FujitsuメーカーFI-5110EOXMの使用説明書/サービス説明書
ページ先へ移動 of 20
Color Image Scanner fi-51 10EOXM for Macintosh G G e e t t t t i i n n g g S S t t a a r r t t e e d d Please read this guide before c onnecting the scanner to your PC.
Contents Introduction ............................................................................................................................... ............................ 1 1. Prep aration ......................................................
Introduction Thank you for purchasing the ScanSnap fi-51 10EOXM Color Image Scanner product. ScanSnap, and the Sca nSnap logo are the trademarks of PFU LIMITED. Other prod uct nam es are the tradem arks or registered tra demarks of the respective companies .
Regulatory Information Bescheinigung des Herstellers / Importeurs Für den fi-5110E OX2 wid folgendes bescheini gt: FCC declaration This equipm ent has been tested and f ound to comply with the limits for a Class B digital device, pursuant t o Part 15 of t he FCC Rules.
About the use of mercury Lamp(s) inside this product contain mercury and must be recycled or disposed of according to local, state, or federal laws. arted | 3 The scanner lam p contains mercury. To avoid unexpected i nju ry, read the following carefully.
4 | Safety Precautions CAUTION The following descri bes important cautions. FOLLOW THESE INSTRUCTIONS AND BE SURE TO HEED ALL WARNINGS AND CAUTIONS DESCRIBED BELOW. Install the scanner on a desk so that none of its parts protrude outside of the desktop.
1. Prep aration This chapter describes necessary preparations before using ScanSnap. A TTENTION Do not connect the scanner to your PC before installing “ScanSnap Manager”. If the scanner is connected before installing ScanSnap Manager, it will not operate correctly.
2. Connecting ScanSnap This chapter describe s how to connect ScanSnap to you r compuer. 2.1. Inst alling the Supplied Software Before connecting the scanner to your computer , please install the following so ftware on your computer . c Adobe Acrobat 7.
2.2.2. Connecting the USB cable 2. Double-click the ScanSnap icon. Follow the procedure below to connect the USB cable. arted | 7 B The installation of ScanSnap M anager starts up, and the “W elcome to the ScanS nap Manager Ins taller” window appears.
3 . How to Use ScanSnap T his chapter descri bes basic operatio n of ScanSnap. There are six tab s used to configure the scan optio ns: [Application] 3.
3.3. Scanning Office Document s 1. Select “ Adobe Acr obat ” at [Application:] under the [Application] tab of “Scan and Save Settings”. 2. Load the do cuments on to the sca nner . Set the paper face-down on the Paper chute cover. Scanning direction Set the backside of the paper to the front.
4. T roubleshooting This chapter describ es common prob lems during the usage of ScanSnap and how to remedy them. 4.1. T roubleshooting Checklist Before you ask f or repair service, please check the following items.
Symptom Check This Item Remedy Does your PC satisfy the recommended system requirements ? Check the system requirements in section 2.1, “Before Installing”, of the Operator ’ s Manual. Scanning speed will be slower whenever the CPU and memory require ments are not met.
12 | 4.2. Clearing Paper Jams 1. Open the ADF while pulling the Cover open lever. 2. Remove t he jam med document. 3. Close the ADF cover. ADF cover Click! Cover open lever Ö You should hear the ADF cover click into position when it returns to its o riginal position.
5. Daily Care This chapter describes how t o clean the ScanSnap scanne r. 5.3. Cleaning Inside of the scanner WARNING Fire/Electric Shock Before cleaning the sca nner, disconnect the AC adapter from the power outlet. 5.1. Cleaning Materials Cleaning Materials Parts No.
2. Clean the following locations with a cloth moistened with the Cleaner F1. Pad ASSY (x1) Wipe the pad assy downwards. When cleaning the pad assy, be careful not to get your hand or the cloth ca ught on t he pick spr ing (metal part). Glass (x2 on the ADF cover and the opp osite side) Clean lightly.
6. Replacing Consumables This chapter describes how t o replace consum ables. WARNING Fire/Electric Shock Before you replace the consum ables of this scanner, disconnect the AC adapter from the ou tlet to turn off the scanner.
6.3. Replacing the Pick Roller 16 | A TTENTION Make sure that the Pad ASSY is completely attached. Otherwise, document jams or other feeding errors may occur. 5. Close the ADF cover Ö You should hear the ADF cover click into position when it returns to its orig inal position.
5. Remove the Pick roller with its shaft. Hold the left part of the shaft, and raise it to remove the shaft from the scanner while pu lling the shaft to the left . arted | 17 A TTENTION If the around the pick roller is dirty by paper -powder, it may cause a scanning error.
18 | 11. Close the ADF cover. Ö You should hear the ADF cover click when it returns to its original po sition. 12. Turn o n the scanne r. Ö ScanSnap Manage r icon change s from to . 13. Cli ck and hold the "ScanSnap Manager" icon on the Dock menu, and sel ect [Check consum a ble supplies] from the menu.
デバイスFujitsu FI-5110EOXMの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Fujitsu FI-5110EOXMをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはFujitsu FI-5110EOXMの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Fujitsu FI-5110EOXMの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Fujitsu FI-5110EOXMで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Fujitsu FI-5110EOXMを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はFujitsu FI-5110EOXMの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Fujitsu FI-5110EOXMに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちFujitsu FI-5110EOXMデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
