print er , then type a na me for the printer and passwo rd informat ion as needed. 5. Click OK .
1-19 Setting Up the Printer | 1-19 Setting Up on a Windows 95, 98, or Me Network This section tells yo u how to set up your printer so that compute rs on the network can shar e it. First install th e printer software on every c omputer that will nee d to access the pr inter, as des cribed on page 1- 15.
1-20 1-20 | Setting Up the Printer 7. Select your printer, then choose Sharing on the File menu ( Properties for Wind ows 95). Yo u see a dialo g box similar to the foll owing: 8. Selec t Shared As , enter th e printer infor mation as needed , then click OK .
1-21 Setting Up the Printer | 1-21 3. The Ad d Printer W izard scre en appears. Click Next . You see a window like t he fo llow ing: 4. Click Network printe r , then click Next . 5. Click Browse . 6. Double-click the icon of the host computer (d irectly connected to the printer).
1-22 1-22 | Setting Up the Printer Setting Up on a Windows NT 4.0 or Windows 2000 Network This section tells yo u how to set up your printer so that compute rs on the network can shar e it. First install th e printer software on every c omputer that will nee d to access the pr inter, as des cribed on page 1- 15.
1-23 Setting Up the Printer | 1-23 Conf iguring the Cl ient C omputers Perform these step s on eve ry computer that will need to access the printer: 1. Click Start , point to Settings , and clic k Printers . 2. Right-click your pr inter icon, then click Properties ( Docu men t Defaults for Win dows NT).
1-24 1-24 | Setting Up the Printer 5. Selec t Local Port , then click New Port . The followi ng dialog box appears: 6. In the te xt box, typ e the approp riate inf ormation for y our syste m using the syntax below, then clic k OK : name of computer connected to the printer name of the shared printer 7.
1-25 Setting Up the Printer | 1-25 Aligning the Print Head Before you use the printer, you should align the print head to ensure accurate, clean printo uts. You can run the Prin t Head Alignmen t utility at this point t o check softw are ins talla tion a nd ma ke sure your print er is set up correc tly.
1-26 1-26 | Setting Up the Printer 3. Macintosh: Click the utility button. Windows : Click the Utility tab. 4. Click the Print Head Alignment button. 5. Follow the messages on your screen. The pr inter prints the h ead alignment patter ns. Two rows c onsistin g of sets of 15 bars are p rinted across th e width of the pap er.
1-27 Setting Up the Printer | 1-27 8. Use the arro w keys for row #1 to select the number for the bes t aligned bar. 9. Repeat st eps 6 through 8 for row #2. 10. If you chose a bar that did not consistently have the smallest gaps, click the Realig nment button and rep eat from step 4.
1-28 1-28 | Setting Up the Printer.
1 The EPSON Stylus Pro 10000 pr ints on a varie ty of media, incl uding roll paper and cut sheets up to 44 inches wide. You can also use heavy stock, including posterboard up to 59 mil (1.
2-2 2-2 | Handling Paper a nd Other Media Printing on EPSON Media EPSON pap ers, which are sp ecially formulat ed for the inks us ed in the printer, ens ure high-quality results. The following tables lis t the product codes for the EPSON media availabl e for your printer.
2-3 Handling Paper and Other Media | 2-3 * Re quires op tional 3-i nch high tension spi ndle Prem ium Lu ster Phot o Paper* 44-inch roll: S041 463 36-inch roll: S041 462 24-inch roll: S041 461 13-inch roll: S041 409 8.3-in ch roll: S 041408 Letter: S04140 5 11.
2-4 2-4 | Handling Paper a nd Other Media Stylus Pro 10 000 Archi val Ink mode l media prod uct codes Paper type Roll sizes Sheet sizes Double weight Ma tte Paper 44-inch roll: S041 387 36-inch roll: .
2-5 Handling Paper and Other Media | 2-5 * Re quires op tional 3-i nch high tension spi ndle ** Re quires op tional 2-i nch high ten sion spi ndle *** Not av ailable at time of print ing. For p roduct codes an d avail ability, visit the EPSON Pro Graphic s web site at h ttp://prog raphics.
2-6 2-6 | Handling Paper a nd Other Media Printing Tips for EPSON Media Follow thes e tips for using and s toring printing mater ials: • Avoid touching t he printable surface of the paper or othe r media with bare hands. Fingerpr ints may affect p rint quality .
