FujitsuメーカーP3PC-1492-04ENC2の使用説明書/サービス説明書
ページ先へ移動 of 187
FUJITSU TW AIN 32 Scanner Driver Scanner Utility for Microsof t ® Windows ® V ersion 9.20 User's Guide For Use with Microsof t ® Windows ® 98, Windows ® Me, W indows ® 2000, Windows ® XP and Windows Server TM 2003 (* For Windows ® 95 and Windows NT ®, 4.
i Intr oduction Thank you for purchasing the "Scanner Utility for Microsoft ® Windows ® V9.20". This software contains a TWAIN-compliant image scanner driver (simply ca lled "driver" in this guide) and utilities.
ii T rademarks Microsoft, Windows, Windows NT and Windows Serv er are registered trademarks of Microsoft Corporation in the United States and/or other countries. I ntel, MMX, Pentium are registered trademarks of Intel Corporation. Adobe, Acrobat are the trademarks or registered trademarks of Adobe Systems Incorporated.
iii Organization This manual explains how to install and use this driver, and how to use the TWAIN scanning utility. • Installation This section explains the procedure for insta lling the environments in which this driver may operate. • Using the Driver This section explains how to use the driver.
iv Contents 1. Outline .............................................................................................. 1 1.1 Characteristics of this Dr iver ........................................................................... 1 1.2 Operating Envi ronment .
v 4.7.6 Filter ..................................................................................................................... 52 4.7.7 Compression .................................................................................................
vi 7.2 Device Trouble Relate d to Oper ation .......................................................... 112 7.3 Device Trouble Relate d to Insta llation ........................................................ 113 8. Appendix .........................
1 1. Outline 1.1 Characteristics of this Driver • This driver complies with TWAIN regulations V1 .9 (the latest version as of June 2006), which are global standards for image scanners . The driver can be used in all TWAIN- compliant applications. • This driver also supports an image scanner that has the "double-sided scan" function.
2 − Windows ® XP − Windows ® Server TM 2003 • USB port • RAM: 32 MB or more (a minimum of 64 MB is recommended) • Available hard disk space: 10 MB or more (excluding the area for storing images) • CD-ROM drive (required for installation) • Mouse (recommended) 1.
3 ◊ Notes on operation procedures If some menus need to be operated in a certain order, the procedural order is described as follows: [A] - [B] - [C] In accordance with this description, operati on [A] is executed first, followed by [B] and [C] in that order.
4 2. TWAIN 2.1 TWAIN TWAIN is the specification that defines the st andard software prot ocol and application programming interface (API) for data exchange be tween a software application program and an image input device such as the image scanner.
5 2.2 TWAIN Application TWAIN mainly applies to the following three software components: Application software Source manager Source The components are related to each other as shown below. Application softw ar e (p ho to ret o uc hing so ft w are , e tc ) So ur ce ma na ger (TWAI N.
6 3. Installation 3.1 Preparation 1. Make sure that the operating sy stem (OS) is installed correctly. 2. In case of the SCSI connection, confirm that th e SCSI adapter is connected to your PC and operating correctly. In case of the USB connection, confirm that the USB port is installed in your PC.
7 3.2 Installing the Scanner Driver The Windows ® XP screen sample s are shown below. The screen and operations will differ slightly depending on the OS that is being use d. 1. Turn on the scanner. 2. Turn on your PC and Log o n to Windows ® . When using Windows ® 20 00, Windows ® XP or Windows Server TM 2003, log on as an administrator.
8 In case of Windows ® 2000 In case of Windows ® XP, Windows Server TM 2003 3. Insert the Setup CD-ROM into the CD-ROM drive. <SETUP DISK START UP SCREEN> is displayed. This Dialog is not displayed automatically when "Auto play" setting of your PC is off.
9 4. Click [INSTALL PRODUCTS]. (* Depending on the scanner model, the different screen may appear.) 5. Click [TWAIN Driver] (* Depending on the scanner model, the different screen may appear.) Depending on the scanner model, the screen which confirms whether “Error Recovery Guide” is installed or not is displayed.
10 6. Select the language you use in [Choose Se tup Language], then click [OK] button. 7. Click [Next >] button. 8. Read the information of README File, and then click [Next >] button.
11 9. Read the License Agreement carefully, a nd then click [Yes] button if you agree. If you click [No] button, t he installation is stopped. 10. Confirm Destination Folder, and then click [Next >] button. Usually, it is not necessary to change Destination Folder.
12 12. Confirm Program Folder, and then click [Next >] button. Usually, it is not necessary to change the Program Folde r’s name. 13. Click [Next >] button, and copying files is started. 14. Select “Yes, I want to restart my comput er now”, and then click [Finish] button.
13 In case of Windows ® 98 There is a request to insert a disc. When this happens, insert the Windows ® 98 CD-ROM in your CD-ROM drive. In case of Windows ® 2000 [Digital Signature not Found] is displayed, click [Yes] button. In case of Windows ® XP, Window s Server TM 2003 1) [Found New Hardware Wizard] is di splayed, click [Next >] button.
14 Now, the installation of scanner driver is completed..
15 3.3 Uninstall The uninstall process removes the software and returns the hard disk to its pre-installation state. When you want to remove this scanner driver program from your PC, uninstall by the following procedures. 1. Turn on your PC and Log o n to Windows ® .
