FujitsuメーカーN6110の使用説明書/サービス説明書
ページ先へ移動 of 29
1 Fujitsu LifeBook N Series BIOS Guide LifeBook N Series Models: N6110 Document Date: 10/21/2005 Document Part Num ber: FPC58-1431-0 1 FUJITSU COMPUTER SYSTEMS.
2 LifeBook N Series Notebook BIOS N Series BIOS BIOS SETUP UTILITY The BIOS Setup U tility is a program that sets up the operating en vironment for y our notebook. Y our BIOS is set at the factory for nor mal operating conditions, therefor e there is no need to set or change the BIOS environment to op erate your noteboo k.
3 3. If an error message is displa yed on the screen, and you want to enter the setup utility , press the [F2] key . 4. W hen the setup utility star ts with a fault present, the system display s the following message: Warning! Error message [Continue] 5.
4 LifeBook N Series Notebook BIOS MAIN MENU – SETTING STAN DARD SYSTEM PARAMETERS The Main M enu allows y ou to set or view the current system parameters. F ollow the instructions for N avi- gating Through The Setup Utility to mak e any changes. (See N av igating Through The Setup Utility on page 2 fo r more information.
5 Primary Master: Selects Primary Master submenu The product number of the hard drive. Display the type of device on this A T A/A T A PI interface, if there is one. Pressing the Enter key selects the Pr imary Master submenu allowing additional device c onfiguration options for this inter- face.
6 LifeBook N Series Notebook BIOS Primary Master Submenu of the Main Menu The Primary Master submenu identifies what A T A dev ices ar e installed. Figure 2.
7 T ransfer Mode: ■ Standard ■ Fast PIO 1 ■ Fast PIO 2 ■ Fast PIO 3 ■ Fast PIO 4 ■ FPIO 3 / DMA 1 ■ FPIO 4 / DMA 2 [Multiword DMA 2] Indicates the method f or moving data to/from the drive. This option cannot be changed when Auto is select ed.
8 LifeBook N Series Notebook BIOS Primary Slave Subme nu of the Main Menu The Primary Slave submen u allows y ou to co nfigure seco ndar y A T A dev ices.
9 Maximum Capacity: ■ Display only –— Displays the maximum capacity of the drive ca lculated from the parameters of the hard disk when Auto is selected and the type is identified as hard disk, or User is selected.
10 LifeBook N Series Notebook BIOS Serial A T A Port 0 Submenu of the Main Menu The Serial A T A P ort 0 submenu indicates whether serial A T A P ort 0 dev ices are auto-typed at boot time.
11 ADVANCED MENU – SETTING DEVICE FEATURE CONTROLS The Ad vanced M enu allows y ou to: ■ Set the keyboar d and mouse features. ■ Select between the display panel and an e xternal CR T display or video projector . ■ Enable or disable compensation for your display .
12 LifeBook N Series Notebook BIOS USB Features When selected, opens the USB Features submenu to allow you to enable or disable the legacy support and SCSI SubClass support (e.
13 Keyboard Features Submenu of the Advanced Menu The K e yboard Fe atures submenu is for enabling or disabling the N umLock feature. Figure 6. Keyboard Features Submenu T able 6: Fields, Options and .
14 LifeBook N Series Notebook BIOS Vid eo Features Submenu of th e Advanced Menu The V ideo Features S ubmenu is for setting the display parameter s. Figure 7.
15 Internal Device Configurat ions Submenu of the Advanced Menu The Internal Device Configuration submenu allo ws the user t o configur e other internal devices.
16 LifeBook N Series Notebook BIOS CPU Features Submenu of the Advanced Menu The CPU Featur es Submenu pr ovides options for enabl ing or disabling the SpeedStep® T echnology feature.
17 XD Bit functionality: ■ Disabled ■ Enabled [Enabled] Allows the user to enable and disable the Execute Disable Bit functionality . Execut e Disable Bit al lows the processor to classify areas in m emory where application code can and cannot execute.
18 LifeBook N Series Notebook BIOS USB Features Submenu of the Advanced Menu The USB F eatures Submen u pro vides options for enabling or disabling legacy USB su pport.
19 Miscellaneous Configuratio ns Submenu of the Advanced Menu The Misc ellaneous Configurations Submenu pr ovides options for enabling or disabling the power button, the W ake Up On LAN feature, and the W ake U p On USB featur e, and for enabling or disabling the system beep.
20 LifeBook N Series Notebook BIOS Event Logging Sub menu of the Advanced Menu The E vent L ogging Submenu configures ev ent logging features for DMI events.
21 SECURITY MENU – SETTING THE SECURITY FEATURES The Security menu allows y ou to set up the data security features of y our notebook to fit your operating needs and to v iew t he cur rent secur it y configur ation. Follow the instructions for Na v igating Through the Setup Utility to mak e any c hanges.
22 LifeBook N Series Notebook BIOS Exiting from the Security Menu W hen you ha ve finished setting the parameters on the Security Men u, you can eithe r exit from setup utility or mov e to another menu. If y ou wish to exit from setup u tility , press the Esc k ey to go to the Exit M enu.
23 Hard Disk Security Submenu of the Security Menu The Har d Disk Securi ty Submenu is for co nfiguring hard disk secu rit y features. Figure 14. Hard Disk Security Submenu T able 14: Fields, Options .
24 LifeBook N Series Notebook BIOS Owner Informatio n Submenu of the Security Menu The Owner Information Su bmenu is for setting o w ner inform ation. Not e that the owner information and foreground and background colors cannot b e set w ithout having entered a Superv isor password.
25 BOOT MENU – SELECTING THE OPERATING SYSTEM SOURCE The Boot Me nu is used to select the order in which the BIOS searches sources for the operating system. Follow the instructions for Na v igating Through the Setup Utility to mak e any c hanges. (See N av igating Through The Setup Utility on page 2 for mor e information.
26 LifeBook N Series Notebook BIOS Boot Device Priority Submenu of the Boot Menu The Boot Dev ice Priority Submenu is for setting the or der of checking of sources for the operating system. Figure 17. Bo ot Device Priorit y Submenu ■ Be aware of the operating environment when booting from a CD-ROM/DVD-ROM or you may over- write files by mistak e.
27 Exiting from Boot Menu W hen you hav e finished setting the boot paramet ers with the Boot menu, y ou can either exit from the setup utilit y or move t o another menu. If y ou wish to exit from the setup utility press the Esc key to g o to the Exit menu.
28 LifeBook N Series Notebook BIOS INFO MENU - DISPLAYS BA SIC SYSTEM INFORMATI ON The Info menu is a display only scr eens that provides the configuration i nformation for y our notebook. The following table shows the names of the menu fields for the Info men u and the information displayed in those fields.
29 EXIT MENU – LEAVIN G THE SETUP UTILITY The Exit M enu is used to leav e the setup utility . Follow the instructions for Na v igating Through the Setup Utility to mak e any c hanges. (See N av igating Through The Setup Utility on page 2 for mor e information.
デバイスFujitsu N6110の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Fujitsu N6110をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはFujitsu N6110の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Fujitsu N6110の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Fujitsu N6110で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Fujitsu N6110を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はFujitsu N6110の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Fujitsu N6110に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちFujitsu N6110デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。