Fujitsuメーカーfi-4110EOX2の使用説明書/サービス説明書
ページ先へ移動 of 91
P3PC-E517-01EN TM Color Image Scanner fi-41 10EOX2 Operator ’ s Guide.
2.
ScanSnap! fi-4110EOX2 Operator's Guide i INTRODUCTION Thank you for purchasing the ScanSnap! TM fi-4110EOX2 Duplex Color Scanner product. ScanSnap! fi-4110EOX2 comes with a color image scanner and office applic ations. It is a com- plete Office Solution designed to impr ove your productivity and to solve your office scanning problems.
ii CONTENTS ■ Regulatory Informatio n .......................... ............................... v ■ Note, Liability .................. .................................... ................ viii ■ Preface .......... .............................
ScanSnap! fi-4110EOX2 Operator's Guide iii 3.4 Scanning Documents . ............................... ....................... 26 3.5 Changing Scan Sett ings ..................... ............................. 28 3.6 Scanning Business Cards ........
iv REPAIRS ........................ ............................................................ ................. 73.
ScanSnap! fi-4110EOX2 Operator's Guide v ■ Regulatory Information FCC dec laration This equipment has bee n tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Ru les. These limits are designed to provide reasonable protection against harmful interfere nce in a residential installation.
vi Bescheimigung des Her stellers / Importeurs Hiermit wird bescheinigt, daß der/dieldas fi-41 10EOX2 • In Übereinsstimmung mit den Bestimmungen der EN4501 4(CE) funkentstört ist. • Laut Maschinenlärminformationsverordnu ng 3. GS GV , 18.01.1991:Der höchste Schalldruckpegel bet rägt 70 dB (A) oder weni ger gemäß ISO/7779.
ScanSnap! fi-4110EOX2 Operator's Guide vii About the use of mer cur y The scanner lamp contains mercury . T o avoid unexpected injury , re ad the following carefully . Doing the following actio ns may result in serious personal injuries: • Do not put the substance in the lamp in your mou th as it contains mercury .
viii ■ Note, Liability READ ALL OF THIS MANUAL CAREFULL Y BEFORE USING THIS PRODUCT . IF THIS PRODUCT IS NOT USED CORRECTL Y , UNEXPECTED INJUR Y MA Y BE CAUSED TO USERS OR BYST ANDERS.
ScanSnap! fi-4110EOX2 Operator's Guide ix Symbols Used In This Manual This manual uses the following symbols in ex planations in addition to warning indications. ATTENTION This symbol alerts operators to pa rticul arly important information. Be sure to read this information.
x Screen Examples In This Manual The screen examples in this manual are subjec t to change without notic e in the interest of product improvement. If the actual displayed screen differs from the scree.
ScanSnap! fi-4110EOX2 Operator's Guide xi ■ Safety Precautions WARNING The following describes important warn ings described in this manual. Do not touch the A C cable with wet hands. Do not damage the A C cable . Use only specified A C cables and connector cables Use this scanner only at the in dicated po wer v oltage .
xii Do not install in locations subjec t to oil smoke, steam, humidity , and dust. Do not use the scanner if y ou smell strange odor . T urn the scanner OFF if it is damaged. Do not put liquids inside the scanner . Do not install the scann er in locations su bject to oil smoke, steam, humidity , and dust.
ScanSnap! fi-4110EOX2 Operator's Guide xiii Do not touch the inside of the scanner unless necessary . The following describes important cau tions described in this manual. Do not install the scanner on unstable surfaces. Firmly inse r t the power plug.
xiv Bef ore moving the scanner , disc onnect t he power plug fr om the power outlet. Pr otect the scanner from static electricity . Do not use aer osol spra ys near the scanner . A v oid any contact when scanner is i n use . Disconnect the po wer plug fr om the po wer outlet when the scanner is not used f or a long period of time .
1 ScanSnap! fi-4110EOX2 Operator's Guide 1 Chapter1 BEFORE YOU ST ART USING YOUR SCANNER This chapter describes pre parations you must perform be fore you start using ScanSn ap! product. 1.1 Checking the Contents of the Sca nner Package .........