2-7 Handling Paper and Other Media | 2-7 Guidelines for Using Roll Paper Follow these guidelines w hen you print on roll paper : • When both spi ndles have roll paper on them, w rap one of the ro ll paper belts around th e roll you’re not usi ng. This keeps the pap er out of the way.
2-8 2-8 | Handling Paper a nd Other Media When you’re not using the roll paper b elt, keep it wound around the end of the spind le. Removing Paper from the Spindle If you need to remove the paper roll from the spindle, follow these steps: 1. Open the ro ll paper cover and lift out the roll and sp indle.
2-9 Handling Paper and Other Media | 2-9 Cutting Paper Manually w ith the Built-in Cutter When you’re not us ing the Auto Cut setting, you nee d to cut the paper manually after your print job is finished.
2-10 2-10 | Han dling Paper and Other Media Using Cut Sheet Paper You can print on many typ es of cut sheet p aper and other me dia. The printer accepts sheets ranging from letter-size (8.
2-11 Handling Paper and Other Media | 2-11 5. Press the Pause button . The print head moves and the sheet feeds into printing posi tion automatica lly. READY appears on the control panel display. (Even if yo u don’t pres s Pause , the paper and prin ter will mov e into printing po sition automatic ally after 10 seconds.
2-12 2-12 | Han dling Paper and Other Media 5. Feed the poster board into the paper slot until the bottom edge of the board res ts behind the op en lower cover . 6. Align the b oard with the scale on th e roll pape r cover. 7. Align the b oard with th e vertical row o f holes at the pa per exit.
2-13 Handling Paper and Other Media | 2-13 8. Push the pap er set lever al l the way in, then c lose the lowe r cover. PRESS PAUSE B UTTON appears on the contro l panel displ ay. 9. Press the Pause button. The print he ad moves and the boar d feeds into printing posi tion automatica lly.
2-14 2-14 | Han dling Paper and Other Media 4. Press the Enter button to save the new setting. 5. Press the SelecType butt on to exit the Prin ter Setting menu. The letter W appears on th e right side of the contro l panel display t o remind you of the wide se tting.
2-15 Handling Paper and Other Media | 2-15 2. Slid e the up per hammock guides all the w ay in. Th en fully extend th e lower hammock guides , so that they rest on the floor. 3. Locate the r ear side hammock rings. Bring the rings up in back of the rod a nd hook t hem on t he uppe r hammock hooks.
2-16 2-16 | Han dling Paper and Other Media Catching Printouts Under the Printer Follow thes e steps to set up the hammock under the printer: 1. Unhook the hammock rings from the upper hammock hoo ks. 2. Extend the upp er hammock guides all the way ou t.
2-17 Handling Paper and Other Media | 2-17 Catching Printo uts Shorter Than 40 Inches If you’re printing on sheets shorter than 40 inches, yo u can set up your hammock so that it takes up less space . Follo w thes e steps: 1. Slide the lo wer hammock gui des all the way in, and extend the upper hammock guides out to thei r full length.
2-18 2-18 | Han dling Paper and Other Media Setting Paper Con figuratio ns When you use non-EP SON paper or ot her media, you may need to register the pape r’s thi ckness, dr ying time and suc tion set ting. When you’re u sin g a pap er st ock or o ther print ing mat erial for t he first time, always t est it on a small p rint job.
2-19 Handling Paper and Other Media | 2-19 5. Examine the pr inted patter n to determine which set of lines is the straightest ( shows the small est gap), and note the c orrespondi ng number. In the sample pattern, the lines under number 4 are the straightest.
2-20 2-20 | Han dling Paper and Other Media.
1 Your EPSON Styl us Pro 10000 comes w ith drivers and utili ties that l et you print and manage print jo bs in non-PostScrip t mode without a RIP. ICC profil es for C olorSyn c ® 3.x are included, s o you can use advanced c olor management feat ures from yo ur applicat ions or the driver itse lf.
3-2 3-2 | Printing wit h EPSON Drivers for Macintosh Choosing Page Setup Option s Many of the page setup o ptions corres pond to paper hand ling features that you can also set through the contro l panel. Software options give you addition al settings and overr ide control panel settings.