16 4. Using the Driver 4.1 Selecting the Driver To use this driver from the TWAIN applicati on, select "FUJITSU <Product ID>" from the TWAIN data source (driver) selection screen. For general application, the data source selection screen is displayed by selecting the [Select S canner] or [Acquire .
17 4.2.1 Linkage to Image Processing Software Option When the “Enable Software IPC” checkbox is marked after installation of “Image Processing Software Option” (sol d separately or included as a standard function)*, there appears setting items of Image Processing Soft ware Option in a part of the Setting Window for TWAIN Driver.
18 4.3 Displaying Driver Information ♦ Image scanner name The model name, option port name, and capacity of internal scanner memory (in units of megabytes) of the connected image scanner are displayed. If no image scanner is connected, this field is blank.
19 4.4 Setting Information on Image Scanning ♦ Current side When a scanner that allows duplex scanning is used, specifies the page which sets the image scanning information.
20 - Output mode Multi Image Output One scan outputs both a Color/Grayscale and a Binary B/W image. Auto color Detection Outputs either a Color/Grayscale or a Bi nary B/W image depending on whether the document is color or black and white. - Order (for Multi Image Output) Specify the output order of images when scanning in Multi Image Output mode .
21 When you use the "Multi Image" functi on (Multi Im age Output and Auto Color Detection) together with the "Filter" functi on (Page Edge Filter and Digital Endser), the "Filter" setting is common to both Multi Image Output and Auto Color Detection.
22 ♦ Paper Size Specifies a document size for scanning. Select a standard size or [Custom] size (can be registered up to three) from the list. Window for customizing the paper size will a ppear when you click on […] button besides the list. On this window, you can change the order of the paper size in the list.
23 Specifies the start position, width and length for the image scan. The maximum allowable size is the paper size selected previously. In addition, the minimum size is 1.000 inch, 26 millimeters, or pixels (number of dots per inch) according to the un it that has been set.
24 Long page (Front Side) Scans a document longer than the paper size which can be specified by [Paper Size]. In this case, only the front sides of documents are scanned. When this option is selected, the "Paper Size Setting" dialog box opens.
25 Some versions of the scanner do not support this scanning mode. For details contact the retail store where the device was purchased. 4bit Gray scale Scans data using 16-level monochrome gray scale. Data size is smaller than "Gray scale" selected.
26 SDTC, DTC mode To enable the auto binary function of th e image scanner, specify this option. If this option is selected, the "Thr eshold" setting will be disabled. In addition, auto binary has two modes: " SDTC Mode" and "DT C Mode".
27 Some scanner models do not support this function. See "Relevant Image Scanner Specification" in Appendix..
28 ♦ Scanning Parameters For fine scan adjustments. Since there is no fixed set of values, set by trial and error. ◊ Brightness: Sets the brightness of the overall image. Specify the brightness with a number in the range of 1 (bright) to 2 55 (dark).
29 4.5 Specif ying Driver Operation ♦ [Preview] Scans in a preliminary image based on set valu es, and displays the image in the preview window. Before actual scanning, the preview function can be used to display the entire document for specifying the desired scan area.
30 ♦ [Help] Displays online help. When the [F1] key is pressed, help information regarding the item on which the cursor is placed is displayed. Note Depending on the applicat ion used help information may not be displayable with the [F1] key.
31 4.6 Setting "Scanning Area" Specify the scanning area in the preview window as follows: Setting: 1. Press the left mouse button to specify the origin (top left corner) of the scanning area. (The cursor appears as a "+".) 2. Drag the mouse to show the outline of th e scanning area.
32 4.7 Setting Options The "option dialog" is used to set device-specifi c functions and the items that differ depending on whether the scanner used supports them.
33 The options are described below: 4.7.1 Rotation Figure Option dialog (Rotation) ♦ Flip Side Rotation Specifies the binding of the document when both sides are scanned using ADF.
34 ♦ Rotation Degree Outputs the scanned image rotated to the right or left 90 degrees. 0.0 degree Outputs the scanned image as is. 90.0 degree Outputs the scanned image rotated 90 de grees to the right (clockwise). -90.0 degree Outputs the scanned image rotated 90 degr ees to the left (counterclockwise).
35 selected (Double Letter) paper size range is used for scanning, the output will adjust to the page size detected. (However, in case of fi-4860C/fi-4990C/f i-5650C/fi-5750C, this function is not dep.
36 This option may not be supported for some scanners. See "Relev ant Image Scanner Specification" in the Appendix..
37 4.7.2 Job/Cache Figure Option dialog (Job/Cache) ♦ Caching Specifies whether to pre-read (cache) when a document is scanned. This option enables faster scanning. If processing of the application being used sl ows down and scanning stops, this o ption can be used to prevent degradation of the scanning speed.
38 Use Both Memory Pre-reads using memory of both Scanner a nd PC (displayed only if supported by the scanner). ♦ Batch Detection The application can detect documents on a specific type of form (special paper). The application must support this function.
39 Check length The length of the transmitted document is checked by the sensor in the device. A multifeed is detected by detecting changes in the length when more than one document is sent. Check thickness and length The thickness and length of the tran smitted document are checked.
40 ♦ Check Over-skew The skew of the transmitted document is supervised during the ADF scanning. When an over-skew is detected, the scanner is stopped and an error message is displayed. * The image data of the sk ewed document is deleted. * This functions, only when “Multifeed Detection” is enabled.
41 <If blank page skip does not operate properly> − If a blank page is scanned, increase the value set. − If scanning is skipped up to the require d document, decrease the value set. * When “Black Background” is selected in [Automatic Size and Skew detection], the Blank page skip may not operate properly.
