Fordメーカー2002 Crown Victoriaの使用説明書/サービス説明書
ページ先へ移動 of 16
Severe service conditions 2 Maintenance recommendations 3 Severe duty equipment 4 All rights reserved. Reproduction by any means, electronic or mechanical including photocopying, recording or by any information storage and retrieval system or translation in whole or part is not permitted without written authorization from Ford Motor Company .
This brochure is intended to aid the operators of police or fleet vehicles (used in severe duty , high mileage operations) in understanding the required maintenance services for such vehicles. It covers maintenance services for vehicles equipped with Heavy Duty packages.
Police and fleet vehicles are manufactured with heavy-duty parts that are designed specifically for the varying demands and unique requirements under which they are operated.
POWERTRAIN OVERSPEED PROTECTION The powertrain control module (PCM) includes logic to electronically prevent powertrain overspeed in any transmission selector position. TRANSMISSION The police vehicle has a unique high-performance powertrain including transmission and an aluminum driveshaft, which is designed for maximum vehicle performance.
COOLERS Extra oil cooler-Police It is strongly recommended that auxiliary devices such as lights not be installed at the grille. Such devices will reduce airflow through the grille and could potentially impact the cooling system performance.
alarms) that are equipped with radio transmitters. If you install this equipment in your vehicle, you should comply with those rules and a qualified technician should install the equipment. Ford Motor Company vehicles are in compliance with FCC regulations (CFR 47 Part 15) and SAE J551d for radiated electromagnetic emissions.
AIR BAGS Dual driver/passenger air bags affect the way police equipment can be mounted in police vehicles. Any surfaces that could come into contact with an air bag, once it has deployed, must not damage the air bag or alter its deployment path.
All air bag and equipment mounting zone dimensions are approximate due to different air bag deployment characteristics. Figure 1 1. 325 mm (12.5 inches) from center of air bag door 2. 375 mm (15 inches) from center of air bag door 3. 700 mm (27.5 inches) No objects should be placed between the air bags due to air bag variability .
Figure 2 1. 650 mm (25.5 inches). Cross section through center of vehicle (passenger side shown) 1 Severe duty equipment 9.
Figure 3 1. 580 mm (23 inches). Front passenger compartment 1 Severe duty equipment 10.
Figure 4 1. Area on top of instrument panel. Equipment must not interfere with driver visibility . 2. The air bag door must be kept clear for deployment of air bag 3. Area in front of center console from bottom of ashtray to top of instrument panel (see Figure 2 for dimensions) 4.
Figure 5 1. Area on top of instrument panel 2. Area in front of center console from tunnel up to instrument panel 3. Prisoner screen 4. 254 mm (10 inches) 5. Area on tunnel between seats 6. Height: 216 mm (8.5 inches) 7. 305 mm (12 inches) 8. Area on tunnel beneath center console 9.
Figure 6 1. Area on top of instrument panel. Equipment must not interfere with driver visibility . 2. Area on tunnel between seats 3. 229 mm (9 inches) 4.
IMPORT ANT AIR BAG DO’S AND DON’TS Do not attempt to tamper with, disconnect or deactivate the air bag system. T ampering with an air bag system could cause the bag to inflate or become inoperative. The air bag system should not be disconnected or deactivated.
deployment of air bags. W ithout the benefit of crash tests on vehicles equipped with push bumpers (there are a number of different styles available), it is Ford’ s opinion that installation of some push bumpers could affect the timing of the air bag deployment.
16.
デバイスFord 2002 Crown Victoriaの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Ford 2002 Crown Victoriaをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはFord 2002 Crown Victoriaの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Ford 2002 Crown Victoriaの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Ford 2002 Crown Victoriaで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Ford 2002 Crown Victoriaを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はFord 2002 Crown Victoriaの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Ford 2002 Crown Victoriaに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちFord 2002 Crown Victoriaデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。