AltinexメーカーUT250-101の使用説明書/サービス説明書
ページ先へ移動 of 22
DESIGNER S OLUTIONS MANUAL PART NUMBER: 400 - 0503 - 001 UNDER T ABLE 8x4 VGA + AU DIO MA TRIX SW ITCHER WITH SHOW ME + RS - 232 AU TO - SWITCHER USER’S GUIDE UT250 - 101.
DESIGNER SOLUTIONS 400 - 0503 - 001 1 TA BLE OF CONTENTS Page PRECAUTIONS / SAFETY WARNINGS ............... 2 GENERAL .......................................................... 2 HANDLING ........................................................ 2 CLEANING .
DESIGNER SOLUTIONS 400 - 0503 - 001 2 PRECAUTIONS / SAFETY WARNINGS 1 Please read this manual carefully before using your UT 250 - 101 and keep it handy for future refere nce. These safety instructions are to ensure the long life of your UT250 - 101 and to prevent fire and shock hazards.
DESIGNER SOLUTIONS 400 - 0503 - 001 3 ABOUT YOUR UT250 - 101 2 UT250 - 101 Under Table 8x4 VGA+Audio Matrix Switcher with “Show Me” Ke ys+ RS - 232 Auto - Sw itcher The UT250 - 101 is an 8x4 Video+Audio Matrix Switcher designed to be mounted under a table as part of an integrated audiovisual system.
DESIGNER SOLUTIONS 400 - 0503 - 001 4 TECHNICAL SPECIFICATIONS 3 Specifications are subject to change. See www.altinex.com for up - to - date information. FEATURES/ DESCRIPTION UT250 - 101 Input Connectors Computer Video 15 - pin HD female (8 ) Stereo Audio (mono out) 3.
DESIGNER SOLUTIONS 400 - 0503 - 001 5 MECHANICAL UT250 - 101 Min im um Table Thickness 0.5 in (13 mm) Maximum Table Thickness None Length 9.9 in (2 51 mm) Wi dth 8.1 in (206 mm) Height (body) 1.3 in (33 mm) Height (with cable support) 6.1 in (154 mm) Material Aluminum Finish Silver Net W eight 2.
DESIGNER SOLUTIONS 400 - 0503 - 001 6 PRODUCT DESCRIPTION 4 3.5 mm F (8) AUDIO IN 5-PIN TERMINAL BLOCK (1) AUDIO OUT VIDEO IN 15-PIN HD F (8) VIDEO OUT 15-PIN HD F (4) RJ-45 HD F (4) TWISTED PAIR OUT .
DESIGNER SOLUTIONS 400 - 0503 - 001 7 AP PLICATION DIAGRAMS 5 DIAGRAM 1 : TYPICA L SETUP.
DESIGNER SOLUTIONS 400 - 0503 - 001 8 DIAGRAM 2 : INTERNAL VIEW.
DESIGNER SOLUTIONS 400 - 0503 - 001 9 DIAGRAM 3 : DIM EN SIONS 1.2" [29 mm] 9.9" [251 mm] 3.8" [97 mm] 3.8" [97 mm] 8.1" [206 mm].
DESIGNER SOLUTIONS 400 - 0503 - 001 10 DIAGRAM 4 : CABLE SUPPORT 1.3" [33 mm] 6.1" [154 mm] TABLETOP.
DESIGNER SOLUTIONS 400 - 0503 - 001 11 DIAGRAM 5 : INST AL LA TION TABLETOP MOUNT TO UT250-101 TO THE UNDERSIDE OF THE TABLE USING THE 6 SCREWS PROVIDED SPRING OPEN THE CABLE SUPPORT TO ALLOW THE MOUN.
DESIGNER SOLUTIONS 400 - 0503 - 001 12 DIAGRAM 6 : OUTPUT SELECT WIRING.
DESIGNER SOLUTIONS 400 - 0503 - 001 13 INSTALLING YOUR UT250 - 101 6 Step 1. Decide how the UT 250 - 101 will be controlled: using contact closures on the Output Select Controls, through computer control usi ng the RS - 232 input, using auto - switching, or all 3 methods.
DESIGNER SOLUTIONS 400 - 0503 - 001 14 7. 2 RS - 232 CONTROL The UT 250 - 101 has many advanced remote - control capabilities accessib le through standard RS - 232 communication. Control may be accomplished through a computer, control system, or any device capable of RS - 232 communication.
DESIGNER SOLUTIONS 400 - 0503 - 001 15 2. [CLR] T his command resets the UT 250 - 101 to the last saved configuration. Command Format: [CLR] Example: Clear the UT250 - 101 by sending [CLR ]. Any commands that were sent to the UT 250 - 101 using the [.
DESIGNER SOLUTIONS 400 - 0503 - 001 16 9. [InO*] This command connects one input to all outputs . Com mand Format: [ InO* ] n = Input No. (m = # from 1 to 8) Example: Connect Input 1 to all outputs by sending [I1O*] . Input 1 is then connected to Outputs 1A, 1B, 2A, and 2B.
DESIGNER SOLUTIONS 400 - 0503 - 001 17 Example: Send the command [AUTO2] to the UT 250 - 101 . If a video input signal is connected to any of the inputs, that signal will be connected to Outputs 2A and 2B only. A valid v ideo signal on Input 1 takes precedence over Input 2, Input 2 over Input 3 , and so on.
DESIGNER SOLUTIONS 400 - 0503 - 001 18 20. [...S] This command saves the configuration command being sent in memory. Send the command [I1O*S] to switch IN 1 to all outputs and save the setting. After power - up or [CLR] , IN 1 will be connected to all outputs.
DESIGNER SOLUTIONS 400 - 0503 - 001 19 7. 4 . SUMMARY OF COMMANDS 1) [STA TU S] Display card status 2) [CLR] Reset card to defaults 3) [VER] Display firmware version 4) [ONmX] Turn ON single output 5).
DESIGNER SOLUTIONS 400 - 0503 - 001 20 8.3 NO RESPONSE Cause 1: The unit is n ot recognized. Solution: Reset the unit by turning the system power off and then on again. Send the [ STATUS ] command to see if there is communication with the unit . If there is no feedback, see Cause 2.
DESIGNER SOLUTIONS 400 - 0503 - 001 21 ALTINEX POLICIES 9 9.1 LIMITED WA RRANTY/RETURN POLIC IES Please see the ALTINEX website at www.altinex.com for details on warranty and return policies. 9.2 CONTA CT INFORMA TION ALTINEX, Inc. 592 Apollo Street Brea, CA 92821 USA TEL: 714 990 - 2300 TOLL FREE: 1- 800 - ALTINEX WEB: www.
デバイスAltinex UT250-101の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Altinex UT250-101をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはAltinex UT250-101の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Altinex UT250-101の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Altinex UT250-101で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Altinex UT250-101を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はAltinex UT250-101の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Altinex UT250-101に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちAltinex UT250-101デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。