42 4.7.3 Generic Figure Option dialog (Generic) ♦ Unit/Scaling This option selects the unit for the scanning area and preview window. One inch is calculated as 25.4 millimeters. When inches are converted to millimeters, values are rounded off. Note.
43 4.7.4 Imprinter (Endorser) Figure Option dialog (Imprinter) ♦ Enable Imprinter (Endorser) Specifies enabling or disabling the imprinter function of the device. When the option is selected, the scanned documents are imprinted according to the instructions below.
44 Post-Imprinter (Printing after scanning, and on the back side of documents) Prints on documents using the imprinter in stalled in rear part of the scanner. In this case, it prints on the back side of documents after scanning. Therefore, the printing is not included in a scanning result.
45 ♦ Initial Value (Counter) Designates the initial count when the Imprinter St ring is set, including a counter value. See the "Relevant Image Scanner Specification" described in the Appendix since the programmable values range depends on the device.
46 %MM: The month is printed in two digits; for example, 01 for January and 12 for December. %M: The month is printed using one or two di gits; for example, 1 for January and 12 for December. %DD: The day is printed using two digits; for example, 03 fo r the 3rd day of the month and 26 for the 26th day of t he month.
47 4.7.5 Start Up Set up the Power Mode, Low-Speed Feed ing and Scanner Operation Panel. In some scanner models, displayed dialog bo x or setup item may be different or even [Startup] dialog box may not be displayed.
48 In case of model fi-5750C In case of model fi-5650C Figure Option dialog (Start Up).
49 In case of model fi-5900C Figure Option dialog (Start Up) ♦ Power Mode Quick Start Mode This mode keeps the lamp on regardless th e scanner’s operating condition, which saves times for lamp to become steady. Low Power Mode To save the power consumption, this mode turns the lamp off, if the scanner is not operated for 14 minutes.
50 When checking this check box, scanning speed becomes faster, but image quality is slightly deteriorated. Check this check box, when giving prior ity to scanning speed over image quality. ♦ Scanner Operation Panel − Enable Scanner Panel This is to specify whether the operator panel is enabled or not.
51 − Enable [Send to] button Specifies whether the preview is started by pressing the [Send to] button on t he device. − Enable FB Scanning Start Specifies whether Scanning is starte d by closing the Flat bed cover. When setting the document on the Flat bed a nd closing the Flat bed cover, scanning starts.
52 4.7.6 Filter Set the filter processing in this dialog. The filter name is displayed in the list box. While checking the checkbox in the left of the filter name, the filter processing is applied to scanned image. When selecting a filter name and clicking [Prope rty] button, the setting dialog of the filter is displayed.
53 ♦ Page Edge Filler Eliminates the blemish around the paper edge s by covering the area in (Black or White) color. Color Select a color to paint over the image frame. Can select "White" or "Black". Please specify either white or black to ma tch the background color of the document.
54 ♦ Digital Endorser Character string, such as the alphabet and number, is added on the data of the scanned image. By using this filter, you can attach a name, a date, a time or a serial number on the scanned images and manage them. Printing Specify the beginning position of the character string to out put on the scanned image data.
55 Symbols : !”#$%&’()*+,-./:;<=>?@[]^_`{|}~ Other : ( S p a c e ) (*The space is ignored when it is en tered at the head of [String:].) The following definitions can be used. Th ey may also be selected from the menu, which is displayed by clicking on " ".
56 4.7.7 Compression Click this tab and mark the check box to en able or disable JPEG compression for data transfer from the image scanner. (This functi on is available only for Color or Grayscale scans.) Figure Option dialog (Compression) ♦ Imprinter String (Endorser) Converts scanned image data into JPEG format for transfer.
57 4.8 Setting Advance Options The "advance dialog" is used to set items relate d to image processing. The settings apply to device-specific functions and items that differ according to whether the scanner used supports them.
58 The options are described below: 4.8.1 Gray Figure Advance dialog (Gray) ♦ Gamma Pattern This option corrects distortions from nonlinear image representation. Scanner sensors are generally designed to generate output linear to the density of the light reflected from the document.
59 Select the gamma pattern download file to be us ed from the list of file names. Then, press the [OK] button. Correction will then be ex ecuted using the selected gamma pattern. If the gamma pattern download file has not been re gistered in the list of file names, use the [Add] button to register the file.
60 Original Image A color sample will be shown. The dropout co lor can be selected by clicking the desired color with your mouse. Dropout Image An image without the dropout color will be shown. Dropout Color Both the color values and the color will be shown.
61 [File] button Displays arbitrary image files (*.b mp format) on the “Original Image”. [Apply] button Reflects the contents that have been set and closes the window. [Cancel] button Discards the contents that have been set and closes the window.
62 4.8.2 Image Filter Figure Advance dialog (Image Filter) ♦ Edge Processing This option specifies the sharpness of a scanned image. Select "None", "Edge Extract", or "Smoothing (Background Removal)". None Edge processing is not performed.
63 Emphasis This option outputs an image with the edge emphasized. "Emphasis High", "Emphasis Mid", or "Emphasis Low" can be selected. If "Emphasis High" is selected, the image becomes sharper. If "Emphasis Low" is selected, the image appears less distinct.
