FergusonメーカーM 3673 GCの使用説明書/サービス説明書
ページ先へ移動 of 21
M 3673 GC - M 3673 GCT COLOUR TELEVISION 20761990 8/10/1997 11:29 Page 2.
- 2 - + + MAINS CONNECTION AND REMOTE BA TTERIES MAINS CONNECTION The TV is suitable for use on a.c. mains supply , 220-240V , 50 Hz only . It must not be connected to d.
- 3 - II MENU VT TV FUNC. VT STOP F 3003 123 456 789 0 / AV PROG. THE REMOTE CONTROL The menus Program., Organis. and TIMER can be locked. If you cannot display them, see page 18 on how to unlock them. The first line of the menus is automatically selected.
TO TURN ON Press the on/off switch; the indicator light comes on. Press button 1 on the remote control. If your television set has not been tuned in, you may now begin tuning the channels. Proceed to selecting the menu language in the INST ALLA TION MENU page 6.
- 5 - This set is equipped with an automatic search system which will sear ch and store all channels available in your region. T o help identify the programmes, we suggest that you have to hand a TV guide or daily newspaper .
Start the automatic sear ch again and reorganise the programmes. T o do this, call up the INST ALLA TION menu and proceed as described earlier (page 6).
- 7 - Press briefly to call up the main menu. Press repeatedly until the Organis. line is selected. Press briefly and the PROGRAMME ORGANIZER menu is displayed. While the television is in any A V mode, (audio-visual), PROGRAMME ORGANIZER menu cannot be displayed.
- 8 - Press briefly to call up the main menu. The PREF . line is selected Press briefly and the picture menu appears. The first line is selected. Press the button repeatedly to select the function you want to adjust : PICTURE ADJUSTMENTS Select the line.
- 9 - - 9 - Pressing once turns the sound of f. The sound returns if the button is pressed once more. Set the volume as desired. Switch on the television set with the mains on/off switch if the indicator is of f. If it is on, select the desired programme : For the programmes from 1 to 9 : Press briefly the corresponding number .
- 10 - ST AND-BY (SLEEP TIMER) OTHER FUNCTIONS Press briefly . The menu shown on the right is displayed. The line is selected. Stand-By times of between 15 minutes and 4 hours can be set (in 15-minute steps). Press repeatedly to adjust the hours (max.
- 11 - This cannot be used if the clock is not set. Y ou can programme your television set to switch on automatically to a chosen programme at a chosen time. Firstly , make sure that the inter nal clock is set to the correct time. T o do so : Press briefly .
- 12 - Press briefly to display the PROGRAM. menu. The first line is selected. Select the line. Start the search by pressing : — : backward channel search. + : For ward channel search. The cursor will move and the channel numbers are displayed on the CH line when received via the aerial or on the CC line for cable network.
- 13 - Press briefly to move to the Name line. Press briefly . The first dash flashes. Hold down (PROG +) : the characters are displayed in ascending order . Hold down (PROG — ): the characters are displayed in descending order . When the character you are looking for is displayed, move on to the next ( + ), or preceding dash ( — ).
- 14 - Only the main transmitters are listed. There are in addition many relay stations, and full lists are available from the Broadcasting Authorities.
- 15 - In addition to the RTE main transmitters listed, there are many R TE transposers throughout the countr y . If your area is not covered by a main transmitter and you ar e not sure of the channel numbers of your local transmissions, your television dealer is the best person to advise you.
- 16 - TEXT Press the TEXT button to access teletext ser vices, then use the number buttons to directly select any teletext page. All pages are three-digit numbers.
- 17 - CONNECTIONS Enables connection of the aerial and, if required, a video-recorder , (see note for the latter). T o tune the channel reser ved for your video-recorder , you must inser t a cassette and start it playing. Next locate the corresponding channel on your television by carr ying out MANUAL CHANNEL SETTING (p.
- 18 - This menu is used for: - locking the Program., Organis. and TIMER menus, - limiting the volume. LOCKING MENU VOLUME LIMITING Press briefly to select the MAX line : ................................................ Set the maximum volume desired.
- 19 - This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured. Do read the Operating Instructions before you attempt to use the equipment.
- 20 - Video inputs Composite video or sync: Pin 20 (pin 17 return). RGB: Red–Pin 15 (pin 13 return). Green–Pin 11(pin 9 return). Blue–Pin 7 (pin 5 return). Video output Composite video: Pin 19 (pin 17 return). Audio inputs A–Pin 6 (pin 4 return).
Guarantee This guarantee is automatically eff ective from the date of purchase of the equipment.The appropriate sections should be completed by the dealer and purchaser at the time of purchase.
デバイスFerguson M 3673 GCの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Ferguson M 3673 GCをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはFerguson M 3673 GCの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Ferguson M 3673 GCの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Ferguson M 3673 GCで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Ferguson M 3673 GCを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はFerguson M 3673 GCの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Ferguson M 3673 GCに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちFerguson M 3673 GCデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。