FisherメーカーPLC-XU10Nの使用説明書/サービス説明書
ページ先へ移動 of 48
Owner's Man ual PLC-XU10N Multimedia Pr ojector MODEL.
2 INFORMA TION T O THE USER NO T E : This equipment has been tested and f ound to comply with the limits for a Class A digital de vice, pursuant to P ar t 15 of FCC Rules. These limits are designed to pro vide reasonable protection against har mful interf erence when the equipment is operated in a commercial environment.
3 IMPOR T ANT SAFETY INSTR UCTIONS All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning.
4 T ABLE OF CONTENTS FEA TURES AND DESIGN 5 BEFORE OPERA TION 16 COMPUTER MODE 25 VIDEO MODE 31 SETTING 40 APPENDIX 41 PREP ARA TION 6 NAME OF EACH PART OF THE PROJECTOR 6 SETTING UP THE PROJECTOR 7 C.
5 FEA TURES AND DESIGN This Multimedia Projector is designed with most advance technology for portability, durability, and ease for use. The projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology.
6 PREP ARA TION NAME OF EA CH P AR T OF THE PROJECT OR.
7 PREP ARA TION SETTING-UP THE PR OJECT OR P ositioning the Pr ojector ● This projector is basically designed to project on a flat projection surface. ● The projector can be focused from 4.6'(1.4m) ~ 35.4'(10.8m). ● Refer to the figure below to adjust the screen size.
8 PREP ARA TION ● Do not cover the vent slot. ● Keep the rear grill at least one meter away from any object. ● Make sure that there is no object under the projector. An obstacle under the projector may prevent the projector from taking the cooling air through the bottom vent slot.
9 PREP ARA TION Mo ving the Pr ojector Use the Carry Handle when moving the Projector. ● Replace the lens cover and rotate the feet fully clockwise (to shorten the feet) when moving the projector to prevent damage to the cabinet.
10 CONNECTING THE PR OJECT OR TERMINALS OF THE PR OJECT OR ¥ COMPUTER IN MONITOR OUT CONTROL PORT AUDIO IN MCI SERIAL AUDIO OUT (MONO) VIDEO R-AUDIO-L S-VIDEO Connect the computer output to this terminal. (Refer to P12 ~15.) When controlling the computer with the Remote Control of this projector, connect the mouse port to this terminal.
11 CONNECTING THE PR OJECT OR ¥ COMPUTER IN MONITOR OUT CONTROL PORT AUDIO IN MCI SERIAL AUDIO OUT (MONO) VIDEO R-AUDIO-L S-VIDEO CONNECTING T O THE VIDEO EQ UIPMENTS Satellite TV Turner Video Casset.
12 CONNECTING THE PR OJECT OR CONNECTING T O THE IBM-COMP A TIBLE COMPUTER To connect with the IBM-compatible computer, refer to the figure below. · VGA CABLE (supplied) · MOUSE CABLE FOR PS/2 PORT .
13 B A ¥ COMPUTER IN MONITOR OUT CONTROL PORT AUDIO IN MCI SERIAL AUDIO OUT (MONO) VIDEO R-AUDIO-L S-VIDEO CONNECTING THE PR OJECT OR To disconnect MOUSE CABLE, 1. Hold the portion (B) of the connector with one hand. 2. Pull the portion (A) to the arrow direction and remove connector.
14 CONNECTING THE PR OJECT OR ON 1 2 3 4 56 DIP CONNECTION T O THE MA CINT OSH COMPUTER To connect with the Macintosh computer, refer to the figure below.
ON 1 2 3 4 5 6 DI P B A ON OFF ¥ COMPUTER IN MONITOR OUT CONTROL PORT AUDIO IN MCI SERIAL AUDIO OUT VIDEO R-AUDIO-L S-VIDEO (MONO) 13" MODE (640 x 480) 16" MODE (832 x 624) 19" MODE (1.
PA G E MENU AU TO IM AG E MUTE VOLUME FOCUS ZO O M ON-OFF NORMAL CURSOR COMPUTER/ MCI VIDEO F R E E Z E / N O S H O W D . Z O O M LASER 16 BEFORE OPERA TION OPERA TION OF THE REMO TE CONTR OL COMPUTER / MCI BUTTON Used to select source either COMPUTER or MCI mode.
