Extron electronicメーカー4LDXIの使用説明書/サービス説明書
ページ先へ移動 of 76
EQ 100 Video Equalizer 68-162-01 Printed in USA System 4 xi Series System 4LQ xi • Switcher/Line Quadrupler System 4LD xi • Switcher/Line Doubler.
This symbol is intended to alert the user of important operating and maintenance (servicing) instructions in the literature provided with the equipment. This symbol is intended to alert the user of the presence of uninsulated dangerous voltage within the product's enclosure that may present a risk of electric shock.
Contents Extron • System 4 xi Switcher Series • User’s Manual System 4 xi Switcher Series Getting Started.......... tt Step 1 uu If the System 4 xi is already configured for your model of projector, go to Step 4 . If it is not set up correctly, it will be necessary to change switch settings on the System 4 xi ’s Main Controller Board.
Extron • System 4 xi Switcher Series • User’s Manual Contents.
Contents Extron • System 4 xi Switcher Series • User’s Manual CONTENTS Chapter One - System 4 xi Series - Introduction and Features Introduction to System 4 xi .....................................................................................
Extron • System 4 xi Switcher Series • User’s Manual Contents ii System 4 xi Series LCD Menus .............................................................................................. 3-12 Special Functions .................................
Contents Extron • System 4 xi Switcher Series • User’s Manual iii V erkabelung vom System 4 innerhalb eines Gestells ............................................................. B-6 Upgrading Main Controller Board Software and Battery Replacement .
Extron • System 4 xi Switcher Series • User’s Manual Contents.
1 System 4 xi Switcher Series User ’ s Manual Introduction and Features System 4 xi Features Projector/Monitor Applications RGB Decoder , Line Doubler and Line Quadrupler Specifications Chapter One.
Chapter 1 • Introduction and Features Extron • System 4 xi Switcher Series • User’s Manual OUTPUT PJ COMM RS 232 AUDIO AUDIO AUDIO AUDIO AUDIO H/HV R/C G/Y B R/C G/Y B V INPUT 4 H/HV V R/C G/Y.
Chapter 1 • Introduction and Features Extron • System 4 xi Switcher Series • User’s Manual System 4 xi Features Universal Video Inputs The System 4 xi has four universal inputs, each capable of accepting all computer RGB signals from 15 kHz to 150 kHz, any composite video standard signals (NTSC or PAL) and S-video (S-VHS) signals.
Chapter 1 • Introduction and Features Extron • System 4 xi Switcher Series • User’s Manual Multiple Switcher Applications The features of the System 4 xi can be further expanded by connecting the output from another switcher to Input #4.
Chapter 1 • Introduction and Features Extron • System 4 xi Switcher Series • User’s Manual 1-4 Specifications Video input Number/type .............................. 4 universal inputs (RGBHV, RGBS, RGsB, RsGsBs, S-video, composite video) Connectors .
Chapter 1 • Introduction and Features Extron • System 4 xi Switcher Series • User’s Manual 1-5 Audio output Number/type .............................. 1 stereo, balanced/unbalanced Connectors ................................ 5 mm captive screw terminal, 6 conductor Impedance .
System 4 xi Switcher Series User ’ s Manual Configuration and Installation Rear Panel Connectors and Indicators Projector/Monitor Applications Removing the Cover Setting the Main Controller Board Ra.
Extron • System 4 xi Switcher Series • User’s Manual Chapter 2 • Configuration and Installation 2-1 OUTPUT PJ COMM RS 232 AUDIO AUDIO AUDIO AUDIO AUDIO H/HV R/C G/Y B R/C G/Y B V INPUT 4 H/HV .
Extron • System 4 xi Switcher Series • User’s Manual Chapter 2 • Configuration and Installation Projector/Monitor Applications The System 4 xi can be configured for most projectors.
Extron • System 4 xi Switcher Series • User’s Manual Chapter 2 • Configuration and Installation 1. The System 4 xi must be configured internally for the projector/monitor to be used. This is done at the factory when the unit is ordered, and a label is placed on the rear panel to identify the configuration.