3-3 Printing with EPSON Drivers for Ma cintosh | 3-3 3. Select the type of paper you loaded in the printer from the Paper Source list. If your image is more than 62 inches long, select Roll Paper (Banner ) . You ca n also use this setting to print a series o f conti nuous images without any “margin space” between them.
3-4 3-4 | Printing wit h EPSON Drivers for Macintosh Follow thes e steps to make basic settings fo r automatic printe r adjustmen ts: 1. Choose Print from the File menu of your applicatio n. A dialog box like the fo llowing appear s: 2. Choo se the number o f Copie s and indicate which Pages you want to print.
3-5 Printing with EPSON Drivers for Ma cintosh | 3-5 6. Set the Mode option as follows: • Clic k Automatic to have the printer driver analyze the contents of your image or file and make the appro priate printing adjustments. If a Q ualit y/S peed slide r appears in the Mod e box, set it accordi ng to the priorities o f your print job .
3-6 3-6 | Printing wit h EPSON Drivers for Macintosh 7. Choose from the foll owing butto ns to access ad ditional fe atures: • Click to access the printer monit oring and maintenanc e utilities. See page 3- 17 for more informati on about the Status Monitor utilit y.
3-7 Printing with EPSON Drivers for Ma cintosh | 3-7 Selecting the Correct Media Type The table below lists the settings designed to p roduce the best re sults on EPSON media w hen you print on an EPS ON Stylus Pro 10000 Photographic Dye Ink model.
3-8 3-8 | Printing wit h EPSON Drivers for Macintosh The table belo w lists the se ttings to use wi th the Stylus Pro 10 000 Archival Ink model. In additio n to settings for specific EPSON media, the .
3-9 Printing with EPSON Drivers for Ma cintosh | 3-9 * Not av ailable at time of printing. Ch eck the E PSON Pro G raphics web site at http://prog raphics. epson.co m for media availabili ty. Choosing Advanc ed Print O ptions The advanced pr int options give you c omplete control over your pr inting environment.
3-10 3-10 | Printing with E PSON Drivers for Macintosh 4. Choos e one of the followi ng Print Qualit y setti ngs: • Economy To sav e ink • Normal - 360dpi For faster printing and every day needs .
3-11 Printing with EPSON Drivers for Macintosh | 3-11 6. Choose one of the following Color Management configurations: • Color Controls Lets you specif y in divid ual va lues for adjust ing b righ tne ss, co ntra st, saturation, and C MY in ks, or choose f rom the three C olor Adjustment modes.
3-12 3-12 | Printing with E PSON Drivers for Macintosh Color Management Settings The following tables lis t the color management settings available when you choose either Color Cont rols, Phot oEnhance4, or ColorSyn c. PhotoEnhance4 is designed to enhance images captured using vi deo camera s, digital c ameras, or scanners.
3-13 Printing with EPSON Drivers for Macintosh | 3-13 Managing Print Jobs Your printe r comes with se veral utilitie s that let you check on yo ur print jobs and schedule, cance l, pause, or restart them. First you need to set up background printing, so you can continue to w ork on your Macintosh while a file is being printed .
3-14 3-14 | Printing with E PSON Drivers for Macintosh 4. To select a pr iority for you r print job in the qu eue of jo bs waitin g to print, c lick on e of the fo llow ing: •U r g e n t to print be.
3-15 Printing with EPSON Drivers for Macintosh | 3-15 The progres s bar tracks the current p rint job. To canc el, pause, or restart a print job, clic k the document’s name, then c lick one of the f.
3-16 3-16 | Printing with E PSON Drivers for Macintosh Click the print jo b whose priority you want to change. Then click the Priority list box a nd selec t one of the follo wing sett ings : •N o r .
3-17 Printing with EPSON Drivers for Macintosh | 3-17 Checking Print er Status The St atus Monito r utilit y lets you ch eck the le vels of i nk in your pr inter and configure error messages and other features of printer operation. Follow these steps to check ink levels: 1.
3-18 3-18 | Printing with E PSON Drivers for Macintosh Selecting Configuration Options You can confi gure the way you want the printer to handle error and w arning messag es, ink level checks , and p rint fi le handl ing in the Conf igur ation Settings dialog box.
3-19 Printing with EPSON Drivers for Macintosh | 3-19 • Data will be sent to the printer after being stored on your disk prevents print head paus ing.