17 BEFORE OPERA TION Remote Contr ol Batteries Installation 1 2 3 Slide the lid upward. Press the lid downward and slide it. For correct polarity (+ and –), be sure the battery terminals are in contact with the pins in the compartment. Remove the battery compartment lid.
18 BEFORE OPERA TION T OP CONTR OLS AND INDICA T ORS LAMP REPLACE LAMP W ARNING TEMP . READ Y SELECT MENU MODE A UTO IMA GE P AGE ZOOM FOCUS V OLUME NORMAL ON–OFF + – Used to select zoom adjust. (Refer to P23.) Used to active or terminate the MENU operation.
19 BEFORE OPERA TION HO W T O OPERA TE ON-SCREEN MENU FLO W OF ON-SCREEN MENU Display ON-SCREEN MENU Press MENU button to display the ON-SCREEN MENU (MENU BAR). The red frame is the POINTER. Select the ITEM by pressing SELECT button. The dialog box of the ITEM appears.
20 BEFORE OPERA TION MENU B AR SYSTEM MENU Used to select a computer system. (Refer to P25) IMAGE MENU Used to adjust the computer image. [Fine sync. / Total dots / White Balance / Contrast / Brightness] (Refer to P28) PC ADJUST MENU Used to adjust the parameters to match with the input signal format.
21 BEFORE OPERA TION.
22 B ASIC OPERA TIONS T urning on the Pr ojector Connect the projector's AC power cord into a wall outlet. The LAMP POWER indicator lights RED, and the READY indicator lights GREEN. Press the power ON-OFF button on the Remote Control Unit or on the Top Control to ON.
23 B ASIC OPERA TION ADJUSTING THE IMA GE ZOOM Adjustment 1 Press ZOOM button on the Top Control or the Remote Control to turn into the ZOOM mode. 2 Adjust the size of the image by pressing POINT UP/DOWN button. Press UP button to have the image larger, and press DOWN button to have the smaller.
Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select SOUND and press the SELECT button. Another dialog box SOUND ADJUST Menu will appear. 24 B ASIC OPERA TION Sound Volume Adjustment Press the VOLUME (+/–) buttons (located on the Top Control or on the Remote Control Units) to adjust the volume.
Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select Computer and press the SELECT button. 25 COMPUTER MODE SELECTING COMPUTER MODE Direct Operation Press the MODE button on the Top Control or the COMPUTER / MCI button on Remote Control Unit.
26 COMPUTER MODE PC ADJUSTMENT This Projector can automatically detect display signals from most personal computers currently distributed. However, some computers employ special signal formats which are different from the standard ones and may not be detected by this projector.
27 COMPUTER MODE COMP A TIBLE COMPUTER SPECIFICA TIONS Basically this projector can accept the signal from all computers with the V, H-Frequency below mentioned and less than 160 MHz of Dot Clock. NOTE : Specifications are subject to change without notice.
28 COMPUTER MODE PICTURE IMA GE ADJUSTMENT Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select IMAGE and press the SELECT button. Another dialog box PICTURE IMAGE ADJUSTMENT Menu will appear. Press the POINT DOWN button and a red-arrow icon will appear.
29 COMPUTER MODE The Auto Image function is provided to automatically adjust Fine sync., Total dots, and Picture Position for most computers. Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select AUTO IMAGE and press the SELECT button.
30 COMPUTER MODE PICTURE POSITION ADJUSTMENT The position of the image can be adjusted vertically and horizontally through PICTURE POSITION ADJUSTMENT. Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select POSITION and press the SELECT button.
31 VIDEO MODE Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select Video and press the SELECT button. SELECTING VIDEO MODE Direct Operation Press the MODE button on the Top Control or the VIDEO button on the Remote Control Units.
32 VIDEO MODE PICTURE IMA GE ADJUSTMENT Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select IMAGE and press the SELECT button. Another dialog box PICTURE IMAGE ADJUSTMENT Menu will appear. Press the POINT DOWN button and a red-arrow icon will appear.
33 MCI MODE OPERA TING THE PC CARD SLO T This projector has PC CARD SLOT on its side. Pictures in a memory card (SmartMedia with PC Card Adapter or PC card) can be displayed just by inserting the card into PC CARD SLOT. It is unnecessary to connect with other input equipment.
