Fisher-Priceメーカー73528の使用説明書/サービス説明書
ページ先へ移動 of 12
1 Please keep this instruction sheet for future reference, as it contains important information. Adult assembly is required. Age: 1½ years - 5 years. Weight Limit: 50 lbs. (23 kg). Tools needed for assembly: Phillips Screwdriver, Hammer and Scrap Block of Wood (all not included).
2 W ARNING To avoid serious injury: • Adult supervision is required. • Never use near cars and other motor vehicles, near streets, steps, sloped driveways, hills, roadways, alleys, swimming pool areas or other bodies of water. • Always wear shoes or sneakers.
3 Parts Seat Pin Seat Handlebar Handle Pin Frame Cover Handle T op Handle Bottom Base 2 Base/Handle Covers Fork Front Wheel Assembly 2 Fork Covers 4 Pedal Axle Covers Straight Axle 2 Rear Wheels Cap N.
4 Assembly • Please save all packaging material until assembly is complete to ensure that no parts are discarded. • Please wipe each part with a clean, dry, cloth before assembling this product. This product contains small parts in its unassembled state.
5 Assembly • Fit the wheel cap into the center of the wheel. Tap the wheel cap with a hammer to secure it to the wheel. • Set the frame assembly aside. 4 Wheel Cap 3 • Turn the frame on its side with the exposed end of the straight axle up. • Place the assembled rear wheel on the scrap block of wood.
6 Assembly • Place the front wheel assembly between the fork arms so that the pedal axle fits into the groove at the bottom of each fork arm. • Place a fork cover over the pedal axle on one fork arm. • Insert two #10 x ¾ " screws into the fork cover and tighten.
7 • Insert the knobbed end of the foot- rest up through the opening in the underside, center of the frame . • Rotate the footrest ¼ turn . • Slide the footrest toward the handlebar as far as it will go until the top of the footrest is positioned over the opening’s rectangular cut-out.
8 Assembly • While pushing down on the seat, insert the seat pin through the hole in the seat and into a seat mount adjustment hole. 11 Seat Pin • Insert 13 - #8 x ¾ " screws into the handle top and tighten. 13 • Place the base/handle assembly on a flat surface so that the wheel retainers are upright.
9 Ride-on Rocker • Insert the base/handle pin through one wheel retainer, a hole in the front wheel and into the other wheel retainer. • Push the handle pin to “snap” it into place .
10 3 2 Base/Handle • Insert the handle pin through one side of the base/handle, through the holes in the back of the frame and out through the hole in the other side of the base/handle. Make sure the handle pin “snaps” into place. • Pull on the handle pin to be sure it is secure.
11 Pedal T rike 2 Base/Handle • Rotate the base/handle down, under the trike, to the ride-on rocker position. 1 Base/Handle • If you are converting from the learn to pedal trike mode, remove the handle pin from the base/handle and the back of the frame.
12 Storage Maintenance • Check plastic parts regularly and if broken or cracked, dispose of them properly. • Check all fasteners regularly to be sure they are tight. If the fasteners are not tight, tighten them as necessary. • To clean this product, use a mild soap and water solution and a clean cloth.
デバイスFisher-Price 73528の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Fisher-Price 73528をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはFisher-Price 73528の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Fisher-Price 73528の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Fisher-Price 73528で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Fisher-Price 73528を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はFisher-Price 73528の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Fisher-Price 73528に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちFisher-Price 73528デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