2 1.1 Checking the Contents of the Scanner Package When you unpack the scanner package, make sure that all of th e parts are included in the package..
1.2 Names and Func tions of Parts ScanSnap! fi-4110EOX2 Operator's Guide 3 BEFORE Y OU ST AR T USING Y OUR SCANNER 1 1.2 Names and Functions of Parts This section describes the names of parts and their functions.
4 Chapter2 CONNECTING ScanSnap! This chapter describes how to connect Scan Snap! product to your personal computer. Before you connect ScanSnap! scanner, install the supplied programs (Adobe ® Acrobat ® , CardMinder and S canSnap! Driver) on your personal comput er.
2.1 Installing ScanSnap! ScanSnap! fi-4110EOX2 Operator's Guide 5 CONNECTING ScanSnap! 2 2.1 Installing ScanSnap! "Installation" is the operation of copying the program files supplied w.
6 4. Exit all currently running programs. ■ Installing Adobe ® Acrobat ® Install Adobe ® Acrobat ® by the following procedure fro m the "Adobe ® Acrobat ® 5.0 CD-ROM" supplied with the scanner. Operation 1. Insert the Adobe ® Acrobat ® 5.
2.1 Installing ScanSnap! ScanSnap! fi-4110EOX2 Operator's Guide 7 CONNECTING ScanSnap! 2 2. The following screen is displayed. Click the [Next] but ton. 3. The following screen is displayed. Click the [Acrobat 5.0] button, an d click the [Install Adobe Acrobat 5.
8 ■ Installing Supplied Programs (Sca nSnap! Driver and CardMinder) Install supplied prog rams for ScanSnap! from the "Setup CD -ROM" supplied with the scanner.
2.1 Installing ScanSnap! ScanSnap! fi-4110EOX2 Operator's Guide 9 CONNECTING ScanSnap! 2 2. Click the [Show Readme] button in the "ScanSnap! Setup" dialog box. This item describes the precautions to follow when installing and uninstall ing ScanSnap!, structure of files in the Setup CD-ROM, and other information.
10 4. Click the [Next] button in the "Welcome to the InstallShield Wizard for the ScanSnap !" ⇒ The "License Agreement" screen is displayed. 5. Check the details of the "License Agreement." If you agree with the details, click the [Yes] button.
2.1 Installing ScanSnap! ScanSnap! fi-4110EOX2 Operator's Guide 11 CONNECTING ScanSnap! 2 ⇒ The "Setup Type" screen is displayed. 7. Select the programs you want to install in the “Setup Typ e” screen. ■ Typical Installs both ScanSnap! Driv er and CardMinder programs.
12 8. In the "Start Copying Files" screen, check the files that will be insta lled, and click the [Next] button. ⇒ This starts installation of ScanSnap! supp lied programs. When installation ends, the "InstallShield Wizard Complete" screen is displayed.
2.1 Installing ScanSnap! ScanSnap! fi-4110EOX2 Operator's Guide 13 CONNECTING ScanSnap! 2 HINT To display the "ScanSnap! fi-411 0EOX 2 Operator’s Guide" and "CardMin der TM User’s Guide," Adobe ® Acrobat ® or Adobe ® Acrobat ® Reader TM is required.
14 2.2 Connecting Your Computer to ScanSnap! Follow the procedure below to conn ect your computer to ScanSnap!. 1. Connect ScanSnap! to the powe r outlet using the AC cabl e. 2. Connect your computer to ScanSnap! using the USB cable. The following describes each of the above two procedures.
2.2 Connecting Your Co mputer to ScanSnap! ScanSnap! fi-4110EOX2 Operator's Guide 15 CONNECTING ScanSnap! 2 ■ Connecting the USB Cable Connect the USB cable by the following procedure. 1. Attach the ferrite core onto the USB cable . 2. Remove the seal put on the rear side of ScanSnap! scanner.
16 4. Insert the other end of the USB conne ctor into the USB port on your computer. ⇒ ScanSnap! is automatically de tected by your compute r. ■ When the OS is Windows ® 98 The "Insert disk" message is displayed. Insert the Windows ® 98 CD-ROM into the CD-ROM dr ive, and click the [OK] button.
