FujitsuメーカーP2WW-2410-01ENZ0の使用説明書/サービス説明書
ページ先へ移動 of 45
How to use ScandAll PRO P2WW-2410-01ENZ0.
.
How to use ScandAll PRO i CONTENTS Chapter 1 LAUNCHING AND SETTINGS ................................ 1 1.1 Launching ScandAll PRO ......................... ......................... 2 1.2 Selecting a Scanner Driver ................. ..................
ii INTRODUCTION Thank you for using ScandA ll PRO. ScandAll PRO is application software to show the list of images scanne d with the FUJITSU fi-series image scanner and edit those images. ScandAll PRO has the following features: • Both TWAIN/ISIS stan dards are supported.
How to use ScandAll PRO iii Use in High-safety Applications This product has been de signed and manufactured on the assumption that it will be used in office, personal, domestic, regular industri al, and general-pu rpose applications.
iv Regulatory Information Symbols Used In This Manual Screen Examples In This Manual The screen examples in this manual are subject to change without notice in th e interest of product improvement.
1 How to use ScandAll PRO 1 Chapter 1 LAUNCHING AND SETTINGS This chapter describes how to launch and set ScandAll PRO. In this chapter Windows XP screenshots are ill ustrated. The screens and operations may differ slightly depending on the operating sy stem (OS) or the scanner model used.
2 1.1 Launching ScandAll PRO This section describes how to launch ScandAll PRO. 1. From the [Start] menu, select [All Pro grams] D [Fujitsu ScandAll PRO] D [Fujitsu ScandAll PRO].
1.2 Selecting a Scanner Driver How to use ScandAll PRO 3 LA UNCHING AND SETTINGS 1 1.2 Selecting a Scanner Driver ScandAll PRO supports both TWAIN and ISIS sta ndards and allows you to invoke either the TWAIN driver or the ISIS driver for scanning im ages with the scanner.
4 1.3 Selecting a Scanner To scan documents with a scanner, you have to select its name from the list beforehand. The following expla ins how to select a scanner to use. 1. From the [Scan] menu, select [Select Scanner]. 2. Select a scanner you want to use.
1.4 How to Display the Scanner Driver Setup Dialog Box How to use ScandAll PRO 5 LA UNCHING AND SETTINGS 1 1.4 How to Display the S canner Driver Setup Dialog Box You can configure settings for scanning documents with the selected scanner in the setup dialog box of a s canner drive r.
6.
How to use ScandAll PRO 7 2 Chapter 2 HOW T O SCAN DOCUMENTS This section describes how to scan documents with ScandAll PRO. In this chapter Windows XP screenshots are ill ustrated. The screens and operations may differ slightly depending on the operating sy stem (OS) or the scanner model used.
8 2.1 Scan In this section, the scanning cond ition, such as file format, save-in folder or other scanning option, is specified before each scanning. 1. Place the document on the scanner. 2. From the [Scan] menu, select [Scan Settings]. Or, select the [Scan Settings] button ( ) on the toolbar.
2.1 Scan How to use ScandAll PRO 9 HO W T O SCAN DOCUMENTS 2 [Save to file] Checkbox To save scanned document im ages immediately after scanni ng, mark this checkb ox. If you want to verify scans before savin g them t o file, clear this checkbox. Folder Name You can spec ify a folder to save scanned document images.
10 Compression You can select how to compress files to save. Document When scanning a document containing more than one pag e, you can specify whether to create one file containing all pages or to divi de into files each containing the specified number of pages.
2.1 Scan How to use ScandAll PRO 11 HO W T O SCAN DOCUMENTS 2 6. When you finished setting, c lick the [OK] button in the dia log box (FUJITSU TWAIN 32 Scanner Driver/ FUJITSU ISIS Scanner Driver). ⇒ You are returned to the [Scan Setting] dialog box.
12 For the scanning operations other than described above, refer to "2. 2 Batch Scan" and "Chapter3 SCANNING VARIOUS TYPES OF DOCUMENTS" .
2.2 Batch Scan How to use ScandAll PRO 13 HO W T O SCAN DOCUMENTS 2 2.2 Batch Scan You can save various settings as profiles beforehand. Batch Scan allows you to scan documents by usin g those profiles. 2.2.1 Creating/Editing Profiles Creating, editing and deleting pr ofiles are described as follows.
14 2. Do the following as necessary: • To create a new profile: Click the [Add] button. ⇒ A new profile appears in the [Profile Editor] dialog box. (Go to step 3 .) • To create a new profile based on an existing profile: Select a profile you want to use as the basis fro m the profile list, and then click the [Copy] button.
2.2 Batch Scan How to use ScandAll PRO 15 HO W T O SCAN DOCUMENTS 2 [General] Tab You can type in a profile name an d de scription, and select a profile type. [Scan] Tab You can configure settings for a scanner to use. Clicking the [Detail Scanner Settings] butt on displays the setup dialog b ox of the scanner driver.
16 2.2.2 Scanning Documents There are three methods to scan docume nts. Each method is explained belo w. (1)Scanning by selecting a profile from the toolbar 1. Place the document on the scanner. 2. From the [Select the Batch File] drop-down list on the toolbar, select a profile to use.
2.2 Batch Scan How to use ScandAll PRO 17 HO W T O SCAN DOCUMENTS 2 ⇒ A document is scanned with the scanner, an d the scanned document image is displayed on the ScandAll PRO window, and th en the image is saved to file. Depending on the se ttings of ScandAll PRO, images may not be displayed on the Scan- dAll PRO window.
18 3. Select a profile you want to u se for scanning. 4. Click the [Scan] button. ⇒ A document is scanned with the scanner, an d the scanned document image is displayed on the ScandAll PRO window, and th en the image is saved to file. Depending on the se ttings of ScandAll PRO, images may not be displayed on the Scan- dAll PRO window.