3-20 3-20 | Printing with E PSON Drivers for Macintosh.
1 Your EPSON Styl us Pro 10000 comes w ith drivers and utili ties that l et you print and manage print jo bs without a RIP. ICC profiles are includ ed, so you can use advanced color management features of your a pplications or the driver itse lf.
4-2 4-2 | Printing with EPSON Drivers for Wi ndows A dialog box like the fo llowing appears: 3. Select a Me dia Type setting appropr iate for the me dia you’re printing on, as listed in the table on page 4-4 (Photographic Dye Ink model) or 4-5 (Archiv al Ink model).
4-3 Printing with EPSON D rivers for Windows | 4-3 6. Select o ne of the follow ing from the pull-do wn menu: • Photo-reali stic if you are pr inting phot ographic images. This setting prod uces sharper im ages and automatically cor rects under- or over- expos ure of th e origin al image .
4-4 4-4 | Printing with EPSON Drivers for Wi ndows Selecting the Correct Media Type The table below lists the settings designed to p roduce the best re sults on EPSON media w hen you print on an EPS ON Stylus Pro 10000 Photographic Dye Ink model.
4-5 Printing with EPSON D rivers for Windows | 4-5 The table belo w lists the se ttings to use wi th the Stylus Pro 10 000 Archival Ink model. In additio n to settings for specific EPSON media, the dr.
4-6 4-6 | Printing with EPSON Drivers for Wi ndows * Not av ailable a t time of printing. Chec k the EPSO N web site fo r drive r updates, produ ct codes , and m edia av ailabil ity. Choosing Paper and Layout Options Many paper options corr espond to paper handling features t hat you can also set through the c ontrol panel.
4-7 Printing with EPSON D rivers for Windows | 4-7 2. Select the type of paper you loaded in the printer from the Paper Source list. 3. For Paper Size , determine the s ize of yo ur image. Then select the paper size you want from the Paper Size list .
4-8 4-8 | Printing with EPSON Drivers for Wi ndows You see a dial og box like the following: 3. If necessary, you can change your Me dia Type and Ink settings.
4-9 Printing with EPSON D rivers for Windows | 4-9 • Flip Horizontal For prin ting a mirror i mage of your fi le. Use with bac klight film. • Photo Printing Accelerator Enables faster transfer of data from your comp uter to the printer.
4-10 4-10 | Printing wi th EPSON Drivers for Windows Color Management Settings The following tables lis t the color management settings available when you cho ose ei th er Color Controls or PhotoEnhance4 . PhotoEnhance4 is designed to enhance images captured using vi deo camera s, digital c ameras, or scanners.
4-11 Printing with EPSON Driver s for Windows | 4-11 Managing Print Jobs Your printe r comes with se veral utilitie s that let you check on yo ur print jobs and schedule, cancel, pause, or restart them. The Progress Meter opens each time you send a print job.
4-12 4-12 | Printing wi th EPSON Drivers for Windows Using the Spool Manager The Spool Ma nager (not av ailable wit h Window s NT) d isplay s the s tatus of your pr int job file s and lets yo u control the m.
4-13 Printing with EPSON Driver s for Windows | 4-13 1. Do one o f the foll owing: • Clic k Start , point to Settings , then select Printers . Right-cli ck your pri nter ic on and select Properties .
4-14 4-14 | Printing wi th EPSON Drivers for Windows Setting Monitoring Preferences You can choose when and how you want to be notified of problems, whether you want a Status Monitor 3 icon to appear on your Windows taskbar, and whether you want to allow mo nitoring by other users w ho share the printer.
4-15 Printing with EPSON Driver s for Windows | 4-15 4. Click the Monitor ing Preferences button. You see the Monitoring Pref eren ces dia log bo x: 5. Select the Noti fication options yo u want to use. 6. If you want to have the Status Monitor 3 icon appear in your Window s taskba r, clic k the Shortcut Icon chec kbox.
4-16 4-16 | Printing wi th EPSON Drivers for Windows Optimizing Pri nt Speed Using t he Speed & Progre ss util ity, you can o ptimize your printe r’s para llel port for the fastest data transf er rate and spee d up the way your printer driver proces ses mult iple- copy pri nt jobs.