Extron • System 4 xi Switcher Series • User’s Manual Chapter 2 • Configuration and Installation 4. Place the System 4 xi on a clean work space and remove eight (8) screws shown in Figure 2-4. 5. Lift the cover straight up. 6. Go to the procedure for which you have opened the cover (projector configuration or changing the fuse).
Extron • System 4 xi Switcher Series • User’s Manual Chapter 2 • Configuration and Installation 2. If your unit is not set up correctly, remove the System 4 xi cover (page 2-3) and locate the switches and projector connectors. Note the orientation of the SW1 switches in the picture.
Extron • System 4 xi Switcher Series • User’s Manual Chapter 2 • Configuration and Installation Figure 2-7. Tie Cables to Prevent Pulling Down on the Units _________ Be sure that no weight is added to the System 4 xi in excess of 10 lbs (3.73 kg).
Extron • System 4 xi Switcher Series • User’s Manual Chapter 2 • Configuration and Installation TIP SLEEVE RING + - TIP SLEEVE RING TIP SLEEVE 2-7 • Unbalanced High Impedance (High Z) Stereo.
System 4 xi Switcher Series User ’ s Manual Using the System 4 xi Front Panel Front Panel Buttons and Indicators Picture Controls for Line Doubler and Line Quadrupler Examples for Using Some of the .
Extron • System 4 xi Switcher Series • User’s Manual Chapter 3 • Using the System 4 xi Front Panel B REAKAWAY The Breakaway button allows the audio and video signals to be separated from (Breakaway) or combined with (Follow) each other to the output.
Extron • System 4 xi Switcher Series • User’s Manual Chapter 3 • Using the System 4 xi Front Panel Default LCD Screen When the System 4 xi is powered up, a Title screen appears briefly, followed by the Default display. Examples are shown to the left.
Extron • System 4 xi Switcher Series • User’s Manual Chapter 3 • Using the System 4 xi Front Panel Menu Controls and Navigation Figure 3-7 on page 3-12 shows a flowchart of all the menus. Use it as a road map or guide to get to a specific one.
Extron • System 4 xi Switcher Series • User’s Manual Chapter 3 • Using the System 4 xi Front Panel Example of Using the Menu Controls Suppose we have a System 4LD xi and want to set up Input #2 for line-doubled, motion video in a VGA format with separate horizontal and vertical sync, negative polarity and serration pulses.
Extron • System 4 xi Switcher Series • User’s Manual Chapter 3 • Using the System 4 xi Front Panel Menu #6 is used to set up composite or separate horizontal and vertical sync for line-doubled/quadrupled images. Follow the numbers in the diagram and continue.
Extron • System 4 xi Switcher Series • User’s Manual Chapter 3 • Using the System 4 xi Front Panel 3-6 Menu #7 is used to set up Demo and VGA modes. ❶ Press to get the Menu Select LCD (Menu #0). ❷ From Menu #0, press or to go to Menu #7. ❸ Press to select this menu.
Extron • System 4 xi Switcher Series • User’s Manual Chapter 3 • Using the System 4 xi Front Panel 3-7 0. Menu Select/Exit Menu The Menu button ( )brings up the Menu Select/Exit screen. This is the starting point to get into any of the Control Menus.
Extron • System 4 xi Switcher Series • User’s Manual Chapter 3 • Using the System 4 xi Front Panel 3-8 When a change is selected, but not yet saved, the selection blinks. Press to save the selection to memory. Repeat the above for other input channel numbers.
Extron • System 4 xi Switcher Series • User’s Manual Chapter 3 • Using the System 4 xi Front Panel 3-9 5. Slave Configuration Menu Use to get to this menu, and then press to select it. Menu 5 is used only to set up the System 4 xi for use with a slave switcher.
Extron • System 4 xi Switcher Series • User’s Manual Chapter 3 • Using the System 4 xi Front Panel 3-10 Pressing an Input Button at any time will Exit to Default Menu.
