Eurekaメーカー4880の使用説明書/サービス説明書
ページ先へ移動 of 20
Upright V acuum Cleaner Owner ’ s Guide 4880 Series IMPORT ANT Do not return this product to the store. For assembly problems or questions contact: Eureka’s Customer Service Division toll free at 1-800-282-2886*, 8 a.m. - 7:30 p.m. (CST) Monday - Friday and 10 a.
IMPORT ANT SAFEGUARDS When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS V ACUUM CLEANER. W ARNING T o reduce the risk of fire, electric shock, or injury: • Do not use outdoors or on wet surfaces.
CONSEILS DE SÉCURITÉ Lors de l’utilisation d’un appareil électrique, quelques précautions élémentaires doivent être observées, incluant les suivantes: LISEZ TOUTES LES INSTRUCTIONS A V ANT D’UTILISER VOTRE ASPIRA TEUR.
T o reduce the risk of electric shock, this appliance has a polarized plug (one blade wider than the other). This plug will fit in a polarized outlet only one way . If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet.
5 HOW T O ASSEMBLE - See Back Page for Assembly Items Packed in Carton. CAUTION: Assemble the cleaner before using. CAUTION: Moving parts. Make sure on/off switch is in off (0) position before plugging in. NOTE: Features may vary by model yet all parts assemble the same.
6 6. Y ou will find your cord retainer on the handle above the upper cord hook. Firmly push the electrical cord down into the cord retainer before using the vacuum. This will place the cord out of the way while you are vacuuming. Remove cord from retainer when ready to store vacuum or when using hose and attachments.
7 HOW TO USE 1. Cord Retainer . T o use, push electrical cord down into cord retainer . 2. Motor Filter Indicator (red light) (on some models). Indicates when motor filter needs to be cleaned or replaced. 3. HEP A Filter Indicator (red light) (on some models) Indicates when the HEP A filter needs to be replaced.
8 HOW TO USE (continued) 15. Hose Retainers (2) . Place hose on retainers to store hose on unit. 16. Electrical Cord Hooks (2) . Wrap electrical cord around them to store electrical cord on unit. The upper cord hook turns to release the cord. T urn the hook up to store the cord.
9 How T o Use Accessories NOTE: Place cleaner on floor with the handle in storage position while using accessories. Do not place cleaner on furniture or steps. 1. Separate hose end from cleaner by pulling up with a slight twisting motion. Remove hose from hose retainers.
10 1 2 NOT E: T urn off the switch and unplug the electrical cord before replacing belt. Belt pulleys can become hot during normal use. T o prevent injury , avoid touching the motor shaft when checking the belt. 1. Move brush roll control lever to hard floor position.
5. Insert right end into base. Make sure it is fully into position. Ensure belt is centered on brush roll pulley . NOTE: The new belt will appear to be too large. This is normal. How T o Replace Brush Roll Belt (continued) 5 6. Replace base plate by first inserting all 4 front tabs into slots on base.
12 Dust Cup Lever 1 2 Filter T ube 3 Filter 6 Filter T ube Retainer Seals 6 7 HOW T O MAINT AIN (continued) NO TE : T urn off the switch and unplug the electrical cord before emptying dust cup. Never operate the vacuum cleaner without the dust cup and filters properly installed.
Cleaning And Replacing Filters (continued) HEP A Filter Check the HEP A filter once a month. Replace at least twice a year or if suction is declining. Some models have a red HEP A Filter warning light. If light comes on and stays on, replace filter . HINT : For ease of assembly , lay cleaner on its back and proceed to the following instructions.
14 How to Remove and Check Clear T ube Low suction or poor pickup may be due to a blockage in the vacuum cleaner . T o Check Attachment Hose 1. Remove hose and check suction at end of hose - if little or no suction, check dust cup and filters. Empty dust cup and clean or replace filters, if needed .
How to Reassemble Clear T ube 10. Reattach hose to clear tube. Insert hose and rotate clockwise to secure. 1 1. Hook the bottom of the clear tube on the cleaner next to the combination brush storage location. 12. Swing top of tube up and against the cleaner till quarterturn lock is in place.
Motor will not start. 䡺 Electric Plug 䡺 Push plug securely into outlet. 䡺 T ry another outlet. 䡺 Check circuit breaker . Motor suddenly stops. 䡺 Thermal Cut Off 䡺 Refer to page 8. Does not clean the carpet or 䡺 Dust Cup and Filter(s) 䡺 Empty the dust cup.
71643 6 1111 61 1 10 71 1 19-2 28251-1 19N 60990-2 61499-1 61250-1 57940-2 61498-1 71548 71681 70557-1 9.99 19.99 4.99 8.49 4.99 4.99 19.49 31.49 1.49 15.
.
THE EUREKA LIMITED W ARRANTY W hat This W arranty Covers Y our Eureka cleaner is warranted to be free from all defects in material and workmanship in normal household use for a period of one year . The w arranty is granted only to the original purchaser and members of his or her immediate household.
©2001 White Consolidated, Ltd. Printed in U.S.A. Part No. 71389 (1/03) Thank you for selecting a Eureka cleaner . 1 set of nesting wands 1 crevice tool 1 vacuum cleaner handle to be installed on unit Accessory Items in This Carton 1 hardware package (2 screws) Questions? Do Not Return T o Store Call 1-800-282-2886 8 a.
デバイスEureka 4880の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Eureka 4880をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはEureka 4880の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Eureka 4880の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Eureka 4880で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Eureka 4880を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はEureka 4880の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Eureka 4880に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちEureka 4880デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。