2.2 Connecting Your Co mputer to ScanSnap! ScanSnap! fi-4110EOX2 Operator's Guide 17 CONNECTING ScanSnap! 2 The "Hardware Installation" dialog box is displayed. Click the [Continue Anyway] but- ton. The "Found New Hardware Wizard" dialog box notifying you that the Wizard will end is displayed.
18 Chapter3 BASIC SCANNER OPERA TIONS This chapter describes ba sic ScanSnap! operations. 3.1 Flow of Operations .................................................................................. ............. 19 3.2 Scanning Different Documen t Types .
3.1 Flow of Operations ScanSnap! fi-4110EOX2 Operator's Guide 19 BASIC SCANNER OPERA TIONS 3 3.1 Flow of Operations This section describes the flow of operations star ting with scanning of a document on ScanSnap! scanner through to saving the sca nned image in PDF format.
20 3. Press the (Duplex button ) or (Simplex button). ⇒ This starts document scanning. After scanning ends, the supplied application (Adobe ® Acrobat ® , etc.) is started up, and the scanned image is displayed. For details, refer to "3.4 S canning Do cuments" (page.
3.2 Scanning Different Document Types ScanSnap! fi-4110EOX2 Operator's Guide 21 BASIC SCANNER OPERA TIONS 3 3.2 Scanning Different Document Types The table below summarizes the types of docu me nts that can be scanned on this scanner. Media Paper commonly used in offices Ream Weight 52.
22 ATTENTION • T o prevent the rollers from getting d irty and to prevent faulty document feed, avoid scanning documents filled in with pe ncil. If scanning of such documents is necessary , clean the rollers as frequently as possible. • Carbonless p aper can sometimes cont ai n chemical subst ances that might damage the Pad ASSY or rollers (e.
3.3 Loading Documents ScanSnap! fi-4110EOX2 Operator's Guide 23 BASIC SCANNER OPERA TIONS 3 3.3 Loading Documents This section describes how to load documents on the document support. 1. Straighten the edges of the document. 1) Straighten both sides of the do cument stack.
24 3. Load the document on the hopper. Load the document as follows. ■ When loading the document so that both sides are scanned Load the document so that the top side of th e tw o-sided document (in the case of two or more document sheets, the first page ) is towards the ADF paper chute.
3.3 Loading Documents ScanSnap! fi-4110EOX2 Operator's Guide 25 BASIC SCANNER OPERA TIONS 3 4. Adjust the Side guides to the document width. Move the Side guides so that there is no gap between the document edges and the Side guides. If there is a gap between the document edges and the guides, the scanned images may be skewed.
26 3.4 Scanning Documents This section describes how to scan documents loaded on the ADF paper chute . Operation 1. Press the buttons as follows dependin g on the type of document you are scanning. ■ When scanning two sides of the document Press the ( Duplex button).
3.4 Scanning Documents ScanSnap! fi-4110EOX2 Operator's Guide 27 BASIC SCANNER OPERA TIONS 3 ATTENTION If scanning is interrupted by a paper jam error, or other er ror, you can select to save or delete the image s that were scanned. The following error messa ge appears when a scan error occu rs.
28 3.5 Changing Scan Settings The settings that are applied when a document is scanned can be changed. The following settings can be changed: • Application that is automatically star ted up after sc.
3.5 Changing Scan Settings ScanSnap! fi-4110EOX2 Operator's Guide 29 BASIC SCANNER OPERA TIONS 3 2. Change the scan settings in the "Scan a nd Save Settings" screen. The following describes the setting items on each of the tab panels. [Application] tab ■ Application: Specifies the application to be run linked to ScanSnap!.
30 You can select from the following applications: • None. (Scan only) • Adobe ® Acrobat ® • Adobe ® Acrobat ® Reader ™ • CardMinder TM ■ [Add or Remove] button Applications can be registered at "Application" or removed . When you click the [Add o r Remove] butto n, the following scr een is displayed.