34 MCI MODE SHO W THE D A T A IN THE MEMOR Y CARD Displa y Data on Screen ● This projector can project only the image data edited with Media Card Imager or the data in Bit Map type or in JPEG type through PC CARD SLOT. Other data is not available and should be edited and written in a memory card with Media Card Imager before loading PC CARD SLOT.
35 MCI MODE PICTURE IMA GE ADJUSTMENT Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select IMAGE and press the SELECT button. Another dialog box PICTURE IMAGE ADJUSTMENT Menu will appear. Press the POINT DOWN button and a red-arrow icon will appear.
36 MCI MODE PICTURE POSITION ADJUSTMENT The position of the image can be adjusted vertically and horizontally through PICTURE POSITION ADJUSTMENT. Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select POSITION and press the SELECT button.
37 MCI MODE WRITE D A T A INT O MEMOR Y CARD Access to the Car d with the Pr ojector If your computer doesn't have the PC card write equipment, the data can be written or read by connecting with this projector. NOTE : This operation can be made only by Media Card Imager in PC.
38 MCI MODE SMAR TMEDIA AND PC CARD AD APTER SmartMedia and PC Card Adapter are provided with this LCD projector. SmartMedia can be used as a PC card conforming to the PC Card Standard-ATA by combining with PC Card Adapter. Install / Remo ve the Smar tMedia INST ALL Insert SmartMedia fully into PC Card Adapter.
39 MCI MODE SmartMedia ● SmartMedia is a precision device. Do not bend it, drop it, subject it to strong forces or shocks or place where strong static electrical charge can be generated. ● Do not touch the surface of the Contact Area with fingers or allow it to be stained with foreign mate- rials.
40 SETTING SETTING MENU Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select SETTING and press the SELECT button. Another dialog box SETTING Menu will appear. Press the POINT DOWN button and a red-arrow icon will appear.
41 APPENDIX OPERA TING WIRELESS MOUSE Installation The Wireless Remote Control Unit is not only able to operate the projector but also usable as a wireless mouse for a PC. POINT buttons and two CLICK buttons are used for wireless mouse operation. Wireless mouse is usable when PC mouse pointer is displayed on the screen.
42 APPENDIX MAINTENANCE TEMPERA TURE W ARNING INDICA T OR The TEMPERATURE WARNING Indicator flashes red when the internal temperature of the projector exceeds the normal temperature. The Indicator stops to flash when the temperature of the projector become normal.
43 APPENDIX LAMP REPLA CEMENT Indicator When the Lamp of this projector draws to an end, the LAMP REPLACEMENT indicator lights yellow. When the image become dark or the color of the image become unnatural, replacement of the Lamp is required. Turn off the projector and disconnect the AC plug.
44 APPENDIX TR OUBLESHOO TING Before calling your dealer or service station for assistance, check the matters below once again. 1. Make sure you have connected the projector to your equipment a s described in section "CONNECTING THE PROJECTOR" on pages 10 ~ 15.
45 APPENDIX W ARNING : High v oltages are used to operate this projector . Do not attempt to open the cabinet. Sanyo Service is easily obtained. If after following all operating instructions, you find that service is necessary, contact the SFS Corporation in Los Angeles, or the store where you purchased the unit.
46 0.9" TFT Active Matrix type, 3 panels TECHNICAL SPECIFICA TIONS Multi-media Projector 9.48 lbs (4.3 kg) 8.46" x 4.88" x 12.85" (215mm x 124mm x 326.5mm) 1,024 x 768 dots 2,359,296 (1,024 x 768 x 3 panels) PAL, SECAM, NTSC, NTSC4.
This symbol on the nameplate means the product is Listed by Underwriters Laboratories Inc. It is designed and manufactured to meet rigid U.L. safety standards against risk of fire, casualty and electrical hazards.
1YEAR In order to obtain warranty service, the product must be delivered to and picked up from and Authorized Sanyo Factory Service Center at the user's expense, unless specifically stated otherwise in this warranty. the names and addresses of authorized Sanyo Service Centers may be obtained by calling the toll-free number listed below.
デバイスFisher PLC-XU10Nの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Fisher PLC-XU10Nをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはFisher PLC-XU10Nの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Fisher PLC-XU10Nの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Fisher PLC-XU10Nで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Fisher PLC-XU10Nを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はFisher PLC-XU10Nの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Fisher PLC-XU10Nに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちFisher PLC-XU10Nデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