Extron • System 4 xi Switcher Series • User’s Manual Chapter 3 • Using the System 4 xi Front Panel 3-11 Horizontal Shift Control This is for line doubled/line quadrupled signals only. Press H S HIFT to bring up this menu. The current Horizontal Shift setting will be displayed.
Extron • System 4 xi Switcher Series • User’s Manual Chapter 3 • Using the System 4 xi Front Panel Figure 3-7. System 4 xi Display Menu Flow Chart 3-12 SWITCH SLA VE >CHL 4= RGBS INFORMA TION >SYS 4 LD , V3.11 LD CFG >VGA MODE =>ON Title Menu SYSTEM 4LD EXTRON V3.
Extron • System 4 xi Switcher Series • User’s Manual Chapter 3 • Using the System 4 xi Front Panel Special Functions Other functions that can be accessed, using the Front Panel, are described below. System Reset The System 4 xi can be restored to factory settings at any time from the default menu.
System 4 xi Switcher Series User ’ s Manual Connecting Multiple Switchers Looping the System 4 xi (Master/Slave) Input Channel Addressing SW4 ARMX or SW6 ARMX as Slave to System 4 xi System 8/10 P L.
Extron • System 4 xi Switcher Series • User’s Manual Chapter 4 • Connecting Multiple Switchers Looping the System 4 xi with Other Switchers The System 4 xi can be interconnected, or “looped” with other switchers to allow for a greater number of inputs to be switched to the projector.
Extron • System 4 xi Switcher Series • User’s Manual Chapter 4 • Connecting Multiple Switchers Controlling Master/Slave Switchers When a host system is controlling a System 4 xi with a switcher as a slave, a special 9-pin T-Connector cable, called a “ System 4 xi Slave Adapter” is necessary.
Extron • System 4 xi Switcher Series • User’s Manual Chapter 4 • Connecting Multiple Switchers System 4 xi with SW4/6 ARMX Switchers The picture in Figure 4-2 shows an SW6 ARMX as an example, although it would also apply to an SW4 ARMX. Connect the video output of the ARMX switcher (SW4 or SW6) to the last (4th) input of the System 4 xi .
Extron • System 4 xi Switcher Series • User’s Manual Chapter 4 • Connecting Multiple Switchers System 10 Plus Rear Panel Audio* OUTPUT PJ COMM RS-232 AUDIO AUDIO AUDIO AUDIO AUDIO H/HV R/C G/Y.
Extron • System 4 xi Switcher Series • User’s Manual Chapter 4 • Connecting Multiple Switchers System 10 Plus Audio* Audio* Rear Panel OUTPUT PJ COMM RS-232 AUDIO AUDIO AUDIO AUDIO AUDIO H/HV .
Extron • System 4 xi Switcher Series • User’s Manual Chapter 4 • Connecting Multiple Switchers System 8/10 P LUS Switch Settings From the front access panel on the System 8/10 P LUS , do the following: 1. On DIP switch block SW15, set switches #6 and #8 ON.
Extron • System 4 xi Switcher Series • User’s Manual Chapter 4 • Connecting Multiple Switchers Programming the System 4 xi Looping Configuration After making all the connections for a master/ slave system, turn power on for all the units involved and access Menu 5 (Slave Cfg).
System 4 xi Switcher Series User ’ s Manual Using Windows ® Control Software Installing the Windows Software Using Help Examples System 4 xi Stand-alone System 4 xi with Slave Executive Mode 5 Chap.
Extron • System 4 xi Switcher Series • User’s Manual Chapter 5 • Using Windows® Control Software SYSTEM SWITCHER Help Extron System Switcher Control Software This chapter is dedicated to using Extron’s “Windows Control Program for System Switchers via RS-232” software.
Extron • System 4 xi Switcher Series • User’s Manual Chapter 5 • Using Windows® Control Software System 4 xi Help The fastest way to learn what each Windows® function does is through the Help menus. At any time, help is available by double-clicking the Help icon (previous section), pulling down the Help menu or by pressing F1.
