FujitsuメーカーPDS5004Wの使用説明書/サービス説明書
ページ先へ移動 of 50
Before using the display , read this manual carefully so that you know how to use the display cor rectly . Refer to this manual whenever questions or problems about operation arise. Be sure to read and observe the safety precautions. Keep this manual where the user can see it easily .
DECLARA TION OF CONFORMITY according to EN45014 We Fujitsu General (U.K.) Co. Limited of Unit 150, Centennial P ark, Centennial A venue Elstree, Hertfordshire, WD6 3SG Manufacturer: Shinjyo Fujitsu Ge.
DECLARA TION OF CONFORMITY according to EN45014 We Fujitsu General (U.K.) Co. Limited of Unit 150, Centennial Park, Centennial A venue Elstree, Hertfordshire, WD6 3SG Manufacturer: Shinjyo Fujitsu Gen.
DECLARA TION OF CONFORMITY according to EN45014 We Fujitsu General (U.K.) Co. Limited of Unit 150, Centennial Park, Centennial A venue Elstree, Hertfordshire, WD6 3SG Manufacturer: Shinjyo Fujitsu Gen.
E-2 SAFET Y PRECA UTIONS FCC NO TICE • PDS5003W/PDS5003U/PDS6101W : A Class A digital device This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to P art 15 of the FCC Rules.
E-3 – Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. The product should be mounted according to the manufacturer ’ s instructions, and should use a mount recommended by the manufacturer .
E-4 FEA TURES This display uses a plasma display panel and is only 9.8 cm (50 ” ) /11.8 cm (61 ” ) deep. With its high picture quality and performance, it is perfectly suited for multimedia applications.
E-5 ACCESSORIES Infor mation Cables for connecting the display to external equipment are not supplied. Contact your dealer for more information on these products.
E-6 INS T ALLA TION T o prev ent the display ’ s internal components from ov erheating, make sure that the display is installed in a well-ventilated location. Be sure to use the optional desktop stand, ceiling-mounting unit, wall-mounting unit and other unit when installing this display .
E-7 PAR T NAMES AND FUNCTIONS Fr ont (both 50" and 61") 1 P ower indicat or lamp This lamp shows the state of the po wer supply . Lit (red): Po wer OFF (stand-by) Lit (green): Po wer ON Lit (orange): Po wer saving (DPMS: Po wer saving function) mode ON Flashing (red): Malfunction (Flashes dif ferently depending on the type of malfunction.
E-8 1 OFF/STD-B Y switch OFF : The po wer indicator lamp goes off, and the power can ’ t be turned on by the power button. The power is partly supplied. STD-BY :The power indicator lamp lights red, and the po wer can be turned on or off by the po wer button.
E-9 9 Sound 1 input ter minal (A UDIO 1 INPUT) Connect this terminal to the sound output terminal of your VCR, etc. (See P .E-37 for the selection of audio input for video input.
E-10 Descr iption of Input T erminals DVI-D terminal (RGB 1 INPUT/D VI-D) Pin No. Input signal Pin No. Input signal 1R e d 9 — 2 Green 1 0 Ground 3 Blue 1 1 — 4 — 12 — 5 Ground 13 Horiz ontal sync hronization 6 Ground 1 4 V ertical sync hronization 7 Ground 15 — 8 Ground Frame Ground RGB2 input terminal (RGB2 INPUT/mD-sub) Pin No.
E-11 1 P ower ON but ton [PO WER ON] ➝ (See P . E-16.) 2 P ower OFF but ton [POWER OFF] ➝ (See P . E-16.) 3 RGB input mode select or but ton [RGB] ➝ (See P . E-1 7 .) 4 V ideo input mode selector but ton [VIDEO] ➝ (See P . E-1 7 .) 5 Wide scr een selector but ton [WIDE] ➝ (See P .
E-12 PRECA UTIONS T o prev ent malfunction, be sure not to apply any form of sev ere shock to the remote control. T o prev ent malfunction or deformation, be sure not to allow the remote control to become wet; also, keep it a way from hot locations or heating equipment.
E-13 Be sure to turn OFF the po wer to the display and external equipment before making an y connections. No cables are supplied with the display for connection to external equipment. The type of cable to be used varies depending on the PC model. Contact your dealer for more information.
E-14 PO WER INPUT COMPONENT VIDEO INPUT (color dif ference input) / RGB3 INPUT RGB1 INPUT (DVI-D) RGB2 INPUT (mD-sub) A UDIO2 INPUT VIDEO INPUT S-VIDEO INPUT AUDIO1 INPUT RS-232C T o RS-232C output te.
E-15 PO WER INPUT COMPONENT VIDEO INPUT (color difference input) / RGB3 INPUT RGB1 INPUT (DVI-D) RGB2 INPUT (mD-sub) AUDIO2 INPUT VIDEO INPUT S-VIDEO INPUT AUDIO1 INPUT RS-232C T o RS-232C output term.
