Extron electronicメーカー10 PLUSの使用説明書/サービス説明書
ページ先へ移動 of 30
User's Manual MODEL 10 PLUS MODEL 8 PLUS SWITCHERS.
.
Contents Model 8/10 PLUS Introduction and Specifications ............. Chapter 1 About this Manual ................................................................. 1-1 F acts and Features ..............................................................
Extron • Model 8 PLUS & Model 10 PLUS Switchers • User’s Manual Legend of Icons The following icons may be used in this manual: ___ Important information – for example, an action or a step that must be done before proceeding. ___ A Warning – possible damage could occur.
Extron • Model 8 PLUS & Model 10 PLUS Switchers • User’s Manual 1 Extron’s Model 8/10 PLUS Switchers User’s Manual Chapter One Model 8/10 PLUS Switcher Introduction Features Specificatio.
Extron • Model 8 PLUS & Model 10 PLUS Switchers • User’s Manual Introduction About This Manual This manual includes operation, configuration and option information for the Model 8 PLUS and Model 10 PLUS (Model 8/10 PLUS) Switchers.
Extron • Model 8 PLUS & Model 10 PLUS Switchers • User’s Manual The Model 10 PLUS front and back panels are shown below. Page 1-2 Model 8/10 PLUS Introduction and Specifications Description of Features Outputs – Because switching is direct, the output will always have the same format as the selected input.
Extron • Model 8 PLUS & Model 10 PLUS Switchers • User’s Manual Specifications General Operation Temperature .... 0°-50° C Storage Temperature .... -20°-70° MTBF Demonstrated .... 30,000 Hours Approvals .... UL Listed, CSA, CE Dimensions .
Extron • Model 8 PLUS & Model 10 PLUS Switchers • User’s Manual 2 Extron’s Model 8/10 PLUS Switchers User’s Manual Chapter T wo Model 8/10 PLUS Switcher Operation and Installation Switch.
Extron • Model 8 PLUS & Model 10 PLUS Switchers • User’s Manual Page 2-1 Model 8/10 Switcher Operation The Model 8/10 PLUS switchers enable the output to be switched from anyone of 8 or 10 i.
Extron • Model 8 PLUS & Model 10 PLUS Switchers • User’s Manual Page 2-2 1 23 456 789 1 0 Rear Panel The following descriptions are keyed* to the Model 10 rear panel drawing below. A There are four BNC connectors per input. The Model 8 PLUS and Model 10 PLUS switchers have 8 and 10 sets of input connectors.
Extron • Model 8 PLUS & Model 10 PLUS Switchers • User’s Manual Model 8/10 PLUS Switcher Installation Guide The recommended installation procedure for the Model 8 PLUS and Model 10 PLUS Switchers is: 1.
Extron • Model 8 PLUS & Model 10 PLUS Switchers • User’s Manual Page 2-4 _ The S-Video output from the SVHS VCR would most likely require a user supplied S-Video to BNC adapter to connect to the Model 8 PLUS or Model 10 PLUS switcher. The Extron Part Number for an adapter of this type is 26-353-01 .
Extron • Model 8 PLUS & Model 10 PLUS Switchers • User’s Manual Page 2-5 Model 8/10 PLUS Operation and Configuration Output Select DIP Switch Setting As mentioned earlier, the Output Select DIP switches must be set to define the video format of each input.
Extron • Model 8 PLUS & Model 10 PLUS Switchers • User’s Manual Page 2-6 12 3 4 567 8 Example Output Select DIP Switch Settings The diagram below shows five inputs of a Model 8 PLUS Switcher connected to the following devices: 1. SVHS VCR (S-Video output to switcher) 2.
Extron • Model 8 PLUS & Model 10 PLUS Switchers • User’s Manual Changing the Baud Rate The RS-232 protocol factory setting is 9600 baud, 8-bits, no parity, 1 start bit and 1 stop bit. The position of internal rotary switch SW3 on the main controller board controls the baud rate and parity.
