AlpineメーカーCDA-7865Rの使用説明書/サービス説明書
ページ先へ移動 of 32
EN DE FR ES IT SE R ALPINE ELECTRONICS, INC. Tokyo office: 1-1-8 Nishi Gotanda, Shinagawa-ku, Tokyo 141-8501, Japan Tel.: (03) 3494-1101 ALPINE ELECTRONICS OF AMERICA, INC. 19145 Gramercy Place, Torrance, California 90501, U.S.A. Tel.: 1-800-ALPINE-1 (1-800-257-4631) ALPINE ELECTRONICS OF CANADA, INC.
Alpine CD Changers Give Y ou More! More musical selections, more versatility , more convenience. An Alpine CD Changer adds more musical choices to your sound system. All models can be controlled from Alpine head units and deliver excellent sound quality .
1 -EN Contents Operating Instructions W ARNING W ARNING .................................................. 2 CA UTION ................................................... 2 PRECA UTION ............................................ 2 Basic Operation Detaching the Front Panel .
2 -EN W ARNING This symbol means important instructions. Failure to heed them can result in serious injury or death. DO NOT OPERA TE ANY FUNCTION THA T T AKES YOUR A TTENTION A WA Y FROM SAFEL Y DRIVING YOUR VEHICLE. Any function that requires your prolonged attention should only be performed after coming to a complete stop.
3 -EN Never Attempt the Following Do not grip or pull out the disc while it is being pulled back into the player by the automatic reloading mechanism. Do not attempt to insert a disc into the unit when the unit power is off. Inserting Discs Y our player accepts only one disc at a time for playback.
4 -EN Detaching the Fr ont Panel 1 Press the PWR (Power) button at least 3 seconds to turn off the power . 2 Press the (Release) button at lower left corner until the front panel pops out.
5 -EN Mov able displa y The movable display may be adjusted to 3 different angles depending upon user preference. 1 Press the ANGLE 8 or 9 button to adjust the angle of the movable display . NO TES • The display will close a half minute after the ignition key is turned to the OFF position.
6 -EN MODE INTLZ TUNE DN g f UP Basic Operation Changing Bac klighting Colour 1 Press and hold the INTLZ button for at least 2 seconds. 2 Press the f UP button repeatedly to select "AMBER". Each press of the f UP button changes the modes as shown: NO TE If you pr ess the DN g button the display scr olls in r everse sequence.
7 -EN T urning Mute Mode On/Off If a device having the interrupt feature is connected, audio will be automatically muted whenever the interrupt signal is received from the device. This function can be turned ON or OFF from the head unit by following procedure below .
8 -EN Basic Operation MODE INTLZ/DISP SOURCE A.PROC TUNE DN g f UP Demonstration This unit has the Demonstration feature which simulates the display functions on the display panel. 1 Press and hold the INTLZ button for at least 2 seconds. 2 Press the f UP button to select the DEMO mode.
9 -EN 6. SUBW (Change the Subwoofer Phase): NOR ↔ REV Y ou can change the subwoofer phase. (Only available when using the subwoofer output from this unit.) 7. DEFP (Defeat On and Of f): ON ↔ OFF When DEFEA T is turned ON, all items 1 to 6 are set to default values.
10 -EN Preset buttons (1 thr ough 6) SOURCE BAND TUNE/A.ME f UP DN g Manual T uning 1 Press the SOURCE button until a radio frequency appears in the display .
11 -EN Manual Storing of Station Presets 1 Select the radio band and tune in a desired radio station you wish to store in the preset memory . 2 Press and hold any one of the Preset buttons (1 through 6) for at least 2 seconds until the station frequency on the display blinks.
12 -EN Setting RDS Reception Mode and Receiving RDS Stations The RDS (Radio Data System) is a radio information system using the 57 kHz subcarrier of regular FM broadcast.
13 -EN Receiving RDS Regional (Local) Stations 1 Press and hold the INTLZ button for at least 2 seconds to activate the setting mode. 2 Press the f UP button repeatedly to select "REG" Each press of the f UP button scrolls the modes as shown: NO TE If you pr ess the DN g button the display scr olls in r everse sequence.
14 -EN Receiving T raffic Inf ormation While Pla ying CD or Radio 1 Press the T .INFO button repeatedly until the T .INFO indicator appears in the display .
