FujitsuメーカーM10の使用説明書/サービス説明書
ページ先へ移動 of 23
Fujitsu M10/ SP AR C M10 Systems Quic k Guide Manual Code: C120-E677-03EN October 2013.
- 2 - This document describes the basic specifications and system configurations that users need to be familiar with when using Oracle or Fujitsu SP ARC M10 Systems. The document also provides an overview of the SP ARC M10 Systems and indicates the refer - ence manuals for different work phases or purposes.
- 3 - Under standing an Ov er view of the System Lineup The SP ARC M10 Systems lineup consists of the following models that meet various requirements. SP ARC M10-1 This compact model combines both the space-saving and high performance of a single rack unit.
Physical partition(PPAR#00) Hyperviso rH ypervisor Logical domain (Control domain) (primary) Application Applicaton Oracle Solaris Oracle Solaris Oracle Solaris Oracle Solaris Oracle Solaris Oracle So.
The XSCF firmware is a system control facility mounted on SP ARC M10 Systems as standard. The XSCF firmware runs on a dedicated processor (service processor) that is independent of the processors in the server . The XSCF firmware is placed in each chassis of SP ARC M10-1, SP ARC M10-4, and SP ARC M10-4S.
- 6 - External V iews of the Chassis and System Configuration Examples The following pages show external views of the chassis and system configuration examples for different models.
SP ARC M10-1 Lever Disk drive USB port Panel LEDs Mode switch Power switch Lever Operation panel Power supply units USB port GbE LAN ports SAS port Serial port Locator LED XSCF LED XSCF USB port XSCF-LAN port PCI Express slots - 7 - A single SP ARC M10-1 is used in this configuration.
SP ARC M10-4 A single SP ARC M10-4 unit is used, not as a building block, in this configuration. Up to eleven PCI expansion units can be connected to it.
SP ARC M10-4S (1) Front cover USB port Disk drive Power supply unit (*) Panel LEDs BB-ID switch Mode switch Power switch Operation panel Fan unit (*) Power supply units SAS port USB port GbE LAN ports.
SP ARC M10-4S (2) Front cover Fan unit (*) Operation panel Mode switch Power switch Panel LEDs BB-ID switch XSCF DUAL control port XSCF BB control port XSCF LEDs XSCF-LAN port Serial port XSCF USB por.
SP ARC M10-4S (3) BB#00 BB#01 BB#02 BB#03 : Crossbar unit : Power cabl e X BBOX #80 BB#00 BB#01 BB#02 BB#03 BB#04 BB#05 BB#06 BB#07 X BBOX #81 : C rossbar unit : Crossbar unit XBB OX: Crossbar bo x XB.
SP ARC M10-4S (4) BB#04 BB#05 BB#06 BB#07 BB#00 BB#01 BB#02 BB#03 BB#08 BB#09 BB#11 X BBOX #82 X BBOX #83 X BBOX #80 X BBOX #81 : Crossbar unit : Crossbar unit XBB OX: Crossbar bo x XBBOX: Crossbar bo.
PCI expansion unit (Option) Front cover Fan unit (*) LED Power supply units Link board PCI Express slot - 1 3 - External views of the PCI expansion unit The optional PCI expansion unit can be connected to either the SP ARC M10-1 chassis or the SP ARC M10-4/M10-4S chassis.
- 1 4 - System Specifications Item SP ARC M10-1 SP ARC M10-4 SP ARC M10-4S External dimensions (*1) Height 1U 4U 4U Height x width x depth 42.5 mm x 431 mm x 721 mm (1.7 in. x 17.0 in. x 28.4 in.) 175 mm x 440 mm x 746 mm (6.9 in. x 17.3 in. x 29.4 in.
- 1 5 - Item SP ARC M10-1 SP ARC M10-4 SP ARC M10-4S Built-in I/O Built-in disk (SAS) 8 (HDD/SSD) 8 (HDD/SSD) 8 (HDD/SSD) Built-in disk hardware RAID Mounted Mounted Mounted Built-in CD-RW/ DVD-RW dri.
- 1 6 - Item SP ARC M10-1 SP ARC M10-4 SP ARC M10-4S eXtended System Control Facility (*6) External interface 2 XSCF-LAN ports 1 serial port 1 USB port 2 XSCF-LAN ports 1 serial port 1 USB port 2 XSCF.
- 1 7 - Item PCI expansion unit External dimensions (*1) Height 2U Height x width x depth 86 mm x 440 mm x 740 mm (3.4 in. × 17.3 in. × 29.1 in.) Weight 22 kg Number of PCIe slots 11 Redundant con.
2. Operation and Administration - 1 8 - W hat Do I Do No w? R eference Guide (by Phase/Pur pose) 1. Installation 1-a. Understanding overview 1-b. Installing and connecting 1-c. Adding optional component 1-d. Initial settings (XSCF , resource) 2-c. Conguring system (*) (Power supply setting, etc.
1. Installation - 1 9 - Before installing the system, confirm that the installation location meets the requirements. After confirmation, install and connect the chassis required for the system configuration. Reference Fujitsu M10/SP ARC M10 Systems Installation Guide "1.
2. Operation and Administration - 20 - Configure the entire system including power control. The green IT function mini - mizes the power consumption of the system. Reference Fujitsu M10/SP ARC M10 Systems System Operation and Administration Guide "Chapter 4 Conguring the System to Suit the Usage T ype" c.
2. Operation and Administration - 21 - e. Configuring a highly reliable system Y ou can use memory mirroring or the hardware RAID function to improve system reliability . Reference Fujitsu M10/SP ARC M10 Systems System Operation and Administration Guide "Chapter 14 Conguring a Highly Reliable System" f.
3. Expansion and Maintenance - 22 - Y ou can flexibly expand or reduce the system by adding or removing a SP ARC M10-4S in the building block system. Reference Fujitsu M10/SP ARC M10 Systems Installat.
3. Expansion and Maintenance - 23 - If an error message appears on the console or the CHECK LED on the chassis goes on, diagnose whether a failure has occurred.
デバイスFujitsu M10の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Fujitsu M10をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはFujitsu M10の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Fujitsu M10の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Fujitsu M10で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Fujitsu M10を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はFujitsu M10の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Fujitsu M10に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちFujitsu M10デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。