EverFocusメーカーeDR400の使用説明書/サービス説明書
ページ先へ移動 of 61
Administr a tor’ s Guide and Oper a ting Instr uctions D i g i t a l V i d e o R e c o r d e r e DR400.
Administrato r’s Gu ide and Ope rating Instructio n s i W ARNING TO REDUCE RISK OF FI RE OR ELECTRIC SHOCK, DO NOT EXP OSE THIS APPLIANCE T O RAI N OR MOIS T URE. CA UTION DO NOT REMOVE COVER. NO USER SER VICEABLE P AR TS INSI DE . REFER SER VICING TO Q UALIFI ED SER VICE PERSONNEL.
Administrato r’s Gu ide and Ope rating Instructio n s ii PRECAUTIONS !" Refer all work related to the installation of this product to qualified service personne l or sy stem installers. !" Do not blo ck the ve ntilatio n opening or slots on the cover .
Administrato r’s Gu ide and Ope rating Instructio n s iii T able of Co nten ts 1. Pr oduct Overview …………………. ……………………….……... 1.1 Featur es…………………..… …….…………..…………… ……... 1.
Administrato r’s Guid e and O perating Instruc tions 1 1. Product Overview The PowerPlex e DR400, 4 Channel Digital V ideo Recorder , combin es the power of triplex multiplexing and dig ital video recording i nto on e comprehensi ve unit.
Administrato r’s Guid e and O perating Instruc tions 2 1.2 T echnical Overview 1.2.1 Video Inpu t an d Outpu t The di g ital v ideo recorder is designed to sup port either NTSC/EIA or P AL /CCIR standard. T o make the auto detection o f video standard work, at least one camera must be connected to th e video inpu t.
Administrato r’s Guid e and O perating Instruc tions 3 event log, etc. M otion detection o ptions for different time ty pes can be se t for each cam era input using a 16 (width) by 12 (heig ht) targ et overlay . Y ou can also enab le or disable motion alarms for d if ferent time ty pes.
Administrato r’s Guid e and O perating Instruc tions 4 2. Front & Rear P anels The following is a bri ef overview of the rear p anel and front panel o f EDR400. Rear Panel 1. Power Socket: Connects to the DC 24V power source or the AC adapter (syste m accepts 18V~30V DC power source).
Administrato r’s Guid e and O perating Instruc tions 5 Front Panel 9. Alarm In 1-4: Co nnects to alarm in puts 1-4 & 1 common g roun d. 10. Alarm Out: Co nnects to 2 Normally Closed alarm outputs (1 -2), 2 Normally Open alarm outp uts (3-4) & 1 common ground.
Administrato r’s Guid e and O perating Instruc tions 6 Side Panel 20. Hard Disk Tray : Please make sure to set the hard disk as master . T o access the hard disk, use the attached key to open the cov er and remo ve the hard disk holder . The k ey can’ t be remo ved from the cover while the cover is o pen.
Administrato r’s Guid e and O perating Instruc tions 7 3. System Installat ion The installation s described be low should be m ade by qualified service personne l or sy stem installers. 3.1 Before Installation Please refer to the fo llowing d iag ram for the system connections.
Administrato r’s Guid e and O perating Instruc tions 8 3.2 Basic Connections !" Came ras Connect each of the ca mera video input connector to the video output fr om a came ra or other c omposite video sou rce.
Administrato r’s Guid e and O perating Instruc tions 9 !" Printer (USB port) Connect the print e r to the USB port co nnector at sy stem startup. !" Microp hone/Speaker (Reserved) Connec t the microphon e/speaker or other audio d evices to the Audio In/Audio out conn ector .
Administrato r’s Guid e and O perating Instruc tions 10 4. Main Screen The diag ram above is the main screen display . The icons on the lower corner of th e screen are mainly for contro l and configuration, those on the right c orner for status indication.
Administrato r’s Guid e and O perating Instruc tions 11 Config – T o config ure (setup) th e behavio rs of the sy stem. L ogin – T o login the sy stem as Adm inistrator , Supervisor or Operator . Sequence Mode / Static Pag e Mode – T o togg le between Sequence Mode and Stati c Page Mo de.
