Allied TelesisメーカーCG-WLBARGOの使用説明書/サービス説明書
ページ先へ移動 of 52
U ser Manual 5 4 M W i r e l e s s b r o a d b a n d R o u t e r CG-WLBARGO.
WLBARGO Manual PB 1 1. Product Intr oduc tion ...................................................................................................3 1.1 P ackage Contents ..................................................................................
WLBARGO Manual 2 3 2 3 2 3 <W AN setting (world wide w eb)>.....................................................30 <W AN setting/ D ynamic DNS> ......................................................... 32 <W AN setting/O ther setting> .
2 3 2 3 WLBARGO Manual 2 3 Corega WLBARGO is a 54M wireless broadband Router with IEEE802.11g wireless access point standard . It supp orts TX-burst technology which can effectively improve the tr ansmit speed. It also contains 5 dBi detachable antenna which can maximum transmit length up to 500m.
WLBARGO Manual 4 5 4 5 4 5 1.3 Hardware In troduc tion 1 3 4 5 7 6 2 8 9 11 10 1. Reset Button Press this butt on it will reset to default setting 2. WLAN LED (Green) ON:Connected 3. Power LED (Green) Indicate power sta tus 4.Status LED (Orange) Steady on: Abnormal Blink:Connected Flash:F irmware upgrade/Reboot 5.
4 5 4 5 WLBARGO Manual 4 5 2.1 Hardware Installa tion F ollowing the steps below to set up WLBARGO and the connection. (1) Insert the cable connec tor into the Netw ork Adapter embeded in PC, and insert the other side into one of LAN por ts (1~4) of the Router .
WLBARGO Manual 6 7 6 7 6 7 3.1 TCP/IP C onfiguration The following st eps and screenshots maybe dissimilar in diff erent operat- ing systems. This manual takes Windows XP/2000, 95/98/ME, and M ac O/S as examples: 3.1.1 Window s XP O/S (1) Enter [Contr ol Panel] -> click [Network Connection] -> right click and select [Open].
6 7 6 7 WLBARGO Manual 6 7 (3) Click [General] -> click [Internet Pr otocol ( TCP/IP), and click [Properties]. (4) Click [General], selec t [Obtain an IP Address A utomatically], and [Obtain DNS Ser ver address aut omatically], and press [Advance].
WLBARGO Manual 8 9 8 9 (5) Click [DNS] tab , unselect [Register this connec tion ’ s address in DNS], and press [OK]. (6) Go back to [Internet Pr otocol TCP/IP] and press [OK].
8 9 WLBARGO Manual 8 9 (2) Right click [Local Area C onnection], and select [Properties] * Note: Please check if TCP/IP had been installed in the [Local Ar ea Connection].
WLBARGO Manual 10 11 10 11 (4) Select [Obtain an IP address automatically], and [Obtain DNS server address automatically]. And click [Advance]. (5) Click [DNS] tab in [Adv ance TCP/IP setting] page , and unselect [Register this connection’ s DNS address, and press [OK].
10 11 WLBARGO Manual 10 11 3.1.3 Window s 98/95/ME O/S The configurations in all Windows 98/95/ME are the same , and this manual takes Windows 98 as an example. (1) Enter [Con trol P anel], and double click [Network]. (2) Click [Configuration] tab , and selec t [ T CP/IP], click [Properties].
WLBARGO Manual 12 13 12 13 (4) Click [Gateway] tab , remove all the gatewa ys, and press [OK] to close the window . (5) Go to [Network] and press [OK] to close the page. (6) The [Restar t the windows] screen will pop-up , press [OK] to restart the PC.
12 13 WLBARGO Manual 12 13 3.2 Brow ser Configur ation 3.2.1 Window s O/S The following e xamples are for Windows XP O/S, skip this chapter if you are using Windows 2000/98/ME. (1) Open Internet Explorer (IE 6.0), selec t [ T ools] menu and click [Internet Options].
WLBARGO Manual 14 15 14 15 14 15 (3) Unselect all three options in the [Local Area Network LAN Setting]. (4) Press [OK] in the [Int er net Options]. 3.2.2 Mac O/S (1) Open Internet Explorer (IE 5.0) Go to [Edit] in the menu bar , select [Internet Explorer Pr eferences].
14 15 14 15 WLBARGO Manual 14 15 4.1 Quick Network C onfiguration Basic configuration is required bef ore connection your computer to the inter- net via WLBARGO. The c onnec tion methods may be differ ed by your contr act to the ISP . Please reconfirm your c onnection conditions with your ISP prior to configure this router .
WLBARGO Manual 16 17 16 17 (5) Click [Quick Installation Setting]. (6) When seeing this screen shot, click on [Next]. (7) Select your connection type. Please make sure that your ADSL connection type is correct as you enter; the correct information can be obtained from the documents given by y our ISP .