3.5 Changing Scan Settings ScanSnap! fi-4110EOX2 Operator's Guide 31 BASIC SCANNER OPERA TIONS 3 <To add an application> 1 Click the [Add...] button. 2 The following screen is displayed. • Click the [Browse...] button, and select either the shortcut file (.
32 <To remove an application> 1 Select the application you want to remo ve in th e "Add or remove application" screen, and click the [Remove] button. 2 The confirmation screen will be displayed tw ice. In either case, click the [Yes] but- ton.
3.5 Changing Scan Settings ScanSnap! fi-4110EOX2 Operator's Guide 33 BASIC SCANNER OPERA TIONS 3 [Save] tab ■ Folder path to save image: Specify the folder to save the scanned image to. When you click the [Browse...] button, the "Browse for Fo lder" screen is displayed.
34 ■ [Filename format...] button Set the name of the file to save the scanned image to. When you click the [File name format...] button, the followi ng screen is displayed.
3.5 Changing Scan Settings ScanSnap! fi-4110EOX2 Operator's Guide 35 BASIC SCANNER OPERA TIONS 3 Clicking the [OK] butto n reflects the settings. (A display example of the file name that yo u set is displayed un der the [File name for- mat...] button.
36 ■ Color mode: Specify whether to scan documents in color or in black-and-white. Select one of the following modes: • Auto (Automaticaly recognize each document color) ScanSnap! automatically re cognizes whether the document to scan is color or black-and-white and switches the scan mode.
3.5 Changing Scan Settings ScanSnap! fi-4110EOX2 Operator's Guide 37 BASIC SCANNER OPERA TIONS 3 ■ Allow automatic noise reduction Mark the checkbox as follows d epending on the type of document you are scanning. • Mark this checkbox when scanning documents containi ng printed or handwritten text.
38 ■ Selecting the file option Specify the type of file for the scanned image. Click [ ▼ ] to select the file format. You can sel ect from the following file formats: • PDF (*.pdf) • JPEG (*.jpg) ■ [Option] button • "Generate one PDF file per scanning button Creates the scanned image as a single PDF.
3.5 Changing Scan Settings ScanSnap! fi-4110EOX2 Operator's Guide 39 BASIC SCANNER OPERA TIONS 3 ■ Paper size: Specify the size of the docume nt to load in the scanner. Click [ ▼ ] to select the size. The following paper sizes (W x L) can be se lected.
40 ■ [Custom...] button Specify the size of the document, that you want to scan, in the dialog box. It is possible to specify sizes in a range from a width of 55 to 216 mm (2.17 in. to 8.5 in.) and a length of 90 mm to 360 mm (3.54 in . to 14.17 in.
3.5 Changing Scan Settings ScanSnap! fi-4110EOX2 Operator's Guide 41 BASIC SCANNER OPERA TIONS 3 [Compression] tab ■ Compression rate: Control the compression rate to specify the size of the file for the scanned image. The compression rate is controlled by moving the slider bar.
42 HINT About the size of image data The following table shows a rough gu ideline for calculating the size of images wh en a single color documen t is scanned in the Simplex mode.
3.6 Scanning Business Cards ScanSnap! fi-4110EOX2 Operator's Guide 43 BASIC SCANNER OPERA TIONS 3 3.6 Scanning Business Cards The following describes how to ma nage scanned images of business cards with "CardMinder" application. CardMinder turns business cards scan ned on the sc anner into image data.
44 Operation <Preparations> 1. Click on the task tray, and select [Setting ] from the menu that is displayed. ⇒ The "Scan and Save Settings" dialog box is displayed. 2. Select "CardMinder" at "Application:" on the [Application] ta b.
3.6 Scanning Business Cards ScanSnap! fi-4110EOX2 Operator's Guide 45 BASIC SCANNER OPERA TIONS 3 <Scanning procedure> 1. Load the business cards upright on the ADF paper chute. 2. Press the (Duplex button) on the ScanSnap! scann er. This starts scanning.