64 4.8.3 DTC This option is valid only when "DTC Variance" is set. Figure Advance dialog (DTC Mode) ♦ Scan mode This option selects one of the following two scan modes: [for OCR]: This mode is for text recognition app lications where irregularity in the image is undesirable.
65 ♦ Threshold Curve This option specifies the relationship between the threshold value and the maximum density. The specification method depends on the [Scan mode] setting. In [for OCR] mode, use the scroll bar to set th e inclination and density level between 0 and 5.
66 ♦ OCR Smoothing/ Background Removal The OCR smoothing is the function to make sm ooth the notched part of line-drawing, and the Background Removal is the functio n to remove the uneven background.
67 4.8.4 When Color (/Grayscale) is specified For color scanners, when “Color” is selected in the [Image Mode], the [Advance] dialog changes as follows. And in case of some colo r scanners, when selecting “Grayscale” the [Advance] dialog change as sa me as selecting “Color”.
68 ♦ Contrast/Brightness (Color / Grayscale) Contrast : Sets the contrast of light and sh adow in a scanned image. Specify the contrast with a number in the range of 1 (low [soft]) to 255 (high [sharp]). If this value is increased, the dark part of the image is shown darker and the light part is shown lighter.
69 When "Download Pattern" is select ed, the above dialog box opens. Select the gamma pattern download file to be us ed from the list of file names. Then, press the [OK] button. Correction will then be ex ecuted using the selected gamma pattern.
70 <Image Mode : C olor selected> <Image Mode : G rayscale se lected> Figure Advance dialog ([Quality] / [Gray] tab) ♦ Image Emphasis (Color only) This option specifies the sharpness of a scanned image. Select "None", "De-Screen" or "Emphasis".
71 ♦ White Level Follower (Color) Select this option to scan a document whos e background color is not white, such as a newspaper. Select "Auto", "Enable", or "Disable". When "Enable" is selected, the document is scanned using background follow-up (for line drawings).
72 Original Image A color sample will be shown. The dropout co lor can be selected by clicking the desired color with your mouse. Dropout Image An image without the dropout color will be shown. Dropout Color Both the color values and the color will be shown.
73 [File] button Displays arbitrary image files (*.b mp format) on the “Original Image”. [Apply] button Reflects the contents that have been set and closes the window. [Cancel] button Discards the contents that have been set and closes the window.
74 4.9 Setting the Setting Manager Options These options are used to manage the setting files, and switch the basic scan dialog display. Press the [Config.
75 ♦ FTS File Information The information of the setting file select ed in [Setting Files] is displayed. ♦ [Show this dialog next open] checkbox If this checkbox is checked, [Basic Scan Dialog] will be activated the next time the driver is activated.
76 ♦ [Delete] button Deletes unnecessary setting files. Select the setting file to be deleted and th en press the [Delete] button. A confirmation dialog will be displayed. Press the [OK] butto n to delete the setting file. To cancel, press the [Cancel] button.
77 4.10 Basic Scan Dialog The basic scan dialog contains only the minimum functions required for scanning. The detailed setting functions of the main dialog have been omitted.
78 ♦ FTS File Information The contents of the selected file are displayed. ♦ [Scan] button Executes scanning based on the contents of the setting file. ♦ [OK] button Terminates without performing the scan operation. ♦ [Adjust] button Switches from the basic scan dialog to the main dialog.
79 4.11 Download Pattern File The "download pattern file" of this driver is a file that defines the patterns to be used by the scanner to execute various image processing. This file is available in the following two versions. Each version can be selected using the [D ownload Selection Dialog] that opens when [Download] is selected.
80 Example: In case of 8x8 matrix 8, 8, 128, 128, 128, 128 , 128, 128, 128, 128, 255, 128, 128, 128 , 128, 128, 128, 128, 255, 255, 128, 128 , 128, 128, 128, 128, 255, 255, 255, 128 , 128, 128, 128, 1.
81 ♦ Gamma download pattern file Any user defined gamma correction proce ssing can be performed by downloading the pattern from the gamma download file to th e scanner. The defined pattern becomes effective when [Download Pattern] is selected for [Gamma Pattern].
82 Example 256, 256, 255, 254, 253, 252 , 251, 250, 249, 248, 247, 246, 245, 244, 243, 242, 241, 240, 239 , 238, 237, 236, 235, 234, 233, 232, 231, 230, 229, 228, 227, 226 , 225, 224, 223, 222, 221, 2.
83 5. Using the Gamma Pattern Editor 5.1 Start-up Click on [Start] and select [Gamma Patter n Editor] from "Scanner Utility for Microsoft Windows" under [Programs].
84 5.2 [File] menu ♦ [Load...] This menu is used to read the Gamma Download file and display the graph and gradations. The name of the open file is displayed above the graph area. ♦ [Save] The gamma pattern currently being edited is saved in the file whose name is displayed above the graph area.
85 5.4 Gamma Pattern Editing ♦ Graph Area The graph area is a 256-dot x 256-dot white square area bordered by black lines, where the relationship between the input values of 0 to 2 55 ( x axis) and output values of 0 to 255 (y axis) is indicated in blue lines.
86 6. Definition of Scanner and Camera Properties 6.1 Displaying Scanner and Camera Properties Double-click the [Scanner a nd Camera] icon on the [Control Panel] to display the corresponding Properties dialog box. If the scanner driver has been properly installed, the icon of your scanner is displayed.
87 6.3 Events Tab On the Events tab, an application can be sp ecified to be started automatically by “Scanner events” such as “pushing buttons on the scanner”. (The Events tab is not displayed if the device does not support this function.) ♦ Scanner events Select a “scanner event” from the list box to st art an application.