4-17 Printing with EPSON Driver s for Windows | 4-17 • EPSON Printer Port ( Windows 95, 98 , or Me only) le ts you optimize the transfer ra te of your printer port for EPSO N printers inste ad of using the Windows de fault prin ter por t.
4-18 4-18 | Printing wi th EPSON Drivers for Windows.
1 The EPSON Stylus Pro 10000 pr inter includes a number of monito ring utilit ies. Th e co ntrol p anel d isplay s statu s mes sages a nd erro r mess ages, and the lights alert you when a pro blem occurs or your ink runs out.
5-2 5-2 | Monitoring and Configuring the Printer Monitoring Normal Printe r Operation Messages appear on the control panel display and lights come on or flash to indicate v arious phases of pr inter ope ration.
5-3 Monitoring and Configuring the Printer | 5-3 Checking Print er Status You can use the contr ol panel to pri nt a status chec k or nozzle ch eck. These prints allow you to test the pr inter without send ing a print job.
5-4 5-4 | Monitoring and Configuring the Printer Checking Ink Level s and Component Life You can view print er status informa tion on th e contro l panel di splay wi thout printing a status check. Fo llow these s teps: 1. Pre ss the SelecType button on t he control panel.
5-5 Monitoring and Configuring the Printer | 5-5 Responding to Control Panel Lights and Messages When your ink or paper runs out or a problem occurs, a message appears on the display.
5-6 5-6 | Monitoring and Configuring the Printer PAPER JAM Paper Out light flashi ng Pape r has j ammed in the p rinter. Remove the jammed paper. See page 7-11 for more inform ation. PAPER NOT CUT Paper Out light flashi ng Roll paper was not cut comple tely .
5-7 Monitoring and Configuring the Printer | 5-7 SERVICE REQ. <0000010 0> All lights flashing The waste in k sy stem is fu ll. Contac t EPSON t o have the was te ink sy stem replaced . TURN PWR OFF AND ON — T his mes sage appea rs after you c lear a pape r jam.
5-8 5-8 | Monitoring and Configuring the Printer Using the Cont rol Panel to Configure the Pri nter In addition to tes ting the printe r and checking the st atus of vario us components , you can use the Se lecType me nus to confi gure print er settings and pe rform maint enanc e operati ons.
5-9 Monitoring and Configuring the Printer | 5-9 You can use the + or – button to c ycle through all three settings. 3. When you selec t the setting you want, press the Enter button to save it. Then pres s the SelecType button to exit the Pr inter Setting menu.
5-10 5-10 | Monito ring and Configuring t he Printer 2. Press the Item button repeatedly until INTERFACE=AUTO* appear s on the display. This is the de fault setting. • Press the + button o nce to select the parallel inte rface. INTERFA CE=PARAL LEL appears on the display.
5-11 Monitoring and Configuring the Printer | 5-11 Changing the Printer ’ s Code Page Setting The printer uses the PC437 code page (U.S. and standard European character sets) by de fault. You can use the control panel to change i t to the PC850 code pa ge (m ultilin gual c haract er sets) i f neces sary.
5-12 5-12 | Monito ring and Configuring t he Printer Setting the C ontrol Panel Language All contro l panel mess ages are dis played in Engl ish. Howeve r, you can use a specia l printer maint enance .
1 The EPSON Stylus Pro 10000 pr inter requir es very little mainte nance to keep wo rking a t its be st. This chapter describ es the follow ing rout ine proced ures: • Running a cleaning cyc le • .
6-2 6-2 | Maintaining and Tr ansporting the Printer 2. If you have an application running, access the printer settings dialog box as desc ribed on pag e 3-3 (Maci ntosh) or page 4-1 (Wind ows). Or, with Windows, cl ick Start , point to Setting s , and select Printers .
6-3 Maintaining and Tran sporting the Printer | 6- 3 6. Click the Head Clean ing button and follow th e instructions on the screen to clean the print head. Cleaning takes about 60 s econds, during which th e printe r makes some noise and the Pause light flashes.
6-4 6-4 | Maintaining and Tr ansporting the Printer Cleaning the Print Head Using t he Control Panel Follow these steps to r un the cleaning cyc le from the printer ’ s control panel: 1. Print a no zzle check to make sure the prin t head needs clea ning.
