Extron electronicメーカーExtender Seriesの使用説明書/サービス説明書
ページ先へ移動 of 56
User ’s Manual VGA –UXGA Line Drivers With Audio 68-552-01 Rev . J 06 08 Extender Series.
Pr ecautions This symbol is intended to alert the user of important opera ting and mainten ance (se rvicing ) instru ctions i n the literature provided with the equipment. This symbol is intended to alert the user of the presence of uninsulated dangerous voltage within the product’s enclosure that may present a risk of electric shock.
安全须知 • 中文 这个符号提示用户该设备用户手册中 有重要的操作和维护说明。 这个符号警告用户该设备机壳内有暴 露的危险电压,有触电危险。 .
.
Extender Series • Quick Start Guide QS-1 Quick Start Guide — Extender Series SmMan_main_template_V4_051605 W Installation and service must be performed by authorized personnel only . These products must be used with UL approved, gr ounded electrical boxes.
Extender Series • Quick Start Guide Quick Start Guide — Extender Series, cont’d QS-2 Maximum Max. peaking and gain Medium – Mid-l ev el peaking and gain Normal Unity gain Maximum Max. peaking and gain Medium – Mid-le ve l peaking and gain Normal Unity gain Circuit board Fa ceplate Maxi mu m – Max .
TOC-i Extender Series • T able of Contents PRELIMINAR Y T able of Contents Chapter One • Introduction ................................................... 1-1 About this Manual .................................................................... 1-2 About the Extender Series VGA Line Drivers .
TOC-ii Extender Series • T able of Contents T able of Contents, cont’d PRELIMINAR Y 68-552-01 Rev . J 06 08 All trademarks mentioned in this manual are the properties of their respective owners. Extender AKM UK dimensions .........................
Extender Series 1 Chapter One Intr oduction About this Manual About the Extender Series VGA Line Drivers.
Extender Series • Introduction Intr oduction PRELIMINAR Y 1-2 About this Manual This manual contains information about the Extron Extender series line drivers, and on how to operate and congure them. “Extender” or “line driver” are used to r efer to all models interchangeably when instructions apply to mor e than one model.
Extender Series • Introduction PRELIMINAR Y 1-3 Features V ideo signal boosting — The selectable gain/peaking settings boost video signals to compensate for signal degradation caused by long cables. The Extender can send a high resolution signal up to 250 feet (76.
Extender Series • Introduction Introduction, cont’d 1-4 PRELIMINAR Y.
Extender Series 2 Chapter T wo Installation UL Requirements Installation Instructions Preparing the Site and Installing the Wall Box Front Panel Features and Cabling T op/Rear/Bottom panel Features an.
Extender Series • Installation Installation PRELIMINAR Y 2-2 C Installation and service must be performed by authorized personnel only . This product should be used with a UL appr oved electrical box. See “UL Requir ements”, below . UL Requirements 1.
Extender Series • Installation PRELIMINAR Y 2-3 • The Extender AAP EX can also be installed into an HSA 400 Series or HSA 800 Series surface access enclosure. • The Extender WM can be installed in a standar d or compact one-gang electrical wall box.
Extender Series • Installation Installation, cont’d 2-4 PRELIMINAR Y Connecting Shields.eps Metal Wall Bo x Screw Braided Shield Install Cable Foil Shield Cable Clamp Grounding outer braided and foil shields W T o prevent short cir cuits, the outer foil shield can be cut back to the point where the cable exits the cable clamp.
Extender Series • Installation 2-5 PRELIMINAR Y If attaching the wall box to wood, use four #8 or #10 screws or 10-penny nails. A minimum of ½ inch (1.3 cm) of screw thr eads must penetrate the wood. If attaching the wall box to metal studs or furniture, use four #8 or #10 self-tapping sheet metal screws or machine bolts with matching nuts.
Extender Series • Installation Installation, cont’d 2-6 PRELIMINAR Y Front Panel Featur es and Cabling a Faceplate screws — These secure the faceplate to the rest of the line driver . Faceplate dimensions are pr ovided in appendix B of this manual.
Extender Series • Installation 2-7 PRELIMINAR Y EXTENDER COMPUTER IN AUDIO IN 1 1 EXTENDER AKM UK AAP AUDIO IN COMPUTER IN EXTENDER WM AAP AU DIO IN EXTENDER WM COMPUTER IN AUDIO IN COMPUTER IN COMPUTER IN AU DIO IN 2 3 4 2 3 1 1 4 5 1 1 2 3 4 c Audio input connector — Plug a 3.
Extender Series • Installation Installation, cont’d 2-8 PRELIMINAR Y Other adapter plates must be order ed separately . They also must be attached to the faceplate and cabled before the line driver is installed in the wall or furniture.
Extender Series • Installation 2-9 PRELIMINAR Y T op/Rear/Bottom panel Features and Cabling 3 1 1 3 4 3 4 1 2 2 Extender MK, Extender AAP , Extender AAP EX, Extender WM A US, Extender AKM UK AAP , a.