Extron • System 4 xi Switcher Series • User’s Manual Chapter 5 • Using Windows® Control Software Windows Control Panel Examples: As mentioned earlier, the window panels have the same functions as the System 4 xi front panel. Figure 5-4 shows four input buttons for the System 4 xi , while Figure 5-5 shows 11 inputs.
Extron • System 4 xi Switcher Series • User’s Manual Chapter 5 • Using Windows® Control Software P ICTURE C ONTROLS – Depending upon the model of your System 4 xi , there are three, four or five controls that correspond to the Picture Controls on the System 4 xi front panel.
Extron • System 4 xi Switcher Series • User’s Manual Chapter 5 • Using Windows® Control Software 5-5 • Slaves – Choose the type of slave switcher input. • Sync Configuration – Choose sync on green, separate sync, etc. • RGB Delay – Set/view time delay value for switching RGB signals after sync.
A System 4 xi Switcher Series User ’ s Manual Appendix A RS-232 Programming Guide RS-232 Interface Simple Instruction Set Advanced Instruction Set Programming Commands Programming Examples.
Extron • System 4 xi Switcher Series • User’s Manual Appendix A • RS-232 Programmer’s Guide Programming the System 4 xi Series Switchers This section covers the commands for a host to setup and control a System 4 xi series switcher through the RS-232 port.
Appendix A • RS-232 Programmer’ s Guide Extron • System 4 xi Switcher Series • User’s Manual A-2 System 4 xi -Initiated Messages When AC power is initially applied to the System 4 xi , the following System 4 xi - initiated messages (underlined) are sent to the Host: ¿ (C)COPYRIGHT 1997, EXTRON ELECTRONICS SYSTEM4LQxi, V4.
Extron • System 4 xi Switcher Series • User’s Manual Appendix A • RS-232 Programmer’s Guide A-3 Simple Instruction Set A simple command may be a single character typed on a keyboard and does not require any special characters before or after.
Appendix A • RS-232 Programmer’ s Guide Extron • System 4 xi Switcher Series • User’s Manual Simple Instruction List The table below lists the Simple Instruction Set commands, as well as response and data characters recognized by the System 4 xi .
Extron • System 4 xi Switcher Series • User’s Manual Appendix A • RS-232 Programmer’s Guide Simple Instruction Examples The tables that follow give examples of some of the ASCII codes that may be entered from a host device. The Switcher Response column shows what will be seen on the host ’s screen.
Appendix A • RS-232 Programmer’ s Guide Extron • System 4 xi Switcher Series • User’s Manual Switcher Commands ASCII Hex Switcher Response Result Description Freeze On F 46 ¿ Frz1 · ¿ Fre.
Extron • System 4 xi Switcher Series • User’s Manual Appendix A • RS-232 Programmer’s Guide Selecting Inputs Using Delimiters When selecting inputs to the projector, or display (Dsp) and/or the System 4 xi switcher (Sw), audio and video can be switched together (follow) or separately (breakaway).
Appendix A • RS-232 Programmer’ s Guide Extron • System 4 xi Switcher Series • User’s Manual A-8 Advanced Instruction Set The Advanced Instruction Set uses commands that are longer than one character because they are more complex than the Simple Instructions described earlier.
Extron • System 4 xi Switcher Series • User’s Manual Appendix A • RS-232 Programmer’s Guide A-9 Hex, Decimal and Binary Examples for Converting Range Values 1. The Audio range is C1h to FFh for -31dB to +31dB and 31dec = 1Fh. To calculate the mid-range (zero dB) add 31d to the low number.
Appendix A • RS-232 Programmer’ s Guide Extron • System 4 xi Switcher Series • User’s Manual A-10 Request Status - CMD5 (35h) This command requests the current system status. Because the command is asking for something, there is no need for any other parameters.
Extron • System 4 xi Switcher Series • User’s Manual Appendix A • RS-232 Programmer’s Guide Dsp Power 80h = Display device power is Off 81h = Display device power is On Dsp Mute 80h = Mute O.