Extron • Model 8 PLUS & Model 10 PLUS Switchers • User’s Manual Page 2-8 1234567891 0 Model 8/10 PLUS Switcher Connection to Computer To connect the Model 8/10 to a computer, refer to the picture below and connect the user supplied RS-232 cable from the computer (PC) serial port to the Model 8/10 PLUS Switcher connector labeled RS-232.
Extron • Model 8 PLUS & Model 10 PLUS Switchers • User’s Manual Notes:.
Extron • Model 8 PLUS & Model 10 PLUS Switchers • User’s Manual 3 Extron’s Model 8/10 PLUS Switchers User’s Manual Chapter Three Model 8/10 PLUS RS-232 Control Host/Switcher Communicatio.
Extron • Model 8 PLUS & Model 10 PLUS Switchers • User’s Manual Model 8/10 PLUS RS-232 Control The Model 8/10 PLUS switchers can be controlled through the RS-232 port by a Host device/system. The RS-232 connector location and pin assignments are shown in the drawing below.
Extron • Model 8 PLUS & Model 10 PLUS Switchers • User’s Manual Page 3-2 Command/Response Table Definitions and Abbreviations: = CR/LF · = space V = Input channel, T = Video Format, M = Maximum # of inputs, Q = Software v ersion ! = Delimiter character = Indicates end of input selection character string.
Extron • Model 8 PLUS & Model 10 PLUS Switchers • User’s Manual Page 3-3 Model 8/10 PLUS RS-232 Control Software The Model 8/10 PLUS Switcher control software is a program called UNIVSW. It is Windows® 3.1, 3.11 and Windows 95 compatible and provides remote control of input selection.
Extron • Model 8 PLUS & Model 10 PLUS Switchers • User’s Manual Page 3-4 Model 8/10 PLUS RS-232 Control 12 3 4 567891 0 SVHS VCR Model 10 PLUS Switcher w/PC RS-232 Control.
Extron • Model 8 PLUS & Model 10 PLUS Switchers • User’s Manual Notes:.
Extron • Model 8 PLUS & Model 10 PLUS Switchers • User’s Manual A Appendix A Configuring Features and Options Remote Connector KP-10 Remote Control IR-10 Remote Control Rack Mounting Extron.
Extron • Model 8 PLUS & Model 10 PLUS Switchers • User’s Manual MANUAL REMOTE Connector The MANUAL REMOTE connector provides a way to control the Model 8/10 PLUS switchers using Extron or third party remote control devices.
Extron • Model 8 PLUS & Model 10 PLUS Switchers • User’s Manual Page A-2 Configuring Features and Options KP-10 Remote Control The optional E XTRON KP-10 hard wired remote controller consist.
Extron • Model 8 PLUS & Model 10 PLUS Switchers • User’s Manual IR-10 Infrared Remote Control The optional E XTRON IR-10 infrared (IR) remote control is a hand held unit. It communicates with the Model 8 PLUS and Model 10 PLUS switchers through an external IR detector that is connected to an adapter.
Extron • Model 8 PLUS & Model 10 PLUS Switchers • User’s Manual Rack Mounting The Model 8 PLUS and Model 10 PLUS switchers can be rack-mounted using an optional 19" 2U Universal Rack Shelf, one switcher per shelf. The Extron Part Number for the Universal Rack Shelf is 60-032-01 .
Extron • Model 8 PLUS & Model 10 PLUS Switchers • User’s Manual Page A-5 Accessories/Part Numbers Model 8 PLUS Switcher .............................................. 60-094-01 Model 10 PLUS Switcher .........................................
デバイスExtron electronic 10 PLUSの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Extron electronic 10 PLUSをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはExtron electronic 10 PLUSの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Extron electronic 10 PLUSの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Extron electronic 10 PLUSで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Extron electronic 10 PLUSを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はExtron electronic 10 PLUSの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Extron electronic 10 PLUSに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちExtron electronic 10 PLUSデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。