ExcaliburメーカーGAMETIMETM 750GT-2の使用説明書/サービス説明書
ページ先へ移動 of 28
GameTime ™ II INSTRUCTION GUIDE Model 750GT-2.
2 CONGRATULATIONS! The GameTime™, manufactured and designed by Excalibur Electronics, is the best timekeeper for any activity where time is critical in two-player games. It offers a wide variety of preset game options that cover just about every situa - tion you can think of.
TABLE OF CONTENTS 1. Quick Start How about a nice game of Chess? 5 How about a nice crossword game? 6 How about a nice game of Go? 7 2. Introduction Getting acquainted with GameTime™ 8 3. Preset Time Controls The only options you may ever need 12 4.
OK, now that the batteries are in…. The unit will beep when batteries are installed. If it does not beep, please use a pointed object and press the ACL button recessed on the bottom of the unit.
rect the problem, check battery installation. Numbers will appear on the display panel, if they don’t, adjust the brightness control wheel (see diagram, facing page).
7. Slide the PAUSE/PLAY switch PLAY. 8. Black now presses his plunger to start your “White’s clock. This is very impor - tant. Every move, including White’s first, must be counted! (Your clock’s move counter relies on this rule.
front of the time to indicate it is displaying overtime time. Generally, word game tournaments allow 25 minutes per player. This corresponds to PRESET 14 . You need not worry about the DELAY feature, since selecting WORD mode will eliminate the Chess DELAY feature.
Follow this procedure to set your clock for a Go tournament game: 1. Level GameTime’s™ PLUNGERS . 2. Slide the PAUSE/PLAY switch to PAUSE . 3. Reset GameTime™ by holding down the ON/OFF button on the underside of the clock for a few seconds. Now release the button and press it again to turn GameTime™ on.
don’t, adjust the brightness control wheel (see diagram on page 4). Once over quickly Let’s take a quick look at the GameTime’s™ controls, shown on page 4. When you’re playing a game, the display panel shows the time remaining for each player, the number of moves made so far, and similar details.
3. Reset GameTime™ by holding down the ON/OFF button on the underside of the clock for a few seconds. Now release the button and press it again to turn GameTime™ on. 4. Set which player moves first by pressing the WHITE button. Use the + button to switch which side the word FIRST appears in the display.
for example, a tournament director or referee must subtract time from a player’s clock as the result of a penalty.) 1. Slide the PAUSE/PLAY switch to PAUSE . 2. Press SELECT to display the time remaining. You can first adjust the number of seconds remaining for the clock on the left.
GameTime™ offers. Then dip into Chapter 4 for an explanation of the most common options you’ll want to set from day to day. Tackle Chapter 5 and 6 when you’re ready to start selecting your own time controls and want to learn more about the advanced options.
lasts no more than four hours – a three-hour playing session (90 minutes for each player), followed by a one-hour sudden-death session (30 minutes for each player).
CHAPTER 4. ADDITIONAL GAME OPTIONS Getting the most out of GameTime™ This chapter describes the many game options that make the GameTime™ a powerful tool for both casual and tournament games. Here’s what you can do: • Set a count-down delay. • Control how time forfeits are handled.
delay gives a player just enough time to make the routine moves that it would take to ensure a win in such a situation. At this writing, USCF’S rules call for a delay of two seconds for “Speed Chess” time controls up to, but not including G/10. For controls G/10 to G/29 (called “Quick Chess”), the delay is three seconds.
you cannot only save a game, you can play other games while the adjourned game remains in memory. You can keep only one game in memory at a time. Saving a game erases the previously saved game. Changing batteries also erases any saved game. To save a game in progress: 1.
GameTime™ continues to keep track of moves even when the counter is hidden. Ending a game after a specified number of moves GameTime™ can end a game after a specified number of moves. After the specified move number the clock will show a forfeit. 1.
2. Press the SELECT button until you see the word ACCUM on the display. 3. Use the + button to select On or OFF . 4. Press VERIFY or slide the PAUSE/PLAY switch to PLAY . Turning GameTime’s™ beep sound off The GameTime™ beeps when a player loses a game by failing to meet a time control.
To control the DELAY or ACCUM scope: 1. Slide the PAUSE/PLAY switch to PAUSE 2. Press SELECT until you see the words DELAY (or ACCUM) and ALL in the display. 3. Use the + button to SELECT On or OFF . SELECT On to apply the count-down delay (or bonus time) to any primary and secondary time controls you’ve set in addition to sudden-death.
1. Slide the PAUSE/PLAY switch to PAUSE . 2. Press the SELECT button until you see the word SECOND on the display. 3. Use the + button to select OFF or On . 4. Press VERIFY or slide the PAUSE/PLAY switch to PLAY . CHAPTER 5. CUSTOM TIME CONTROLS Setting your own time controls The GameTime’s™ presets offer the most common time controls.
left-hand clock for the PRIMARY time control. 5. Press SELECT and use the + and – buttons to enter the number of minutes on the left-hand clock. Holding the + or – buttons down will make the numbers change rapidly. 6. Press SELECT and use the + and – buttons to enter the number of seconds on the right-hand clock.
added to your opponent’s clock, and vice versa. Customizing Hour Glass time OR Cancelling Hour Glass Preset Once you have selected preset HG , and before you start your game by switching to PLAY mode, you can customize how much time you want to use for the Hour Glass preset.
However, unlike SUDDEN death in Chess, the game does not end when the main time control has ended. Instead when the player uses all of their time, the player enters an overtime time control. GameTime™ turns on a FLAG near the time of the player that enters overtime.
will turn on near their time indicating overtime. For the second time control (overtime), each player receives a number of stones equal to the move count for the second time control. You have a specified amount of time to play those stones. For example, preset 88 is G/30m 30/5m, which gives you 30 minutes of initial thinking time.
3. Reset GameTime™ by holding down the ON/OFF button on the underside of the clock for a few seconds. Now release the button and press it again to turn GameTime™ on. 4. Press the SELECT button to see the word PRESET on the display. 5. Use the + and – buttons to change the preset number to 14 .
26 NOTES.
27 APPENDIX A..
28 EXCALIBUR ELECTRONICS, INC., war - rants to the original consumer that its products are free from any electrical or mechanical defects for a period of ONE YEAR from the date of purchase. If any such defect is dis - covered within the warranty period, EXCAL - IBUR ELECTRONICS, INC.
デバイスExcalibur GAMETIMETM 750GT-2の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Excalibur GAMETIMETM 750GT-2をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはExcalibur GAMETIMETM 750GT-2の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Excalibur GAMETIMETM 750GT-2の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Excalibur GAMETIMETM 750GT-2で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Excalibur GAMETIMETM 750GT-2を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はExcalibur GAMETIMETM 750GT-2の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Excalibur GAMETIMETM 750GT-2に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちExcalibur GAMETIMETM 750GT-2デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