88 In Windows ® XP or Windows Server TM 2003, the following “Events” screen may be displayed. (*This screen has the same function as the above screen.) ♦ Select an event Select a “scanner event” from the list box to st art an application. Please select the item to set up from the following events.
89 6.4 Diagnostic Tab To perform more detailed diagnostic tests than those provided in the general tab folder, click the [Diagnose] button. In Windows ® 2000, Window s ® XP or Windows Server TM 2003, only a user who has administrator authority can run these tests.
90 6.5 Device Information Tab A list of the functions compatible with the sel ected scanner driver is displayed. The items displayed depend on the selected model of scanner. Only hardware functions are displayed. The functions realized by software are not displaye d in this tab fol der.
91 6.6 Device Set up Tab Information related to the operation and maintenance of the scanner driver can be displayed and set up. For some scanner models , this tab may not be displayed, o r some items cannot be set up (grayed out). Changing the setup activates the A pply button.
92 When using a scanner, the follo wing message may be displayed. If this message appears, replace consumab les following the instructions below. < If replacing consumables immediately > 1. Check [This message not display again.] 2. In cases where consumables are replaced after completing all documents being scanned, click [Ignore].
93 [Power saving mode] button This specifies the power saving mode. If this button is clicked, the fo llowing dialog box is di splayed. − Quick Start Mode This mode keeps the lamp on regardless the scanner’s operating condition, which saves times for lamp to become steady.
94 Enable (Detection Area Selection) Vertically select an area where multifee d detection will or w ill not be conducted. Choose either “Select area for applying Mu ltifeed Detection” or “Select area for not applying Multifeed Detction”. − Select area for applying Multifeed De tection Select an area for multifeed detection.
95 [Offset] button When this button is clicked, the fo llowing dialog box is displayed. Using this dialog box, the offset of the leading edge and magnification for the sub- scanning direction can be changed. − Offset Setting: If the position of the scanned image shifts fro m the original document, fine adjustment is possible.
96 − [OK] button The adjusted value is written to the EEPROM. * This button may not be displaye d dep ending on the scanner model. The available settings also vary depending on the scanner model. (e.g. For fi-4110CU, only the setting of the ADF part can be changed) Changing this setting affects scanning oper ation of the scanner device greatly.
97 6.7 About Tab The version of this driver and a link to the Fujitsu home page are displayed. 6.8 Color Management Tab Color profiles assigned to the device can be added or deleted from this folder. "sRGB Color Space Profile.icm" is the defa ult driver assigned to this driver.
98 6.9 Scanning by using “Scanner and Camera Wizard” In case of Windows XP or Windows Server TM 2003, you can scan by using “Scanner and Camera Wizard”. (* It functions w hen scanning with supported scanner. ) Follow below procedure to scan: 1.
99 5. Specify a file name, a format and a place to save scanned images. And click [Next] button. Scanning starts. (The following win dow is displayed during scanning.) 6. Select an item of “What do you want to do?” to keep working with your picture.
100 8. Click [Finish] button to finish this wizard..
101 7. Troubleshooting 7.1 Error Messages 7.1.1 Messages from the TWAIN Driver • The input value is outside the range. Cause: A value exceeding the range allowed for an input item was input. User response: Input a value inside the allo wed range. Refer to the input item or the image scanner specification for the range.
102 • The value for custom paper is higher than th e maximum scan size. Width needs to equal 279 mm or less and length needs to equal 420 mm or less. • The value for custom paper is higher than th e maximum scan size. Width needs to equal 11 inch or less and length needs to equal 16.
103 • Cannot specify Individual Setting with Gray Scale. • Cannot specify Long Page Scan with Gray Scale. Cause: Gray Scale and Individual Setting are specified at the same time. Gray Scale and Long Page Scanning are specified at the same time. User response: Uncheck Individual Setting when specifying Gray Scale.
104 • Specified string is too long. Cause: The specified string is too long. Up to 128 en-size characters and up to 64 em-size characters can be specified. User response: User response: Reduce the number of characters in the string so that they do not exceed 128 en-size characters.
105 User response: 1. Check the power supply of the scanner or connection with PC. 2. Close other application or “Scanner and Camera” in [Control Panel] • An input-output error occurred in the image scanner. Cause: A fault occurred during the scan operation of the image scanner.
106 • Insufficient buffer memory size of scan ner de vice for current scanning parameters. Please reduce the scanning area or the resolution, or install additional memory in the scanner. Cause: A memory option has not been installed in the image scanner.
107 • Ink cartridge is not installed in the imprinte r properly. Please check the installation and try again. Cause: The imprinter (Endorser) has no ink cartridge or the ink cartridge may be mounted improperly. User response: Check that the ink cartridge of the imprinter is mounted properly and scan again.
108 • An error occurred in the temporary file. Cause: Accessing the internal temporary file of the scanned image is causing the error. The disk space may be in sufficient, the temporary file may be damaged, or other programs may be affecting disk access.
109 • A parameter error has occurred (internally) • The calling procedure is invalid (internally). • The area is specified incorrectly (internally). • The calculation result exceeded the value that can be expressed (internally). • User definition is not registered (internally).
110 • An undefined error occurred • Processing cannot be continued because of insufficient memory. • The data source cannot be found. • The driver is connected to a maximum number of applications supported. • An operation error occurred. • An invalid function is specified.