6-5 Maintaining and Tran sporting the Printer | 6- 5 Aligning the Print Head from the Control Panel You can use EPSO N roll paper to print the alignment patte rns. Two ro ws consisting o f sets o f 15 bars are p rinted acro ss the wi dth of the paper.
6-6 6-6 | Maintaining and Tr ansporting the Printer 7. Look at the other pa tterns in the fi rst row to see if the same numbe r consistently has the smallest gaps. If not, choose the number that general ly has the smallest g aps. 8. Check the c ontrol panel d isplay.
6-7 Maintaining and Tran sporting the Printer | 6- 7 Replacing Ink Cartridges When one of the Ink Out lights is flashing ( and INK LOW is disp layed on the control pane l), the co rrespondi ng cartridge is almos t out of ink. Make sure you have a replacement cartridge.
6-8 6-8 | Maintaining and Tr ansporting the Printer 2. Push the indent ation on the ink comp artment cover to r elease the lock and open the cover. INK COMPART. OPEN appears on the display. 3. Locate the slot containi ng the empty ink cartridge (correspo nding to the INK OUT light) .
6-9 Maintaining and Tran sporting the Printer | 6- 9 4. Caref ully pull th e empty cart ridge st raight out of the printer. 5. Make su re the repl acement c artridge is the correct co lor, and rem ove it from i ts pa ckage . If you ’ re using Archiv al ink, shake the c artridge gentl y before insta llin g it.
6-10 6-10 | Maintai ning and Transporting t he Printer 6. Hold the ink cartridge with the arrow mark o n the left side and po inting to the rear of the printer. Th en insert the in k cartridge in to the slot. Don ’ t force the cartridge . 7. Pus h the cartrid ge clamp bac k up.
6-11 Maintaining and Transporting the Print er | 6-11 Replacing the Paper Cutter Blade If you notice that your paper isn ’ t cut cleanly, the cutter blade may nee d to be replaced. If you use the blade to cut heav y stock or non-EPSON media, you may need to repl ace it more of ten.
6-12 6-12 | Maintai ning and Transporting t he Printer 4. When th e holder stops moving and OPEN LOWER COVER appears on the display, op en the lower cover . 5. When REP LACE CUTTER appears on th e display , you can open the casing. Push the side pin towar d the back while p ushing the front half of the paper cutte r cover up.
6-13 Maintaining and Transporting the Print er | 6-13 7. Carefully rem ove the cutter blade from the printer. Installing the New Cutter Blade After you h ave removed the u sed cutter bl ade, you ’ re ready to ins tall the new one. Follow these st eps: 1.
6-14 6-14 | Maintai ning and Transporting t he Printer 4. Push the side pin tow ard the back while pu shing the front half of the paper cutter cover down to close the casing. Then release the side pin. CLOSE L OWER COVER appears on the disp lay. 5. Close the lo wer cover.
6-15 Maintaining and Transporting the Print er | 6-15 6. If the outer case is dirty, clean it with a s oft, clean cloth dampened with mild detergent. K eep the ink car tridge compart ment closed to pre vent water fr om gett ing insi de.
6-16 6-16 | Maintai ning and Transporting t he Printer 2. Remove the following parts: • Ink cartridges • Power co rd • Interface cable • Paper hammock • Roll p ape r spin dles • All p aper.
6-17 Maintaining and Transporting the Print er | 6-17 6. Have four pe ople lift the printer unit off of the leg assembly, using the hand grip s located at the four co rners of th e printe r. Lift th e back of th e printe r first, til t it sl ightly to the fron t, then sl ide it b ack to rem ove it.
6-18 6-18 | Maintai ning and Transporting t he Printer 2. Fully insert the upper and lower hammock guides, then roll up the paper hammock. 3. Release the front caster s and retract the stabi lizer knobs. 4. Carefully ro ll the printer to its new location.
6-19 Maintaining and Transporting the Print er | 6-19 Replacing th e Waste In k System Approximately every two years of normal usage (25% duty cycle) or after 12,000 B1- size prints, yo u should have you r authorized EPSON servicer repl ace the wast e ink syste m.
6-20 6-20 | Maintai ning and Transporting t he Printer.
1 As you use your printer, you may occasionally experience a problem. The first thi ng you shou ld do i s diagno se the p roblem foll owing th e guid eline s in this chapter.