Administrato r’s Guid e and O perating Instruc tions 12 There are 4 kin ds of devi ces in the st atus ind ication. T he displaying ord er is Camera, Alarm Output, Hard Disk , Alarm I npu t, then back to C a mera. E ach status bar stands for th e status of one device, the bott ommost for ID#1.
Administrato r’s Guid e and O perating Instruc tions 13 5. Basic Operation s & Log Display If the user does not log in th e sy stem, he will b e treated as a g u es t and can only vi ew the live video disp lay and device status .
Administrato r’s Guid e and O perating Instruc tions 14 There are 5 kinds of event logs: Alarm, Motio n, V ideo Loss, Hard Disk Full, and Power On/Off.
Administrato r’s Guid e and O perating Instruc tions 15 6. Setup ( Administ rator) T o login as an Administrator, please click on the Login icon, and enter the appro priate Administrator ’ s Log in n ame and Password (the factory default value for both of them is adm in ).
Administrato r’s Guid e and O perating Instruc tions 16 6.1 Time T ype Setup The behavior fo r the sy stem is the same when it’ s in the same T ime T y pe (or T ime Mode). Please refer to Camera Setup and Mo tion Setup fo r how they depe nd on Ti me T y pe.
Administrato r’s Guid e and O perating Instruc tions 17 6.2 Day T ype Setup The daily behaviors for the system are the sam e for t hose day s configured as of the same Day T ype. There are 2 default Day T y pes, WORK DA Y (Monday through Friday ) and HOLIDA Y (Saturday an d Sunday ), in the sy stem.
Administrato r’s Guid e and O perating Instruc tions 18 6.3 Calendar Setup The Calendar setup is provided for the adm inistrator to set the Day T y pe of each calendar d ay . It’ s design ed to be a Perpetual Calendar . Howe ver , up to 10 y ears of c alendar da y s c an be conf igur ed at any specific time.
Administrato r’s Guid e and O perating Instruc tions 19 6.4 Alarm Act ion Setu p The Alarm Actions allow the administrator to de fine how the digital video record er responds to th e triggered alarm fro m the Alarm Inp uts. There are up to 4 Alarm Actions that c o rrespond to 4 (Focus) Cameras for most appli c atio ns.
Administrato r’s Guid e and O perating Instruc tions 20 !" Focus Camera – T o define the camera that will respond to this Alarm Action. The default settings are Cam era 1 for Alarm Action 1, Camera 2 for Al arm Action 2 , and so on.
Administrato r’s Guid e and O perating Instruc tions 21 !" Log – L og to eve nt l og li s t or not. Please refer to Log Display for the details. !" Sho w Messag e – T o display the alarm message or not wh en the Alarm Action is trigg ered.
Administrato r’s Guid e and O perating Instruc tions 22 6.5 Motion Action Setup The Motion Actions allow the administrator to define how the dig ital video record er responds to the det e cted motion for th e cam eras. There are up to 4 Motion Actions that correspond t o 4 Alarm Outputs for mo st applications.
Administrato r’s Guid e and O perating Instruc tions 23 6.6 Video Loss A cti o n Setup The V ideo Loss Actions a llow the administra tor to define how the dig ital video recor der responds to th e detected vid eo loss for the cameras. There are up to 4 V ideo Loss Actions that co rrespond to 4 Alarm Outputs for mo st applications.
Administrato r’s Guid e and O perating Instruc tions 24 6.7 Hard Disk Full Ac tion Setup The Hard Disk Full Actions allow the a dministrator to define how the digital video recorder respo nds when the hard disk dr ive reaches the maximu m storag e capacity .
Administrato r’s Guid e and O perating Instruc tions 25 !" Alarm Out – T o define which Alarm Output will be trig gered when the hard disk capacity is fu ll. NC and NO sig n als are available, please refer to Alarm Out S etup. Click on the Down arrow butt on to select one of the Alarm Ou tputs (AO 1-4).
Administrato r’s Guid e and O perating Instruc tions 26 6.8 Camera Setup The Camera Setup allows the adm inistrator to define the behaviors for each Camera at each T i m e T ype.