111 7.1.2 Error messages relating to gamma correction pattern editing • Enter a positive decimal value. Cause: A value other than a number has been entered as the gamma correction value. Alternatively, 0 or a negative value has been entered. User response: Reenter a valid value.
112 7.2 Device Trouble Related to Operation • The [Scan] button is pressed, but scanning is not performed. Cause: Has the scanner power been tu rned on? Has the SCSI cable been connected correctly? Has the correct device type been selected using [Select TWAIN Input Device]? • The scanner appears to be operati ng, but no image is displayed.
113 7.3 Device Trouble Related to Installation • Can not install the driver . (The installation is stopped on the way.) Cause: Is the older version FUJITSU TWAIN driver .installed in your PC? User response: Please install the driver after uninstalling the old versions.
114 8. Appendix 8.1 Relevant Image Scanner Speci fication Product: fi-4010CU Type: Desktop Image sensor: Reduced optical system Operating method: Document fixed Flat bed, Automatic Document Feed (ADF).
115 Individual setting: Disabled Interface: USB 1.1 Preview: Enabled (at Flat bed scanning only) Flip Side Rotation: Disabled Rotation: Enabled Automatic Size and Skew detection: Disabled Overscan: Di.
116 Product: M3091DC (fi-4110C) Type: Desktop Image sensor: Reduced optical system Operating method: Automatic Document Fe ed (ADF), Simultaneous double-sided scanning Light source: Fluorescent tube (.
117 Interface: SCSI-II Preview: Enabled (at ADF scanning) Flip Side Rotation: Enabled Rotation: Enabled Automatic Size and Skew detection: Disabled Overscan: Disabled Buffer scan ([Use Memory on Scann.
118 Product: fi-4110CU Type: Desktop Image sensor: Reduced optical system Operating method: Automatic Document Fe ed (ADF), Simultaneous double-sided scanning Light source: Fluorescent tube (White) Ba.
119 Interface: USB 1.1 Preview: Enabled (ADF scanning) Flip Side Rotation: Enabled Rotation: Enabled Automatic Size and Skew detection: Disabled Overscan: Disabled Buffer scan ([Use Memory on Scanner].
120 Product: fi-4120C Type: Desktop Image sensor: Color CCD (Reduced optical system) Operating method: Automatic Document Fe ed (ADF), Simultaneous double-sided scanning 1 , Long page scanning Black&a.
121 Gamma pattern: Internal types are not available. (Cannot be downloaded) At custom specification, entering a value enables to set a pattern. Image processing function: Simplified Dynamic Threshold (SDTC), De-Screen, Edge emphasis, 256 Color, 8 Color Individual setting: Disabled Interface: SCSI-II, USB1.
122 Product: fi-4120C2 Type: Desktop Image sensor: Color CCD (Reduced optical system) Operating method: Automatic Document Fe ed (ADF), Simultaneous double-sided scanning 1 , Long page scanning : Max .
123 Individual setting: Disabled Imprinter (Endorser): With Imprinter option (Reverse side, minimum left margin printing position of 5mm) 1 Maximum number of characters to be printed: 40 characters Co.
124 Product: M3092DC (fi-4210C) Type: Desktop Image sensor: Reduced optical system Operating method: Document fixed Flat bed (FB), Automatic Document Feed (ADF), Simultaneous double-sided scanning Lig.
125 Interface: SCSI-II Preview: Enabled (at Flat bed scanning, ADF scanning) Flip Side Rotation: Enabled Rotation: Enabled Automatic Size and Skew detection: Disabled Overscan: Disabled Buffer scan ([.
126 Product: fi-4220C Type: Desktop Image sensor: Color CCD (Reduced optical system) Operating method: Document fixed Flat bed (FB), Automatic Document Feed (ADF), Simultaneous double-sided scanning 1.
127 High light / Shadow : 255 steps (at Color / Grayscale scanning) Gamma pattern: Internal types are not available. (Cannot be downloaded) At custom specification, entering a value enables to set a pattern.
128 Product: fi-4220C2 Type: Desktop Image sensor: Color CCD (Reduced optical system) Operating method: Document fixed Flat bed (FB), Automatic Document Feed (ADF), Simultaneous double-sided scanning .
129 Gamma pattern: Internal types are not available. (Cannot be downloaded) At custom specification, entering a value enables to set a pattern. Image processing function: Simplified Dynamic Threshold (SDTC), De-Screen, Edge emphasis, 256 Color, 8 Color, 4bit Grayscale Individual setting: Disabled Interface: SCSI-II, USB1.
130 Product: M3093GX 1 (device name: fi-4320S, VS P210) Type: Desktop Image sensor: Reduced optical system Operating method: Document fixed, scanner unit moving (flat bed), Automatic Document Feeder (.
131 Buffer scan ([Use Memory on Scanner]) function: Disabled Use Both Memory ( [Ram Cache]+[Use Memory on Scanner] ) function: Disabled Batch Detection: Enabled Multifeed detection: Disabled Pre-Pick:.
132 Product: M3093DG (fi-4320, VSP2 20) Type: Desktop Image sensor: Reduced optical system Operating method: Document fixed, scanner unit moving (flat bed) Automatic Document Feeder (ADF) Simultaneous.
133 Rotation: Enabled Automatic Size and Skew detec tion: End of Page Detection Overscan: Disabled Buffer scan ([Use Memory on Scanner]) function: Disabled Use Both Memory ( [Ram Cache]+[Use Memory on.