7-2 7-2 | Reso lvi ng Pr obl ems Using Hex Dump Mode You can use the printer ’ s hex dum p mode to identi fy pro blems if you kn ow how to inter pret hex code , or you can fax the hex p rintout to a tech nical support re presentativ e. Make sure the pr inter has pape r loaded and i s turned off.
7-3 Resolv ing Problems | 7-3 Print qu ality p roblem s Problem Solution Your prin t has banding or vertica l misali gnment. • Run a no zzle chec k and clea ning cy cle. See p age 6-1 fo r instructi ons. • Align the print hea d, as descr ibed on pa ge 6-4.
7-4 7-4 | Reso lvi ng Pr obl ems Your print appear s blurry or s meared. • Make su re th e Medi a Ty pe setting in the pri nter software i s correct for the media you ’ re printing on. • You ’ r e using the w rong pape r configuratio n setting (for non-EPSON m edia).
7-5 Resolv ing Problems | 7-5 Solvin g Oper ation al Probl ems If you can ’ t turn the printer on, if it stops printing unexpe ctedly, or if nothin g prints , check the fol lowing : • The printer is turned on and the O perate li ght is on.
7-6 7-6 | Reso lvi ng Pr obl ems Solvin g Misc ellaneou s Prin ting P roblem s If your printouts are not what you expected , try the suggestions below: Nothing pri nts (cont.) • The printer port s etting doesn ’ t match the prin ter connectio n port (Wind ows).
7-7 Resolv ing Problems | 7-7 Your pr int has inco rrect margins . • Check the page si ze or paper s ize setting s in you r applica tion. Mak e sure the y are with in the prin ter ’ s printable area. • Make su re the Paper Siz e setting in you r printer software i s correct for th e paper yo u ’ re usin g.
7-8 7-8 | Reso lvi ng Pr obl ems Sol ving Pa per Pr obl ems If paper feed or paper jam problems occ ur freque ntly, try one or more of the follow ing solutio ns: • When you ’ re lo ading roll paper, make s ure you li ne up the edge with the vertical ro w of hol es at the pr inter ’ s p aper exit .
7-9 Resolv ing Problems | 7-9 • Make su re the prin ter ’ s environm ent falls w ithin the required temperature and h umidity range. • Make sure the pap er is not too thick or to o thin. See pages 2-1 and A-4 for p aper sp ecific ations. • Make sur e no foreign ob jects are inside th e printer .
7-10 7-10 | Re solving Proble ms • If you have the paper ha mmock set up in front of the printe r, extend the paper guides out s o they rest on th e front of the hammoc k. • If you have the pap er hammock set up below the printer, extend the paper guides so that they rest on the back of the hammoc k.
7-11 Resolving Problems | 7-11 Clearing Paper Jams When pa per gets jammed in the print er, print ing stops and you see a PAPER JAM mess age on th e control panel di splay. Fo llow the se steps to cl ear paper jams: 1. If roll paper is jammed, open the roll paper cover and cut it by hand sligh tly abov e the pa per in sertion slot.
7-12 7-12 | Re solving Proble ms 4. Caref ully pull d own the jamme d paper . TURN PWR OFF AND ON is displayed on the control p anel. 5. Clo se the lower cove r, if necessa ry, then press the Pow er button to turn the pr inter off. P ress it again to tu rn it back on.
7-13 Resolving Problems | 7-13 3. Double-c lick the Installe r ic on. 4. Click Continue on the next screen. 5. On the in staller s creen, click the arr ow in the Easy Instal l list at the top and select Unins tall . Then c lick the Un install button at the bottom and follo w the o n-scree n instr uctions.
7-14 7-14 | Re solving Proble ms.
1 Printing A ppen di x A : Specifications Printing me thod On-de mand i nk jet No zz l e co n f i g ur a t i o n Black: 180 noz zles Colo r: 180 n ozzle s for each co lor (c yan, magenta, yellow, ligh.
A-2 A-2 | Specifi cations Environmental Mechanical Line spa cing 1/6 inc h or pr ogram mable in 1/720- inch increments RAM 1 28MB (f ixed) Charac ter sets EPSON C ourie r 10 char acters per i nch Char.
A-3 Specificati ons | A-3 Electri cal This pr oduct i s also desi gned for IT p ower sy stems with phase to phase volt age 22 0 – 240 V. Check the label on th e back of the printer for vo ltage informat ion.