Administrato r’s Guid e and O perating Instruc tions 27 !" Installed – Check this item if the selected Camera is installed. If the selected Camera is installed, all the items in the Behaviors For Each Camera ar e settable. The default setting is installed.
Administrato r’s Guid e and O perating Instruc tions 28 Note 1 : The maxim um recording rate for the system is 25 FPS for P AL, 30 FPS for NTSC. If the total recording rate for all cameras is g reater than 25/30 FPS, the sy st e m wi ll decrease the recording rate for each came r a averag ely to make the total 25/30 F PS.
Administrato r’s Guid e and O perating Instruc tions 29 6.9 Alarm In Setup The Alarm In Setup allows the admin i strator to define the behav iors for each Alarm Input at ea ch T i me T y pe.
Administrato r’s Guid e and O perating Instruc tions 30 !" Normal State – NC or NO, please check the signal ty pes connected to the Alarm Input T erminal on the rear panel of the sy stem. Use the Down arrow b utton to select the signal ty pe.
Administrato r’s Guid e and O perating Instruc tions 31 6.10 Alarm Out Setup The Alarm Out Setup allows the administrato r to de fi ne the tag name for each Alarm Output. There are up to 2 Normally Closed (NC) signals (AO 1-2) and 2 Normally Open (NO) signals (AO 3-4) for the sy stem.
Administrato r’s Guid e and O perating Instruc tions 32 6.11 Display Sequence S etup The Display Sequence Setup allows the administrator to define the Sequence Mode d isplay . Please refer to Ch a p ter 4 for Sequence Mode display . F or the definition of the Display Pages in each Display Sequence, please refer to Display Page Setu p.
Administrato r’s Guid e and O perating Instruc tions 33 6.12 Display Page Setup The Display Page Setup allows the ad ministrator to define the Display Pag es in Sequence Mode display and Sta t ic Page Mode display (please refer to Chap ter 4).
Administrato r’s Guid e and O perating Instruc tions 34 !" St a t ic Pag e Mode – T o set the Display P a ges for Static Page Mode display . !" Sequen c e No – T o select the Sequence Number in Sequence Mode display . Use the Down ar r ow button to select t he number .
Administrato r’s Guid e and O perating Instruc tions 35 6.13 Motion Setup The Motion Setup allows the admin i s t ra t or to configur e how motion detection wor k s for each C amera at each T ime T y p e .
Administrato r’s Guid e and O perating Instruc tions 36 !" Camera – Use the Down arrow b utton to select the camera. !" T ime T ype - Use the Down arrow butt on to select the T i m e T ype. !" Set – T o set the Detection Area – active at down position .
Administrato r’s Guid e and O perating Instruc tions 37 6.14 Password Setup The Password Setup allows the administrator to set the new Log i n names a nd Password s for the Adm inistrator , Supervisor an d Opera t o r .
Administrato r’s Guid e and O perating Instruc tions 38 6.15 System Configurations The Sy stem Config urations Setup allows the administrator to set up the commu nication, printer model, E-Mail notification, day light saving time, TV sy stem and softwa re upg rade.
Administrato r’s Guid e and O perating Instruc tions 39 !" Gateway IP address – Enter t he corresponding IP address while the g ateway is ena bled. !" Domain Name Server IP Address – E nter the correct Domain Name Server for m ap ping Domain Names to IP a ddr esses.
Administrato r’s Guid e and O perating Instruc tions 40 " " " Mail –T o define the setting of the E-m ail notification func tion. The " " " "" " following dialog box will be shown on the screen after the Mail item is selected.
Administrato r’s Guid e and O perating Instruc tions 41 North America – Cloc k s are turned forward an hour begins at 2 a.m. on the first Sunday in April, time reverts to standard time at 2 a.m. on the last S unday in October . European Unio n – C locks are turned forward an hour begins at 1 a.
Administrato r’s Guid e and O perating Instruc tions 42 7. Date/Time Setup ( Administrator) If y ou are an Administ rator , please click o n the Time displaying on the Main Screen to enter the Date/Tim e Setup for t he sy stem. The date is in YYYY/M M/DD format, whilst th e time in military hour format (HH:MM:SS).