46 3.7 Viewing PDF File Thumbnails ScanSnap! comes with a plug-in application “PDF File Thumbnail View” which allows you to use Explorer to view thumbn ails of PDF data that has been created afte r scanning a docume nt. This is for Windows ® Me, Windows ® 2000, and Windows ® XP.
3.7 Viewing PDF File Thumbnails ScanSnap! fi-4110EOX2 Operator's Guide 47 BASIC SCANNER OPERA TIONS 3 ■ Display thumbnails of PDF files Operation 1. Start Explorer. 2. Select a folder where PDF files that were created after documents were scanned are stored.
48 Chapter4 Uninst alling ScanSnap! "Uninstallation" removes the ScanSnap! program f iles that were copied during installation from hard disk to restore the system en vironment to its original state.
4.1 Uninstalling Supplie d Programs (ScanSnap! Driver and CardMinder) ScanSnap! fi-4110EOX2 Operator's Guide 49 Uninstalling ScanSnap! 4 4.1 Uninstalling Supplied Programs (ScanSnap! Driver and CardMinder) Uninstall programs supplied with Scan Snap! by the following procedure.
50 5. Click the [Remove] button. ⇒ This displays the "Confirm Uninstallation" screen. 6. Click the [OK] button. ⇒ This executes the uninstallation. 7. When uninstallation ends, click the [Finish ] button as follows to close the screen. ⇒ Select "Yes, I want to restart my computer now!" and click the [Finish] button.
5 ScanSnap! fi-4110EOX2 Operator's Guide 51 Chapter5 TROUBLESHOOTING This chapter describes how to clea r document jams, remedy other trouble, and how to replac e con- sumables. 5.1 Clearing Document Jams .........................................
52 5.1 Clearing Document Jams If a document jam occurs while the do cument is being scanne d on the ADF, follow the procedure below to clear the jammed document. • Take care not to get injured when removin g a jammed document. • When removing jammed documents, be care ful no t to get neckties or necklaces entangled in the ScanSnap!.
5.1 Clearing Document Jams ScanSnap! fi-4110EOX2 Operator's Guide 53 TR OUBLESHOO TING 5 4. Push in the center of the ADF to retu rn it to its original position. ⇒ You should hear the ADF click when it returns to its or iginal position. The pick arm moves if the scanner is ON.
54 5.2 Troubleshooting Checklist This section describes common problems occurred during use of ScanSn ap! product and how to remedy them. Before you ask for repair serv ice, check the following items. If you cannot solve the problem after checking the following items, contact an authorized FUJITSU scanner service provider (page.
5.2 Troubleshooting Checklist ScanSnap! fi-4110EOX2 Operator's Guide 55 TR OUBLESHOO TING 5 Vertical line appear in the printed image. Is the inside of the feed sec- tion dirty? Clean the feed section following the instruc- tions in "DAILY CARE" (page.
56 5.3 Replacing Consumables This section describes how to replace consumables. WARNING Fire/Electric Shock Before you replace consumables on the sc anner, disconnect the AC adapter to turn the scan- ner off.
5.3 Replacing Consumables ScanSnap! fi-4110EOX2 Operator's Guide 57 TR OUBLESHOO TING 5 HINT You can us e the followin g procedur e to crate a rough g uideline for when to replace consumable s and for estimating how many sheets ha ve been scanned.
58 ■ Replacing the Pad ASSY Replace the Pad ASSY by the following procedure. 1. Remove the document if the re is a document on the ADF paper chute. 2.
5.3 Replacing Consumables ScanSnap! fi-4110EOX2 Operator's Guide 59 TR OUBLESHOO TING 5 4. When attaching the new Pad ASSY, press dow n on the pick arm with one hand, and attach the Pad ASSY with your other hand. 5. Push in the center of the ADF to retu rn it to its original position.
60 6. Click the "ScanSnap! Monitor" icon in the task tray, a nd select [Check consumable supplies...] from the me nu that is displayed. ⇒ This displays the "Check consumable status" screen. 7. Click the [Reset] button in the "Check consumable status" screen.