2.2 Batch Scan How to use ScandAll PRO 19 HO W T O SCAN DOCUMENTS 2.
20.
How to use ScandAll PRO 21 3 Chapter 3 SCANNING V ARIOUS TYPES OF DOCUMENTS This chapter describes how to scan various types of documents, us ing the combination of ScandAll PRO and FUJITSU TWAIN 32 Scanner Driver as an example. For the scanning metho ds other than described in th is chapter, refer to the Operator's Guide of the scanner.
22 3.1 Saving Scanned Images in PDF Format You can create PDF files from the scanne d document images by either of the following two ways: The method by ScandAll PRO is described b elow. • From ScandAll PRO Recommended for scanning in color or grayscale mode.
3.1 Saving Scanned Im ages in PDF Format How to use ScandAll PRO 23 SCANNING V ARIOUS TYPES OF DOCUMENTS 3 4. To configure PDF-related settings, click the [PDF Option ] button ( ).
24 Compression Rate Move the slider bar to change the compression rate. The compression rate can be changed in five levels from 1 to 5. (By default, the compression rate is set to 3.) Moving the slider bar to right increases the compression rate. The higher the com- pression rate, the smaller the file si ze, but the image qu ality is degraded.
3.1 Saving Scanned Im ages in PDF Format How to use ScandAll PRO 25 SCANNING V ARIOUS TYPES OF DOCUMENTS 3 [Make only the first page searchable ] Checkbox When scanning a document containing multiple pages, you can make only the first page searchable.
26 3.2 Scanning by Pressing the Scan Button on the Scanner With ScandAll PRO, you can perform batch scan at a press of the button, by assigning a Batch Scan profile to the [S can] or [Send to] button. The following shows the procedure to do so. 1. From the [Start] menu, select [Control Panel].
3.2 Scanning by Pressing t he Scan Button on the Scanner How to use ScandAll PRO 27 SCANNING V ARIOUS TYPES OF DOCUMENTS 3 7. Click the [OK] button. 8. Launch ScandAll PRO. From the [Start] menu, select [All Programs] D [Fujitsu ScandAll PRO] D [Fujitsu ScandAll PRO], and then ScandAll PRO starts up.
28 12. Click the [OK] button. 13. Exit ScandAll PRO. ⇒ When you press the linked button, ScandAll PR O starts up, and batch scan is executed according to the selected profile’s settings. HINT You have to create profiles beforeh and. For information abou t how to create profiles, refer to "2.
3.3 Splitting Docum ents by Patch Code How to use ScandAll PRO 29 SCANNING V ARIOUS TYPES OF DOCUMENTS 3 3.3 Splitting Documents by Patch Code ScandAll PRO supports a job separation function w ith patch code sheets.
30 5. Insert patch code sheets to wherever you want the file/folder to sep arate. 6. Specify the created batch profile, and then perform the batch sca n. For how to perform the batch scan, refer to "2.2 Batch Scan" . HINT • T o suppress scanning the p atch co de sheet images, check the [Remove separation sheet] checkbox.
3.3 Splitting Docum ents by Patch Code How to use ScandAll PRO 31 SCANNING V ARIOUS TYPES OF DOCUMENTS 3 HINT When storing each of the scanned documents, which are separa ted with patch-code sheets, i.
32 3.4 Scanning Using Barcodes ScandAll PRO supports a job separation function w ith barcode-printed sheets (hereinafter referred to as the "barcode"). The barcod e-based job separation func tion can divide multiple pages of scanned images into pre-determined unit and save them to different fold ers separately without interruption.
3.4 Scanning Using Barcodes How to use ScandAll PRO 33 SCANNING V ARIOUS TYPES OF DOCUMENTS 3 The procedure is described below. 1. Create a new batch profile on ScandAll PRO, and open the [Profile Editor] window. For information about ho w to create profiles, refer to "2.
34 4. Click the [Setup] button. ⇒ The [Barcode Setting] dialog box appears. HINT • T o suppress scanning the p atch co de sheet images, check the [Remove separation sheet] checkbox.
3.4 Scanning Using Barcodes How to use ScandAll PRO 35 SCANNING V ARIOUS TYPES OF DOCUMENTS 3 5. Insert the barcode-printed sheets to where v er you want the file/folder to separate. 6. Specify the created batch profile, and then perform the batch sca n.
36 HINT When storing each of the scanned documents separated with barcode- printed sheets in separa te folders, and naming the folders with barcode recognition result strings, change the settings in th e [Name Rule] dialog box opened by clicking the [Name Rule] button on the [File format and Name scheme] tab.
How to use ScandAll PRO IN-1 INDEX A [Add a Document Open Password to created PDF files] Checkbox .............. ........... 25 B [Basic] Tab ............................... ........... 23 Batch Scan ............................ .......... 7 , 13 C Color Format .
IN-2 [Show TWAIN dialog befo re each batch scan process] Checkbox ................ ........... 10 Splitting Documents by Patch Code ....... 29 U [Use a fixed password] Checkbox .
z The contents of this manual are subject to change without notice. z PFU LIMITED is not liable whatso ever for any damages resulting from the use of this scanner a nd procedures described in this manual, profit loss due to defects, and any claims by a third party.
デバイスFujitsu P2WW-2410-01ENZ0の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Fujitsu P2WW-2410-01ENZ0をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはFujitsu P2WW-2410-01ENZ0の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Fujitsu P2WW-2410-01ENZ0の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Fujitsu P2WW-2410-01ENZ0で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Fujitsu P2WW-2410-01ENZ0を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はFujitsu P2WW-2410-01ENZ0の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Fujitsu P2WW-2410-01ENZ0に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちFujitsu P2WW-2410-01ENZ0デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