Extender Series • Installation Installation, cont’d 2-10 PRELIMINAR Y a Audio output connector — Insert wires into and tighten the screws on this 3.5 mm, 5-pole dir ect insertion captive screw connector for unbalanced or balanced audio output. W ire the connector as shown in the following illustrations.
Extender Series • Installation 2-11 PRELIMINAR Y Slee ve (s) Left Tip Right Tip Left Ring Right Ring 9-18 VD C Po wer Au dio Unbalanced Output Left Tip NO Ground Here Slee ve (s) Right Tip NO Ground.
Extender Series • Installation Installation, cont’d 2-12 PRELIMINAR Y d Gain switch — 4 Maxi mu m Max. peaking and gain Medium – Mid-le ve l peaking and gain Normal Unity gain Extender MK, Ext.
Extender Series • Installation 2-13 PRELIMINAR Y T o compensate for cable resistance and capacitance, use a small screwdriver to slide this switch to select the level of video gain that yields the sharpest, smear-fr ee picture.
Extender Series • Installation Installation, cont’d 2-14 PRELIMINAR Y Mounting the Extenders Mounting the Extender AAP or Extender AAP EX into an AAP wall plate or device faceplate The Extender AA.
Extender Series • Installation 2-15 PRELIMINAR Y RGB - 20” HV - 18” Connects to AAP Cable F ront Panel Extron HSA 822 Tw o Screws Each Side #4-40 Nut w/ Captive Wa sher HSA 822 Cable Extron Extender AAP EX COM PUTER IN AUD IO IN Mounting the Extender AAP EX to an HSA faceplate 4 .
Extender Series • Installation Installation, cont’d 2-16 PRELIMINAR Y Pre-installation testing/tr oubleshooting Before mounting the line driver , test the system to make sure that the connections and settings are corr ect. 1 . Apply power to the line driver .
Extender Series • Installation 2-17 PRELIMINAR Y Mounting the Extender WM, Extender WM AAP , or Extender WM AUS to the wall box 1 . Remove power from the line driver by disconnecting the power supply . 2 . Place the line driver through the opening in the wall or furniture and into the wall box.
Extender Series • Installation Installation, cont’d 2-18 PRELIMINAR Y Mounting the Extender D 1 . Remove power from the line driver by disconnecting the power supply . 2 . Place the Extender D through the opening in the wall or furniture and into the wall box.
Extender Series • Installation 2-19 PRELIMINAR Y Mounting the Extender MK to the knockout box 1 . Remove power from the line driver by disconnecting the power supply . 2 . Place the line driver through the opening in the wall or furniture and into the knockout box.
Extender Series • Installation Installation, cont’d 2-20 PRELIMINAR Y Application Diagrams Exterder WM.eps Mini HR Cable Wa ll Stud EXTENDER W M COMPUTER IN AUDIO IN Projector Laptop w/ Audio Extender WM Audio IN PU T MON ITOR H.
Extender Series A Appendix A Specifications, Part Numbers, and Accessories Specifications Ordering Information Accessories.
Specifications, Part Numbers, and Accessories Extender Series • Specications, Part Numbers, Accessories PRELIMINAR Y A-2 Specifications Video Gain ................................................. 0 dB, 0.6 dB, 1.2 dB, selectable (when input is 0.
Extender Series • Specications, Part Numbers, Accessories PRELIMINAR Y A-3 Sync Input type ....................................... RGBHV , RGBS, RGsB, RsGsBs, bi-level and tri-level component video sync Output type ...............................
Extender Series • Specications, Part Numbers, Accessories Specifications, Part Numbers, Accessories, cont’d PRELIMINAR Y A-4 Nominal level ................................ -2 dBu, balanced; -10 dBV unbalanced Maximum level (Hi-Z) .............
Extender Series • Specications, Part Numbers, Accessories PRELIMINAR Y A-5 Extender WM Faceplate ..................... 4.5" H x 2.8" W x 0.1" D (1 1.4 cm H x 7.1 cm W x 0.3 cm D) (1 gang) Buffer ........................... 2.7" H x 1.
Extender Series • Specications, Part Numbers, Accessories Specifications, Part Numbers, Accessories, cont’d PRELIMINAR Y A-6 Extender D Faceplate ..................... 2.6" H* x 1.3" W x 0.1" D (6.6 cm H* x 3.3 cm W x 0.3 cm D) (Fits the opening in a 1 gang Decora faceplate.
Extender Series • Specications, Part Numbers, Accessories PRELIMINAR Y A-7 Ordering Information This section lists part numbers for each Extender and Extender kit.
Extender Series • Specications, Part Numbers, Accessories Specifications, Part Numbers, Accessories, cont’d PRELIMINAR Y A-8 Mud rings/mounting brackets Part numbers MR 100 – 1-gang modular .
Extender Series B Appendix B Dimensions and T emplates Dimensions T emplates.
