Eurekaメーカー5190の使用説明書/サービス説明書
ページ先へ移動 of 20
Index Important Safeguards ............. 2 General Information ................ 4 Thermal Cut Off ................ 4 & 7 Assemble ................................ 5 Use ....................................... 6-7 Accessories ......................
IMPORT ANT SAFEGUARDS When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS V ACUUM CLEANER. W ARNING T o reduce the risk of fire, electric shock, or injury: • Do not use outdoors or on wet surfaces.
CONSEILS DE SÉCURITÉ Lors de l’utilisation d’un appareil électrique, quelques précautions élémentaires doivent être observées, incluant les suivantes: LISEZ TOUTES LES INSTRUCTIONS A V ANT D’UTILISER VOTRE ASPIRA TEUR.
T o reduce the risk of electric shock, this appliance has a polarized plug (one blade wider than the other). This plug will fit in a polarized outlet only one way . If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet.
HOW TO ASSEMBLE V ACUUM CLEANER HANDLE CAUTION: Moving parts, make sure on/off switch is in off position before plugging in. STEP 1 Pull the foam protector pieces from the ends of the handle and throw away . STEP 2 Find the 2-part bolt in the plastic bag with the owner ’s guide.
NOTE: Never lift the cleaner by the control grip. Place the handle in the upright position before rolling the machine from room to room. The selector button must be locked into the manual position when the power switch is turned OFF or when rolling the machine.
HOW T O USE THE SELF-PROPELLED V ACUUM CLEANER (continued) How to Adjust the Cleaner Height Setting W ARNING: A void injury . Keep hair , loose clothing, fingers, and all parts of body away from openings and moving parts (such as the revolving brush roll and power drive wheel).
HOW TO USE THE ACCESSORIES NOTE: Do not place cleaner on furniture or steps as the brush roll or drive wheel may cause damage. Place cleaner on floor with the handle in storage position while using accessories. 1. On the back of the vacuum, pull hose nozzle out of the lower hose retainer .
9 Maintenance of Dirt Alert Feature (On some models) The dirt alert sensor uses infra-red technology to indicate whether or not floors are clean. When debris breaks the light beam, the red light comes on indicating additional cleaning is needed in this area.
HOW T O MAINT AIN The instructions in this booklet serve as a guide to routine maintenance. T o avoid unnecessary service calls, check the cyclonic cassette, belt, and brush roll often. Brush Roll The brush roll turns as it sweeps and combs the carpet nap.
How T o Replace Brush Roll Belt (continued) 1 1. Rotate the brush roll at least three revolutions to seat the drive belt. 12. Replace the hood onto the cleaner . Make sure the front of the hood is behind the furniture guard. 13. T ighten screws. 11 Use GENUINE EUREKA replacement belt, 54312.
12 HOW T O CLEAR HOSE CLOGS NOTE: T urn off the switch and unplug the electrical cord before clearing hose. 1. Remove the front bag cover . 2. Step on handle release. 3. Release the hose from the unit. See Detail 6. T o release the hose, grasp the hose adapter at depression and rotate to the left to release.
13 b a 3 How T o Empty Cyclonic Cassette NOTE: T urn off the switch and unplug the electrical cord before emptying cyclonic cassette. Never operate the vacuum cleaner without the cyclonic cassette or the filter . Emptying the Cyclonic Cassette: FOR INSTRUCTIONS ON HOW T O REMOVE THE CYCLONIC CASSETTE FROM THE CASSETTE BODY , SEE ABOVE.
How T o Replace Filters: Motor Filter Check the motor filter each time the cyclonic cassette is emptied. Cleaning the motor filter is recommended at this time. T o Clean Motor Filter 1. Remove the cyclonic cassette. 2. Remove filter from inside the cassette compartment (lower left side).
Lens Cover 15 How to Change Light Bulb (only for models with a headlight) NOTE: T urn off the power switch and disconnect the electrical cord before changing light bulb. 1. Lower handle to remove two screws from lens cover . 2. Lift lens cover from cleaner .
Motor will not start. Electric Plug Push plug securely into outlet. T ry another outlet. Check circuit breaker . Motor suddenly stops. Thermal Cut Off Refer to page 7. Does not clean the carpet Filters Clean or replace the filter(s). Hint: If picking up fine dust, the or floor .
58236A 58623A 54926 61333 60801 54777A 60285B 60696 61120 58728B 14070-3 38284-3 26708-119N 54505-3 61037 54785A 59949 54646A-3 60169-7 60166 60252-2 60251-2 48815 60976-1 3.99 5.99 9.99 1.99 5.99 8.39 19.99 3.99 2.99 4.39 4.09 3.29 2.69 5.19 4.49 10.
.
19 THE EUREKA LIMITED W ARRANTY W hat This W arranty Covers Y our Eureka cleaner is warranted to be free from all defects in material and workmanship in normal household use for a period of one year . The warranty is granted only to the original purchaser and members of his or her immediate household.
©1999 White Consolidated Industries, Inc. Printed in U.S.A. Part No. 70335C (2/01) Thank you for selecting a Eureka cleaner . 1 crevice tool Accessory Items in This Carton Questions? Do Not Return T o Store Call 1-800-282-2886 7 a.
デバイスEureka 5190の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Eureka 5190をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはEureka 5190の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Eureka 5190の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Eureka 5190で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Eureka 5190を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はEureka 5190の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Eureka 5190に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちEureka 5190デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。