5.3 Replacing Consumables ScanSnap! fi-4110EOX2 Operator's Guide 61 TR OUBLESHOO TING 5 ■ Replacing the Pick Roller Replace the Pick roller by the following procedure. 1. Remove the document if the re is a document on the ADF paper chute. 2. Open out the ADF towards you while lif ting up the cover open lever.
62 5. When attaching a new Pick roller, insert the Pick roller so that its claw fits into the hole on the Pick roller on the scanner. Push in the claw and the center of the Pick roller by hand until it i s completely inserted. 6. Attach the ADF paper chute.
5.3 Replacing Consumables ScanSnap! fi-4110EOX2 Operator's Guide 63 TR OUBLESHOO TING 5 9. Click the [Reset] button in the "Check consumable supplies" screen. ⇒ The count for which the [Reset] butto n was clicked is reset to "0".
6 ScanSnap! fi-4110EOX2 Operator's Guide 64 Chapter6 DAIL Y CARE This chapter describes how to clean ScanSnap!. WARNING Fire/Electric Shock Before you clean the scanner, disconnect the AC adapter to turn the scanner off. 6.1 Cleaning Materials ..
6.1 Cleaning Materials ScanSnap! fi-4110EOX2 Operator's Guide 65 D AIL Y CARE 6 6.1 Cleaning Materials *1) To purchase the cleaning material, contact the FUJITSU scanner dealer where you pur- chased the scanner. *2) Any lint-free cloth can be used.
66 6.2 Cleaning the Scanner Exterior and ADF paper chute Clean the scanner exterior and ADF paper chute with a dry clo th moistened with a small amount of cleaner F1 or neutral detergent. ATTENTION • Never use p aint thinner and other organic solvent s.
6.3 Cleaning the ADF ScanSnap! fi-4110EOX2 Operator's Guide 67 D AIL Y CARE 6 6.3 Cleaning the ADF Clean the ADF with a cloth moistened with cleaner F1. As a guideline, clean the ADF after every 1,000 scans. Note that this gui deline varies according to the type of document you are sca nning.
68 2. Clean the following locations with a cloth moistene d with cleaner F1. • Pad ASSY Clean the Pad ASSY top down (in the direct ion of the arrow). When cleaning the Pad ASSY, take care to prevent the cloth from catching on the pick arm or pick spring.
6.3 Cleaning the ADF ScanSnap! fi-4110EOX2 Operator's Guide 69 D AIL Y CARE 6 • Paper guide surface (white part) Clean lightly. 3. Push in the center of the ADF to retu rn it to its original position. ATTENTION Connect the AC adapter a nd AC cable only when cleaning the discharge roll- ers.
70 APPENDIX A Installation Specifications The following table summarizes the insta llation specifications of this scanner. Note) Dimensions Item Specifications Dimensions (Note) Width Depth Height 308.5 mm 12.15 in. 154 mm 6.06 in. 130 mm 5.12 in. Weight 2.
ScanSnap! fi-4110EOX2 Operator's Guide 71 INDEX A About the size of image data .................. 42 AC adapter connector ............................... 3 ADF paper chute ....................................... 3 Allow automatic blank page removal .
72 O Operation panel ............................ ............ 3 P Package .............................. ...................... 2 Paper size ..................................... .......... 39 Paper size tab ..................... ....................
ScanSnap! fi-4110EOX2 Operator's Guide 73 Contact the place of purchase or FUJITSU Image scanner fi s eries service provider to make repairs to this product. • Repairs on this scanner must not be performed by the user. • Repair parts for this scanner are retained fo r five years from discontinuation of production.
74.
z The contents of this manual are subject to change without notice. z PFU LIMITED assumes no liability for incidental or consequential damages arising from th e use of this manual, and any claims by a third party.
デバイスFujitsu fi-4110EOX2の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Fujitsu fi-4110EOX2をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはFujitsu fi-4110EOX2の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Fujitsu fi-4110EOX2の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Fujitsu fi-4110EOX2で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Fujitsu fi-4110EOX2を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はFujitsu fi-4110EOX2の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Fujitsu fi-4110EOX2に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちFujitsu fi-4110EOX2デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。