Fujitsuメーカーfi-5015Cの使用説明書/サービス説明書
ページ先へ移動 of 26
P3PC-1582-01EN Getting Started fi-5015C Image Scanner fi-5015C Image Scanner Printed in Japan Imprimido en Japón Stampato in Giappone Gedruckt in Japan Imprimé au Japon Questo manuale è stampato su carta riciclata. Este manual se ha impreso con papel reciclado.
.
fi-5015C Image Scanner Getting Started i CONTENTS ■ Regulatory Informatio n .......................... .............................. ii ■ Note, Liability .................. ..................................................... iii ■ Safety Precautions .
ii INTRODUCTION Thank you for purchasing th e fi-5015C Color Scanner. This document describes h ow to use fi-5015C and basic operation methods. Before you start u sing fi-5015C be sure to thoroughly read this manual to ensure correct use.
fi-5015C Image Scanner Getting Started iii ■ Note, Liability READ ALL OF THIS MANUAL CAREFULL Y BEFORE USING THIS PRODUCT . IF THIS PRODUCT IS NOT USED CORRECTL Y , UNEXPECTED INJUR Y MA Y BE CAUSED TO USERS OR BYST ANDERS. Also, keep this manual in a safe place so that it can be easily referred to during use of this product.
iv Manufacturer PFU LIMITED International Sales Dept., Imaging Business Division, Produ cts Group Solid Square East T ower , 580 Horikawa-cho, Saiwai-ku, Kawasaki-shi Kanagawa 212-8563, Japan Phone : (81-44) 540-4538 All Rights Reserved, Cop yright© PFU LIMITED 2006 About Maintenance The user must not perform repairs on this scanner .
fi-5015C Image Scanner Getting Started v ■ Safety Precautions Do not damage the AC cable. Use only specified AC cables and connector cables Use this scanner only at the indicated power volt age. Do not connect to multiple- power strip s. Do not touch the AC cable with wet hands.
vi Do not install the scanner on unst able surfaces. Do not block the ventilation ports. Do not place heavy object s or st and on top of the scanner . Firmly insert the power plug. A void any cont act when scanner is in use. Do not use the scanne r immediately after moving it from a cold place into a warm room.
fi-5015C Image Scanner Getting Started 1 Chapter1 PREP ARING THE SCANNER 1.1 Checking the Contents of the Scanner Package When you unpack the scanner package, make su re that the packa ge contains all the p a rts on the list included in the package .
2 ■ Indications on the Function Number Display The following shows the indications on the Functio n Number Disp lay. No. Descriptions 8 Lights only one time upon turni ng on the scanner. P Indicates that the scanner has been turned ON and is being initialized.
fi-5015C Image Scanner Getting Started 3 Chapter2 INST ALLA TION OF THE SCANNER 2.1 Installing the Scanner Application For scanning documents with this scanner, both sc anner driver and im age capturing a p plication software (called "application" hereafter) must be installed on your PC.
4 5. Error Recovery Guide Installation window appears. Error Recovery Guide is a software that d is- plays troubleshooting infor mation on screen when any scanner error occurs. Althoug h this software’s installation is highly r ecommended, it can be installed later if you do not install it in this step.
fi-5015C Image Scanner Getting Started 5 6. When the [InstallShield Wizard Complete] win- dow appears, click [Finish]. For FUJITSU ISIS Scanner Driver ■ Preparation Take out the Setup CD-ROM from its package, but do not insert the Setup CD-ROM into the CD drive yet.
6 7. Follow the instructions on the window to install the application. 8. When the [InstallShield Wizard Complete] window appears, click [Finish]. Your computer will be restarted. Do not remove the Setup CD-ROM from the CD drive until your PC has completely restarted.
fi-5015C Image Scanner Getting Started 7 2. Click [Install Products]. 3. Click [Error Recovery Guide] on the next screen. 4. Select a language to use for the in stallation in the <Choose Setup Language> window and click [OK]. 5. Install the application following the in structions in the window.
8 2. Select the language and Click [OK] button. 3. Select "Install Adobe Acrobat". 4. Click the [Next] button. The set up window appears. 5. Follow the instructions to install the software. ■ Uninstalling Supplied Programs Follow the procedure below to uninstall supplied pro- grams.
fi-5015C Image Scanner Getting Started 9 2. Exit all currently running programs. 3. Select [Control Panel] - [Add or remove Pro- grams] from the [Start] menu. ⇒ This displays the "Add or remove Programs" screen which displays a list of the currently installed applications.
10 4. Connect the ADF cable to the ADF cable con- nector on the scanner, and secure it with screws. 5. Connect the AC adapter. 1) Connect the AC cable to the AC adapter. 2) Connect the AC adapter connector to the scanner’s DC inlet. 3) Plug the AC cable into the outlet.
fi-5015C Image Scanner Getting Started 11 2.4 Confirming Installation To confirm whether the installation was successful, per- form a scanning operatio n with an application that com- plies with either the TWAIN regulations, such as ScandAll 21 or the ISIS regulations such as QuickScan Pro TM .
12 3. Select [Select Scanner...] from [Scan] menu in QuickScan Pro™. And, select fi-5015C from the list of [Scanner:], and then click the [OK] button. 4. Select [Preview Settings...] from the [Scan] menu. Set the scan resolution, paper size and other scanning requirements, and then click [OK].
fi-5015C Image Scanner Getting Started AP-1 Appendix1 TROUBLESHOOTING ■ Troubleshooting checklist Symptom Check this item Remedy Scanner does not turn on. Is the main switch turned on? Turn the main switch on. Have you pushed the power button? Push the power button.
AP-2 * "Multi feed" means that more than 2 papers are fed at the same time. Paper is n ot fed (pic k error occurs frequently, or docu- ment stops midway). Do the documents satisfy the "Docu- ment Quality"in Secti on 2.3.1of the fi- 5015C Operator’s Guide? Scan the document by Flatbed.
fi-5015C Image Scanner Getting Started AP-3 ■ Temporary error The following shows the procedure for releasing of each temporary error. • "U0" error Confirm that the shipping lock is released. Refer to "2.2 Installin g the Scanner" (page 9) • "U1" error 1.
AP-4 Appendix2 DAIL Y CARE ■ Cleaning Materials For details about the cleaning materials, contact the FUJITSU scanner dealer where you purchas ed the scan- ner. ■ Cleaning Method The ADF must be cleaned with a lint-free cloth moist- ened with the Cleaner F1.
fi-5015C Image Scanner Getting Started AP-5 Appendix3 REPLACING CONSUMABLES ■ Consumables and Replacement Cycle The followings are the specif ications of consumables and their recommended replacement cycles. To purchase consumables, contact the store where you purchased the scanner or an authorized FUJITSU scanner service provider.
z Copying of the contents of this manual in whole or in part and copying of the scanner applic ation is forbidden under the copyright la w. z The contents of this manual are subject to change without notice.
デバイスFujitsu fi-5015Cの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Fujitsu fi-5015Cをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはFujitsu fi-5015Cの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Fujitsu fi-5015Cの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Fujitsu fi-5015Cで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Fujitsu fi-5015Cを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はFujitsu fi-5015Cの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Fujitsu fi-5015Cに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちFujitsu fi-5015Cデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
