FreudメーカーJoinery Routerの使用説明書/サービス説明書
ページ先へ移動 of 18
156 ROUTER BITS & SETS Joiner y Bits Dovetail Bits • Compatible with popular dovetail jigs, these bits produce smooth, intricate dovetail joints. • Cuts all composition materials, plywoods, hardwoods, and softwoods. • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
3/8 " 8 ° # 22-120 Dovetail Bits 157 ROUTER BITS & SETS Joiner y Bits Red Item Numbers Indicate 1/2 " Shank All Profile Drawings 1:1 Scale (Continued) 3/8 " 14° # 22-103 3/8 ".
158 ROUTER BITS & SETS Joiner y Bits Butterfly Spline Bit • This bit produces a str ong, attractive method of joining wood. Use a 14-degree dovetail bit to produce the mating gr ooves. • Cuts all composition materials, plywoods, hardwoods, and softwoods.
Rabbeting Bits with Bearing Set • With interchangeable bearings to cut rabbets of dif ferent depths, these sets pr oduce super smooth cuts on both surfaces of the rabbet. • 32-504, 32-524, and 32-526 can also be used as flush cutting trim bits. • Wr ench included.
160 ROUTER BITS & SETS Joiner y Bits Stacked Slotting Set • By changing the bearings this set will cut three dif ferent depths (1/4", 3/8", 1/2"). • Set includes Freud's slotting cutter arbor 60-202, 3 bearings and 4 specially designed slotting cutters.
Biscuit Joining Set • Easy and economical way to join wood. • Cuts all composition materials, plywoods, hardwoods, and softwoods. • Use on hand-held and table-mounted portable routers.
162 ROUTER BITS & SETS Joiner y Bits Three Wing Slotting Cutters • Should be used with Freud's slotting cutter arbors 60-100 for 1/4" shanks and 60-102 for 1/2" shanks. • Compatible with 62-108 bearing. • Cutter 56-109 can be used for biscuit joining.
Slotting Cutter Arbors • For premium performance use with Fr eud slotting cutters, although compatible with any slotting cutter with a 5/16" bore.
164 ROUTER BITS & SETS Joiner y Bits Slotting Cutter Sets • Includes three wing slotting cutter , arbor and ball bearing. • Cuts all composition materials, plywoods, hardwoods, and softwoods. • Use on hand-held and table-mounted portable routers.
Canoe Joint Bits • Bit 99-017 cuts the flute and 99-018 cuts the mating bead. • Cuts all composition materials, plywoods, hardwoods, and softwoods.
166 ROUTER BITS & SETS Joiner y Bits Drawer Lock Bits • Drawer fronts ar e formed horizontally , flat on the table surface. • Drawer sides are formed vertically against the fence of the table. • Cuts all composition materials, plywoods, hardwoods, and softwoods.
167 ROUTER BITS & SETS Joiner y Bits Red Item Numbers Indicate 1/2 " Shank All Profile Drawings 1:1 Scale Lock Miter Bits • Run one board vertically and the piece to be joined horizontally . • 99-035 cuts thinner panels for projects such as humidors and jewelry boxes.
170 ROUTER BITS & SETS Joiner y Bits Raised Panel “V” Joint Bit • Mating surfaces are at an angle, not vertical, so the dark lines like those cr eated by standard finger joint bits ar enot visible. • Bit does not have to be centered in the wood.
Adjustable T ongue & Groove Bit Set • Exclusive Freud design featur es a tongue cutter with opposing shear angles to ensure a flawless finish. • Adjustable at .002 inch increments for stock thickness of 1/2" to 1-1/4" and gr oove widths of 7/32" to 3/8".
170 ROUTER BITS & SETS Joiner y Bits Raised Panel “V” Joint Bit • Mating surfaces are at an angle, not vertical, so the dark lines like those cr eated by standard finger joint bits ar enot visible. • Bit does not have to be centered in the wood.
Finger Joint Bit • Produces a joint that is str onger than the wood itself. • Tips on each side of the bit are of fset, cutting twice as many fingers as you see tips on each side of the bit. • Cuts all composition materials, plywoods, hardwoods, and softwoods.
172 ROUTER BITS & SETS Joiner y Bits V ariable Height Finger Joint Bit • Ideal for joining wood edge-to-edge or end-to-end, because the joint produced is stronger than the wood itself. • Replacement cutters available and uses arbor #60-152. • Allows you complete freedom when pr oducing finger joints.
“V” Panel Bit Set • Set includes spacers that allow you to produce “V” paneling fr om 1/2", 3/4", or 1" thick stock. • Cuts all composition materials, plywoods, hardwoods, and softwoods. • Use on table-mounted portable routers.
デバイスFreud Joinery Routerの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Freud Joinery Routerをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはFreud Joinery Routerの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Freud Joinery Routerの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Freud Joinery Routerで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Freud Joinery Routerを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はFreud Joinery Routerの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Freud Joinery Routerに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちFreud Joinery Routerデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。