E-16 Select the OFF/STD-B Y switch at the STD-B Y of the displa y . When you do so, the power indicator lamp turns red. (This applies only to 50 ” displa y .) Pr ess on the r emote contr ol. When you do so, the power indicator lamp turns green. Pr ess or t o select a desir ed input mode.
E-17 SELECTING INPUT MODE Pr ess t o select a desir ed input mode. Each time you press , a different input mode appears. The sequence is as follo ws: V ideo: Displays pictures from equipment connected to the V ideo terminal. S-video: Displays pictures from equipment connected to the S-video terminal.
E-18 WA TCHING PICTURES ON THE WIDE SCREEN Note • Displaying a picture in a Normal mode for extended periods of time may cause phosphor b urn-in. • A variety of picture modes are a vailable with this display .
E-19 Infor mation Y ou may find dark areas on top and at the bottom of the screen if you select one of the Zoom modes for media while using the V ista V ision or Cinema V ision size i.e., the sizes used frequently for picture software. Nor mal Displays pictures of normal size (i.
E-20 SELECTING OPTIONS IN A MENU Use the [MODE] button on the display or and on the remote control to select a desired input mode. Pr ess . The main menu screen will appear . Pr ess or to switc h between sub-menus. Each time you press or , one of the available menus appears.
E-21 : Increases width. : Reduces width. : Increases height. : Reduces height. Option (1) Contrast (2) Brightness (3) Color (4) T int (5) Sharpness (6) Picture Mode (7) Color T emp. (8) User Color T emp. (9) Noise Reduction (for V ideo, S-video, Comp.
E-22 Operation : Stronger treble : W eaker treble : Stronger bass : W eaker bass : Higher volume from right- hand speaker : Higher volume from left- hand speaker Use or for switching.
E-23 Option (1) 24 Frame Mode (for V ideo, S-video, Comp.video) (2) 3D Y/C (for V ideo(3.58NTSC)) Function Displays the optimum movie pictures. Selects whether to enable the 3D Y/C circuit. Operation Use or for switching. Use or for switching. Range/Set ting On (Movie) / Of f (Normal) On (3D Y/C circuit) / Of f (3-line) Function Menu(See P .
E-24 HO W T O USE MENUS (Continued) Others(1/2) Menu screen Option (1) Picture Memory (2) DPMS (for other than RGB1) (3) Audio Input Function Storing the setting of Picture menu in 8 pattern. Specifies time before DPMS starts. Can specify the background color when specifying time.
E-25 Operation Display the “ Screen Orbiter ” adjustment screen and use or to select an option. Use or to switch between av ailable choices for the selected option. Use or for switching. Use or for switching. Use or for switching. Display Code Setting screen and press or to select an option.
E-26 AD JUS TING PICTURES (PICTURE MENU) Pr ess . The main menu screen will appear . Pr ess or to select “ PICTURE ” . Each time you press or , one of the av ailable menus appears in the following sequence: The PICTURE Menu screen will appear . Pr ess or to select “ Tint ” .
E-27 • Adjusting Contr ast (Contrast) Any v alue between -30 and +30 can be selected. : Higher contrast : Lo wer contrast Press to store. • Adjusting Scr een Brightness (Br ightness) Any v alue between -60 and +60 can be selected. : Brighter screen : Darker screen Press to store.
E-28 AD JUS TING SCREEN POSITION AND SIZE (POSITION/SIZE MENU) Pr ess . The main menu screen will appear . Pr ess or t o select “ POSITION/SIZE ” . Each time you press or , one of the available menus appears in the following sequence: The POSITION/SIZE Menu screen will appear .
E-29 Comp.video mode -16 to +16 -32 to +32 (for1080I,720P) -4 to +4 RGB mode RGB-PC: -150 to +150 RGB-V ideo, Decoder: -16 to +16 -32 to +32 (for1080I,720P) RGB-PC: -25 to +50 RGB-V ideo, Decoder: -4 to +4 * On-screen information disappears if you do not take any action for about 60 seconds.
E-30 AD JUS TING A UDIO (A UDIO MENU) Pr ess . The main menu screen will appear . Pr ess or to select “ A UDIO ” . Each time you press or , one of the av ailable menus appears in the following sequence: The A UDIO Menu screen will appear . Pr ess or to select “Balance ” .
E-31 Adjusting T r eble (T reble) Each audio input Any v alue between -6 and +6 can be selected. : Stronger treble : W eaker treble Adjusting Bass (Bass) Each audio input Any v alue between -6 and +6 can be selected. : Stronger bass : W eaker bass Adjusting V olume Balance (Balance) Each audio input Any v alue between -10 and +10 can be selected.