Appendix A • RS-232 Programmer’ s Guide Extron • System 4 xi Switcher Series • User’s Manual Configure an Input Channel - CMD9 (39h) Send a preset configuration to the System 4 xi to set up an input channel.
Extron • System 4 xi Switcher Series • User’s Manual Appendix A • RS-232 Programmer’s Guide A-13 Request Input Channel Configuration - CMD10 (3Ah) 4 Request the configuration for a specific input channel in the System 4 xi .
Appendix A • RS-232 Programmer’ s Guide Extron • System 4 xi Switcher Series • User’s Manual A-14 Configure System - CMD11 (3Bh) 4 Configure the System 4 xi Format: ESC, CMD11, LD Sync, RGB .
Extron • System 4 xi Switcher Series • User’s Manual Appendix A • RS-232 Programmer’s Guide A-15 Request System Configuration - CMD12 (3Ch) 4 Request the System 4 xi Configuration.
B System 4 xi Switcher Series User ’ s Manual Appendix B Reference Information System 4 xi Related Parts List Changing the Main Fuse Upgrading the Software Backup Battery.
Appendix B • Reference Extron • System 4 xi Switcher Series • User’s Manual System 4 xi Related Parts List As illustrated below, the System 4 xi needs two additional parts to control a projector. 1. A Projector Communications Extension Cable (CC Cable) 2.
Appendix B • Reference Extron • System 4 xi Switcher Series • User’s Manual Projector Communication Extension Cables Connectors Part # CC 50' (50 ft.) 15/HD/M to 9/D/F 26-305-01 CC 50' Type II (50 ft.) 15/D/M to 15/D/F 26-323-01 CC 100' (100 ft.
Appendix B • Reference Extron • System 4 xi Switcher Series • User’s Manual Les c â bles fournis à l ’ utillsasteur Pour vos installations spécifiques, il vous est possible de choisir vos propres Câ bles de Communication pour Projecteur ( CC xx).
Appendix B • Reference Extron • System 4 xi Switcher Series • User’s Manual Câ bler un Syst è me 4 xi sur un rack Quand vous fixez les câbles d ’ une unit é à l ’ autre, veillez à ce que ces câbles ne soient pas “ supportés” par le systè me 4 xi .
Appendix B • Reference Extron • System 4 xi Switcher Series • User’s Manual Entfernung der System 4 xi Abdeckung Die Abdeckung des System 4 xi muß entfernt werden wenn für eine andere VDU eingerichtet, und dadurch Zugang zum Hauptcontroller ben ötigt wird, oder wenn die Hauptsicherung ausgetauscht wird.
Appendix B • Reference Extron • System 4 xi Switcher Series • User’s Manual Kabelbinder V erkabelung vom System 4 xi innerhalb eines Gestells Wenn Sie Kabel innerhalb eines Gestells von einem Gerä t zum anderen verlegen, sollen diese Kabel nicht vom System 4 xi gehalten werden.
Appendix B • Reference Extron • System 4 xi Switcher Series • User’s Manual Upgrading Main Controller Board Software and Battery Replacement ________ This procedure requires removing both AC power as well as the battery backup. If your System 4 xi software is version 1.
Extron's W arranty Extron Electronics warrants the product against defects in materials for a period of two years and defect in workmanship for a period of two years from the date of purchase.
EXTRON ELECTRONICS, EUROPE Beeldschermweg 6C, 3821 AH Amersfoort +31-33-453-4040 FAX +31-33-453-4050 The Netherlands EXTRON ELECTRONICS, ASIA 41B Kreta Ayer Road, Singapore 089003 +65-226-0015 FAX +65-226-0019 Singapore EXTRON ELECTRONICS / RGB SYSTEMS, INC.
デバイスExtron electronic 4LDXIの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Extron electronic 4LDXIをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはExtron electronic 4LDXIの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Extron electronic 4LDXIの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Extron electronic 4LDXIで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Extron electronic 4LDXIを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はExtron electronic 4LDXIの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Extron electronic 4LDXIに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちExtron electronic 4LDXIデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。