15 -EN 4 Press the P . PTY button to activate the PRIORITY PTY mode again. • T o change the programme category , perform the step 3. • T o disable the PRIORITY PTY function, press the P . PTY button. NO TE In the PRIORITY PTY function, unlike in the T .
16 -EN Opening and Closing the Mo v able displa y 1 Press the c button. The movable display will open. T o close the movable display , press the c button again. The movable display will close. NO TES • Do not apply shock to the movable display when it is open as it may r esult in malfunction of the unit.
17 -EN Music Sensor (Skip) 1 Momentarily press the DN g button once during CD play to return to the beginning of the current track. If you wish to access the beginning of a track further back, repeatedly press until you reach the desired track. Press the f UP button once to advance to the beginning of the next track.
18 -EN Displaying the Title/T ext It is possible to display the CD title if the title has been previously inputted. For details, see T itling Discs (see this page). T ext information, such as the disc name and the track name, will be displayed if playing a CD text compatible disc.
19 -EN 5 Repeat the steps 3 and 4 above to complete the titling. Pressing the MODE (Audio Control) button after entering the eighth character , automatically stores the title into memory .
20 -EN Searc hing for Titled Discs (CD Changer only) If a CD is titled, you can do a search for it. (T o title CDs, refer to "T itling Discs" on page 18.) 1 Press and hold the T .S.M. button for at least 2 seconds. The title blinks in the display .
21 -EN REMOTE CONTROL UNIT RUE - 4185 MUTE CD-CHG SOURCE A.PROC ENT BAND PROG PWR VOLUME 1 2 3 4 5 6 8 7 9 ! # " 8 g But ton Radio mode: SEEK (DN) Button CD mode: Press the button to go back to the beginning of the current track. 9 f But ton Radio mode: SEEK (UP) Button CD mode: Press the button to advance to the beginning of the next track.
22 -EN Battery Replacement Applicable battery: Use two "AAA" sized dry batteries or equivalent. 1 Opening the battery cover Slide out the battery cover while firmly pressing outward. 2 Replacing the battery Put the batteries in the case observing the polarities as illustrated.
23 -EN Information CD CD Play er/Changer not functioning. • Out of operating temperature range +50˚C (+120˚F) for CD. - Allow the vehicle's interior (or trunk) temperature to cool. CD playbac k sound is wa vering. • Moisture condensation in the CD Module.
24 -EN Indication for CD Changer • Protective circuit is activated due to high temperature. - The indicator will disappear when the temperature returns to within operation range. • Malfunction in the CD Changer . - Consult your Alpine dealer . Press the magazine eject button and pull out the magazine.
25 -EN GENERAL Power Requirement 14.4 V DC (1 1 – 16 V allowable) Maximum Power Output 60 W × 4 Output V oltage 4 V/10k ohms Bass ±14 dB at 60 Hz T reble ±14 dB at 10 kHz W eight 1.
26 -EN Installation and Connections Before installing or connecting the unit, please read the follo wing and pages 2 and 3 of this manual thor oughly f or proper use. W arning MAKE THE CORRECT CONNECTIONS. Failure to make the proper connections may result in fire or product damage.
27 -EN Installation Caution When you install this unit in your car , do not remove the Detachable Front Panel. If the Detachable Front Panel is removed during installation, you might press too hard and warp the metal plate that holds it in place. 1 Remove the Detachable Front Panel (refer to page 4).
28 -EN Connection Installation and Connections ISO Antenna Plug Antenna T o vehicle phone T o amplifier or equalizer T o power antenna Battery ISO Antenna Con vertor Plug T o the instrument cluster il.
29 -EN 1 Antenna Receptacle Connect to the supplied ISO antenna convertor plug. 2 Audio Interrupt In Lead (Pink/Black) Connect this lead to the Audio Interface output of a cellular phone which provides ground shorting when a call is received.
30 -EN.
デバイスAlpine CDA-7865Rの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Alpine CDA-7865Rをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはAlpine CDA-7865Rの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Alpine CDA-7865Rの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Alpine CDA-7865Rで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Alpine CDA-7865Rを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はAlpine CDA-7865Rの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Alpine CDA-7865Rに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちAlpine CDA-7865Rデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。