Administrato r’s Guid e and O perating Instruc tions 43 8. Image Playback and Archive ( Administrator , Super visor) On the Main Screen, please click on the Play back Pa nel icon, the scre en will b.
Administrato r’s Guid e and O perating Instruc tions 44 Select HDD & Range – T o select the play back Hard Disk and t he play back range in that Hard Disk. Cl ick on it, and the Select HDD & Rang e dialog box will be sh own on the scre en as desc ribed in the next par agr aph.
Administrato r’s Guid e and O perating Instruc tions 45 Replay – T o repeat play ing the selected video over an d over ag ain when the button is at DOW N posi tion. Speed – Th e play ing speed, rang ing fr om 1/6 (slowe st) throug h 5 (fastest).
Administrato r’s Guid e and O perating Instruc tions 46 8.1 Select HDD & Range Dialog Box W h en the user click on t he Select HDD & Range icon on the Playba ck Pan el, the Select HDD & Range dialog box wil l be shown on the screen. The system provides user to search the image either by HDD location o r by time.
Administrato r’s Guid e and O perating Instruc tions 47 !" Start/End Section No – 32 MB/Section or 32 Slices/Section for the sy stem. Use the Down arrow button to sel e ct the Start/En d Section No. !" Start/End Slice No – 1 MB/Sl ice for the system.
Administrato r’s Guid e and O perating Instruc tions 48 T o search b y time, th e diagram will be shown as below . Use the Down arro w to select the desired start d a t e and time, click on the Submit butt on to start searching. The other items are the same as the above descr iption.
Administrato r’s Guid e and O perating Instruc tions 49 9. Remote C ontrol Through Local Network, Intranet, Internet or dial-in fu nctions, users are able to vie w the live video, ima ge pla y back and uplo ad/download the config urat i on f ile of EDR400 fr om any PC in any where.
Administrato r’s Guid e and O perating Instruc tions 50 The vi deo imag e can be display ed in full or quad screen mode, an d the time shown on each window refers to the time o n EDR400 system clock. The following is the b rief description of each it e m abov e.
Administrato r’s Guid e and O perating Instruc tions 51 window . (Note.3) / – The next/previo us single ima ge c orrespo nds to the selecte d play back ca meras will be play ed and display ed on its cor responding video win dow . – T o pause the playback imag e.
Administrato r’s Guid e and O perating Instruc tions 52 Appendix A – Specifications Vi d e o F o r m a t NTSC/EIA or P AL / CCI R, auto-sensing & manua l switch Vi d e o I n p u t 4 camera inp.
Administrato r’s Guid e and O perating Instruc tions 53 Appendix B – Time Lapse Mode Recording Time EDR400 Tim e Lapse Mode Recording Time (system storage: 60GB) (Estimate d w ith typical imag e .
Administrato r’s Guid e and O perating Instruc tions 54 PA L / J P E G T otal Capture Rate Fin e(10) Normal(5) Rough(0 ) (FPS) day hour min day hour min day hour min 25 1 8 21 2 14 58 5 2 38 12.
Administrato r’s Guid e and O perating Instruc tions 55 Appendix C – Simulated Keyboard There are situati ons that the user wi ll be asked to enter a numeric or alphanumeric string. So, a Simulated Key board is d e si g ned for t he user to use th e mouse for all the operatio ns.
Administrato r’s Guid e and O perating Instruc tions 56 Q: How to setup event recording? A: Please setup the Alarm Recording rates for the Cameras at differe nt Time T y pes, the different Ac t ions, and the enable/disable items for the Cameras and the Alarm Inputs.
P/N: M DR4G0010 0 EverFocus ® EverFocu s Electronics Cor p. Head Of fi ce: 12F , No.79 Sec. 1 Shin-T ai W u Road, Hsi-Chi, T aipei, T aiwan TEL : 88 6-2-26982 334 F AX : 886-2 -269823 80 USA Of fice: 2445 Hunting ton Drive, San Marino , CA 91 1 08, U.
デバイスEverFocus eDR400の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
EverFocus eDR400をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはEverFocus eDR400の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。EverFocus eDR400の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。EverFocus eDR400で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
EverFocus eDR400を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はEverFocus eDR400の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、EverFocus eDR400に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちEverFocus eDR400デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
