ExmarkメーカーOCD01の使用説明書/サービス説明書
ページ先へ移動 of 28
® MFG. CO . INC. Part No. 109-4823 Rev. B.
i EXMARK PA RTS PLUS ® PROGRA M EFFECTIVE DATE: September 1, 1995 Program If your Ex mark dealer does not have the Ex mark part in stock, Exmark w ill get the parts to the dealer the next business day or the part will be FREE* Guaranteed!! How the Program Works 1.
ii OPERA TOR'S M A NUA L This manual cont ains assem bly, oper at ing , maintenance, adj ust m ent, and safet y instructions f or your Exmark O CD01.
iii TA BLE OF CONTENTS 1 . S A F E T Y P A G E 1.1 Safety Ale rt Sy mbol ....................................................................................... 1 1.2 Trai ning ..........................................................................
1 1. SA FETY 1.1 SA FETY A LERT SYMBOL This SAFET Y ALERT SYMBOL is used both in this manual and on the m achine t o identif y import ant safety messag es w hich must be f ollowed to avoid accidents.
2 1.3.2 The use of per sonal pr ot ective equipment, such as (but not limited to) prot ect ion for t he eyes, ears, feet, and head is recommended. CA UTION POTENT IAL HAZARD ♦ The mower that t he OCD01 attaches to produces sound levels in excess of 85 dBA at the operat or ’s ear when in operation.
3 1.5.5 Safety signs m ay be af fixed by peeling off the backing t o expose the adhesive surf ace. Apply only to a clean, dry surf ace. Smooth t o r em ove any air bubbles. 1.5.6 Familiarize yourself with the f ollowing saf ety signs and instruction labels.
4 3. A SSEMBLY INSTRUCTIONS IMPORTA NT: Disengage blade, shut of f engi ne, wai t f or al l moving parts to stop, engage parking brake, remove key, and disconnect the w ire from the spark plug before servicing, cleani ng, or making any adjustments to the uni t .
5 3.2 INSTA LLING OCD0 1 TO THE MOWER DECK 3.2.1 Remove discharge chute f rom deck. For UltraCut Decks: Remove and discard discharge chute and hardware. Deck s w ith serial numbers 669,999 and lower req uire a flexible discharge chut e, kit # 109-3860.
6 3.2.5 Install the cable brack et (item 1) by the f oot pedal and leave the hardware loose. Use the correct m ount ing holes as shown in Figure 5A. FIGURE 5A FIGURE 5B 3.2.6 Install cable. Make sure the nut s ar e centered as shown in Figure 6. FIGURE 6 3.
7 FIGURE 7 3.2.9 If ther e are protruding welds on the discharg e opening, gr ind t hem f lush. NOTE: A ny wel ds l eft protruding from t he face of the discharge opening coul d interfere w ith free operat ion of the discharge gate. For Triton decks only : Install t he block er plate (item 17) as shown in Figur e 8.
8 3.2.11 Hook t he g ate assembly (item16) t o t he gate linkag e assembly (item 12). I nstall the washer (item15) and f asten with the hairpin (item 14) as shown in Figur e 10.
9 FIGURE 11B FIGURE 11C For 46”-60” Triton decks : a) Locate the corr ect mounting hole as shown in Figure 11D. I nstall two 5/16-18 x 1 bolts (item 13) and f asten to the deck w ith washer (item 6) and nyloc nut (item 2).
10 FIGURE 11E For 66” & 72” Triton decks: a) Install two 5/16-18 x 1 bolts ( item 13) and fasten t o t he deck with w asher (item 6) and nyloc nut (item 2) as shown in Figur e 11E. Dr ill Ø .375 hole in the deck t o mate up with the g at e link age assembly (item 12) w here shown in Figure 11F.
11 3.2.14 Slide the brack et that is shown in Figure 6, back and fort h t o adj ust the cable tension. Tak e up t he slack in the cable, but it should not be taut. Tig hten hardware to retain the bracket . 3.2.15 W hen pushing on t he spr ing, there should be a 1/16” gap between the spring and the blocker pivot plat e assem bly.
12 G0972 3.2.18 Remove the discharge chut e bracket f rom the discharg e chut e and retain hardware. Use the appropriat e t emplate provided as a guide to cut of f t he lip. Follow steps a) throug h d) . For UltraCut 52” -60” use templat e 109- 4091.
13 G0938 G09 45 c) Remove remaining lip as shown in Figure 16C. FIGURE 16C FIGURE 16D CHUTE WITH LIP CHUTE WITH LIP REMOVE D d) Using t he existing har dware, r einstall the discharge chut e br acket into the f lexible discharge chut e as shown in Figure 17.
14 4. OPERA TION IMPORT A NT : Always mow w it h t he f lexible discharge chute installed and in t he dow n position. DA NGER POTENT IAL HAZARD ♦ An uncovered discharge opening will allow objects to be thr own in an operator’s or bystander ’s dir ect ion.
15 4.1 OPENING THE DISCHA RGE GA TE 4.1.1 Press the pedal into t he f orward lock position and t he dischar g e gate will be open. FIGURE 18 4.2 CLOSING THE DISCHA RGE GA TE 4.2.1 Depress the lower tab to unlock the pedal. Then t he dischar g e gate will then close off the discharg e opening .
16 5. A DJUSTM ENTS IMPORTA NT: Disengage blade, shut of f engi ne, wai t f or al l moving parts to stop, engage parking brake, remove key, and disconnect the w ire from the spark plug before servicing, cleaning, or maki ng any adjustments to the uni t.
17 7. PA RTS LIST 7.1 OCD01 A SSEM BLY Item Part No . Descr iption Qty. 1 109-3603 Asm , Gate Linkage W /Dec al s ..... . ..... . . .. 1 2 109-3605 Asm, Gate ...... ...... ..... ...... ...... ..... ...... .... 1 3 109-3880 Asm , Cable Brack et W/ Decal .
18 7.2 COMPONENTS FOR 109-3603 ASSEMBLY Item Part No . Descr iption Qty. 1 1-403005 Decal, Danger ..... ..... ...... ..... ...... ..... ...... 1 2 98-5954 Decal, Danger . ..... ...... ..... ...... ..... ...... .... 1 3 109-3600 Link, Gate .... ..... .
19 7.3 COMPONENTS FOR 109-3884 ASSEMBLY Item Part No . Descr iption Qty. 1 109-3608-01 Brac k et, Pedal Pi vot .... . . ..... . ..... . ..... . . .... 1 2 109-3609-01 P edal, Gate ... ...... ..... ...... ...... ..... ...... ..... 1 3 109-3610 Rod, Pedal Link .
20 8. 2-Ye ar Limited Wa rranty Exmark Tu rf Equipment (For units pur chased on or after October 1, 2004) Conditions and Products Covered Exmark M fg. Co.
21 NOTES.
22 SERVICE RECORD Date Descripti on of Work Done Service Done By.
23.
® M FG . CO . IN C. SEE EXMA RK’S COMPLETE LINE OF A CCESSORIES RIDING A CCESSORIES CUSTOM RIDE SEAT SUSPENSION SYSTEM DECK LIFT ASSIST KIT HITCH KIT LI GHT K IT MICRO-MULCH SY ST EM ROLL OVER PROT.
デバイスExmark OCD01の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Exmark OCD01をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはExmark OCD01の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Exmark OCD01の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Exmark OCD01で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Exmark OCD01を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はExmark OCD01の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Exmark OCD01に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちExmark OCD01デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