E-32 OTHER AD JUS TMENTS (FEA TURES MENU) Pr ess . The main menu screen will appear . Pr ess or to select “ FEA TURES ” . Each time you press or , one of the available menus appears in the following sequence: The FEA TURES Menu screen will appear .
E-33 • FEA TURES setup scr een has the following 5 options. Adjustment : Can make a fine adjustment of pictures such as Dot Clock, Clamp Position. Function : Can make a function setting such as 24 Frame Mode, 3D Y/C. (See P . E-34.) On Screen Menu : Can make a display setting such as OSD, Language.
E-34 • Setting Displa y Infor mation (OSD) All modes Y ou can use this option to select whether to display information other than menus. (Error messages are displayed regardless of what choice you make for this option.) Each time you press , one of the av ailable choices appears in the following sequence: On Off On : Displays all information.
E-35 * On-screen information disappears if you do not take any action for about 60 seconds. * The follo wing abbreviations used in this document represent input modes in which you can make adjustments: : V ideo mode, : S-video mode, : Comp.
E-36 OTHER AD JUS TMENTS (FEA TURES MENU)( C ontinued ) INPUT TERMINAL • Selecting D-SUB Input (D-SUB Input) All modes Y ou can use this option to select the signal system it will receive to D-SUB Input terminal. (1) Select D-SUB Input and press . D-SUB Input screen appears.
E-37 * On-screen information disappears if you do not take any action for about 60 seconds. * The follo wing abbreviations used in this document represent input modes in which you can make adjustments: : V ideo mode, : S-video mode, : Comp.
E-38 OTHER AD JUS TMENTS (FEA TURES MENU)( C ontinued ) • Minimizing phosphor bur n-in (Screen Orbiter) Y ou can use this option to move the screen position to minimize phosphor-induced “ b urn-in ” . Follo w the steps below . (1) Select “ Screen Orbiter ” and press .
E-39 * On-screen information disappears if you do not take any action for about 60 seconds. * The follo wing abbreviations used in this document represent input modes in which you can make adjustments: : V ideo mode, : S-video mode, : Comp.video mode, : RGB mode • Assigning Numbers to Displa ys (Monitor No.
E-40 OTHER AD JUS TMENTS (FEA TURES MENU)( C ontinued) * On-screen information disappears if you do not take any action for about 60 seconds. * The follo wing abbre viations used in this document represent input modes in which you can make adjustments: : V ideo mode, : S-video mode, : Comp.
E-41 INITIALIZA TION OF USER AD JUS TMENT V ALUE(F ACT OR Y DEF A UL T) Pr ess . The main menu screen will appear . Pr ess or t o select “ F ACT OR Y DEF A UL T ” . Each time you press or , one of the available menus appears in the following sequence: The FEA TURES Menu screen will appear .
E-42 OPTIONS W all-mounting unit Horizontal: 0 ° to 15 ° mounting angle P-50WB01 (for horizontal) (both 50" and 61") Hanging unit 0 ° to 15 ° mounting angle (variable) P-50CT01 (for horizontal) (both 50" and 61") produce dealer .
E-43 FA CT OR Y SET TINGS This display can store the latest four types of signals for RGB adjustment value. The fifth input signal will replace the adjustment v alue of the first input signal. T o do this, select a desired signal and follow the instructions in “ Adjusting Screen Position and Size ” on P .
E-44 Model PDS50 03W/PDS5003U/PDS50 04W/PDS50 04U Screen size 50" wide screen: 110.6 cm (W) x 62.2 cm (H) (126.9 cm diagonal) 43.5 inch (W) x 24.5 inch (H) (50.0 inch diagonal) Aspect ratio 16:9 (wide) W eight 45.0 kg / 99.2 lbs Outer dimensions 121.
E-45 Regulation --- PDS5003W • EMC:FCC Part 15 Class A, ICES-003 Class A • CE Safety: EN60065 EMC: EN55022 1998, Class A EN61000-3-2 1995 EN61000-3-3 1995 EN55024 1998 EN61000-4-2 1995 EN61000-4-3.
E-46 A ction • Check whether the power plug is securely inserted into the receptacle. • Check cables for disconnection. • Check whether the power for all input equipment is ON. • Check for connection to wrong terminals or for wrong input mode.
1116, Suenaga, T akatsu-ku, Kawasaki 213-8502, J apan Printed in J apan 81 131530 1 9.
デバイスFujitsu PDS5004Wの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Fujitsu PDS5004Wをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはFujitsu PDS5004Wの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Fujitsu PDS5004Wの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Fujitsu PDS5004Wで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Fujitsu PDS5004Wを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はFujitsu PDS5004Wの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Fujitsu PDS5004Wに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちFujitsu PDS5004Wデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。