Fordメーカー2002 Windstarの使用説明書/サービス説明書
ページ先へ移動 of 24
Quick Start — How to get going 2 Introduction 4 Description 8 Operating Instructions 17 Videocassette Player Display Messages 21 In-Home Use 23 All rights reserved.
QUICK START — HOW TO GET GOING T o operate the system: 1. Y our AutoVision t Video Entertainment System is automatically activated when the vehicle ignition and the audio system are ON. 2. If a movie is desired, insert a VHS cassette into the VCP and the video should start playing.
T o play a video game: 1. Connect the video line from your game device to the VIDEO jack. 2. Connect the left and right audio cables to the left (L) and right (R) audio jacks. 3. Ensure that the system is in AUX mode. The LCD screen will turn on and the AUX indicator will illuminate.
Y our AutoVision t Video Entertainment System allows you to watch movie rentals and your favorite home videocassettes. It also allows you to plug in and play a variety of standard video games.
Disconnect video games and video equipment power cords and/or cables when not in use. A void touching auxiliary input jacks with your fingers. Do not blow on them or allow them to get wet or dirty . Do not clean any part of the AutoVision t V ideo Entertainment System with benzene, paint thinner or any other solvent.
T emperature extremes When the vehicle is parked under direct sunlight or in an extremely cold place for a long period of time, wait until the cabin temperature of the vehicle is at normal temperature before operating the system. High/low temperature sensor circuit • Excessively high or low temperatures may cause damage to the VCP .
Cleaning video heads Magnetic video heads convert the videocassette into pictures on the screen during playback. Over a period of time, particles rub off the tape and are left on the heads. Using an old or poor quality tape together with dust and air particles, high temperature and humidity cause dirty heads.
AUTOVISION T V IDEO ENTERTAINMENT SYSTEM Features • 2–head hi-fi playback • AutoPlay feature • Digital auto tracking • Dual stereo headphone with electric volume control • Self docking con.
VCP CONTROLS 1. LED display The display lamp will light up in green when power is supplied to the videocassette player . 2. POWER key Press to toggle between ON/OFF . When the power is ON, other keys (PLA Y , FF , REW , STOP) will illuminate. 3. PLA Y key Press to playback a videocassette tape.
REMOTE CONTROL 1. POWER button Press to turn the videocassette player (VCP) ON or OFF . 2. ENCORE button Press to reverse the cassette for 5 seconds. Normal playback will then resume when in PLA YBACK mode. 3. STILL/ADV ANCE (frame advance button) Press to temporarily suspend playback.
8. REW button Press to rewind the tape. 9. FF button Press to fast forward the tape. 10. STOP button Press to stop the tape. BATTERY REPLACEMENT Batteries are supplied with the remote control unit. However , they are simply for operation check and will only work for a short time.
AUTOVISION T V IDEO ENTERTAINMENT SYSTEM CONTROLS The AutoVision t V ideo Entertainment System controls allow the rear seat passengers to operate the radio, tape, CD or CD DJ (if equipped). PARENTAL CONTROL Y our AutoVision t Video Entertainment System allows you to have control over the rear seat controls.
ADJUSTING THE VOLUME This control allows the rear seat passengers to adjust the volume level of the audio system. Press the + control to increase the volume. Press the — control to decrease the volume. From the AutoVision t V ideo Entertainment System controls, the speaker volume cannot be set higher than the current volume radio setting.
Press the / control again to engage the rear speakers and deactivate the Personal Audio Feature. SINGLE PLA Y will appear in the radio display . For more information on Single Play and Dual Play , please refer to the Rear Seat Controls section in the Entertainment Chapter of your Owner’ s Guide.
MEMORY PRESET CONTROL In radio mode, press the MEM (Memory) control successively to scroll through the memory presets in AM, FM1 or FM2. In CDDJ mode, press the MEM (Memory) control to select the next disc in the compact disc changer . Play will begin with the first track.
FLIP-DOWN SCREEN The screen rotates down to view and up into the housing to store when not in use. Ensure that the screen is latched into the housing when being stored. 1. 6.4” (diagonal) color liquid crystal display (LCD) screen. 2. Screen housing.
GENERAL OPERATION • When the engine is not running, use the system sparingly otherwise it will run the battery down. • Do not leave the videocassette in the VCP overnight or for long periods of time. • When the ignition is turned ON, audio is through the headphones as LOW volume.
2. Connect the left and right audio cables to the WHITE and RED jacks respectively . 3. Ensure that the system is in AUX mode. The LCD screen will turn on and the AUX indicator will illuminate. On-screen indicators Playback operation 1. Press the POWER control on the VCP .
If still playback/or frame-to-frame playback is engaged for five minutes or longer , the VCP will automatically begin playback to protect the tape. Automatic tracking is automatically activated the moment the VCP is turned ON or a cassette is inserted.
V ideo source selection The MEDIA control determines which video (VCP or Auxiliary input) is seen on the AutoVision t screen. When the vehicle ignition is ON and the system is not in VCP mode, the AutoVision t selects the Auxiliary input as the video source.
INDICATIONS ON THE VCP The operation and status of the VCP can be checked by the indications appearing on the LED display . 1. The Power indicator flashes on during POWER ON and will blink when in emergency mode. 2. The HI-FI indicator illuminates when a HI-FI tape is loaded.
Illuminates during power off when there is not a cassette present in the system. Illuminates when the videocassette is in REW (rewind) mode. Illuminates when the videocassette is in FF (fast forward) mode. Illuminates when the videocassette is in STIL (pause) mode.
IN-HOME USE Y our AutoVision t Video Entertainment System is UL registered for in-home use. This system has the unique feature of also being a completely portable and able to be used in your home. T o remove your AutoVision t Video Entertainment System from your vehicle, depress the lever on the center console labeled VCP RELEASE.
1. VIDEO IN Connect this terminal to the VIDEO OUT terminal of your other apparatus (DVD, game machine, etc.). 2. AUDIO IN LR Connect these terminal(s) to the AUDIO OUT terminals of your other apparatus (DVD, game machine, etc.). 3. Plug headphones into these jacks.
デバイスFord 2002 Windstarの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Ford 2002 Windstarをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはFord 2002 Windstarの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Ford 2002 Windstarの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Ford 2002 Windstarで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Ford 2002 Windstarを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はFord 2002 Windstarの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Ford 2002 Windstarに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちFord 2002 Windstarデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。