134 Product: fi-4340C Type: Desktop Image sensor: Color CCD, Reduced optical system Operating method: Document fixed Flat bed, Automatic Document Feed(ADF), Simultaneous double-sided scanning Long pag.
135 Image processing function: Simplified Dyna mic Threshold (SDTC), Edge emphasis, Edge extraction, De-Screen, SEE(Selectable Edge Enhancement), Reverse image, 256 Color, 8 Color With image processin.
136 Product: fi-4530C Type: Desktop Image sensor: Color CCD Operating method: Automatic Document Feed (ADF), Simultaneous double-sided scanning, Long page scanning (Resolution free) Black&White : .
137 Image processing function: Simplified Dynamic Threshold (SDTC) Edge emphasis, Edge extraction, De-screen, 256 color, 8 color, Reverse image Individual setting: Disabled Imprinter (Endorser): With .
138 Product: M3096GX 1 (fi-4620S, VSP310) Type: Desktop Image sensor: Reduced optical system Operating method: Document fixed, scanner unit moving (flat bed), Automatic Document Feed (ADF) Light sourc.
139 Overscan: Disabled Buffer scan ([Use Memory on Scanner]) function: Disabled Use Both Memory ( [Ram Cache]+[Use Memory on Scanner] ) function: Disabled Batch Detection: Enabled Multifeed detection:.
140 Product: fi-4640S Type: Desktop Image sensor: Reduced optical system Operating method: Document fixed Flat bed, Automatic Document Feed(ADF) Long page scanning (297mm x 1387mm, Black&White onl.
141 Individual setting: Disabled Imprinter (Endorser): With imprinter option (Reverse side, minimum left margin printing position of 42 mm) 1 Maximum number of characters to be printed: 40 characters .
142 Product: M4097D (fi-4750 , VSP330) Type: Desktop Image sensor: Reduced optical system Operating method: Document fixed Flat bed, Automatic Document Feed(ADF), Simultaneous double-sided scanning Lo.
143 Imprinter (Endorser): With imprinter option (Reverse side, minimum left margin printing position of 42 mm) 1 Maximum number of characters to be printed: 40 characters Counter display range: 0 to 9.
144 Product: fi-4750L Type: Desktop Image sensor: Reduced optical system Operating method: Document fixed Flat bed, Automatic Document Feed(ADF), Simultaneous double-sided scanning Long page scanning .
145 Imprinter (Endorser): With imprinter option (Reverse side, minimum left margin printing position of 42 mm) 1 Maximum number of characters to be printed: 40 characters Counter display range: 0 to 9.
146 Product: fi-4750C Type: Desktop Image sensor: LED(RGB) + Reduced optical system Operating method: Document fixed Flat bed, Automatic Document Feed(ADF), Simultaneous double-sided scanning Long pag.
147 Image processing function: Simplified Dyna mic Threshold (SDTC), Edge emphasis, Edge extraction, De-Screen, SEE(Selectable Edge Enhancement), Reverse image, 256 Color, 8 Color With image processin.
148 Product: M3097G 1 Type: Desktop Image sensor: Reduced optical system Operating method: Document fixed, scanner unit moving (flat bed), Automatic Document Feed (ADF) Light source: Fluorescent tube .
149 Automatic Size and Skew detection: Disabled Overscan: Disabled Buffer scan ([Use Memory on Scanner]) function: Disabled Use Both Memory ( [Ram Cache]+[Use Memory on Scanner] ) function: Disabled B.
150 Product: M3097DG Type: Desktop Image sensor: Reduced optical system Operating method: Document fixed, scanner unit moving (flat bed), Automatic Document Feed (ADF) Simultaneous double-sided scanni.
151 Rotation: Enabled Automatic Size and Skew detec tion: End of Page Detection Overscan: Disabled Buffer scan ([Use Memory on Scanner]) function: Disabled Use Both Memory ( [Ram Cache]+[Use Memory on.
152 Product: fi-4860C Type: Desktop Image sensor: Reduced optical system Operating method: Automatic Document Feed (ADF), Simultaneous double-sided scanning, Long page scanning (297mm x 878mm, Black&a.
153 Image processing function: Dynamic Threshold (SDTC, DTC), Edge emphasis, Edge extraction, Automatic separation, Mirror image(Black&White only), Reve rse image, 256 Color, 8 Color Individual se.
154 Product: M4099D (fi-4990) Type: Desktop Image sensor: Reduced optical system Operating method: Automatic Document Feed (ADF), Simultaneous double-sided scanning, Long page scanning (297mm x 878mm,.
155 Individual setting: Enabled (Brightness / Threshold / Contrast / Gamma pattern / Image processing function) Imprinter (Endorser): With endorser option (Reverse side, minimum left margin printing p.
156 Product: fi-4990C Type: Desktop Image sensor: Reduced optical system Operating method: Automatic Document Feed (ADF), Simultaneous double-sided scanning, Long page scanning (297mm x 878mm, Black&a.
157 Individual setting: Enabled (Brightness / Threshold / Contrast / High light / Shadow / Gamma pattern / Image processing function) Imprinter (Endorser): With endorser option (Reverse side, minimum .
158 Product: M3099G, M3099GX Type: Desktop Image sensor: Reduced optical system Operating method: Automatic Document Fe ed (ADF), Simultaneous double-sided scanning Light source: Fluorescent tube (Gre.