Dimensions and T emplates Extender Series • Dimensions and T emplates PRELIMINAR Y B-2 Dimensions N The drawings in this section are not full size. Do not scale . N All dimensions are given in inches. Extender AAP and Extender AAP EX dimensions 0.583 0.
Extender Series • Dimensions and T emplates PRELIMINAR Y B-3 Extender WM dimensions EXTENDER WM 4.500 3.890 0.610 1.107 1.550 2.010 2.570 3.392 COMPUTER IN AU D IO IN 0.000 0.000 2.790 1.395 ø 0.156 TH RU WITH ø 0.290 X 82° C'SIN K (2 PLACES) ø 0.
Extender Series • Dimensions and T emplates Dimensions and T emplates, co nt’ d PRELIMINAR Y B-4 Extender WM AAP dimensions EXTENDER WM AAP 4.500 3.890 0.610 1.107 1.550 1.930 2.490 2.950 3.393 COMPUTER IN AU D IO IN 0.000 0.000 ” 1.200” 0.845” 1.
Extender Series • Dimensions and T emplates PRELIMINAR Y B-5 Extender WM AUS dimensions EXTENDER WM A U S COMPUTER IN AU DIO IN 0.000 0.671 1.157 1.434 1.840 2.228 3.493 3.979 4.650 0.000 ” 3.000” 2X Ø 0.125” THRU Ø 0.220” X 100° Ø 0.250” THRU Ø 0.
Extender Series • Dimensions and T emplates Dimensions and T emplates, co nt’ d PRELIMINAR Y B-6 Extender MK dimensions EXTENDER MK 5.700 5.224 0.474 1.681 1.460 1.958 2.365 3.244 4.017 4.240 COMPUTER IN 0.000 0.000 3.380 1.690 ø 0.156” TH RU WITH ø 0.
Extender Series • Dimensions and T emplates PRELIMINAR Y B-7 Extender AKM UK dimensions B B 7.156” 4X 1.500” 3.000” Ø 0.174” THR U 2X Ø.125” THR U w Ø.272” x 100° MARKED B 0.590” (7.156) 4X R 0.060” 3X 3.768” 3X 6.768” 6X Ø 0.
Extender Series • Dimensions and T emplates Dimensions and T emplates, co nt’ d PRELIMINAR Y B-8 Extender AKM MAAP dimensions A A 4X R 0.125” 2X R 2X R 0.062 2X 2.350 2X 0.650 1.975 1.750 1.250 1.025 2X 0.06 ” X 45° 2X 2.250” 3.000 +0.000 -0.
Extender Series • Dimensions and T emplates PRELIMINAR Y B-9 Extender D dimensions 2.610” 2.005” 1.545” 0.984” 0.000” Ø 0.132” THR U Ø 0.258” THR U 2X EXTR USION FOR #6-32 SCREW T APPING 0.111” 0.359 0.905” (0.223”) 2X 0.125” 0.
Extender Series • Dimensions and T emplates Dimensions and T emplates, co nt’ d PRELIMINAR Y B-10 T emplates N Always check and use the dimensions given in this appendix. Extender WM template 4.50" (11.43 cm) FULL SIZE Cut-out Line for Installing the Electrical Bo x T op P anel 2.
Extender Series • Dimensions and T emplates PRELIMINAR Y B-11 Extender WM AAP template 6.4" (16.3 cm) FULL SIZE T op P anel 4.5" (11.43 cm) Location of Extender AAP Circuit Board Extender WM AAP Cut-out T emplate f or the Extron SURF AC E CUT -OUT AREA FOR MOUNTING Cut-out line for installing the electrical bo x.
Extender Series • Dimensions and T emplates Dimensions and T emplates, co nt’ d PRELIMINAR Y B-12 Extender MK template 5.70" (14.48 cm) FULL SIZE To install an Extender MK directly into furniture , cut along this line. To p P anel 3.38" (8.
Extender Series • Dimensions and T emplates PRELIMINAR Y B-13 Extender WM AUS template 4.65" (11.81 cm) FULL SIZE To install the Extender WM AU S directly into furniture, cut along this line.
Extender Series • Dimensions and T emplates Dimensions and T emplates, co nt’ d PRELIMINAR Y B-14.
Extron’ s W arranty Extron Electr onics warrants this product against defects in materials and workmanship for a period of three years fr om the date of purchase.
© 2008 Extron Electronics. All rights reserved. Extron Electronics, USA 1230 South Lewis Street Anaheim , CA 92805 800.633.9876 714.491.1500 FAX 714.491.1517 Extron Electronics, Europe Beeldschermweg 6C 3821 AH Amersfoort, The Netherlands +800.3987.6673 +31.
デバイスExtron electronic Extender Seriesの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Extron electronic Extender Seriesをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはExtron electronic Extender Seriesの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Extron electronic Extender Seriesの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Extron electronic Extender Seriesで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Extron electronic Extender Seriesを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はExtron electronic Extender Seriesの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Extron electronic Extender Seriesに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちExtron electronic Extender Seriesデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。