16 17 WLBARGO Manual 16 17 (1) If you are subscribing to auto obtain IP service ( or DHCP Dynamic IP) from your ISP , such as Cable Modem that obtain an IP automatically for connection, please select [Auto obtain IP(DHCP)]. Click on [Next]. (2) Press [MA C address clone] to obtain the Ethernet card’ s MAC address .
WLBARGO Manual 18 19 18 19 (4) Within seconds, the result of the connection test will be appeared in the dialogue box to indicate the c onnec tion status. W hen [Connection ok] appears, click on [Close]. (5) Open the web browser (IE 6.0), and test with any websit e for testing the connection.
18 19 WLBARGO Manual 18 19 (1) If you are subscribing F ixed IP connection from your ISP , then selec t [F ixed IP], and click on [Nex t]. (2) Enter the network setting provided b y your ISP .
WLBARGO Manual 20 21 20 21 (3) Click on [Save] t o per form connection tests. (4) Within seconds, the result of the connection test will be appeared in the dialogue box to indicate the c onnec tion status. W hen [Connection OK] appears, click on [Close].
20 21 WLBARGO Manual 20 21 (5) Open the web browser (IE 6.0), and test with any websit e for testing the connection. *Note: If the connection to the website fails. Please make sure the data you entered are correct , or any mistake occured in the process of the installation, such as the LAN/W AN connections.
WLBARGO Manual 22 23 22 23 (3) Click on [Save] t o per form connection tests. (4) Within seconds, the result of the connection test will be appeared in the dialogue box to indicate the c onnec tion status. W hen [Connection OK] appears, click on [Close].
22 23 WLBARGO Manual 22 23 (5) Open the web browser (IE 6.0), and test with any websit e for testing the connection. *Note: If the connection to the website fails. Please make sure the data you entered are correct , or any mistake occured in the process of the installation, such as the LAN/W AN connections.
WLBARGO Manual 24 25 24 25 (2) Go [Control P anel] -> [Network connection] again ->R ight click [ Wireless network connection] ,select [Av ailable wireless network connection], choose one available netw ork e.g. ) corega , and click [Connect]. (3) Connection status will appear in the bottom right of the screen.
24 25 WLBARGO Manual 24 25 (2) Go [Control P anel] -> [Network connection] again -> right click [ Wireless network connection] , select [Av ailable wireless network connection], e.g. ) corega , and click [Connect]. (3) Connection status will appear in the bottom right of the screen.
WLBARGO Manual 26 27 26 27 26 27 T o prevent fr om unlawful access to your network, you are recommended to per form wireless security setting . T ype [192.168.1.1] in the browser’ s address bar , press [Enter]. Enter the function menu, ad click on [802.
26 27 26 27 WLBARGO Manual 26 27 5.2 WP A S etting WP A is encr ypted by a periodic updat e, making it more difficult to be hacked. Home users and company users are r ecommended to use <WP A-PSK> and <WP A-EAP> respectively .
WLBARGO Manual 28 29 28 29 28 29 <WP A-EAP> (1) S elect [ WP A2-EAP] or [ WP A/WP A2-EAP](Recommended). in the column of [Authentication] a. [ WP A2-EAP]: The 2nd generation encryption sk ill per forms stricter protec- tion than before . B efor e selection, please check the function availability of your network adapter , or select b.
28 29 28 29 WLBARGO Manual 28 29 The chapter will briefly introduce all functions of this product, and spell them out. Log in the management program and the below interface will appear . 6.1 Fea tures <Mode> Mode Select and switch to Router(wireless broadband router) or AP(Ac ess point) mode.
WLBARGO Manual 30 31 30 31 <W AN setting ( W orld Wide W eb )> The internet setting can be configured , according to your in ternet connection type, [ W AN Speed] - default setting is recommended . A. For [PPP oE]: Username Please enter username , given by y our ISP .
30 31 WLBARGO Manual 30 31 B.F or auto obtain IP (DHCP) : T ype Press [MA C address clone] to obtain the Ethernet card's MAC address . Computer name Please refer to your ISP int er net service information, add/edit [Computer name]. MTU value Maxi mum T rans missio n Unit .
WLBARGO Manual 32 33 32 33 C. For fix ed IP W AN IP address Please refer t o your ISP internet service information. Subnet mask Default gateway MTU Maxi mum T rans missio n Unit .
32 33 WLBARGO Manual 32 33 (1) select enable dynamic DNS ser vices. (2) Select one DDNS Provider . (3) enter login name. (4) enter login password . (5) Domain name. (6) Click [Save]. *Note: Corega does not provide DDNS service. Please register on one DDNS provider web sit e before you setup this function.
WLBARGO Manual 34 35 34 35 <LAN setting /DHCP server> (1) Select [Enable] to enable DHCP ser ver function. Default is [enable]. (2) Enter DHCP servers star t IP and end IP .
34 35 WLBARGO Manual 34 35 <Wireless setting/802.11g/b setting> ESSID ESSID is a name that makes wireless adapter identify this Router . T he default ESSID is [corega]. Mode • 802.11b/g: auto connect in either 802.11b or 802.11g. • 802.11g: connec t in 802.