159 image, Reverse image, Dynamic Threshold (DTC), Smoothing, Filtering, Noise removal Individual setting: Enabled (Brightness / Threshold / Contrast / Gamma pattern / Image processing function) Impri.
160 Product: M3099GH Type: Desktop Image sensor: Reduced optical system Operating method: Automatic Document Fe ed (ADF), Simultaneous double-sided scanning Light source: Fluorescent tube (Green) Basi.
161 Imprinter (Endorser): With imprinter (endorser) option (Reverse side, minimum left margin printing position of 20 mm) 1 Maximum number of characters to be printed: 20 characters Counter display ra.
162 Product: fi-5110C Type: Desktop Image sensor: Color CCD (Reduced optical system) Operating method: Automatic Document Fe ed (ADF), Simultaneous double-sided scanning 1 , Long page scanning: Max 21.
163 Individual setting: Disabled Interface: USB2.0 Preview: Enabled Flip Side Rotation: Enabled Rotation: Enabled Automatic Size and Skew detection: En d of Page Detection, White Background Overscan: .
164 Product: fi-5120C Type: Desktop Image sensor: Color CCD (Reduced optical system) Operating method: Automatic Document Fe ed (ADF), Simultaneous double-sided scanning, Long page scanning : Max 216m.
165 Individual setting: Enabled (Brightness / Threshold / Contrast / High light / Shadow / Gamma pattern) Imprinter (Endorser): With Imprinte r option (Reverse side, minimum left margin printing posit.
166 Product: fi-5220C Type: Desktop Image sensor: Color CCD (Reduced optical system) Operating method: Document fixed Flat bed (FB), Automatic Document Feed (ADF), Simultaneous double-sided scanning, .
167 Image processing function: Simplified Dynamic Threshold (SDTC), De-Screen, Edge emphasis, 256 Color, 8 Color, 4bit Grayscale Individual setting: Enabled (Brightness / Threshold / Contrast / High light / Shadow / Gamma pattern) Interface: SCSI-II, USB1.
168 Product: fi-5530C Type: Desktop Image sensor: Color CCD Operating method: Automatic Document Feed (ADF), Simultaneous double-sided scanning, Long page scanning (Resolution free) Black&White : .
169 Image processing function: Simplified Dyna mic Threshold (SDTC), Advanced DTC, Edge emphasis, Edge extraction, De-screen, 256 color, 8 color, Reverse image Individual setting: Enabled (Brightness .
170 Product: fi-5650C Type: Desktop Image sensor: Color CCD + Reduced optical system Operating method: Document fixed Fl at bed(FB), Automatic Document Feed(ADF), Simultaneous double-sided scanning Lo.
171 Image processing function: Simplified Dyna mic Threshold (SDTC), Edge emphasis, Edge extraction, De-Screen, SEE(Selectable Edge Enhancement), Reverse image(at Black & White, Grayscale), 256 Co.
172 Product: fi-5750C Type: Desktop Image sensor: Color CCD + Reduced optical system Operating method: Document fixed Fl at bed(FB), Automatic Document Feed(ADF), Simultaneous double-sided scanning Lo.
173 Image processing function: Simplified Dyna mic Threshold (SDTC), Edge emphasis, Edge extraction, De-Screen, SEE(Selectable Edge Enhancement), Reverse image(at Black & White, Grayscale), 256 Co.
174 Product: fi-5900C Type: Desktop Image sensor: Reduced optical system Operating method: Automatic Document Feed (ADF), Simultaneous double-sided scanning, Long page scanning (305mm x 878mm) Light s.
175 Edge Enhancement), Mirror imag e(Black&White only), Reverse image, 256 Color, 8 Color Individual setting: Enabled (Image Mode / Brightness / Threshold / Contrast / High light / Shadow / Gamma .
176 Operator Panel setting: [Scan] / [Send to] button Prefer Scanning Speed setting: Enabled Device set: Consumables replace (Pad / Pick Roller / Break Roller / Separator Roller / Remaining Ink counte.
177 Product: fi-60F Type: Desktop Image sensor: LED(RGB) + Reduced optical system Operating method: Document fixed Flat bed(FB) Light source: LED (R, G, B) Basic resolution: 600 dpi Output resolution:.
178 JPEG Transfer (Hardware Compression) : Disabled Filter: Page Edge Filler, Digital Endorser Drop out color: Enabled sRGB output : Enabled Use Image Processing Software Option: Enabled <Other fun.
179 8.2 Maintenance Service This section explains briefly how you can help us to provide you wi th high-quality maintenance service. Since it is practically impossible for the Fujitsu service staff to.
FUJITSU TWAIN32 Scanner Driver / Utility “Scanner Utility for Microsoft ® Windows ® ” Users Guide 32 bit version First Edition February 2006 2nd Edition March 2006 3rd Edition June 2006 4th Edition June 2006 All Rights Reserved, Copyright © PFU LIMITED 2006 The contents of this document may ch ange for improvements without prior notice.
デバイスFujitsu P3PC-1492-04ENC2の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Fujitsu P3PC-1492-04ENC2をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはFujitsu P3PC-1492-04ENC2の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Fujitsu P3PC-1492-04ENC2の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Fujitsu P3PC-1492-04ENC2で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Fujitsu P3PC-1492-04ENC2を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はFujitsu P3PC-1492-04ENC2の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Fujitsu P3PC-1492-04ENC2に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちFujitsu P3PC-1492-04ENC2デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。