A-4 A-4 | Specifi cations Paper Depending on the media, feed and print qual ity are guaranteed o n paper thicknesses o f 3.15 to 4.33 mil (0.08 to 0.11 mm), 64 to 90 gsm. Cut sheet paper specifications Size Dim ens ions in inches (app roximate) Dimensions in millimeter s Thicknes s Super B0 44 × 62.
A-5 Specificati ons | A-5 Poor quality pap er may reduce print quality and cause paper jams or oth er problems. If you enco unter problems, switch to a higher grade of paper. Do not use curled, folded, or deckle-edge paper. Printable Area Minimum margins f or roll paper and cu t sheets: * Defaul t roll pap er top and botto m margin s are 0.
A-6 A-6 | Specifi cations Print yield may vary, depending on how often you run print he ad cleaning cycles and how much you use the printer. Yi eld of the ini tial cartri dge set is reduced because of ink charging.
A-7 Specificati ons | A-7 Parall el Interf ace Forward Channel Reverse Channe l ECP Mode Data format 8-bit para llel, IEEE -1284 com patibilit y mode Synchronization STROBE pul se Han dshak e tim ing .
A-8 A-8 | Specifi cations USB Inte rface Standard Based o n Unive rsal Ser ial B us Spe cificat ions Revi sion 1. 1, Univ ersal Serial Bus Devi ce Class Definition for Printing Devices Version 1.
-1 A Accessories, 2 Adhesive Synth etic Paper, 2-4 Adhesive Vinyl, 2-4 Advanc ed Ph oto sett ing, 3 -5 Aligning print head control pa nel, 6-4 to 6-6 software , 1-25 to 1- 27 AppleTalk setting, 1- 14 .
-2 2 | Index Cut sheet paper heavy st ock, 2-11 to 2-14 loadi ng, 2-10 to 2-11 printable ar ea, A-5 Cut/Ejec t button , 2-9 Cutter checking life, 5-4 cutting pa per manuall y, 2-9 replac ing bla de, 6.
-3 Index | 3 Ink moni torin g leve l, 3- 17, 3-1 8, 4-11 to 4-15, 5-3 to 5- 4 waste ink system, 5-3 to 5-4, 6-19, A-1 Ink ca rtridg es checking stat us, 5-3 to 5-4 inst alling in new printer, 1-1 to 1.
-4 4 | Index Motors, checking sta tus, 5-3 to 5 -4 Moving prin ter, 6-15 to 6-18 N Nozzle check control panel, p rinting fro m, 1-9 to 1 -10 Nozzle C heck util ity, usin g, 6-1 to 6 -2 O Operate light.
-5 Index | 5 Posterbo ard, 2-11 to 2-14 Power consum ption, A-3 Print hea d alig ning , 1-25 to 1- 27, 6- 4 to 6- 6 checking stat us, 5-3 to 5-4, 6-1 to 6 -3 cleaning , 6-1 to 6-4 service life, A-1 Pr.
-6 6 | Index Resol ution Macintosh, 3-1 0 maxim um, A-1 Windows, 4-8 RIP soft ware, order ing, 2 Roll Mar g setting, 5-8, 7-7 Roll paper attach ing to spindle, 1-4 Auto Cut , 3-3, 4-7 Auto Ro tate, 3-.
-7 Index | 7 Troub leshooti ng, 7-1 t o 7-13 Tyvek Br illion , 2-5 U Uninstall ing software, 7-12 to 7-1 3 Unit ID nu mber , 4 USB cable requirement s, 5, 6 connecti ng to port, 1-1 1 drive r, unin st.
9 Photo Printing Accelerator sl ot optional interface card slot FireWire interface connectors AC i nlet USB interface connector parallel interface connector connector for optional Automatic Ta ke-Up R.
1 roll paper spindles roll paper cover control panel ink cartridge compartment paper set lever lower cover paper hammock mounting brackets.
EPSON Stylus ® Pro 10000 Printer Guide EPSON Stylus ® Pro 10000 Printed in USA CPD-12208.
デバイスEpson StylusPro10000の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Epson StylusPro10000をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはEpson StylusPro10000の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Epson StylusPro10000の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Epson StylusPro10000で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Epson StylusPro10000を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はEpson StylusPro10000の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Epson StylusPro10000に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちEpson StylusPro10000デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。