WLBARGO Manual 36 37 36 37 <Wireless setting/802.11g/b security setting> This section contains WEP ,W AP-PSK, WP A2-PSK, WP A-EAP and WP A2-EAP encryption setting, please refer to Chapter 5 to get detail information.
36 37 WLBARGO Manual 36 37 <Security setting> Configuring firewall and no response t o W AN Ping requests. <Security setting/Connection control> This function can limit or control some certain networking ser vices: (1) Enter the range of limited IP address.
WLBARGO Manual 38 39 38 39 <Security setting/filter list> This function can forbid users to access certain website on the Internet: (1)Enter the forbidden URL or keywords (2) Then click [save] to complet e the configuration. All the forbidden data will be displayed in the table below .
38 39 WLBARGO Manual 38 39 <Adv anced setting/DMZ> If the online game’ s por t range is unknown, or its parameter is different every login, DMZ func tion is recommended . While this function starts, selec t the PC, being allowed to connect with, then click [Save].
WLBARGO Manual 40 41 40 41 <Advanc ed setting/Routing T able/Routing T able> All routing logs are display ed in the table. <Advanc ed setting/UPnP > Activating this function can detect the device or software of LAN, supporting UPnP . For example: online games suppor ting UPnP or Windows Messenger ( Ver .
40 41 WLBARGO Manual 40 41 <Management> Admin login name User name for login this management progr am. Default setting is [root] . Admin login password D efault password is empty . Passw ord comfirmation Please retype password . Connection Timeout Enter connection time-out time.
WLBARGO Manual 42 43 42 43 * Time Setup Select one of the time setup models. If user is in [Day light saving] r egion, please select [enable]. * Firmw are update (1) Click [Browse] to open the data f older . Follow the route tha t the firmware saves t o select the file.
42 43 WLBARGO Manual 42 43 The activation processes ar e as follows: (1) S elect [Enable]. (2) Indic ate 1 ~ 9600 f or parameters of por t range. e.g . ) 8080 (Recommended keeping default values). (3) Click on [S av e] af ter completing settings. e.g .
WLBARGO Manual 44 45 44 45 44 45 44 45 44 45 <Status/Log Displa y/system log> System log is displa yed in the table. <Status/Log Displa y/E-mail func tion> An E-mail address can be set below . Special incidents will be recorded and sent to the appointed E-mail address .
44 45 44 45 44 45 WLBARGO Manual 44 45 44 45 When the installation fails or the connection doesn ’t succeed, it ’ s recommend- ed to take the following actions. (1) Find y our problem in the troubleshooting collection. (2) Search on our official website at http://www .
WLBARGO Manual 46 47 46 47 Configuration t o check your setting]. (8) Has all information provided b y your ISP been entered correctly? (9) Are the settings of your w eb browser correct? Q2. Can not access the management program A: Please confirm the following settings.
46 47 WLBARGO Manual 46 47 <Window s XP/ 2000> (1) Click [Start] => [Programs] => [Command pr ompt]. (2) Input [ipconfig] => [Enter]. (3) Confirm IP address (which sould be 192.168.1.x). If the IP is incorrect, please enter 1-byte char acter as [ipconfig /renew] => Press [En ter].
WLBARGO Manual 48 49 PB 48 48 49 48 49 PB 48 Compliance Stand- ard WLAN:IEEE802.11, IEEE802.11b , IEEE802.11g LAN:IEEE802.3, IEEE802.3u, IEEE802.3x Interface W AN:10/100Mbps x 1 Port (RJ-45, Auto MDI/MDI-X) LAN:10/100Mbps x 4 Ports (RJ-45, Auto MDI/MDI-X) T ransmission speed IEEE802.
WLBARGO Manual F ederal C ommunic ation C ommission Inter ferenc e Statement This equipment has been tested and f ound to comply with the limits for a Class B digital device, pursuant to P ar t 15 of the FCC Rules. These limits are designed to provide reasonable prot ec tion against harmful interference in a residential instal- lation.
WLBARGO Manual corega 可瑞加科技於 1996 年成立於日本新橫濱，致力於提供多元化的家用 網路產品：包括乙太網路交換器、無線區域網路系列產品、路由器、.
www .corega.com.tw PN : T30-UM8410-00 Rev .A www .corega-asia.com 7F ., No. 10, Lane 345, Y angGuang St. Nei-Hu Chiu, T aipei Cit y 114, T aiwan TE L: +8 86 -2 -8 751 -9 16 4 F AX : +88 6- 2- 87 51- 91 74 corega T aiwan Inc.
デバイスAllied Telesis CG-WLBARGOの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Allied Telesis CG-WLBARGOをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはAllied Telesis CG-WLBARGOの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Allied Telesis CG-WLBARGOの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Allied Telesis CG-WLBARGOで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Allied Telesis CG-WLBARGOを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はAllied Telesis CG-WLBARGOの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Allied Telesis CG-WLBARGOに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちAllied Telesis CG-WLBARGOデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
